equipment sourcebook - Loctite.ph

Controllers &ReservoirsDISPENSINGMULTI-FUNCTION CONTROLLERSLOCTITE ® SINGLE CHANNEL AUTOMATIC CONTROLLERItem Number: 97123The Loctite® Single Channel Automatic Controller is a multi-function system foroperating one or two dispense valves while controlling peripheral equipmentsuch as advancing slides and rotor spray units. Process functions are programmedby the front panel keyboard and aided by a visual display. High precision controlis possible with the fine tuning of both time and pressure variables. Control ofreservoir pressure, advancing slide delay, and rotor spray operation can all beselected or removed from use individually. This system can be used with low levelsensors such as Loctite® Bond-A- Matic® reservoirs or integrated into fullyautomatic production lines using the PLC interface.Features:• Fully programmable, independent controllerwith permanent software set-up• Front mounted keyboard and multilingual display foreasy system programming and dispense valve control• Digital pressure readout for precise electronicpressure regulation and monitoring of reservoirand valve dispensing• Digital time display and control of valve dispensing• Capable of controlling one or two dispense valves withadvancing slide and rotor spray unitTheory of OperationOperator pre -programming determines which devices are tobe used for a particular application. Once a particular set-upis selected, valve pressure, open time and advancing slidetiming can all be adjusted to meet a specific dispensing need.Power SupplyAir InputAir OutputNumber ofDispense ValvesDimensionsWeightParts IncludedAdditionalInformationTECHNICAL SPECIFICATIONS90/260 VAC; 47/63 Hz58 to 116 psi (4 to 8 bar)1 to 100 psi (0.1 to 7 bar)2 (Dependent)9.0" H x 5.7" W x 10.2" Diameter6.5 lbs. (3 kg)(1) Automatic Controller (1) Pneumatic Tubing, 6 mm O.D.(1) Power Cord (1) ManualFor Spare Parts and Accessories, see page 84.For Dispense Tips, see pages 80-81.Additional Accessories Sold SeparatelyBond-A-Matic ® 3000 Reservoirs (982720 or 982723)97118 – Loctite ® Advancing Slide (50 mm Stroke)97119 – Loctite ® Advancing Slide (100 mm Stroke)97211 – Loctite ® In-Line Flow Monitor97115 – Loctite ® Electric Rotor SprayNote: If used with advancing slide, only one dispense valve can be controlled.16For additional information and the full line of equipment, visit www.equipment.loctite.com.