equipment sourcebook - Loctite.ph

theequipmentsourcebook2007volume 6

INTRODUCTIONThe Equipment SourcebookSince 1971, Henkel Corporation has designed, built, and integrated high quality equipmentsolutions. From simple hand held devices to fully automated systems, Henkel offers acomplete line of standard off-the- shelf Loctite® brand dispensing and light curingequipment which can easily be integrated into your manufacturing process.From water thin liquids to high viscosity pastes, Loctite® brand equipment is capable of dispensingand curing a wide variety of adhesives, sealants, and other industrial fluids:Adhesives & SealantsIndustrial FluidsAcrylics Hot Melts Accelerators/Activators PaintsAnaerobics Silicones Greases PrimersCyanoacrylates Urethanes Inks SolventsEpoxies UV/Light Curing Adhesives Lubricants/Oils Solder PastesIn addition to our standard line of equipment, Henkel offers a number of resources to support your dispensing needs:• Custom Equipment Systems – We can modify any Loctite® brand standard system or customize a systemto meet your specific assembly needs.• Equipment Rental Program – Evaluate the performance of our equipment before making a capital investment.• Equipment Website – Locate details on Loctite® brand standard and custom equipment; parts and accessories;and equipment services. To learn more about our equipment, or to find the name and phone number ofyour nearest authorized distributor, visit www.equipment.loctite.com.• Adhesives and Sealants Specialists – Henkel Adhesives and Sealants Specialists are available across the continentto personally assist you with new assembly challenges or to help you re-engineer an existing application forimproved performance and cost savings using Loctite® brand products. Contact us at 1-800-LOCTITE (562- 8483)or visit www.loctite.com.The Adhesive Sourcebook 2007,volume 7In addition to our dispensingand curing equipment,Henkel offers a completeline of adhesives, sealants,cleaners, lubricants, pottingcompounds, and coatings.Over 1,400 products in total!To view our on-line catalog, visitwww.loctite.com or to request acopy, send an emailto literature@loctite.com,and reference the AdhesiveSourcebook, LT-3355.Engineering ServicesHenkel now offers complete engineering services for projectsdemanding expertise and support beyond the limits of ourstandard technical services. As a result, our engineers andscientists can quote the following value-added services:• On-site engineering assistance and consultation• Joint product development programs• Contract lab services and testing• Prototype testing and fixture preparation• Custom formulationsFor more information on these and other Henkel EngineeringServices, contact your Henkel Adhesivesand Sealants Specialist at 1-800-LOCTITE (562- 8483).For additional information and the full line of equipment, visit www.equipment.loctite.com.

Table of ContentsINTRODUCTIONEQUIPMENT SERVICE SOLUTIONS . . . . . . . . . . . . . . 3DISPENSINGDISPENSE SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Loctite® Benchtop Peristaltic Dispenser . . . . . . . . . . . . . . . . . . . 6Loctite® Bond-A-Matic® 3000 Dispenser . . . . . . . . . . . . . . . . . . 7Loctite® Shot Miser Dispense System . . . . . . . . . . . . . . . . . . . . 8Loctite® Posi-Link Dispense Systemfor Prepackaged Syringes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Loctite® Precision Syringe Dispensing System . . . . . . . . . . . . . 11Loctite® Digital Syringe Dispensing System . . . . . . . . . . . . . . . 12Loctite® Foot Pedal Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . 12Loctite® Dial-A-Seal® Applicator . . . . . . . . . . . . . . . . . . . . . . . 13Loctite® Pump-A-Bead II Dispenser. . . . . . . . . . . . . . . . . . . . 13Loctite® Light Cure Acrylic Adhesive Dispensing System. . . . . 14CONTROLLERS AND RESERVOIRS . . . . . . . . . . . . . . . . . 15Loctite® Single Channel Automatic Controller. . . . . . . . . . . . . 16Loctite® Spray Valve Controller . . . . . . . . . . . . . . . . . . . . . . . . . 17Loctite® Digital Multi-Functional Controller . . . . . . . . . . . . . . 17Loctite® Digital Dispense Controller . . . . . . . . . . . . . . . . . . . . . 18Loctite® Shot Miser Valve Controller . . . . . . . . . . . . . . . . . . . 18Loctite® Integrated Semi-Automatic Dispenser . . . . . . . . . . . . 19Loctite® Bond-A-Matic® 3000 Reservoir. . . . . . . . . . . . . . . . . . 20Loctite® 300 ml Cartridge Pusher . . . . . . . . . . . . . . . . . . . . . . . 21Loctite® 2.25 Gallon Pressure Reservoir . . . . . . . . . . . . . . . . . . 21Loctite® Shot Miser Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . 22Loctite® 4 Liter Gravity Feed Reservoir . . . . . . . . . . . . . . . . . . . 22HAND HELD APPLICATORS . . . . . . . . . . . . . . . . . . . . . . . . . 23Loctite® 50 ml / 250 ml Hand Pumps. . . . . . . . . . . . . . . . . . . 24Loctite® 1 Liter Collapsible Bottle Holder. . . . . . . . . . . . . . . . 24Loctite® Soft Squeeze Bottles . . . . . . . . . . . . . . . . . . . . . . . . . . 24Loctite® 30 ml Manual Syringe Applicator . . . . . . . . . . . . . . 25Loctite® 10 ml / 30 ml Syringe Manual Plungers . . . . . . . . . 25Loctite® 50 ml Dual Cartridge Manual Applicator. . . . . . . . 25Loctite® 50 ml Dual Cartridge Pneumatic Applicator . . . . . 26Loctite® Caulking Gun Conversion Kitsfor 50 ml Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Loctite® 200 ml / 400 ml Dual CartridgeManual Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Loctite® 200 ml / 400 ml Dual CartridgePneumatic Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Loctite® Universal Metal Dispenser . . . . . . . . . . . . . . . . . . . . 28Loctite® Fixmaster® Rapid Rubber Repair Dispenser . . . . . . 28Loctite® 300 ml Pneumatic Cartridge Dispenser . . . . . . . . . . 29Loctite® Foldable 300 ml Cartridge Applicator . . . . . . . . . . . 29Loctite® 300 ml Pneumatic Cartridge Dispenser Retainer . . 29TWO-PART VOLUMETRIC DISPENSING –DUAL CARTRIDGE SYSTEMS. . . . . . . . . . . . . . . . . . . . . . 30Loctite® Posi-Link Dispense System for Dual Cartridges . . . 30TWO-PART VOLUMETRIC DISPENSING –METER MIX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Loctite® DuraPump Programmable Meter Mix System . . . . 33Loctite® DuraPump Pneumatic Meter Mix System . . . . . . . . 34Loctite® Meter Mix 1000 Dispense System . . . . . . . . . . . . . . . . 35Loctite® Meter Mix 2000 Dispense System . . . . . . . . . . . . . . . . 36Loctite® Meter Mix 3000 Dispense System . . . . . . . . . . . . . . . . 37Loctite® Meter Mix Dispense SystemsAccessory Option Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . 38Loctite® Brand Meter Mix System Options and Accessories . . . 39Loctite® Brand Meter Mix Feed System Options and Accessoriesfor Meter Mix 1000, 2000 and 3000 Dispense Systems . . . . . . 40Loctite® Meter Mix Dispensing SystemsPump Selector Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41HAND HELD HOT MELT APPLICATORS . . . . . . . . . . . . 43Loctite® Hysol 050 / 050-HT / 050A . . . . . . . . . . . . . . . . . . . . 44Loctite® Hysol 050-GAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Loctite® Hysol 050-LITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Loctite® Hysol 075 / 075-LT . . . . . . . . . . . . . . . . . . . . . . . . . . 45Loctite® Hysol 175-AIR / 175-AIR-HTPneumatic Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Loctite® Hysol 175-SPRAY / 175-SPRAY-HTPneumatic Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Loctite® Hysol 175 Manual Applicator . . . . . . . . . . . . . . . . . 47Loctite® Hysol Reactive Urethane Cartridge Dispenser . . . . 47Loctite® Hot Melt Bench Mount Kit . . . . . . . . . . . . . . . . . . . . . 48Loctite® Hot Melt Pneumatic Timer . . . . . . . . . . . . . . . . . . . . . 48Loctite® Hot Melt Nozzles and Accessories . . . . . . . . . . . . . . . . 49BULK HOT MELT SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . 50Loctite® Hysol PUR Hot Melt 5 Gallon Pail Pump . . . . . . . . 51Loctite® Hysol Bulk-12 System . . . . . . . . . . . . . . . . . . . . . . . . 52Loctite® Hysol Bulk-14 System. . . . . . . . . . . . . . . . . . . . . . . . . 53Loctite® Hysol Bulk-34 System . . . . . . . . . . . . . . . . . . . . . . . . 54Loctite® Hysol Bulk Hot Melt System Applicators . . . . . . . . 55Loctite® Hysol Bulk Hot Melt SystemHoses, Controllers, Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Loctite® Bulk Hot Melt System Nozzles and Accessories . . . . . 57HAND HELD VALVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Loctite® LV Hand Held Applicator . . . . . . . . . . . . . . . . . . . . . . 59Loctite® Manual Hand Held Applicator. . . . . . . . . . . . . . . . . . 60Loctite® Pneumatic Hand Held Applicators. . . . . . . . . . . . . . . 61Loctite® Vari-Drop Applicator . . . . . . . . . . . . . . . . . . . . . . . . 62Loctite® Brand Hand Held DispensingValve Fluid Compatibility Chart. . . . . . . . . . . . . . . . . . . . . . . 63INTRODUCTION Table of ContentsFor additional information and the full line of equipment, visit www.equipment.loctite.com.

