equipment sourcebook - Loctite.ph

LOCTITE ® POSI-LINK 50 MLDUAL CARTRIDGE NESTSItem Number: See chartConnects the actuatorto the dual cartridge.Dual Cartridge Nest Features:• No tool cartridge changeover• No contact with adhesive. Disposable syringesare the only component in contact with the adhesiveLoctite ® Posi-Link Dual Cartridge Nest SelectionLOCTITE ® POSI-LINK 200/400 MLDUAL CARTRIDGES NESTSItem Number: See chartConnects the actuatorto the dual cartridge.1:1 / 2:1 – 50 ml Cartridge 10:1 – 50 ml Cartridge 1:1 / 2:1 – 200 ml Cartridge 1:1 / 2:1 – 400 ml Cartridge 10:1 – 400 ml Cartridge USED WITHDISPENSINGTwo-Part VolumetricDispensingDual Cartridge Systems98641 98642 N/A N/A N/AN/A N/A 98662 98663 98664Loctite ® Posi-Link 10-50 ActuatorLoctite ® Posi-Link 200-400 ActuatorTheory of OperationA disposable dual cartridge is effectively used as a dual metering piston/cylinder. Because the individual chambers of a dualcartridge are of a known and constant diameter, a given incremental measurement of the dual pistons will displace a knownvolume of adhesive within each chamber at an exact ratio. This dual cartridge system functions identically to a Loctite® Posi-LinkSyringe System, except that it has 2 plungers within the dispense head. These plungers simultaneously act on 2 chambers withinthe dual cartridge. See Functionality Diagram on page 10.LOCTITE ® PINCH TUBE VALVE Item Number: 97141Features:• Valve attaches directly tothe end of thesquare mix nozzle• Provides positive no-dripshut off, using disposablepinch tube elementsFOR 50 ML DUAL CARTRIDGES:OPTIONAL: 97141 – Valve +97541 – 10 pack Replacement Tube Inserts + 98671 – Solenoid ValveFOR 200/400 ML DUAL CARTRIDGES:REQUIRED: 97141 – Valve +97541 – 10 pack Replacement Tube Inserts(98671 – Solenoid Valve included with actuator)Loctite ® Posi-Link 10-50 System, Integrated Robotic Solution usinga 50 ml dual cartridge, and showing wall-mounted actuator.PRODUCTTECHNICAL SPECIFICATIONSLoctite ® Posi-Link ControllerLoctite ® Posi-Link 10-50 ActuatorLoctite ® Posi-Link 200-400 ActuatorItem Number 98377 98379 98380PowerSource9' communicationcable100/240 VAC;47/60 Hz100/240 VAC;47/60 HzDimensions 5.375" H x 6" D x 6" W 34" H x 4" D x 5" W 34" H x 4" D x 5" WTotal Weight 2 lbs. 13 lbs. 20 lbs.Dispense HeadWeight(Includes Nest andN/A 2.0 lbs. 10.0 lbs.Pinch Tube Valve)Air Supply N/A 40 to 100 psi 40 to 100 psiPosi-Link Electro/Hydraulic N/A 7 feet 7 feetTetherMinimumDispense VolumeN/A 0.001 ml 0.01 mlMaximumDispense RateMaximumCycle RateUsed toDispenseN/A 0.4 ml/second 1.0 ml/secondN/A 1 cycle per second 1 cycle per secondN/AParts Included (1) Loctite ®Posi-Link Controller(1) Foot SwitchAdditionalInformationAll dual 50 ml cartridge1:1 / 2:1 / 10:1ratio adhesivesAll dual 200 or 400 mlcartridge 1:1 / 2:1 / 10:1ratio adhesives(1) Loctite ® Posi-Link Actuator(1) 9' Controller/Actuator Signal Cord(1) 110 Power Cord(1) Air Inlet Pressure Regulator Gauge(1) Wall or Table Mounting Bracket(1) Instruction ManualFor Spare Parts and Accessories, see pages 84-85.For Static Mix Nozzles and Accessories, see page 82.For additional information and the full line of equipment, visit www.equipment.loctite.com.31