equipment sourcebook - Loctite.ph

LOCTITE ® 300 ML CARTRIDGE PUSHERItem Number: 98022The Loctite® 300 ml Cartridge Pusher is designed for dispensing low to medium viscosity products. The cartridge pushermechanically applies pressure to the cartridge plunger using a pneumatically driven ram, removing the possibility of airentrapment in the cartridge. There is a low level sensor that is compatible with Loctite® brand controllers (items 97101, 97123,or 1022006). An automatic dispense valve will also be required for final application of the product. Controllers and valves aresold separately. Not recommended for high viscosity or paste materials.Features:• Mechanical ram provides product pressure, eliminating risk ofinducing air into product, as is the case with pneumatic dispensers• Equipped with a low level sensor that can be integrated to a PLCor any Loctite® brand digital controller• A grease reservoir is included which continually applies a thin filmof grease to the plunger shaft to maintain free operation of the ram• Integral air pressure regulator/gauge• The cartridge retainer can be removed for easy maintenance• Can be mounted vertically or horizontallyTheory of OperationThe Loctite® 300 ml Cartridge Pusher is a front-loaded,free-standing device that can be coupled with a Loctite® DigitalDispense Controller, Loctite® Digital Multi-Functional Controller,or integrated into an existing work cell. Pressurized air issupplied to the air regulator to control the air pressure thatflows into the ram cylinder. A hand lever, pneumatic, three-wayvalve channels the pressurized air into the pneumatic cylinder.Moving the hand lever toward the cartridge sleeve causes thepiston to move forward, pressing product out of the 300 mlcartridge through a product feed line. Moving the hand leverup toward the air cylinder causes the piston to retract. A reedswitch assembly is located on the air cylinder, equipped withan LED indicator. Once activated, the LED indicator will lightup and the switch will communicate a low level conditionto a Loctite® Digital Dispense Controller or Loctite® DigitalMulti-Functional Controller. The reed switch is activated by apermanent magnet located on the piston within the air cylinder.Air InletAir InputProduct ViscosityDimensionsWeightTECHNICAL SPECIFICATIONS1 ⁄8" female NPT50 psi maximumLow to Medium Gel Adhesives8.375" H x 5.8" W x 25.375" Length10.6 lbs.Used to DispenseGel Adhesives, Anaerobic Gasketing,Light Cure/Acrylics, Low Viscosity SiliconesPackage Types & Sizes250 ml tube / 300 ml cartridgeParts Included (1) 300 ml Cartridge Pusher (1) Fitting Kit (1) ManualAdditional Information For Spare Parts, see pages 84-85.For Cartridge Accessories, see page 81.For Dispense Tips, see pages 80-81.DISPENSING Controllers &ReservoirsLOCTITE ® 2.25 GALLON PRESSURE RESERVOIRItem Number: 98359The Loctite® 2.25 Gallon Pressure Reservoir is our largest stand-alone reservoir designedfor use with Loctite® brand pressure-time dispense systems, sold separately, and willaccommodate up to 2 kg packages. The unit is made of heavy, deep-drawn, one-piece steelconstruction and comes equipped with a pressure regulator, gauge, pressure safety reliefvalve, and product feed line connector.Features:• Rugged construction• 0 to 60 psi regulator• Pressure safety relief valve• 1 ⁄4" NPT air line and 1 ⁄4" product feed line connectorsTECHNICAL SPECIFICATIONSPressure Range / Capacity0 to 60 psi / 2.25 gallonsProduct ViscosityLow to MediumDimensions / Weight18.5" H x 12.7" Diameter / 17 lbs.Internal Reservoir9.5" H x 9.3" DiameterUsed to DispenseGel Adhesives, Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersPackage Types & Sizes 250 ml, 1 lb., 1 L, 2 kg bottles / 200 g squeeze tubeParts Included (1) 2.25 Gallon Pressure Reservoir (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For additional information and the full line of equipment, visit www.equipment.loctite.com.21