equipment sourcebook - Loctite.ph

More documents

Recommendations

Info

DISPENSINGHand Held HotMelt Applicators1⁄ 2 INCH SUPERSTICK DISPENSERSLOCTITE ® HYSOL 050A / 050 / 050-HTItem Numbers: 916282, 98544 and 98545Loctite® industrial grade 1 ⁄2" stick EVA and polyolefin hot melt applicators are now available in two styles to meet your preferredgrip and comfort. Loctite® Hysol 050 and 050A are both lightweight and easy to use. Electrically heated, lightweight and eachwith their own ergonomic, easy pull triggers ensure operator comfort for long term high performance and reliability. The Loctite®Hysol 050-HT model is also available for polyamide hot melts.Features:• Lightweight, well balanced, and ergonomically designed easypull triggers for operator comfort and application control• Fast heat up time for virtually immediate use• Completely enclosed heater housing for maximum safety• Fixed precision thermostat temperature controlfor consistent heatingTheory of OperationThe dispense rate and timing are manually controlled with thetrigger mechanism.Items98544 and 98545PRODUCTTECHNICAL SPECIFICATIONSLoctite ®Hysol 050ALoctite ®Hysol 050Loctite ®Hysol 050-HTItem Number 916282 98544 98545Required Voltage120 VAC; 60 Hz; single phaseUtilities Power 250 watts 500 wattsNominal StickDiameter1 ⁄2" Superstick Size 2.0" W x 12.0" L x 6.5" H 3.25" W x 10.75" L x 7.5" HWeight 1.25 lbs. 1.15 lbs.Dispense PowerManualPower Cord Length 6.0 feet (72") 6.5 feet (78")Warm-Up Time 3 to 5 minutes 4 to 5 minutesDispense Melt Rate 4 lbs./hour 3 lbs./hour 4 lbs./hourDispenseTemperature193°C 195°C 215°CHot Melt ChemistryEVA and Polyolefin EVA and Polyolefinhot meltshot meltsPolyamide hot meltsPartsIncludedAdditionalInformation(1) Hysol 050, 050-HT or 050A Hot Melt Applicator(1) Manual (1) Standard Nozzle(1) Plastic Stand (1) Wire HangerFor Hot Melt Nozzles and Accessories, see page 49.NEWNEWItem 916282LOCTITE ® HYSOL 050-GASItem Number: 916268The Loctite® Hysol 050-GAS Hot Melt Applicator is a hand held, cordless system. Commercially available butane gas canisters areused as the source of energy. The dispense quantity and timing are manually controlled with the ergonomic trigger mechanism.Features:• Well balanced and ergonomically designedfor operator comfort and application control• Low actuation force to reduce finger fatigue• Regulated temperature control for consistent heating• Gas powered for portability and versatilityTheory of OperationThe dispense quantity andtiming are manually controlledwith the trigger mechanism.NEWTECHNICAL SPECIFICATIONSRequired Utilities (Fuel)Braun, Calibri, Ronson, Rowenta, or otherhigh quality cigarette lighter fluidsNominal Stick Diameter1 ⁄2" Superstick Size2" W x 8" L x 7.5" HWeight0.7 lbs.Dispense PowerManualWarm-Up Time4 to 7 minutesDispense Melt Rateup to 3 lbs./hourDispense Temperature 195°CHot Melt ChemistryEVA and Polyolefin hot melt sticksParts Included(1) Hysol 050-GAS Hot Melt Applicator(1) Standard Nozzle (1) Plastic Stand (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.44For additional information and the full line of equipment, visit www.equipment.loctite.com.
