12.07.2015 Views

equipment sourcebook - Loctite.ph

equipment sourcebook - Loctite.ph

equipment sourcebook - Loctite.ph

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

DISPENSING Controllers &ReservoirsINTEGRATED RESERVOIR CONTROLLERSLOCTITE ® INTEGRATED SEMI-AUTOMATIC DISPENSERItem Numbers: 97007, 97010, 97017 and 97020The <strong>Loctite</strong>® Integrated Semi-Automatic Dispense Systems combine a controller andreservoir into a single unit. These popular units provide a less complex and morecost effective dispensing solution when compared to systems with separatereservoirs and controllers. Combined with the digital timing feature, this unit willprovide precise dispensing control with any <strong>Loctite</strong>® automatic dispense valve orpneumatic hand held applicator, sold separately. The reservoir is large enough toaccept up to 2 kg bottles, and units can be equipped with low level sensing asshown in the chart below.Features:• Equipped with a 0 to 15 psi, or a 0 to 100 psiadjustable pressure regulator• Easy-to-read pressure gauge• Continuous or timed dispense mode from0.01 to 99.9 seconds• Drip funnel for reservoir lid during product changeover• 97017 and 97020 offer low level sensors, and arerecommended when dispensing cyanoacrylate adhesivesTheory of OperationThe unit is connected to an external pneumatic supply, andregulates the adjusted dispensing pressure during theselected dispensing time. A bottle of adhesive is placeddirectly into the integrated reservoir, and the reservoir lid isclamped in place. It is then pressurized using clean, filtereddry air. Air within the reservoir will push down on the liquidin the bottle and force it through the product feed line tothe dispensing valve.TECHNICAL SPECIFICATIONSPower Supply90/260 VAC; 47/63 HzAir InputMinimum 30 psiAir Output97007: 0 to 100 psi 97010: 0 to 15 psi97017: 0 to 100 psi 97020: 0 to 15 psiLow Level Sensing97007: No 97010: No97017: Yes 97020: YesProduct Viscosity > 3,000 cP 0 to 3,000 cPDimensions13.8" H x 14.5" W x 9.2" DReservoir Dimensions4.75" diameter x 9.75" HWeight16.5 lbs. (7.5 kg)Used to DispenseGel Adhesives, Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersPackageTypes & SizesParts IncludedAdditionalInformation250 ml bottle / 1 lb. bottle / 1 L bottle2 kg bottle / 200 g squeeze tube(1) Power Cord (1) Integrated Semi-Automatic Dispenser(1) Manual (1) Foot Switch (3) Drip CupsFor Spare Parts and Accessories, see pages 84-85.For Dispense Tips, see pages 80-81.For additional information and the full line of <strong>equipment</strong>, visit www.<strong>equipment</strong>.loctite.com.19

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!