equipment sourcebook - Loctite.ph

More documents

Recommendations

Info

Light MetersLIGHT CURELOCTITE ® ZETA ® 7021 SPOT RADIOMETERItem Number: 98048The Loctite® ZETA® 7021 Spot Radiometer is a self-contained, electro-optic instrument designed to measure and displaythe UV irradiance emitted by a UV spot curing system. The units displayed are watts per square centimeter (W/cm 2 ).Decreased radiant power related to the degradation of UV lamps, light guides, and reflectors canresult in declines in process efficiency or incomplete curing of UV light curing products. TheLoctite® ZETA® 7021 is designed to provide the operator with instant feedback as to theperformance of the spot curing system. It accepts both 3 mm and 5 mm diameter wands.The unique detachable sensor head requires re-calibration only once per year (vs. every6 months for competitive models). Requires a 9 volt alkaline battery (not included).Features:• Measures UV wand curing system performance• Measures UV lamp performance• Measures light guide degradation• Optimizes dual light guide balancing• Determines proper UV intensity required for curing various materials• Meets ISO-9000 requirements• Calibration is traceable to the National Institute of Standard Technology (NIST)Theory of OperationAn operator will place the UV wand in the opening of the sensor head.The light to be measured will be emitted for approximately 2 to 4 seconds.The reading will immediately be displayed.TECHNICAL SPECIFICATIONSRadiant Power Range 0 to 19.99 W/cm 2Resolution 0.01 W/cm 2AccuracyDisplayReading Exposure TimeSpectral RangePower SourceDimensionsWeightUsed to Measure Output ofParts Included± 5% typical / ± 10% maximum1.0" W x 0.5" H LCD2 to 4 seconds280 to 400 nm (UVA & B region)9 volt alkaline battery (not included)3.0" H x 2.5" W x 1.2" D0.4 lbs.3 mm and 5 mm diameter Wands(1) ZETA ® 7021 Spot Radiometer(1) ManualAdditional Accessories Sold Separately98633 / 98317A / 98157A / 98450 – Loctite ® ZETA ® or Indigo UV Wand Systems114For additional information and the full line of equipment, visit www.equipment.loctite.com.
Cure ConveyorsLoctite® brand cure conveyors are used for continuous or batch processing of assemblies.Each conveyor has a unique set of features designed to meet the challenges of benchtopcuring of light curing adhesives and coatings. Selection of a Loctite® brand cureconveyor is based on the part size, and the required lamp for optimum cure.LIGHT CURE Cure ConveyersLOCTITE ® ZETA ® 7415 UV BENCHTOP CONVEYORItem Number: 98003The Loctite® ZETA® 7415 UV Benchtop Conveyor offers variable speed adjustment for low to mediumvolume production and is designed for use with an electrodeless bulb and a parabolic reflector to createa uniform cure area. The lamp assembly, conveyor, and power supply are ordered separately. The systemcan be integrated into an automatic or semi-automatic production line for cure-on- demand assembly.Features:• Conveyor speeds from 3.3 to 23 feetper minute or 0.3 to 7.2 feet per minute• Typical curing area width of 6 inches• Lamp orientation and height areadjustable for variable cure focal points• Integrated modular blowerfor lamp coolingTheory of OperationAn operator will assemble the desired partswith a light curing adhesive or sealant,place the assembly on the conveyor with apreset belt speed and lamp height, and allowthe assembly to pass through the conveyor to theother side, where the assembly should be removed.TECHNICAL SPECIFICATIONSConveyor Utilities117 VAC single phase, 1 amp, 50 to 60 Hz or canbe configured for 230 VAC single phase98004* PowerSupply Utilities208 VAC single phase; 18 amps; 50/60 Hz98005* PowerSupply Utilities240 VAC single phase; 18 amps; 50/60 HzMaximum Part Size7.5" W x 3" HConveyor Size27.4" H x 42" W x 20" DConveyor Weight85 lbs.Power Supply Size8" H x 19.9" W x 23" DUseful Cure Area 6" x 6"Optimized SpectralOutput RangeUVA, B, C*Parts Included(1) Loctite ® ZETA ® 7415 UV Benchtop Conveyor*(1) Ultraviolet Protection Glasses (1) ManualAdditional Accessories Sold Separately98086 – Loctite ®ZETA ® 7011-ADosimeter-Radiometer98089 – Loctite ®ZETA ® 7011-VDosimeter-Radiometer983466 – Loctite ® Air Deflection Kit, High Grade Quartz983465 – Loctite ® Sight Shield, Snap In, Tunnel Style983464 – Loctite ® Sight Shield, Snap In, Box End Style983462 – Loctite ® Exhaust Plenum983471 – Loctite ® Fusion V Bulb - 300 W/in.983469 – Loctite ® Fusion D Bulb - 300 W/in.983470 – Loctite ® Fusion H Bulb - 300 W/in.