LOCTITE ® HYSOL 050-LITEItem Number: 916281The Loctite® Hysol 050-LITE Hot Melt Applicator is a hand held, electrically heated dispenser. The dispense quantity and timingare manually controlled with the ergonomic trigger mechanism. This applicator weighs less than a pound, and is ideal for hobby,craft and light duty industrial applications.Features:• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Completely enclosed heater housing for maximum safety• State-of-the-art, self-regulating heaterfor accuracy in temperature control• Electrically double insulatedfor additional safetyTheory of OperationThe dispense rate andtiming are manuallycontrolled with thetrigger mechanism.NEWTECHNICAL SPECIFICATIONSRequired Voltage100/240 VAC; 50/60 HzUtilities Power400 W heat up, 45 W operating, 20 W restNominal Stick Diameter1 ⁄2" Superstick Size1.5" W x 8" L x 6.5" HWeight0.8 lbs.Dispense PowerManualPower Cord Length 6.5 feet (78")Maximum Extension Cord65 feetWarm-Up Time5 to 7 minutesDispense Melt Rate1.5 lbs./hourDispense Temperature 204°CHot Melt ChemistryEVA and Polyolefin hot melt sticksParts Included(1) Hysol 050-LITE Hot Melt Applicator(1) Standard Nozzle (1) Wire Stand (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.DISPENSING Hand Held HotMelt Applicators3⁄ 4 INCH MAXISTICK DISPENSERSLOCTITE ® HYSOL 075 / 075-LTItem Numbers: 98033 and 98034The Loctite® Hysol 075 and 075 -LT (for CoolMelt) are industrial grade, hand held, hot melt applicators. Electrically heated, bothunits are lightweight and easy to use. The Loctite® Hysol 075 features a market leading dispense rate while both units offer extralarge adhesive loading capacity. The dispense quantity and timing are manually controlled with the ergonomic trigger mechanism.Features:• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Full-hand trigger for minimized operator fatigue• Completely enclosed heater housing for maximum safety• Fast heat up time for virtually immediate use• Highest output, hand held dispenser in its class• Fixed precision thermostat temperature controlfor consistent heating• Thermal fuse protection for additional safety• Multiple stick loading with a detachabletop-mounted speed loader (included)Theory of OperationThe dispense rate and timing aremanually controlled with the triggermechanism. A high adhesivedispense rate, a large adhesiveloading capacity and easeof application are thetrademarks ofthis applicator.TECHNICAL SPECIFICATIONSPRODUCT Loctite ® Hysol 075 Loctite ® Hysol 075-LTItem Numbers 98033 98034Required Voltage120 VAC; 60 Hz; 120V; 3.3 amp single phaseUtilities Power400 wattsNominal Stick Diameter3⁄4" Maxistick Size1.94" W x 12.5" L x 8.25" HWeight1.9 lbs.Power Cord Length 6.5 feet (78")Maximum Extension Cord65 feetWarm-Up Time5 minutesDispense PowerManualDispense Melt Rate 9 lbs./hour 9 lbs./hourDispense Temperature 182°C 121°CApplicator Adhesive Capacity0.12 lbs.Wire Cross-Section16 a.w.g. minimumHot Melt ChemistryEVA hot melt sticksLoctite ® Hysol ® CoolMelt EVA hot melt sticksParts Included (1) Hysol 075 or 075-LT Applicator (1) Speed Loader(1) Plastic Dispenser Stand (1) Standard Nozzle(2) Stand-Off Wings (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.For additional information and the full line of equipment, visit www.equipment.loctite.com.45
