equipment sourcebook - Loctite.ph

DISPENSINGHand Held HotMelt Applicators1 3 ⁄ 4 INCH SPRAYPAC ® AND POLYSHOT APPLICATORSLOCTITE ® HYSOL 175-AIR / 175-AIR-HTPNEUMATIC APPLICATORSItem Numbers: 98036 and 98040The Loctite® Hysol 175-AIR and 175-AIR-HT (High Temperature forPolyamides) are industrial grade, electrically heated, hand heldpneumatic hot melt applicators. These high capacity dispensers arerugged and designed for heavy duty work. The dispense quantity andtiming are pneumatically controlled with the ergonomic triggermechanism, greatly minimizing operator fatigue.Features:• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Pneumatically powered actuation to reduce operator fatigue• High melt rate for maximum output• Completely enclosed heater housing for maximum safety• Fixed precision thermostat temperaturecontrol for consistent heatingTheory of OperationThe dispense rate is controlled bythe air pressure, and thetiming is controlled by thetrigger mechanism.Pneumatically powereddispensing reducesoperator fatigue.TECHNICAL SPECIFICATIONSPRODUCT Loctite ® Hysol 175-AIR Loctite ® Hysol 175-AIR-HTItem Numbers 98036 98040Voltage110/120 VAC; 50/60 HzRequiredUtilitiesPower500 wattsAir Input45 to 100 psiNominal Stick Diameter1 3 ⁄4" Polyshot Size2.6" W x 12.1" L x 9.5" HWeight3.89 lbs.Power Cord Length 10 feet (120")Maximum Extension Cord65 feetWarm-Up Time10 minutesDispense PowerElectricDispense Melt Rate8.8 lbs./hourDispense Temperature 195°C 215°CApplicator Adhesive Capacity0.125 lbs.Wire Cross-Section16 a.w.g. minimumHot Melt Chemistry EVA hot melt sticks Polyamide hot melts sticksParts Included(1) Hysol 175-AIR or Hysol 175-AIR-HT Applicator(1) Plastic Stand (1) Valve Body Air Line Adapter(1) Standard Nozzle (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.Additional Accessories Sold Separately98042 –Loctite ® HotMelt BenchMount Kit98043 – Loctite ® HotMelt Pneumatic Timer985397 –Loctite ® AirLine Filter,Regulator, GaugeLOCTITE ® HYSOL 175-SPRAY / 175-SPRAY-HT PNEUMATIC APPLICATORSItem Numbers: 98037 and 98041The Loctite® Hysol 175-SPRAY and 175-SPRAY-HT (HighTemperature for Polyamides) are industrial grade, electricallyheated, hand held, pneumatic hot melt applicators. Fine to coarsespray pattern control is possible with a simple air rate adjustmentknob. These high capacity dispensers are rugged and designed forheavy duty work. The dispense quantity and timing arepneumatically controlled with the ergonomic trigger mechanism,greatly minimizing operator fatigue.Features:• Adjustable flow control for tailoring the spray pattern• Patented spray technology for small or large spray pattern• Automatic end-of-cycle purge to prevent nozzle clogging• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Pneumatically powered actuation to reduce operator fatigue• High melt rate for maximum output• Completely enclosed heater housing for maximum safety• Fixed precision thermostat temperature controlfor consistent heatingTheory of OperationBy using the air flow control, the spraypattern can be varied from a narrow toa wide spiral pattern. The dispenserate is controlled by the airpressure, and the timing iscontrolled with the triggermechanism. Pneumaticallypowered dispensingreduces operator fatigue.TECHNICAL SPECIFICATIONSPRODUCT Hysol 175-SPRAY Hysol 175-SPRAY-HTItem Numbers 98037 98041Voltage110/120 VA; 50/60 HzRequiredUtilitiesPower500 wattsAir Input45 to 100 psiSpray PatternUltra-wide spray nozzle: 1.5" minimum / 6" maximumStandard medium spray nozzle: 1.25" minimum / 5" maximumNarrow spray nozzle: 0.5" minimum / 1.25" maximumNominal Stick Diameter1 3 ⁄4" SprayPac ® SticksSize2.6" W x 12.1" L x 9.5" HWeight4 lbs.Power Cord Length 10 feet (120")Maximum Extension Cord65 feetWarm-Up Time10 minutesDispense PowerElectricDispense Melt Rate8 lbs./hourDispense Temperature 195°C 215°CApplicator Adhesive Capacity0.125 lbs.Wire Cross-Section16 a.w.g. minimumHot Melt Chemistry EVA Spray hot melt sticks Polyamide Spray hot melt sticksParts Included(1) Hysol 175-SPRAY or Hysol 175-SPRAY-HT Applicator(1) Plastic Stand (1) Valve Body Air Line Adapter(1) Manual (1) Standard Wide Spray NozzleAdditional Information For Hot Melt Nozzles and Accessories, see page 49.Additional Accessories Sold Separately985397 – Loctite ® Air Line Filter, Regulator, Gauge46For additional information and the full line of equipment, visit www.equipment.loctite.com.