equipment sourcebook - Loctite.ph

More documents

Recommendations

Info

Controllers &ReservoirsDISPENSINGRESERVOIRSLOCTITE ® BOND-A-MATIC ® 3000 RESERVOIRItem Numbers: 982720, 982721, 982723, 982724, 982726 and 982727The Loctite® Bond-A-Matic® 3000 Reservoirs, our most versatile and popular units,can be used in a wide array of dispensing applications. These units are available in2 dispensing pressure ranges for a wide range of product viscosities. The reservoircan also be equipped with low level sensors that send an electronic signal toa Loctite® brand controller (items 97101, 97123 or 1022006), sold separately.Features:• User-friendly design• Can accommodate a variety of Loctite® brand product packages• Available with optional low level sensor• All pneumatic operationTheory of OperationOperation of this unit is easy. An operator will place abottle of product in the reservoir and tighten the threehandles on the cover. The unit is then pressurized to theappropriate setting for optimal flow control. The productis dispensed through an applicator, which when actuated,allows material to flow. Flow rate of the product isdependent on the valve selected, pressure, productviscosity, and needle size.Air OutputTECHNICAL SPECIFICATIONS982720: 0 to 15 psi 982723: 0 to 100 psi982721: 0 to 15 psi 982724: 0 to 100 psi982726: 0 to 15 psi 982727: 0 to 100 psiProduct Viscosity 0 to 3,000 cP > 3,000 cP982720: 24 VDC 982723: 24 VDCLow LevelSensing982721: 110 VAC 982724: 110 VAC982726: N/A 982727: N/ADimensions13.25" H x 9.875" W x 14.125" DInternal Reservoir10" H x 5" DiameterWeight18 lbs. unfilledUsed to DispenseGel Adhesives, Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersPackage Types& Sizes250 ml, 1 lb., 1 L, 2 kg bottles / 200 g squeeze tubeParts Included (1) Bond-A-Matic ® 3000 Reservoir with 1 ⁄4" Tank Fitting(1) 1 ⁄4" Feed Line and Spring Strain Relief(1) Anti-Bubble Tip and Sleeve(1) Squeeze Tube Adapter and Nut/Ferrule (982723 / 982727 only)(1) 3 ⁄8" Tank Fitting and Spring Strain Relief (982723 / 982727 only)(1) Manual (1) Tube of Silicone GreaseAdditionalInformationFor Spare Parts and Accessories, see pages 84-85.Additional Accessories Sold SeparatelyAny Loctite ® Brand Dispensing Valve984480 – Reservoir Liner / 200022 – Empty 1 lb. HDPE Bottle20For additional information and the full line of equipment, visit www.equipment.loctite.com.
LOCTITE ® 300 ML CARTRIDGE PUSHERItem Number: 98022The Loctite® 300 ml Cartridge Pusher is designed for dispensing low to medium viscosity products. The cartridge pushermechanically applies pressure to the cartridge plunger using a pneumatically driven ram, removing the possibility of airentrapment in the cartridge. There is a low level sensor that is compatible with Loctite® brand controllers (items 97101, 97123,or 1022006). An automatic dispense valve will also be required for final application of the product. Controllers and valves aresold separately. Not recommended for high viscosity or paste materials.Features:• Mechanical ram provides product pressure, eliminating risk ofinducing air into product, as is the case with pneumatic dispensers• Equipped with a low level sensor that can be integrated to a PLCor any Loctite® brand digital controller• A grease reservoir is included which continually applies a thin filmof grease to the plunger shaft to maintain free operation of the ram• Integral air pressure regulator/gauge• The cartridge retainer can be removed for easy maintenance• Can be mounted vertically or horizontallyTheory of OperationThe Loctite® 300 ml Cartridge Pusher is a front-loaded,free-standing device that can be coupled with a Loctite® DigitalDispense Controller, Loctite® Digital Multi-Functional Controller,or integrated into an existing work cell. Pressurized air issupplied to the air regulator to control the air pressure thatflows into the ram cylinder. A hand lever, pneumatic, three-wayvalve channels the pressurized air into the pneumatic cylinder.Moving the hand lever toward the cartridge sleeve causes thepiston to move forward, pressing product out of the 300 mlcartridge through a product feed line. Moving the hand leverup toward the air cylinder causes the piston to retract. A reedswitch assembly is located on the air cylinder, equipped withan LED indicator. Once activated, the LED indicator will lightup and the switch will communicate a low level conditionto a Loctite® Digital Dispense Controller or Loctite® DigitalMulti-Functional Controller. The reed switch is activated by apermanent magnet located on the piston within the air cylinder.Air InletAir InputProduct ViscosityDimensionsWeightTECHNICAL SPECIFICATIONS1 ⁄8" female NPT50 psi maximumLow to Medium Gel Adhesives8.375" H x 5.8" W x 25.375" Length10.6 