INTRODUCTIONTable of ContentsVALVES & PUMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Loctite® Stationary Applicator Valve . . . . . . . . . . . . . . . . . . . . 65Loctite® Micro Needle Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Loctite® Light Cure Dispense Valve . . . . . . . . . . . . . . . . . . . . . . 67Loctite® Cyanoacrylate Dispense Valve. . . . . . . . . . . . . . . . . . . 67Loctite® Diaphragm Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Loctite® Spray Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Loctite® Spray Valve Controller. . . . . . . . . . . . . . . . . . . . . . . . . 69Loctite® Poppet Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Loctite® Stainless Steel Poppet Valve . . . . . . . . . . . . . . . . . . . . . 70Loctite® Shot Miser Dispense Valve . . . . . . . . . . . . . . . . . . . . 71Loctite® Positive Displacement Pump . . . . . . . . . . . . . . . . . . . . 72Loctite® Rotospray 9000 Applicator . . . . . . . . . . . . . . . . . . . . . 72Loctite® Brand Valve & Pump Fluid Capability Chart . . . . . . 73PAIL PUMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Loctite® Low Viscosity Fluid Pumps . . . . . . . . . . . . . . . . . . . . . 75Loctite® High Viscosity Paste Pump Systems . . . . . . . . . . . . . . 76Loctite® Pail Pump Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 77MONITORING SYSTEMS. . . . . . . . . . . . . . . . . . . . . . . . . . 78Loctite® Fluorescence Detector . . . . . . . . . . . . . . . . . . . . . . . . . . 78Loctite® In-Line Flow Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . 79Loctite® Fluid Waveform Analyzer, Signature Series. . . . . . . . 79CONSUMABLESDISPENSE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . 80Loctite® Brand Dispense Tips . . . . . . . . . . . . . . . . . . . . . . . . . . 80Loctite® Brand Cartridge Accessories . . . . . . . . . . . . . . . . . . . . 81Loctite® Brand Static Mix Nozzles and Accessories . . . . . . . . 82Loctite® Brand Syringe Accessories . . . . . . . . . . . . . . . . . . . . . . 83Loctite® Brand DispensingSpare Parts and Accessories . . . . . . . . . . . . . . . . . . . . . . 84MOTION CONTROLROBOT DISPENSE SYSTEMS . . . . . . . . . . . . . . . . . . . . . . 86Loctite® 200 Benchtop Robot Station . . . . . . . . . . . . . . . . . . . . 87Loctite® 300 Benchtop Robot Station . . . . . . . . . . . . . . . . . . . . 88Loctite® 400 Benchtop Robot Station . . . . . . . . . . . . . . . . . . . . 89Loctite® 500 Benchtop Robot Station . . . . . . . . . . . . . . . . . . . . 90Loctite® S440 Series SCARA-N Robot . . . . . . . . . . . . . . . . . . . . 91DISPENSE STATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Loctite® Advancing Slide Dispense Station . . . . . . . . . . . . . . . 93Loctite® Single Rotary Dispense Station. . . . . . . . . . . . . . . . . . 94Loctite® Dual Rotary Dispense Station . . . . . . . . . . . . . . . . . . . 94Loctite® Brand Mounting Hardware,Workbenches, and Guarding Enclosures . . . . . . . . . . . . . . . . 95FUME FILTRATION SYSTEMBenchtop Fume Filtration System. . . . . . . . . . . . . . . . . 96O-RING FABRICATIONLoctite® Precision O-Ring Cut and Splice Tool . . . . . 97LIGHT CURELIGHT CURE SOLUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . 98Loctite® 7700 LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . 100Loctite® 7703 LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . 100Loctite® 7700-HD LED Light Source . . . . . . . . . . . . . . . . . . . . 101Loctite® 7703-HD LED Light Source . . . . . . . . . . . . . . . . . . . . 101Loctite® CureJet 405 LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . 102Loctite® CureJet Indigo LED. . . . . . . . . . . . . . . . . . . . . . . . 102WAND SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Loctite® Indigo 7720 Visible Light Wand System . . . . . . . . 104Loctite® ZETA® 7735 UV Wand Systems. . . . . . . . . . . . . . . . . 105Loctite® ZETA® 7740 UV Wand System. . . . . . . . . . . . . . . . . . 106Loctite® ZETA® 7760 UV Wand System. . . . . . . . . . . . . . . . . . 107CURE CHAMBERS & FLOOD SYSTEMS . . . . . . . . . . . . 108Loctite® UVALOC 1000 UV Cure Chamber . . . . . . . . . . . . . . . 108Loctite® ZETA® 7401 UV Chamber . . . . . . . . . . . . . . . . . . . . . 109Loctite® ZETA® 7411-S UV Flood System . . . . . . . . . . . . . . . . . 110Loctite® Indigo 7418 Visible Light Flood System . . . . . . . . . 111Loctite® ZETA® 7420 Visible Light Flood System . . . . . . . . . . 112LIGHT METERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113Loctite® ZETA® 7011-A Dosimeter-Radiometer. . . . . . . . . . . . 113Loctite® ZETA® 7011-V Dosimeter-Radiometer. . . . . . . . . . . . 113Loctite® ZETA® 7021 Spot Radiometer . . . . . . . . . . . . . . . . . . 114CURE CONVEYORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Loctite® ZETA® 7415 UV Benchtop Conveyor. . . . . . . . . . . . . . 115Loctite® ZETA® 7610 UV Benchtop Conveyor. . . . . . . . . . . . . . 116LIGHT SOURCES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117Loctite® Electrodeless Lamp Assembly and Power Supply . . . 117Loctite® High Intensity Ultraviolet Sources. . . . . . . . . . . . . . . 118INDEXItem Number Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . 1192For additional information and the full line of equipment, visit www.equipment.loctite.com.

Equipment ServiceSolutionsINTRODUCTIONEQUIPMENT RENTALMany of the equipment products that Henkel offers areavailable for short term rental. Henkel’s equipment rentalprogram allows customers the flexibility to confirm theperformance of our adhesive and equipment risk-free beforeinvesting in a purchase. If, during the first 30 days, you decidethat you would like to purchase the rental equipment, theentire rental charge is credited toward your purchase.The benefits of this program include:• The performance of a new manufacturing processcan be confirmed before investing fully in the purchaseof equipment• Short production runs can be accommodated withouthaving to buy equipment• Equipment can be rented during the repair ofproduction equipment, minimizing any down timeLEASE-TO-OWN PROGRAMHenkel offers a lease-to-own program for new equipment.According to the United States Equipment Lessors Association,80% of all companies use leasing to acquire some or all of themachinery and equipment they use to run their business.Henkel’s lease-to-own program provides an effective way foryour business to acquire almost any Henkel equipment. Leasescan be customized to each company’s needs. Our program canalso include other services and spare parts as part of theequipment lease. Let us customize a lease program to meetyour needs.PREVENTATIVE MAINTENANCE CONTRACTSThere are many misconceptions about preventativemaintenance. One such misconception is that PM is undulycostly. This may be true for some components, but not all.Without preventative maintenance, costs for lost productiontime from unscheduled equipment breakdown will beincurred. Also, PM will result in savings due to an increase ineffective system service life.Long-term benefits of PM include:• Improved system reliability• Decreased cost of replacement• Decreased downtime• Better spare part inventory managementREQUEST EQUIPMENT SERVICESTo learn more about the services Henkel offers, you can visitour website at www.equipment.loctite.com/service. In addition toour services, the website offers manuals and technicalinformation on Lotite® equipment products.By InternetTo request a quote or get more information, email yourrequest to equipment-customerservice@loctite.com.By TelephoneIf you wish to speak to us regarding an equipment service,you can call 860-571-5174 to speak to an equipment servicesrepresentative.If you have a question regarding equipment set up oroperation, our technical information staff is available to help.To contact them, call 1-800-LOCTITE and choose the technicalservice option.LOCTITE ® EQUIPMENT WEBSITETo better support our wide array of equipment services, ourEquipment web site provides easy access to all service optionsand inquiries for all Loctite® Equipment you may be interestedin. Technical literature, Equipment Showroom locator,operational videos, and much more, are all at your fingertips,for quick and easy access. You can also choose to purchasedirectly on-line using a major credit card. Select from our widearray of adhesive dispensing and light curing equipment.Shipping time for most items are just 1 to 2 business days.Please visit the site at:Henkel can create a PM contract that fits your specificequipment and work with your maintenance staff to insuremaximum up time of your equipment.4For additional information and the full line of equipment, visit www.equipment.loctite.com.

