equipment sourcebook - Loctite.ph

Loctite ® Posi-Link Dispense Systemfor Prepackaged SyringestheDISPENSINGThe Loctite® Posi-Link Dispensing System is a programmable, volumetric dispensesystem that is designed to provide the highest level of dispensing precision directlyfrom a disposable syringe barrel. No need to worry about product temperature orproduct viscosity changes. This innovative, patent pending design utilizes a“positive link” between a step motor and a mechanical plunger via a noncompressiblehydraulic fluid, to ensure precise adhesive dispensing down to0.001 ml drop sizes. See Theory of Operation, page 10.COMPLETE LOCTITE ® POSI-LINK SYRINGE SYSTEMAGEof Volumetric ControlThe END of wettedcomponents and adhesivedownloadingDispense SystemsLoctite ® Posi-Link Syringe SystemController + Actuator + NestLOCTITE ® POSI-LINK CONTROLLERItem Number: 98377Provides all operator interface andcontrol signals to actuator.Features:(Each Item Sold Separately)• Dose selection by volume• Easy programming controller, withstorage capacity for 25 user definedprograms, reduces adhesive set-up waste• Smallest footprint on the market to conserve benchtop space• Automatic syringe engagement to ensureeasy and error-free syringe changeover• Adhesive level monitoring with low level visual and digital outputs• Fault detection with visual and digital outputs for clogged nozzles,loss of pressure, and system faults• In- cycle visual and digital outputs• Foot switch, finger switch or PLC remote start activationLOCTITE ® POSI-LINK ACTUATORSItem Numbers: See chartProvides adhesive dispensing by effecting incrementalmovements of syringe piston and displacing programmablequantities of adhesive within syringe barrel.Features:• Flexible orientation in any position• Easily fits below an industrial workbench or wall mountswith brackets supplied to conserve benchtop space• Lightweight remote dispense head has a “positive link” toactuator via a 7 foot tether, allowing ergonomic hand helddispensing or mounting directly on robotic arms• Easily attaches to syringe nest (sold separately)to accommodate alternate syringe barrel sizes• Adhesive Pressure: Mechanically driven vs. traditionalair pressure driven, eliminating risk of air infiltrationinto adhesive• Suck-Back: Prevents drip at end of dispense, and is mechanicaldriven vs. traditional air vacuum driven, eliminating risk ofadhesive being sucked into the systemCompact controller and floor mounted actuatorleaves benchtop wide open for manual applications.See pages 30-31 for more information onLoctite ® Posi-Link for dual cartridge applications.PRODUCTLoctite ®Posi-Link 5-25 ActuatorLoctite ®Posi-Link 10-50 ActuatorItem Number 98378 98379 ‡ApplicationTypeSyringeBarrel SizeRecommendedfor Hand HeldRecommendedfor Mountedor Robotic5, 10, 25 ml 10, 25 ml‡ See pages 30-31 for use with dual componentepoxy cartridges.For additional information and the full line of equipment, visit www.equipment.loctite.com.9