equipment sourcebook - Loctite.ph

Light SourcesOur light sources and power supplies provide high intensity ultraviolet light for curinglight cure adhesives and coatings. These units are designed to be integrated into aLoctite® brand conveyor system, or used when the end user provides the conveyor andshielding requirements. Selection of a light source and power supply is based on thebulb type, electrical requirements, and the desired part movement.LIGHT CURE Light SourcesLOCTITE ® ELECTRODELESS LAMP ASSEMBLY AND POWER SUPPLYItem Numbers: 98004 – 208 VAC single phase, 10 amps, 50/60 HzItem Numbers: 98005 – 240 VAC single phase, 10 amps, 50/60 HzThe Loctite® Electrodeless Lamp Assembly comes equipped with a long life 6 inch “H” bulb. The lightsource is compatible with “D”, “V”, “H” and “H+” bulbs to tailor the spectral output of the light to theapplication. Selection of the 98004 or 98005 is based on the electrical capabilities available to the enduser. The Loctite® Electrodeless Lamp Assembly is typically used with the Loctite® ZETA® 7415 UVBenchtop Conveyor.Features:• Designed for use with the Loctite® ZETA® 7415 UV Benchtop Conveyor• Electrodeless bulb technology provides high intensity output• The system is shipped standard with an “H” bulb, but will accept “D”, “V” or“H+” bulbs to fine tune lamp spectral output• 5,000 hours of expected UV bulb life of the “H” bulb, with proper handling and maintenance• High UV output with low IR output results in less heat to the substrateTheory of OperationAn operator will assemble parts witha light curing adhesive or coating andmanually or automatically place thepart under the lamp for cure. Shieldingis obtained through the use of thisassembly with a Loctite® ZETA® 7415Benchtop Conveyor. If used elsewhere,shielding must be provided bythe customer.TECHNICAL SPECIFICATIONS20Spectral Output of “H” BulbPower Supply98004208 VAC single phase;18 amps; 50/60 Hz98005240 VAC single phase;18 amps; 50/60 HzLampFusion H Bulb - 300 W/in.Dimensions19.9" H x 6.6" W x 10.3" DParts Included(1) Fusion Lamp Assembly and Power Supply(1) ManualReplacement Bulb 983470 – Fusion H Bulb - 300 W/in.Additional Accessories Sold SeparatelyWatts per inch1612840200 250 300 350 400 450Wavelength in nm98086 – Loctite ®ZETA ® 7011-ADosimeter-Radiometer983471 –Fusion V Bulb - 300 W/in.983469 –Fusion D Bulb - 300 W/in.983470 –Fusion H Bulb - 300 W/in.For additional information and the full line of equipment, visit www.equipment.loctite.com.117