Dispense SystemsLoctite® brand dispense systems, available from Henkel, are designed to offer the total packagefor fluid delivery. Whether you use a Loctite® brand adhesive product, or any other brand, thesecomplete systems are ready for immediate operation and offer the manufacturing flexibilityand reliability you’re looking for. Selection of a Loctite® brand complete dispensing system isbased on the product being used, package size, and process requirements.DISPENSING Dispense SystemsPRODUCTItemNumberDispensePatternsUsed toDispensePackageTypes & SizesViscosityRangeVacuumSuck-BackVOLUMETRIC BOTTLE DISPENSERS – Dispense adhesive directly from product bottle with no reservoirs required.Loctite ® BenchtopPeristaltic Dispenser98548Dots, Drops,BeadsInstant Adhesives,Light Cure/Acrylics,Retaining Compounds,ThreadlockersAny0 to5,000 cPN/ACOMPLETE PRESSURE-TIME BOTTLE DISPENSE SYSTEMS –Equipped with all components needed to dispense a wide range of products in a variety of adhesive bottle sizes.Loctite ® Bond-A-Matic ®3000 Dispenser 0-15 psiLoctite ® Bond-A-Matic ®3000 Dispenser 0-100 psi982719982722Dots, Drops,BeadsGel Adhesives,Instant Adhesives,Light Cure/Acrylics,Retaining Compounds,Threadlockers250 ml bottle1 lb. bottle1 L bottle2 kg bottle200 g squeeze tubeLowMedium toHighN/ALoctite ® Shot Miser Dispense SystemSeepage 8Dots, Drops,BeadsInstant Adhesives,Light Cure/Acrylics,Retaining Compounds,Threadlockers250 ml bottle1 lb. bottleLow toMediumN/ASYRINGE DISPENSING SYSTEMS – Choose the Loctite ® Posi-Link Volumetric Dispense System for the highest level of dispense precision.Loctite ® Posi-Link Dispensing SystemSeepage 9Dots, Drops,BeadsGel Adhesives,Instant Adhesives,Light Cure/Acrylics,EpoxiesPrepackaged5 ml syringe10 ml syringe25 ml syringeLow toPasteYesLoctite ® Precision SyringeDispensing SystemLoctite ® Digital SyringeDispensing SystemLoctite ® FootPedal Dispenser97006*88397698049*98050*Dots, Drops,BeadsDots, Drops,BeadsDots, Drops,BeadsGel Adhesives,Instant Adhesives,Light Cure/AcrylicsGel Adhesives,Instant Adhesives,Light Cure/AcrylicsGel Adhesives,Instant Adhesives,Light Cure/AcrylicsTHREAD SEALANT & ANAEROBIC GASKETING DELIVERY SYSTEMS –Ensure consistent application of high viscosity thread sealants and anaerobic gasketing applications.Loctite ® Dial-A-Seal ®Applicator998400 N/A Pipe Sealants3 ml syringe5 ml syringe10 ml syringe30 ml syringe55 ml syringe50 ml tube250 ml tube1 L bottleLow toPasteLow to PasteLow to PasteMedium toHighYesYes98049: No98050: YesN/ALoctite ® Pump-A-Bead IIDispenser986000 Beads Anaerobic Gasketing 850 ml cartridgesMediumto HighN/ATUBE BONDING – Light Cure Acrylic Delivery System.Loctite ® Light CureAcrylic AdhesiveDispensing System98445Beads onTubing ODLight Cure Acrylics2.0 to 6.0 mmID TubingLowN/A* Syringe Air Line Adapter sold separately. See page 83.For additional information and the full line of equipment, visit www.equipment.loctite.com.5

Dispense SystemsDISPENSINGVOLUMETRIC BOTTLE DISPENSERLOCTITE ® BENCHTOP PERISTALTIC DISPENSERItem Number: 98548The Loctite® Benchtop Peristaltic Dispenser is a reliable and effectivevolumetric dispenser for single-component, low viscosity fluids up to5,000 cP, directly from the product bottle. It is great for applicationsthat require dispensing of fluids where a precise bead or specific flowrate is necessary. This dispenser is electro - mechanically operated anddoes not require the use of an air source.Features:• Air-free dispensing eliminates air in product avoidingpremature product clogging of cyanoacrylates• Instant reverse for vacuum suck-back that shuts offthe flow of liquid and prevents dripping• Adjustable post-delay time for vacuum setting• Simple and convenient load mechanism providesfor easy tube changes• Continuous or timed mode of dispense• Large digital LED display• Includes four (4) different feed line tubing sizes toaccommodate various product viscositiesTheory of OperationThe hand held applicator with extended tubing and matchingnozzle is positioned through an eccentric rotor pump assemblyand then inserted into any product bottle. Rotation speed andtime of the rotor motion is then adjusted to dispense the preciseand repeatable drop or bead. The peristaltic motion of the rotorimparts pressure on the tube and pumps product out of thebottle. The rotor can then be set up to reverse after the dispensecycle to provide suck-back and prevent dripping. Rotor directioncan also be adjusted to accommodate placing either end of thetube in the product bottle. Digital time controls effectivelyprovide a wide range of dispense cycles to meet your specificprocess requirements.Power SupplyPower ConsumptionDispense Time RangeRotor SpeedMaximum Flow RateMinimum Drop SizeDimensionsWeightUsed to DispenseViscosityDispense RangePackage Types & SizesSuck-BackTECHNICAL SPECIFICATIONS110/220 VAC; 50/60 Hz0.3 amps0.01 to 99.9 secondsUp to 120 rpmUp to 6 ml per minute0.001 ml7.2" W x 3.2" H x 6.7" D6.6 lbs.Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, Threadlockers0 to 5,000 cP0.001 ml up to 6 ml/minuteAnyProgrammable by reversing the direction of rotorParts Included (1) Silicone Grease (1) Applicator Assembly (1) ManualFeed Tubing:1.6 mm O.D. x 1.0 m – Clear 2.5 mm O.D. x 1.0 m – Black2.0 mm O.D. x 1.0 m – Clear 3.2 mm O.D. x 1.0 m – BlackApplicator Nozzles: 1.2 mm ID 1.9 mm ID1.5 mm ID 2.4 mm IDAdditional Information For Spare Parts and Accessories see pages 84-85.Additional Accessories Sold Separately98501 – Loctite ® Applicator Holder6For additional information and the full line of equipment, visit www.equipment.loctite.com.

DISPENSING Dispense SystemsCOMPLETE PRESSURE-TIME BOTTLE DISPENSE SYSTEMSLOCTITE ® BOND-A-MATIC ® 3000 DISPENSERItem Numbers: 982719 and 982722The Loctite® Bond-A-Matic® 3000 Reservoir Dispense Systems with applicatorare reliable, low cost pneumatic dispensers for single - component adhesives.The systems arrive ready to dispense, complete with a 2-liter pressure reservoirand a Loctite® Vari-Drop applicator. This item is available with a 0 to 15 psipressure regulator which is well suited for low viscosity (< 3,000 cP) adhesives,and a 0 to 100 psi regulator for higher viscosity (>3,000 cP) adhesives.Features:• Improved dispensing control to eliminate waste,and reduce operator fatigue• PTFE lined, black feed line provides a light and moisture barrierto ensure no- clog dispensing of light sensitive acrylicsand moisture sensitive instant adhesives• Dispensing needle assortment allows you to select the needleto deliver the bead or dot size needed for your application• Easy-to-read pressure gauge• Adjustable pressure regulatorTheory of OperationOperation of this unit is easy. An operator will placea bottle of product directly in the reservoir and tightenthe three handles on the cover. The unit is then pressurizedto the appropriate setting for optimal flow control.The product is dispensed through a hand held Loctite®Vari-Drop Applicator which, when depressed, allowsmaterial to flow. A fully depressed finger switch maximizesflow. By adjusting the flow screw on the finger switch,a consistent flow can be set for repeatable dispensing.TECHNICAL SPECIFICATIONSAir InputClean, dry air not to exceed 125 psig and filteredwith a maximum of 50 micronsAir Output 982719: 0 to 15 psi 982722: 0 to 100 psiProduct Viscosity 982719: 0 to 3,000 cP 982722: >3,000 cPMaximum Distance fromSystem to Dispense Point48 inchesOverall13.125" H x 9.875" W x 14.625" DiameterDimensions InternalReservoir10" H x 5" DiameterWeight18 lbs.Used to DispenseGel Adhesives, Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersPackage Types & Sizes250 ml bottle / 1 lb. bottle / 1 L bottle2 kg bottle / 200 g squeeze tubeParts Included(1) Loctite ® Bond-A-Matic ® Reservoir with 1 ⁄4" tank fitting(1) Loctite ® Vari-Drop Applicator Kit(1) 1 ⁄4" Feed Line and Spring Strain Relief(1) Anti-Bubble Tip & Sleeve (1) Needle Assortment Kit(1) Tube of Silicone Grease (1) ManualAdditional InformationFor Spare Parts and Accessories, see page 84.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately984480 – Reservoir Liner 200022 – Empty 1 lb. HDPE BottleFor additional information and the full line of equipment, visit www.equipment.loctite.com.7

