equipment sourcebook - Loctite.ph

LOCTITE ® HYSOL 050-LITEItem Number: 916281The Loctite® Hysol 050-LITE Hot Melt Applicator is a hand held, electrically heated dispenser. The dispense quantity and timingare manually controlled with the ergonomic trigger mechanism. This applicator weighs less than a pound, and is ideal for hobby,craft and light duty industrial applications.Features:• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Completely enclosed heater housing for maximum safety• State-of-the-art, self-regulating heaterfor accuracy in temperature control• Electrically double insulatedfor additional safetyTheory of OperationThe dispense rate andtiming are manuallycontrolled with thetrigger mechanism.NEWTECHNICAL SPECIFICATIONSRequired Voltage100/240 VAC; 50/60 HzUtilities Power400 W heat up, 45 W operating, 20 W restNominal Stick Diameter1 ⁄2" Superstick Size1.5" W x 8" L x 6.5" HWeight0.8 lbs.Dispense PowerManualPower Cord Length 6.5 feet (78")Maximum Extension Cord65 feetWarm-Up Time5 to 7 minutesDispense Melt Rate1.5 lbs./hourDispense Temperature 204°CHot Melt ChemistryEVA and Polyolefin hot melt sticksParts Included(1) Hysol 050-LITE Hot Melt Applicator(1) Standard Nozzle (1) Wire Stand (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.DISPENSING Hand Held HotMelt Applicators3⁄ 4 INCH MAXISTICK DISPENSERSLOCTITE ® HYSOL 075 / 075-LTItem Numbers: 98033 and 98034The Loctite® Hysol 075 and 075 -LT (for CoolMelt) are industrial grade, hand held, hot melt applicators. Electrically heated, bothunits are lightweight and easy to use. The Loctite® Hysol 075 features a market leading dispense rate while both units offer extralarge adhesive loading capacity. The dispense quantity and timing are manually controlled with the ergonomic trigger mechanism.Features:• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Full-hand trigger for minimized operator fatigue• Completely enclosed heater housing for maximum safety• Fast heat up time for virtually immediate use• Highest output, hand held dispenser in its class• Fixed precision thermostat temperature controlfor consistent heating• Thermal fuse protection for additional safety• Multiple stick loading with a detachabletop-mounted speed loader (included)Theory of OperationThe dispense rate and timing aremanually controlled with the triggermechanism. A high adhesivedispense rate, a large adhesiveloading capacity and easeof application are thetrademarks ofthis applicator.TECHNICAL SPECIFICATIONSPRODUCT Loctite ® Hysol 075 Loctite ® Hysol 075-LTItem Numbers 98033 98034Required Voltage120 VAC; 60 Hz; 120V; 3.3 amp single phaseUtilities Power400 wattsNominal Stick Diameter3⁄4" Maxistick Size1.94" W x 12.5" L x 8.25" HWeight1.9 lbs.Power Cord Length 6.5 feet (78")Maximum Extension Cord65 feetWarm-Up Time5 minutesDispense PowerManualDispense Melt Rate 9 lbs./hour 9 lbs./hourDispense Temperature 182°C 121°CApplicator Adhesive Capacity0.12 lbs.Wire Cross-Section16 a.w.g. minimumHot Melt ChemistryEVA hot melt sticksLoctite ® Hysol ® CoolMelt EVA hot melt sticksParts Included (1) Hysol 075 or 075-LT Applicator (1) Speed Loader(1) Plastic Dispenser Stand (1) Standard Nozzle(2) Stand-Off Wings (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.For additional information and the full line of equipment, visit www.equipment.loctite.com.45