* The lamp assembly is sold separately; see the Light Sources section for more details on pages 117-118.For additional information and the full line of equipment, visit www.equipment.loctite.com.115
Page 1 and 2:
theequipmentsourcebook2007volume 6
Page 3 and 4:
Table of ContentsINTRODUCTIONEQUIPM
Page 6 and 7:
Equipment ServiceSolutionsINTRODUCT
Page 8 and 9:
Dispense SystemsDISPENSINGVOLUMETRI
Page 10 and 11:
DISPENSINGDispense SystemsLOCTITE
Page 12 and 13:
DISPENSINGDispense SystemsLoctite
Page 14 and 15:
DISPENSINGDispense SystemsLOCTITE
Page 16 and 17:
Dispense SystemsDISPENSINGTUBE BOND
Page 18 and 19:
Controllers &ReservoirsDISPENSINGMU
Page 20 and 21:
Controllers &ReservoirsDISPENSINGSI
Page 22 and 23:
Controllers &ReservoirsDISPENSINGRE
Page 24 and 25:
Controllers &ReservoirsDISPENSINGLO
Page 26 and 27:
DISPENSINGBOTTLE DISPENSINGLOCTITE
Page 28 and 29:
Hand HeldApplicatorsDISPENSINGLOCTI
Page 30 and 31:
Hand HeldApplicatorsDISPENSINGLOCTI
Page 32 and 33:
DISPENSINGTwo-Part VolumetricDispen
Page 34 and 35:
DISPENSINGTwo-Part Volumetric Dispe
Page 36 and 37:
Two-Part VolumetricDispensingMeter
Page 38 and 39:
Two-Part VolumetricDispensingMeter
Page 40 and 41:
DISPENSINGLoctite® DuraPump Select
Page 42 and 43:
DISPENSINGLoctite® Brand Meter Mix
Page 44 and 45:
DISPENSINGVariable Ratio Systems fo
Page 46 and 47:
DISPENSINGHand Held HotMelt Applica
Page 48 and 49:
DISPENSINGHand Held HotMelt Applica
Page 50 and 51:
Hand Held HotMelt ApplicatorsDISPEN
Page 52 and 53:
DISPENSINGBulk Hot Melt SystemsBulk
Page 54 and 55:
Bulk Hot MeltSystemsDISPENSINGLOCTI
Page 56 and 57:
Bulk Hot MeltSystemsDISPENSINGLOCTI
Page 58 and 59:
DISPENSINGLoctite® Brand Extrusion
Page 60 and 61:
DISPENSINGHand Held ValvesHand Held
Page 62 and 63:
Hand Held ValvesDISPENSINGGENERAL P
Page 64 and 65:
Hand Held ValvesDISPENSINGPINCH TUB
Page 66 and 67: DISPENSINGValves & PumpsValves & Pu
Page 68 and 69: Valves & PumpsDISPENSINGLOCTITE ®
Page 70 and 71: DISPENSINGValves & PumpsGENERAL DUT
Page 72 and 73: Valves & PumpsDISPENSINGHIGH VISCOS
Page 74 and 75: DISPENSINGValves & PumpsPOSITIVE DI
Page 76 and 77: Valves & Pumps DISPENSINGLoctite®
Page 78 and 79: DISPENSINGPail PumpsLOCTITE ® HIGH
Page 80: DISPENSINGMonitoring SystemsMonitor
Page 83 and 84: Tapered Dispense Tips1 1 ⁄4" POLY
Page 85 and 86: Loctite® Brand Syringe Accessories
Page 87 and 88: AccessoryPARENT PRODUCTItem Numbers
Page 89 and 90: LOCTITE ® 200 BENCHTOP ROBOT STATI
Page 91 and 92: LOCTITE ® 400 BENCHTOP ROBOT STATI
Page 93 and 94: LOCTITEHeading ® S440 SERIES SCARA
Page 95 and 96: MOTIONCONTROLLOCTITE ® ADVANCING S
Page 97 and 98: Loctite® Brand Mounting Hardware,W
Page 99 and 100: O-Ring FabricationO-RINGFABRICATION
Page 101 and 102: LIGHT CURE SolutionsPRODUCTItemNumb
Page 103 and 104: LOCTITE ® 7700-HD LED LIGHT SOURCE
Page 105 and 106: Wand SystemsLoctite® ZETA® light
Page 107 and 108: LOCTITE ® ZETA ® 7735 UV WAND SYS
Page 109 and 110: LOCTITE ® ZETA ® 7760 UV WAND SYS
Page 111 and 112: LOCTITE ® ZETA ® 7401 UV CHAMBERI
Page 113 and 114: LIGHT CURE Cure Chambers &Flood Sys
Page 115: Light MetersDecreased radiant power
Page 119 and 120: Light SourcesOur light sources and
Page 121 and 122: Index119INDEXFor additional informa
Page 123 and 124: 121INDEXFor additional information
Page 125 and 126: 123INDEXFor additional information
Page 127: 125INDEXFor additional information
show all

equipment sourcebook - Loctite.ph

Create successful ePaper yourself

Delete template?

Save as template?