equipment sourcebook - Loctite.ph

DISPENSING Two-Part VolumetricDispensingMeter Mix SystemsLOCTITE ® DURAPUMP PROGRAMMABLE METER MIX SYSTEMThe Loctite® DuraPump Meter Mix Systems offer superior operating performance and durability for a wide range of twocomponent adhesive chemistries up to 10:1 ratios. These programmable models provide convenient touch screen digital control forshot size, choice of 3 operating modes, and can easily be integrated with a PLC. Its innovative rod displacement pump designinsures excellent shot repeatability, low wear, and allows direct connection to high pressure feed systems. A static mix nozzle canalso be mounted directly on the integrated mixing manifold, eliminatingthe need for a dispense valve in many applications. Optional reservoirs,level controls, hoses, and valves are also available to complete yourspecific process requirements.Programmable Loctite® DuraPump Fixed Ratio SystemsItem Number Mix Ratio Shot Size Range1041649 1:1 0.4 to 28 ml1041644 2:1 0.4 to 21 ml1041639 4:1 0.4 to 18 ml1041638 10:1 0.4 to 15.5 ml1041635 Custom* Will vary based on ratio selected* Custom ratios available from 1:1 up to 9.99:1.NEWFeatures:• Includes 3 modes, including an incremental shot mode, where shots canbe set and dispensed without recharging• No requirement for pump phasing on start-ups; just start up and go• Direct flow shut off, no check valves to repair or replace• Accepts external feed systems up to 2000 psiwithout extraneous accumulators• Superior pump wear life, especially well suited forhighly filled materials• Mixing manifold discharge accepts mix nozzles directly,Utilitieseliminating the need for a valve in many applications• Available with optional low level sensorsDimensionsTheory of OperationThe Loctite® DuraPump Programmable Meter Mix Systemsaccurately meter dual liquid or semi-solid materials throughouta wide range of viscosities and ratios. The Loctite® DuraPumpassembly ensures high precision volumetric displacement at theselected ratio. Shot size is controlled by a touch screen input.Both liquids move simultaneously and separately into a mixingmanifold. A static mix nozzle is attached to the manifold foreffective mixing of two components prior to being applied.WeightDispense Range/CycleCycle RateUsed to DispensePackage TypesParts IncludedAdditional InformationTECHNICAL SPECIFICATIONSElectric: 110/250 VAC; 50-60 HzPneumatic: 80-110 psi27" H x 12.5" W x 12.5" D80 lbs.0.4 to 28 ml (ratio dependent) – see ratio chartUp to 20/minuteTwo-Part Epoxies, Two-Part Acrylics, Two-Part PolyurethanesAny, excluding dual cartridges1) Loctite ® DuraPump Programmable Meter Mix(1) Foot Switch (1) Night Cap (1) Ratio CapFeed system options and accessoriesare sold separately. See page 39.For additional information and the full line of equipment, visit www.equipment.loctite.com.33