Page 1 and 2: theequipmentsourcebook2007volume 6
Page 3 and 4: Table of ContentsINTRODUCTIONEQUIPM
Page 6 and 7: Equipment ServiceSolutionsINTRODUCT
Page 8 and 9: Dispense SystemsDISPENSINGVOLUMETRI
Page 10 and 11: DISPENSINGDispense SystemsLOCTITE
Page 12 and 13: DISPENSINGDispense SystemsLoctite
Page 14 and 15: DISPENSINGDispense SystemsLOCTITE
Page 16 and 17: Dispense SystemsDISPENSINGTUBE BOND
Page 18 and 19: Controllers &ReservoirsDISPENSINGMU
Page 20 and 21: Controllers &ReservoirsDISPENSINGSI
Page 22 and 23: Controllers &ReservoirsDISPENSINGRE
Page 24 and 25: Controllers &ReservoirsDISPENSINGLO
Page 26 and 27: DISPENSINGBOTTLE DISPENSINGLOCTITE
Page 28 and 29: Hand HeldApplicatorsDISPENSINGLOCTI
Page 30 and 31: Hand HeldApplicatorsDISPENSINGLOCTI
Page 32 and 33: DISPENSINGTwo-Part VolumetricDispen
Page 34 and 35: DISPENSINGTwo-Part Volumetric Dispe
Page 36 and 37: Two-Part VolumetricDispensingMeter
Page 38 and 39: Two-Part VolumetricDispensingMeter
Page 40 and 41: DISPENSINGLoctite® DuraPump Select
Page 42 and 43: DISPENSINGLoctite® Brand Meter Mix
Page 44 and 45: DISPENSINGVariable Ratio Systems fo
Page 48 and 49: DISPENSINGHand Held HotMelt Applica
Page 50 and 51: Hand Held HotMelt ApplicatorsDISPEN
Page 52 and 53: DISPENSINGBulk Hot Melt SystemsBulk
Page 54 and 55: Bulk Hot MeltSystemsDISPENSINGLOCTI
Page 56 and 57: Bulk Hot MeltSystemsDISPENSINGLOCTI
Page 58 and 59: DISPENSINGLoctite® Brand Extrusion
Page 60 and 61: DISPENSINGHand Held ValvesHand Held
Page 62 and 63: Hand Held ValvesDISPENSINGGENERAL P
Page 64 and 65: Hand Held ValvesDISPENSINGPINCH TUB
Page 66 and 67: DISPENSINGValves & PumpsValves & Pu
Page 68 and 69: Valves & PumpsDISPENSINGLOCTITE ®
Page 70 and 71: DISPENSINGValves & PumpsGENERAL DUT
Page 72 and 73: Valves & PumpsDISPENSINGHIGH VISCOS
Page 74 and 75: DISPENSINGValves & PumpsPOSITIVE DI
Page 76 and 77: Valves & Pumps DISPENSINGLoctite®
Page 78 and 79: DISPENSINGPail PumpsLOCTITE ® HIGH
Page 80: DISPENSINGMonitoring SystemsMonitor
Page 83 and 84: Tapered Dispense Tips1 1 ⁄4" POLY
Page 85 and 86: Loctite® Brand Syringe Accessories
Page 87 and 88: AccessoryPARENT PRODUCTItem Numbers
Page 89 and 90: LOCTITE ® 200 BENCHTOP ROBOT STATI
Page 91 and 92: LOCTITE ® 400 BENCHTOP ROBOT STATI
Page 93 and 94: LOCTITEHeading ® S440 SERIES SCARA
Page 95 and 96: MOTIONCONTROLLOCTITE ® ADVANCING S
Page 97 and 98:
Loctite® Brand Mounting Hardware,W
Page 99 and 100:
O-Ring FabricationO-RINGFABRICATION
Page 101 and 102:
LIGHT CURE SolutionsPRODUCTItemNumb
Page 103 and 104:
LOCTITE ® 7700-HD LED LIGHT SOURCE
Page 105 and 106:
Wand SystemsLoctite® ZETA® light
Page 107 and 108:
LOCTITE ® ZETA ® 7735 UV WAND SYS
Page 109 and 110:
LOCTITE ® ZETA ® 7760 UV WAND SYS
Page 111 and 112:
LOCTITE ® ZETA ® 7401 UV CHAMBERI
Page 113 and 114:
LIGHT CURE Cure Chambers &Flood Sys
Page 115 and 116:
Light MetersDecreased radiant power
Page 117 and 118:
Cure ConveyorsLoctite® brand cure
Page 119 and 120:
Light SourcesOur light sources and
Page 121 and 122:
Index119INDEXFor additional informa
Page 123 and 124:
121INDEXFor additional information
Page 125 and 126:
Page 127:
show all

equipment sourcebook - Loctite.ph

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?