DISPENSINGDispense SystemsLOCTITE ® SHOT MISER DISPENSE SYSTEMCombination of Item Numbers: 98079, 98085 and 98090The Loctite® Shot Miser Dispense System is designed for both manual and timed dispensing of all single component productswith viscosities ranging from 0 to 80,000 cP. All wetted components are inexpensive and disposable, resulting in low maintenancecosts and minimal downtime. The complete system requires the purchase of three separate components; a reservoir, controller, anddispense valve. The reservoir will directly accept 250 ml and 1 pound product bottles (but not 1 liter containers). The operatingmanual and all controls are in both English and Spanish.LOCTITE ® SHOT MISER VALVE CONTROLLER Item Number: 98079 (see page 18)Features:• Electro-pneumatic timer/controller for dispense valvethat directly interfaces with any Loctite® brandautomatic dispense valve (excluding item 97116)• Multiple range, adjustable timer (0.1 sec to 99 minutes)• Foot switch actuatedLOCTITE ® SHOT MISER DISPENSE VALVE Item Number: 98085 (see page 71)Features:• Pneumatically actuated pinch-tubedispense valve capable of dispensing dropsand beads• Disposable fluid path for fast, easy,and low cost maintenance• 1 ⁄4" diameter product feed tube• Adjustable valve stroke for enhancedshot size controlLOCTITE ® SHOT MISER 1 LITER RESERVOIRItem Number: 98090 (see page 22)Features:Theory of Operation• 1 liter internal capacity reservoir, directlyaccepts all Loctite® brand productbottles in 250 ml and 1 pound bottlepackage sizes• Adjustable pressure regulator, 0 to 100 psi• Easy-to -read pressure gauge(units in psi and bar)• A pressure/vent valve and hand-tightlid knobs allow for easy, no-tool bottlechangeover• Tank fitting accommodates 1 ⁄4" diameterproduct feed tubeThe container of adhesive is placed in the product reservoirand the system is pressurized using a pneumatic air source.The controller’s analog adjustable timer controls the openingand closing of the dispensing valve. The dispense cycle isinitiated by the pneumatic foot pedal. The amount ofdispensed adhesive is controlled by adjustment of air pressure,valve open time, and the size of the dispensing needle.Pneumatic SupplyElectrical PowerFluid PressureProduct ViscosityController(98079)DispenseValve (98085)Reservoir(98090)Used to DispensePackage Types & SizesParts IncludedAdditional InformationDimensionsWeightDimensionsWeightDimensions(Overall)Internal ReservoirWeightTECHNICAL SPECIFICATIONS60 to 100 psi minimum120 VAC; 50/60 Hz100 psi maximum0 to 80,000 cP3.875" H x 6.0" W x 5.5625" Depth3.5 lbs.6.375" H x 5.1875" W x 1.75" Depth0.5 lbs.13.3" H x 8.5" Diameter(6.5625" diameter without stand)7" H x 3.75" Diameter8.5 lbs.Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, Threadlockers250 ml bottle / 1 lb. bottle(1) Shot Miser Reservoir with Stand(1) Shot Miser Controller with Foot Switch(1) Shot Miser Dispense Valve with 1 ⁄4" diameterproduct feed tube(1) Dispense Tip Sample Kit(1) Valve Air Line (1) ManualFor Spare Parts and Accessories, see page 84.For Dispense Tips, see pages 80-81.8For additional information and the full line of equipment, visit www.equipment.loctite.com.

Loctite ® Posi-Link Dispense Systemfor Prepackaged SyringestheDISPENSINGThe Loctite® Posi-Link Dispensing System is a programmable, volumetric dispensesystem that is designed to provide the highest level of dispensing precision directlyfrom a disposable syringe barrel. No need to worry about product temperature orproduct viscosity changes. This innovative, patent pending design utilizes a“positive link” between a step motor and a mechanical plunger via a noncompressiblehydraulic fluid, to ensure precise adhesive dispensing down to0.001 ml drop sizes. See Theory of Operation, page 10.COMPLETE LOCTITE ® POSI-LINK SYRINGE SYSTEMAGEof Volumetric ControlThe END of wettedcomponents and adhesivedownloadingDispense SystemsLoctite ® Posi-Link Syringe SystemController + Actuator + NestLOCTITE ® POSI-LINK CONTROLLERItem Number: 98377Provides all operator interface andcontrol signals to actuator.Features:(Each Item Sold Separately)• Dose selection by volume• Easy programming controller, withstorage capacity for 25 user definedprograms, reduces adhesive set-up waste• Smallest footprint on the market to conserve benchtop space• Automatic syringe engagement to ensureeasy and error-free syringe changeover• Adhesive level monitoring with low level visual and digital outputs• Fault detection with visual and digital outputs for clogged nozzles,loss of pressure, and system faults• In- cycle visual and digital outputs• Foot switch, finger switch or PLC remote start activationLOCTITE ® POSI-LINK ACTUATORSItem Numbers: See chartProvides adhesive dispensing by effecting incrementalmovements of syringe piston and displacing programmablequantities of adhesive within syringe barrel.Features:• Flexible orientation in any position• Easily fits below an industrial workbench or wall mountswith brackets supplied to conserve benchtop space• Lightweight remote dispense head has a “positive link” toactuator via a 7 foot tether, allowing ergonomic hand helddispensing or mounting directly on robotic arms• Easily attaches to syringe nest (sold separately)to accommodate alternate syringe barrel sizes• Adhesive Pressure: Mechanically driven vs. traditionalair pressure driven, eliminating risk of air infiltrationinto adhesive• Suck-Back: Prevents drip at end of dispense, and is mechanicaldriven vs. traditional air vacuum driven, eliminating risk ofadhesive being sucked into the systemCompact controller and floor mounted actuatorleaves benchtop wide open for manual applications.See pages 30-31 for more information onLoctite ® Posi-Link for dual cartridge applications.PRODUCTLoctite ®Posi-Link 5-25 ActuatorLoctite ®Posi-Link 10-50 ActuatorItem Number 98378 98379 ‡ApplicationTypeSyringeBarrel SizeRecommendedfor Hand HeldRecommendedfor Mountedor Robotic5, 10, 25 ml 10, 25 ml‡ See pages 30-31 for use with dual componentepoxy cartridges.For additional information and the full line of equipment, visit www.equipment.loctite.com.9

