equipment sourcebook - Loctite.ph

DISPENSINGDispense SystemsLOCTITE ® SHOT MISER DISPENSE SYSTEMCombination of Item Numbers: 98079, 98085 and 98090The Loctite® Shot Miser Dispense System is designed for both manual and timed dispensing of all single component productswith viscosities ranging from 0 to 80,000 cP. All wetted components are inexpensive and disposable, resulting in low maintenancecosts and minimal downtime. The complete system requires the purchase of three separate components; a reservoir, controller, anddispense valve. The reservoir will directly accept 250 ml and 1 pound product bottles (but not 1 liter containers). The operatingmanual and all controls are in both English and Spanish.LOCTITE ® SHOT MISER VALVE CONTROLLER Item Number: 98079 (see page 18)Features:• Electro-pneumatic timer/controller for dispense valvethat directly interfaces with any Loctite® brandautomatic dispense valve (excluding item 97116)• Multiple range, adjustable timer (0.1 sec to 99 minutes)• Foot switch actuatedLOCTITE ® SHOT MISER DISPENSE VALVE Item Number: 98085 (see page 71)Features:• Pneumatically actuated pinch-tubedispense valve capable of dispensing dropsand beads• Disposable fluid path for fast, easy,and low cost maintenance• 1 ⁄4" diameter product feed tube• Adjustable valve stroke for enhancedshot size controlLOCTITE ® SHOT MISER 1 LITER RESERVOIRItem Number: 98090 (see page 22)Features:Theory of Operation• 1 liter internal capacity reservoir, directlyaccepts all Loctite® brand productbottles in 250 ml and 1 pound bottlepackage sizes• Adjustable pressure regulator, 0 to 100 psi• Easy-to -read pressure gauge(units in psi and bar)• A pressure/vent valve and hand-tightlid knobs allow for easy, no-tool bottlechangeover• Tank fitting accommodates 1 ⁄4" diameterproduct feed tubeThe container of adhesive is placed in the product reservoirand the system is pressurized using a pneumatic air source.The controller’s analog adjustable timer controls the openingand closing of the dispensing valve. The dispense cycle isinitiated by the pneumatic foot pedal. The amount ofdispensed adhesive is controlled by adjustment of air pressure,valve open time, and the size of the dispensing needle.Pneumatic SupplyElectrical PowerFluid PressureProduct ViscosityController(98079)DispenseValve (98085)Reservoir(98090)Used to DispensePackage Types & SizesParts IncludedAdditional InformationDimensionsWeightDimensionsWeightDimensions(Overall)Internal ReservoirWeightTECHNICAL SPECIFICATIONS60 to 100 psi minimum120 VAC; 50/60 Hz100 psi maximum0 to 80,000 cP3.875" H x 6.0" W x 5.5625" Depth3.5 lbs.6.375" H x 5.1875" W x 1.75" Depth0.5 lbs.13.3" H x 8.5" Diameter(6.5625" diameter without stand)7" H x 3.75" Diameter8.5 lbs.Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, Threadlockers250 ml bottle / 1 lb. bottle(1) Shot Miser Reservoir with Stand(1) Shot Miser Controller with Foot Switch(1) Shot Miser Dispense Valve with 1 ⁄4" diameterproduct feed tube(1) Dispense Tip Sample Kit(1) Valve Air Line (1) ManualFor Spare Parts and Accessories, see page 84.For Dispense Tips, see pages 80-81.8For additional information and the full line of equipment, visit www.equipment.loctite.com.