lbs.Used to DispenseGel Adhesives, Anaerobic Gasketing,Light Cure/Acrylics, Low Viscosity SiliconesPackage Types & Sizes250 ml tube / 300 ml cartridgeParts Included (1) 300 ml Cartridge Pusher (1) Fitting Kit (1) ManualAdditional Information For Spare Parts, see pages 84-85.For Cartridge Accessories, see page 81.For Dispense Tips, see pages 80-81.DISPENSING Controllers &ReservoirsLOCTITE ® 2.25 GALLON PRESSURE RESERVOIRItem Number: 98359The Loctite® 2.25 Gallon Pressure Reservoir is our largest stand-alone reservoir designedfor use with Loctite® brand pressure-time dispense systems, sold separately, and willaccommodate up to 2 kg packages. The unit is made of heavy, deep-drawn, one-piece steelconstruction and comes equipped with a pressure regulator, gauge, pressure safety reliefvalve, and product feed line connector.Features:• Rugged construction• 0 to 60 psi regulator• Pressure safety relief valve• 1 ⁄4" NPT air line and 1 ⁄4" product feed line connectorsTECHNICAL SPECIFICATIONSPressure Range / Capacity0 to 60 psi / 2.25 gallonsProduct ViscosityLow to MediumDimensions / Weight18.5" H x 12.7" Diameter / 17 lbs.Internal Reservoir9.5" H x 9.3" DiameterUsed to DispenseGel Adhesives, Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersPackage Types & Sizes 250 ml, 1 lb., 1 L, 2 kg bottles / 200 g squeeze tubeParts Included (1) 2.25 Gallon Pressure Reservoir (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For additional information and the full line of equipment, visit www.equipment.loctite.com.21
Page 1 and 2: theequipmentsourcebook2007volume 6
Page 3 and 4: Table of ContentsINTRODUCTIONEQUIPM
Page 6 and 7: Equipment ServiceSolutionsINTRODUCT
Page 8 and 9: Dispense SystemsDISPENSINGVOLUMETRI
Page 10 and 11: DISPENSINGDispense SystemsLOCTITE
Page 12 and 13: DISPENSINGDispense SystemsLoctite
Page 14 and 15: DISPENSINGDispense SystemsLOCTITE
Page 16 and 17: Dispense SystemsDISPENSINGTUBE BOND
Page 18 and 19: Controllers &ReservoirsDISPENSINGMU
Page 20 and 21: Controllers &ReservoirsDISPENSINGSI
Page 24 and 25: Controllers &ReservoirsDISPENSINGLO
Page 26 and 27: DISPENSINGBOTTLE DISPENSINGLOCTITE
Page 28 and 29: Hand HeldApplicatorsDISPENSINGLOCTI
Page 30 and 31: Hand HeldApplicatorsDISPENSINGLOCTI
Page 32 and 33: DISPENSINGTwo-Part VolumetricDispen
Page 34 and 35: DISPENSINGTwo-Part Volumetric Dispe
Page 36 and 37: Two-Part VolumetricDispensingMeter
Page 38 and 39: Two-Part VolumetricDispensingMeter
Page 40 and 41: DISPENSINGLoctite® DuraPump Select
Page 42 and 43: DISPENSINGLoctite® Brand Meter Mix
Page 44 and 45: DISPENSINGVariable Ratio Systems fo
Page 46 and 47: DISPENSINGHand Held HotMelt Applica
Page 48 and 49: DISPENSINGHand Held HotMelt Applica
Page 50 and 51: Hand Held HotMelt ApplicatorsDISPEN
Page 52 and 53: DISPENSINGBulk Hot Melt SystemsBulk
Page 54 and 55: Bulk Hot MeltSystemsDISPENSINGLOCTI
Page 56 and 57: Bulk Hot MeltSystemsDISPENSINGLOCTI
Page 58 and 59: DISPENSINGLoctite® Brand Extrusion
Page 60 and 61: DISPENSINGHand Held ValvesHand Held
Page 62 and 63: Hand Held ValvesDISPENSINGGENERAL P
Page 64 and 65: Hand Held ValvesDISPENSINGPINCH TUB
Page 66 and 67: DISPENSINGValves & PumpsValves & Pu
Page 68 and 69: Valves & PumpsDISPENSINGLOCTITE ®
Page 70 and 71: DISPENSINGValves & PumpsGENERAL DUT
Page 72 and 73:
Valves & PumpsDISPENSINGHIGH VISCOS
Page 74 and 75:
DISPENSINGValves & PumpsPOSITIVE DI
Page 76 and 77:
Valves & Pumps DISPENSINGLoctite®
Page 78 and 79:
DISPENSINGPail PumpsLOCTITE ® HIGH
Page 80:
DISPENSINGMonitoring SystemsMonitor
Page 83 and 84:
Tapered Dispense Tips1 1 ⁄4" POLY
Page 85 and 86:
Loctite® Brand Syringe Accessories
Page 87 and 88:
AccessoryPARENT PRODUCTItem Numbers
Page 89 and 90:
LOCTITE ® 200 BENCHTOP ROBOT STATI
Page 91 and 92:
LOCTITE ® 400 BENCHTOP ROBOT STATI
Page 93 and 94:
LOCTITEHeading ® S440 SERIES SCARA
Page 95 and 96:
MOTIONCONTROLLOCTITE ® ADVANCING S
Page 97 and 98:
Loctite® Brand Mounting Hardware,W
Page 99 and 100:
O-Ring FabricationO-RINGFABRICATION
Page 101 and 102:
LIGHT CURE SolutionsPRODUCTItemNumb
Page 103 and 104:
LOCTITE ® 7700-HD LED LIGHT SOURCE
Page 105 and 106:
Wand SystemsLoctite® ZETA® light
Page 107 and 108:
LOCTITE ® ZETA ® 7735 UV WAND SYS
Page 109 and 110:
LOCTITE ® ZETA ® 7760 UV WAND SYS
Page 111 and 112:
LOCTITE ® ZETA ® 7401 UV CHAMBERI
Page 113 and 114:
LIGHT CURE Cure Chambers &Flood Sys
Page 115 and 116:
Light MetersDecreased radiant power
Page 117 and 118:
Cure ConveyorsLoctite® brand cure
Page 119 and 120:
Light SourcesOur light sources and
Page 121 and 122:
Index119INDEXFor additional informa
Page 123 and 124:
121INDEXFor additional information
Page 125 and 126:
Page 127:
show all

equipment sourcebook - Loctite.ph

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?