DISPENSINGDispense SystemsLoctite ® Posi-Link Syringe SystemLOCTITE ® POSI-LINK SYRINGE NESTS Item Numbers: See chartConnects actuator to syringe barrel.Features:• No tool syringe changeover• No contact with adhesive. Disposable syringesare the only component in contact with the adhesive• No adhesive downloading. Directly accepts Loctite®brand pre-filled syringes, plus many other brandsTECHNICAL SPECIFICATIONSAlso available, 98501 –Loctite ® ApplicatorHolder. See page 83.Loctite ® Posi-Link Syringe Nest Selection5 mlSyringe10 mlSyringe25 mlSyringe98643 98644 98645*N/A 98639 98640Used WithLoctite ® Posi-Link 5-25 ActuatorLoctite ® Posi-Link 10-50 Actuator* 98645 can only be used with productviscosity up to 5,000 cP.Use 98379 – actuator and 98640 – nest, for 25 mlsyringes over 5,000 cP. Suitable forhand held applications.PRODUCTLoctite ® Posi-Link Controller Loctite ® Posi-Link 5-25 Actuator Loctite ® Posi-Link 10-50 ActuatorItem Number 98377 98378 98379Power Source 9' communication cable to actuator 100/240 VAC; 47/63 Hz 100/240 VAC; 47/63 HzDimensions 5.375" H x 6" D x 6" W 34" H x 4" D x 5" W 34" H x 4" D x 5" WTotal Weight 2 lbs. 12 lbs. 13 lbs.Dispense Head Weight N/A 0.75 lbs. 1.5 lbs.Air Supply N/A 40 to 100 psi 40 to 100 psiPosi-Link Electro/Hydraulic Tether N/A 7 feet 7 feetMinimum Dispense Volume N/A 0.001 ml 0.001 mlMaximum Dispense Rate N/A 0.4 ml /second 0.4 ml /secondMaximum Cycle Rate N/A 1 cycle per second 1 cycle per secondParts Included(1) Posi-Link Controller(1) Foot Switch(1) Posi-Link Actuator (1) Air Inlet Pressure Regulator/Gauge (1) 110 Power Cord(1) 9' Communication Cable (2) Wall or Table Mounting Bracket (1) Instruction ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.Additional Accessories Sold Separately988896 – Loctite ® Syringe Finger SwitchLoctite® Posi-Link Actuator Functionality DiagramTheory of OperationA disposable syringe is effectively used as a metering piston/cylinder. Because the syringe barrel is of a known and constantdiameter, a given incremental movement of the syringe piston will displace a known volume of adhesive within the syringe barrel.The controller unit is programmable to initiate a dispense cycle at the specific volumetric amount. It controls the electronicsignaling that activates the step motor inside the actuator housing. External air pressure provides constant force on the plungerwithin the dispense head. With the initiation of a dispense cycle, the following 3 events occur simultaneously:1. The step motor rotates a programmed number of revolutions, moving the lead screw,and increasing the hydraulic volume of the stepping cylinder.2. Hydraulic fluid flows from the remote dispense head to the stepping cylinder, releasing the plungerwithin the dispense head to travel downward in a controlled incremental movement.3. As the dispense plunger travels the controlled increment, it displaces (dispenses) a calculated volumeof adhesive from the syringe barrel.AIR PRESSURECONSTANT ONAIR PRESSURECONSTANT ONREMOTEDISPENSEHEADNON-COMPRESSIBLEHYDRAULIC FLUIDENCLOSURESTEPMOTORSTEPMOTORSYRINGE NESTPRE-PACKAGED SETDISPOSABLESYRINGE PISTONDISPOSABLESYRINGE BARREL7 HYDRAULICHOSESTEPPING CYLINDERLEAD SCREWMOTOR[OFF]MOTOR[ON]ADHESIVENO FLOWFLOWDISPOSABLENEEDLEThe RED represents the fluid path.10

DISPENSING Dispense SystemsSYRINGE DISPENSING SYSTEMSLOCTITE ® PRECISION SYRINGE DISPENSING SYSTEMItem Number: 97006The Loctite® Precision Syringe Dispenser is a pressure-time-vacuum unit designedto dispense adhesive products packaged in 3, 5, 10, 30, 55 and 300 ml cartridges.The unit can be operated in the manual or automatic timed dispense mode todispense dots, beads, or to fill syringes.Features:• Precision air pressure regulator for precise application of small dots• Precise digital display of dispense pressure, 0 to 100 psi• Digital timer display, for precise timer settings• Vacuum suck-back feature to preventdripping and stringing• “Stand-up” design, requires minimal bench space• Detects ±10% variation from set pressure andalerts operator if detectedPower SupplyTheory of OperationThis system uses all digital controls to regulate time and airpressure applied to an adhesive or fluid contained within anysyringe barrel. When the dispense cycle is initiated, a pulse ofair, either timed or manually controlled, is transmitted to thetop of the syringe barrel via an air line adapter (required andsold separately). The amount of product dispensed is controlledby the amount of pressure applied to the product, the length ofthe dispense cycle, the size of the dispense needle, productviscosity, and temperature.Air SupplyPressure RegulatorProduct ViscosityDispense Time RangeDimensionsWeightUsed to DispensePackage Types & SizesParts IncludedAir Line Adapters(Required for syringedispensing, see page 83.)Additional InformationTECHNICAL SPECIFICATIONSSelectable 90/260 VAC; 47/63 HzMinimum - 30 psi0 to 100 psiLow to Paste0.01 to 99.9 minutes5.9" W x 9.0" H x 10.4" D6.17 lbs.Gel Adhesives, Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, Threadlockers3 ml / 5 ml / 10 ml / 30 ml / 55 ml syringes(1) Digital Syringe Controller (1) Foot Switch(1) Power Cord (1) ManualFor 3 ml syringe dispensing: order 98656For 5 ml syringe dispensing: order 98657For 10 ml syringe dispensing: order 97208 or 97216For 30 ml syringe dispensing: order 97244 or 97294For 55 ml syringe dispensing: order 97245 or 98416For Syringe Accessories, see page 83.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately for 97006 and 88397698501 – Loctite ®Applicator Holder988896 – Loctite ® Syringe FingerSwitch Assembly. Used in place of thefoot switch to allow finger actuationwhile holding the syringe barrel.984625 – Loctite ®Vertical Syringe Stand11

DISPENSINGDispense SystemsLOCTITE ® DIGITAL SYRINGE DISPENSING SYSTEM Item Number: 883976The Loctite® Digital Syringe Dispenser is a semi-automatic dispensing system designed to dispenseadhesives and fluids packaged in 3, 5, 10, 30, and 55 syringes and 300 ml cartridges. The unit hasdigital timing control with decimal settings to 0.001 seconds for increased precision over typicalpressure-time systems. An adjustable pressure regulator controls a pulse of air, and when used inconjunctions with an air line adapter attached to an adhesive syringe barrel, will provide acontrolled dispensed amount of adhesive. The system can be operated in the manual, incremental,or timed (automatic) dispense mode to dispense dots, beads or to fill syringes.Features:• Vacuum suck-back can effectively control productdripping or stringing• Manual, Incremental, and Timed modes allowa choice of adhesive dispensing methods• Convenient “teach mode” to set time requiredfor desired dispense amount or volume• Cycle counter is clearly displayed in the LCD screen• The unit can be integrated into customer’s PLCprogramming to initiate a dispense cycle• Units can be stacked securely to save workspaceTheory of OperationThe system is a pressure-time-vacuum dispense system. Itconsists of an air regulator and pressure gauge to controlpressure, and an electrical timing circuit to control the dispensecycle. When the dispense cycle is initiated, a pulse of air, eithertimed or manually controlled, is transmitted to the top of thesyringe barrel via an air line adapter. The amount of productdispensed is controlled by the amount of pressure applied to theproduct, the length of the dispense cycle, the size of thedispense needle, product viscosity, and temperature.Power SupplyAir SupplyPressure RegulatorProduct ViscosityDispense Time RangeDimensionsWeightUsed to DispensePackage Types & SizesParts IncludedAdditional AirLine Adapters(Available for syringedispensing, see page 83.)TECHNICAL SPECIFICATIONSUniversal Power Supply 110/230 VAC; 50/60 Hz35 to 100 psi, 1 ⁄4" FNPT0 to 100 psiLow to Paste0.020 to 99.999 seconds6.0" W x 7.1875" H x 7.6875" D2.6 lbs.G, IA, LCD, RC, TL3 ml, 5 ml, 10 ml, 30 ml and 55 ml syringes / 300 ml cartridges(1) Digital Syringe Dispenser with Universal Power Cord(1) Foot Switch with Cord Lock (1) Manual(1) 10 ml & (1) 30 ml Syringe Adapter (1) Syringe Stand(1) 6 mm OD air line x 6 ft. (4) Air supply fittings(1) Air Line Support Mast (1) Needle Sample KitFor 3 ml syringe dispensing: order 98656For 5 ml syringe dispensing: order 98657For 10 ml syringe dispensing: order 97208 or 97216For 30 ml syringe dispensing: order 97244 or 97294For 55 ml syringe dispensing: order 97245 or 98416Additional Information For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately (see item 97006 – page 11.)988896 – Loctite ® Syringe Finger Switch Assembly. Used in place of thefoot switch to allow finger actuation while holding the syringe barrel.LOCTITE ® FOOT PEDAL DISPENSER Item Numbers: 98049 and 98050The Loctite® Foot Pedal Dispenser is a manually controlled, pneumatic dispenser for use with 3, 5, 10, 30 and 55 syringes,and 300 ml cartridges. It is designed as a floor unit to eliminate the need for bench space. The unit is capable of dispensing dots,drops or beads of fluids ranging from medium viscosity liquidsto high viscosity pastes. The dispense cycle is controlledby a manual foot pedal and an adjustable pressure regulator.TECHNICAL SPECIFICATIONSItem 98050 includes a suck-back feature to prevent drippingAir Input60 to 100 psiwhen dispensing low viscosity fluids.Air Output20 to 100 psiFeatures:• Simple hands-free operation• Adjustable pressure regulator, 20 to 100 psi• Easy-to-read pressure gauge• Available vacuum suck-back,1 to 15 in. Hg, toprevent dripping• Designed as floor unit toeliminate the need forbench spaceTheory of OperationWhen the foot pedal is actuated, a pulse of air is transmittedthrough an air line adapter (sold separately) to the top of thesyringe barrel, pushing a controlled amount of material out ofthe dispense tip. The amount of product dispensed is controlledby the amount of air pressure applied to the product, the lengthof time the foot switch is depressed, the size of the dispense tip,the product viscosity, and the temperature.Product ViscosityLow to PasteVacuum Suck-Back 98049: No 98050: 1 to 15 in. Hg vacuumDimensions98049: 8.0" W x 4.675" H x 4.375" D98050: 8.0" W x 4.675" H x 5.0" DWeight 98049: 3.7 lbs. 98050: 4.1 lbs.Used to DispenseGel Adhesives, Instant Adhesives, Light Cure/AcrylicsPackage Types & Sizes 3 ml, 5 ml, 10 ml, 30 ml and 55 ml syringes / 300 ml cartridgesParts Included(1) Foot Pedal Dispenser (Air Line Adapter sold separately)(1) ManualAir Line Adapters(Required for syringedispensing, see page 83.)Additional InformationFor 3 ml syringe dispensing: order 98656For 5 ml syringe dispensing: order 98657For 10 ml syringe dispensing: order 97208 or 97216For 30 ml syringe dispensing: order 97244 or 97294For 55 ml syringe dispensing: order 97245 or 98416For Syringe Accessories, see page 83.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately98501 –Loctite ® ApplicatorHolder984625 –Loctite ® VerticalSyringe StandDispense KeyG = Gel Adhesives IA = Instant Adhesives LCD = Light Cure/Acrylics RC = Retaining Compounds TL = Threadlockers12For additional information and the full line of equipment, visit www.equipment.loctite.com.

THREAD SEALANT & ANAEROBIC GASKETING DELIVERY SYSTEMSLOCTITE ® DIAL-A-SEAL ® APPLICATORItem Number: 998400The Loctite® Dial- A - Seal® Applicator is a touch actuated, all-pneumatic applicatorfor dispensing high viscosity Loctite® product onto threaded pipe fittings andnipples. The system has a quick turn turret that is equipped with cavities for1 ⁄16, 1 ⁄8, 1 ⁄4, 3 ⁄8, 1 ⁄ 2, 3 ⁄4 and 1 inch male pipe threads. The unit accepts 50 ml or250 ml tubes or 1 liter wide mouth bottles. The product dispense quantity canbe adjusted with a rear adjustment knob. The upper limit per dispense cycle is0.7 ml. It is recommended specifically for applying Loctite® PST® Thread Sealants,Loctite® Vibra-Seal®, and Loctite® Anti-Seize products.Features:• Applicator is fed directly from a 50 ml tube,250 ml tube, or one liter bottle• A quick turn turret is equipped with cavities for1 ⁄16, 1 ⁄8, 1 ⁄4, 3 ⁄8, 1 ⁄2, 3 ⁄4 and 1" male pipe threads• Up to 0.7 ml of product can be dispensed per shot• Adjustable dispense volume• Suggested settings for each diameter fittingare pre-printed on unitTheory of OperationA turret head with a cavity for each size of pipe thread isattached to the output of an air actuated, positive displacementpump. The operator presses a fitting down into the correctcavity. The downward motion of the turret depresses a switchthat actuates the pump. A metered amount of material isdispensed on the part.Air InputProduct ViscosityTurret SizesDimensionsUsed to DispensePackage Types & SizesTECHNICAL SPECIFICATIONSRequires filtered (40 micron) lubricated air, 60 psi min.Medium to High1 ⁄16, 1 ⁄8, 1 ⁄4, 3 ⁄8, 1 ⁄2, 3 ⁄4 and 1" (NPT)7.5" W x 12.2" L(Height with 50 ml tube = 14.4" / Height with 1 L bottle = 16.7")Loctite ® 565 PST ® , 567 PST ® and Vibra-Seal ®Thread Sealants, and Loctite ® brand Anti-Seize products50 ml tube / 250 ml tube / 1 L bottleParts Included (1) Loctite ® Dial-A-Seal ® Applicator (2) Elbow Fittings(1) Stand for 1 Liter Bottle (1) Tube Vent(1) 1 Liter Bottle and Cap (1) Feed Tube(1) 50 ml Tube Adapter (1) Tube Adapter(1) Empty 50 ml Tube with Dispense Cap (1) ManualAdditional Information For Spare Parts and Accessories, see page 84.DISPENSING Dispense SystemsLOCTITE ® PUMP-A-BEAD II DISPENSERItem Number: 986000The Loctite® Pump-A-Bead II is an all-pneumatic dispense systemfor pumping Loctite® anaerobic gasketing materials from 850 mlcartridges. A pneumatically-driven, reciprocating, positivedisplacement piston pump provides for consistent dispensing andensures that air is not introduced into the product. This system iswell suited for stationary or bead dispensing. The Loctite® PoppetValve is also included and is ideal for dispensing continuous beadsat high pressures.Features:• Air piloted control signal initiates dispensing• Air-driven, reciprocating, positive displacement piston pump• Poppet-type dispensing valvecan be mounted onto a robotic arm• Anti-drip feature• Capable of dispensing 0.5 cc per second• Visual signal will indicate “Product Cartridge Empty”• Easily integrated into robotic dispensing stationsTheory of OperationA full cartridge of material is loaded into the system and theunit is switched to operate mode. Upon demand for dispensing,i.e., pneumatic signal, material is fed from the cartridge to anoscillating pump where the pressure is elevated to greater than650 psi. Material is forced through a high-pressure hose to thedispense valve where it is dispensed onto the part.TECHNICAL SPECIFICATIONSAir InputAll-pneumatic system, 60 to 100 psi, filtered to 40 micronsProduct ViscosityMedium to HighCompatible MaterialsLoctite ® brand de-aerated anaerobic gasketingmaterials up to 1,000,000 cP viscosityPumping Rate0.5 cc per secondDimensions16.3" H x 37.2" W x 9.3" DWeight80 lbs.Used to DispenseLoctite ® Gasket Eliminator ® and otherLoctite ® brand Flange SealantsPackage Types & Sizes850 ml cartridgesParts Included(1) Pump-A-Bead II (1) Poppet Valve Applicator(1) ManualAdditional Information For Spare Parts and Accessories, see page 84.For additional information and the full line of equipment, visit www.equipment.loctite.com.13

Dispense SystemsDISPENSINGTUBE BONDINGLOCTITE ® LIGHT CURE ACRYLIC ADHESIVE DISPENSING SYSTEMItem Number: 98445The Loctite® Light Cure Acrylic Adhesive Dispensing System is a dispensing systemthat rapidly and consistently applies a uniform coating of light cure acrylicadhesives to the outer diameter of tubing without adhesive getting into theinternal surface of the tube. The dispenser can accommodate circular tubes from2.0 mm to 6.0 mm in diameter (depending upon bushing size); with a maximumengagement depth of up to 8 mm. Adhesive dispensing onto various diametertubes is accomplished by using specifically sized stainless steel bushings on thedispense orifice. These bushings are easily interchanged on the dispenser. Anelectric motor continuously re-circulates adhesive through the dispensingbushing, thus eliminating waste and insuring adhesive is readily availablewhen tubing is inserted into the dispenser.Adhesive CompatibilityThis unit is designed for use with Light Cure Acrylic Adhesives only.It should not be used with Cyanoacrylates or Light Cure Cyanoacrylates.Features:• Uniform and consistent tube coatingusing simple one hand operation• Bushing design insures no adhesivecontamination of internal tube surface• Easy adhesive adjustment allows operatorto optimize adhesive dispense amount• Optional bushings allow a variety of tube diameters• Versatile system designed to apply adhesive to the outerdiameter of tubing with optional bushings available• Design prevents light exposure of adhesive in the dispenser• Electric pumping mechanism provides constant adhesivesupply and eliminates the need for compressed air• Built-in adhesive level sight glassTheory of OperationThe operator adjusts the adhesive application rate to optimizethe amount of adhesive applied to the assembly. When thetubing is inserted into the bushing, an internal spring retractsand allows the tubing to be inserted. Upon removing tube,a uniform bead, up to 8 mm, is applied with no adhesivegetting onto any internal surface of the tube.TECHNICAL SPECIFICATIONSUtilities110 VAC; 10 amps; 60 HzOverall DispenserDimensions9.0" H x 6.0" Diameter baseOverall TransformerDimensions2.3" H x 3.5" W x 4.2" DWeightDispense Unit – 7.7 lbs. / Transformer – 1.25 lbs. (Not Shown)Adhesive Volume ofDispenser30 mlNOT RECOMMENDED FOR TUBING BELOW 70 SHORE A(1) Light Cure Acrylic Adhesive Dispensing SystemParts Included (1) Transformer (1) Retaining Ring Pliers(1) Manual (1) Power CordLCA Tubing Adhesive Applicator Bushing Selection Guide(Standard Bushing)Item Number Description Tubing OD Range989038 2 mm (0.079 in.) 0.59 in. to 0.088 in.989039 3 mm (0.118 in.) 0.089 in. to 0.128 in.989040 4 mm (0.157 in.) 0.128 in. to 0.167 in.989041 5 mm (0.197 in.) 0.168 in. to 0.207 in.989042 6 mm (0.236 in.) 0.208 in. to 0.246 in.14For additional information and the full line of equipment, visit www.equipment.loctite.com.

Controllers & ReservoirsLoctite® brand controllers and reservoirs can be used as the chief components, along witha selection of Loctite® brand parts and accessories or with your own parts, to create a completecustom dispensing system, designed to meet your specific needs and manufacturing goals.Selection of a Loctite® brand controller and reservoir is based on the adhesive or fluid beingused, the package or container the adhesive or fluid is supplied in, and the overallrequirements of the manufacturing process.DISPENSING Controllers &ReservoirsPRODUCTItemNumberControlledOutputsNumber ofDispense ValvesMULTI-FUNCTION CONTROLLERS – Select when you need more functionality than just single valve dispensing.Loctite ® SingleChannel AutomaticControllerLoctite ® SprayValve ControllerLoctite ® DigitalMulti-FunctionalController97123 2 2 (Dependent)SINGLE FUNCTION CONTROLLERS – Select to operate a single dispense valve.Advancing Slide97118 – 50 mm97119 – 100 mmRotospray9711598521 1 1 N/A N/A1022006 3 3 (Independent) 984691 – 50 mmIn conjunction withPositive DisplacementPump – 983330,see page 72.Loctite ® DigitalDispense Controller97101 1 1 N/A N/ALoctite ® Shot Miser Valve Controller98079 1 1 N/A N/AItem PressurePackage Viscosity Low LevelPRODUCTUsed to DispenseNumber RegulationTypes & Sizes Range SensingINTEGRATED RESERVOIR CONTROLLERS – Space saving and economical, combined controller and reservoir for valve dispensing.97010Gel Adhesives, 250 ml bottleLow to NoLoctite ® Integrated0 to 15 psi97020 Instant Adhesives, 1 lb. bottleMedium YesSemi-AutomaticLight Cure/Acrylics, 1 L bottle97007DispenserRetaining Compounds, 2 kg bottleMedium No0 to 100 psi97017 Threadlockers 200 g squeeze tube to High YesRESERVOIRS – Select your reservoir based on product viscosity and need for low level sensing.982720Yes0 to 15 psi Gel Adhesives, 250 ml bottle Low to982721 YesLoctite ®Instant Adhesives, 1 lb. bottleMedium982726 NoBond-A-Matic ®Light Cure/Acrylics, 1 L bottle3000 Reservoir982723Retaining Compounds, 2 kg bottleYesMedium982724 0 to 100 psi Threadlockers 200 g squeeze tubeYesto High982727 NoLoctite ®300 mlCartridge PusherLoctite ®2.25 GallonPressure ReservoirLoctite ®Shot Miser Reservoir98022 0 to 50 psi98359 0 to 60 psi98090 0 to 100 psiGel Adhesives,Anaerobic Gasketing,Light Cure/Acrylics,Low Viscosity SiliconesGel Adhesives,Instant Adhesives,Light Cure/Acrylics,Retaining Compounds,ThreadlockersInstant Adhesives,Light Cure/Acrylics,Retaining Compounds,Threadlockers300 ml cartridge250 ml tube250 ml bottle1 lb. bottle1 L bottle2 kg bottle200 g squeeze tube250 ml bottle1 lb. bottle200 g squeeze tubeMediumLow toMediumLowto HighYesNoNoLoctite ® 4 LiterGravity FeedReservoir982880 N/ARetaining Compounds,ThreadlockersDirect FillLowto MediumYesFor additional information and the full line of equipment, visit www.equipment.loctite.com.15

Controllers &ReservoirsDISPENSINGMULTI-FUNCTION CONTROLLERSLOCTITE ® SINGLE CHANNEL AUTOMATIC CONTROLLERItem Number: 97123The Loctite® Single Channel Automatic Controller is a multi-function system foroperating one or two dispense valves while controlling peripheral equipmentsuch as advancing slides and rotor spray units. Process functions are programmedby the front panel keyboard and aided by a visual display. High precision controlis possible with the fine tuning of both time and pressure variables. Control ofreservoir pressure, advancing slide delay, and rotor spray operation can all beselected or removed from use individually. This system can be used with low levelsensors such as Loctite® Bond-A- Matic® reservoirs or integrated into fullyautomatic production lines using the PLC interface.Features:• Fully programmable, independent controllerwith permanent software set-up• Front mounted keyboard and multilingual display foreasy system programming and dispense valve control• Digital pressure readout for precise electronicpressure regulation and monitoring of reservoirand valve dispensing• Digital time display and control of valve dispensing• Capable of controlling one or two dispense valves withadvancing slide and rotor spray unitTheory of OperationOperator pre -programming determines which devices are tobe used for a particular application. Once a particular set-upis selected, valve pressure, open time and advancing slidetiming can all be adjusted to meet a specific dispensing need.Power SupplyAir InputAir OutputNumber ofDispense ValvesDimensionsWeightParts IncludedAdditionalInformationTECHNICAL SPECIFICATIONS90/260 VAC; 47/63 Hz58 to 116 psi (4 to 8 bar)1 to 100 psi (0.1 to 7 bar)2 (Dependent)9.0" H x 5.7" W x 10.2" Diameter6.5 lbs. (3 kg)(1) Automatic Controller (1) Pneumatic Tubing, 6 mm O.D.(1) Power Cord (1) ManualFor Spare Parts and Accessories, see page 84.For Dispense Tips, see pages 80-81.Additional Accessories Sold SeparatelyBond-A-Matic ® 3000 Reservoirs (982720 or 982723)97118 – Loctite ® Advancing Slide (50 mm Stroke)97119 – Loctite ® Advancing Slide (100 mm Stroke)97211 – Loctite ® In-Line Flow Monitor97115 – Loctite ® Electric Rotor SprayNote: If used with advancing slide, only one dispense valve can be controlled.16For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITE ® SPRAY VALVE CONTROLLERItem Number: 98521The Loctite® Spray Valve Controller provides 2 independent air signals and is designed to work integrally with the Loctite® SprayValve (item 98520), providing the open/close signal and atomizing air supply, see page 69. The digital timing control can beadjusted separately for Pre-Spray, Spray, and Post-Spray time sequences.This timing flexibility allows the unit to be used for any single-actingautomatic control valve or hand held pneumatic valve.This unit can also integrate with an external PLC.Features:• Microprocessor based timed controller• Fully independent valve, open/close andatomization air supply• 3 separate timed sequences – pre-spray,valve on, post- spray/valve off• Timed or manual mode with foot pedal control• All time modes maintained in memorywith AC power disconnectedTheory of OperationProduct flows from a reservoir under air pressure as provided bythe Loctite® Spray Valve Controller. The controller also providesair to open/close the valve and a separate atomizing air source tothe spray valve nozzle assembly. Timing and pressure controls foratomizing air, fluid line pressure, valve stroke adjustment,height from surface, and material viscosity can be adjusted tooptimize required dispense quantity and coverage pattern.Power SourceAir SupplyNumber ofDispense ValvesDimensionsWeightParts Included989268 –0.014 Nozzle Kit989269 –0.028 Nozzle KitTECHNICAL SPECIFICATIONS90/260 VAC; 47/63 HzMinimum 30 psi2.5" H x 12.5" L x 7.6" D5.5 lbs.(1) Controller Unit and Power Cord (1) Foot Pedal(1) 4' Air Supply Line and FilterAdditional Accessories Sold Separately982720 / 982723 –Loctite ®Bond-A-Matic ®Reservoirs withLow Level Sensors984621 – Loctite ® Replacement Foot Switch1982726 / 982727 –Loctite ®Bond-A-Matic ®ReservoirsDISPENSING Controllers &ReservoirsLOCTITE ® DIGITAL MULTI-FUNCTIONAL CONTROLLERItem Number: 1022006The Loctite® Digital Multi-Functional Controller is a versatile, programmablecontroller designed to provide on/off digital timing and interface logic for up tothree independent functions, pneumatic or electric. A typical use for this unitwould be to operate a dispense valve, advancing slide mechanism, and a turntablein a workstation. It is readily compatible with low level sensors from Loctite® brandreservoirs and the Loctite® 300 ml Cartridge Pusher. It has an interface for twohand,anti-tie-down start switches that makes it ideal for workstation applicationsby eliminating the potential for pinch points. It also includes an interface fora part present sensor, a dispense confirmation sensor, and can provide interfacesignals to a host PLC.Features:• Keypad with LCD display to program the on/off times ofmultiple devices in 0.1 second increments• Interface connections for reservoir low level sensors, partpresent sensors, dispense confirmation sensors, slideposition switches, electrical motors, indicator lights, footswitch, anti-tie-down switches, PLC communication, etc.• Emergency Stop button on front face of the enclosure• Fully modular for optimum system configurationTheory of OperationThe Loctite® Digital Multi-Functional Controller, when usedwith a Loctite® Dispense Valve and Reservoir, provides acomplete automated dispense system. The controller providesdigital timing control for any Loctite® brand automatic dispensevalve, advancing slide, turntable, or rotospray system. Dispensetime range is from 0.01 to 59.99 seconds in 0.01 secondincrements for precise and repeatable dispensing.ElectricalAir InputNumber ofDispense ValvesDimensionsWeightParts IncludedTECHNICAL SPECIFICATIONSInput voltage 100/240 VAC; 50/60 Hz 0.6 ampsInternal voltage: 24 VDC60-100 PSI-G, filtered, dry air at 1 CFM (minimum)3 (Independent)11.375" W x 9.125" D x 8.0" H5 lbs.(1) Digital Multi-Functional Controller (1) Foot Switch Assembly(1) 24 VDC Power Supply (1) ManualAdditional Information For Spare Parts and Accessories, see page 84.Additional Accessories Sold Separately984691 – Loctite ® Advancing Slide (2" Stroke)1044248 – Loctite ® 2-Hand Anti-Tie-Down Switch Set8900550 – Loctite ® PLC Interface Cable1044249 – Loctite ® Cable Connector Plug KitFor additional information and the full line of equipment, visit www.equipment.loctite.com.17

Controllers &ReservoirsDISPENSINGSINGLE-FUNCTION CONTROLLERSLOCTITE ® DIGITAL DISPENSE CONTROLLERItem Number: 97101The Loctite® Digital Dispense Controller provides digitally timed dispense control forall Loctite® brand automatic dispense valves. It controls the air supply to a remotereservoir and the pneumatic opening of a dispense valve, both sold separately. It isreadily compatible with low level sensors from Loctite® Bond-A-Matic® Reservoirs andthe Loctite® 300 ml Cartridge Pusher. This unit is fully modular and can integratewith an external PLC.Features:• Convenient touch pad for dispense time control• Pneumatic output provides air pressure to a fluid pressure reservoir• Fluid low level indicator and output to allowprotocol with plant PLC• Fully modular for use with the Loctite® Bond-A-Matic®Reservoir or the Loctite® 300 ml Cartridge Pusher andElectrical Utilitiesany dispensing valveAir InputTheory of OperationThe Loctite® Digital Dispense Controller, when used with aLoctite® Dispense Valve and Reservoir, provides a completepressure-time or positive displacement dispensing system,depending on the type of reservoir used. This unit is ideal formanufacturing workstations.Number ofDispense ValvesDimensionsWeightParts IncludedTECHNICAL SPECIFICATIONS90/260 VAC; 47/63 Hz70 to 145 PSIG filtered (10 micron), dry air at 1 CFM (minimum)19.5" H x 6.0" W x 11.0" D4.6 lbs.(1) Digital Dispense Controller (1) Power Cord(1) Foot Switch Assembly (1) Manual(1) Terminating PlugAdditional Information For Spare Parts and Accessories, see pages 84-85.LOCTITE ® SHOT MISER VALVE CONTROLLERItem Number: 98079The Loctite® Shot Miser Valve Controller is an economical choice that providesboth manual and timed dispense valve control for any Loctite® brand automaticdispense valve. It features a multiple range timer that provides adjustment from0.1 seconds to 99 minutes.Features:• Electro-pneumatic timer/controller for dispense valve• Timed and continuous dispense modes• Multiple range, adjustable timer (0.1 seconds to 99 minutes)• Foot switch actuated• Rugged, all-steel enclosure with flat topand bottom for easy stacking• Directly interfaces with any Loctite® brand automaticdispense valve (except item 97116)Input Voltage /CyclesFuseNumber ofDispense ValvesDimensionsWeightParts IncludedTECHNICAL SPECIFICATIONS115 VAC; 50/60 Hz1 amp, 250 VAC, 5 mm x 20 mm, Fast Acting13.875" H x 6.0" W x 5.5625" D3.5 lbs.(1) Shot Miser Valve Controller (1) Power Cord(1) Pneumatic Foot Switch (1) ManualAdditional Information For Spare Parts and Accessories, see page 84.18For additional information and the full line of equipment, visit www.equipment.loctite.com.

DISPENSING Controllers &ReservoirsINTEGRATED RESERVOIR CONTROLLERSLOCTITE ® INTEGRATED SEMI-AUTOMATIC DISPENSERItem Numbers: 97007, 97010, 97017 and 97020The Loctite® Integrated Semi-Automatic Dispense Systems combine a controller andreservoir into a single unit. These popular units provide a less complex and morecost effective dispensing solution when compared to systems with separatereservoirs and controllers. Combined with the digital timing feature, this unit willprovide precise dispensing control with any Loctite® automatic dispense valve orpneumatic hand held applicator, sold separately. The reservoir is large enough toaccept up to 2 kg bottles, and units can be equipped with low level sensing asshown in the chart below.Features:• Equipped with a 0 to 15 psi, or a 0 to 100 psiadjustable pressure regulator• Easy-to-read pressure gauge• Continuous or timed dispense mode from0.01 to 99.9 seconds• Drip funnel for reservoir lid during product changeover• 97017 and 97020 offer low level sensors, and arerecommended when dispensing cyanoacrylate adhesivesTheory of OperationThe unit is connected to an external pneumatic supply, andregulates the adjusted dispensing pressure during theselected dispensing time. A bottle of adhesive is placeddirectly into the integrated reservoir, and the reservoir lid isclamped in place. It is then pressurized using clean, filtereddry air. Air within the reservoir will push down on the liquidin the bottle and force it through the product feed line tothe dispensing valve.TECHNICAL SPECIFICATIONSPower Supply90/260 VAC; 47/63 HzAir InputMinimum 30 psiAir Output97007: 0 to 100 psi 97010: 0 to 15 psi97017: 0 to 100 psi 97020: 0 to 15 psiLow Level Sensing97007: No 97010: No97017: Yes 97020: YesProduct Viscosity > 3,000 cP 0 to 3,000 cPDimensions13.8" H x 14.5" W x 9.2" DReservoir Dimensions4.75" diameter x 9.75" HWeight16.5 lbs. (7.5 kg)Used to DispenseGel Adhesives, Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersPackageTypes & SizesParts IncludedAdditionalInformation250 ml bottle / 1 lb. bottle / 1 L bottle2 kg bottle / 200 g squeeze tube(1) Power Cord (1) Integrated Semi-Automatic Dispenser(1) Manual (1) Foot Switch (3) Drip CupsFor Spare Parts and Accessories, see pages 84-85.For Dispense Tips, see pages 80-81.For additional information and the full line of equipment, visit www.equipment.loctite.com.19

Controllers &ReservoirsDISPENSINGRESERVOIRSLOCTITE ® BOND-A-MATIC ® 3000 RESERVOIRItem Numbers: 982720, 982721, 982723, 982724, 982726 and 982727The Loctite® Bond-A-Matic® 3000 Reservoirs, our most versatile and popular units,can be used in a wide array of dispensing applications. These units are available in2 dispensing pressure ranges for a wide range of product viscosities. The reservoircan also be equipped with low level sensors that send an electronic signal toa Loctite® brand controller (items 97101, 97123 or 1022006), sold separately.Features:• User-friendly design• Can accommodate a variety of Loctite® brand product packages• Available with optional low level sensor• All pneumatic operationTheory of OperationOperation of this unit is easy. An operator will place abottle of product in the reservoir and tighten the threehandles on the cover. The unit is then pressurized to theappropriate setting for optimal flow control. The productis dispensed through an applicator, which when actuated,allows material to flow. Flow rate of the product isdependent on the valve selected, pressure, productviscosity, and needle size.Air OutputTECHNICAL SPECIFICATIONS982720: 0 to 15 psi 982723: 0 to 100 psi982721: 0 to 15 psi 982724: 0 to 100 psi982726: 0 to 15 psi 982727: 0 to 100 psiProduct Viscosity 0 to 3,000 cP > 3,000 cP982720: 24 VDC 982723: 24 VDCLow LevelSensing982721: 110 VAC 982724: 110 VAC982726: N/A 982727: N/ADimensions13.25" H x 9.875" W x 14.125" DInternal Reservoir10" H x 5" DiameterWeight18 lbs. unfilledUsed to DispenseGel Adhesives, Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersPackage Types& Sizes250 ml, 1 lb., 1 L, 2 kg bottles / 200 g squeeze tubeParts Included (1) Bond-A-Matic ® 3000 Reservoir with 1 ⁄4" Tank Fitting(1) 1 ⁄4" Feed Line and Spring Strain Relief(1) Anti-Bubble Tip and Sleeve(1) Squeeze Tube Adapter and Nut/Ferrule (982723 / 982727 only)(1) 3 ⁄8" Tank Fitting and Spring Strain Relief (982723 / 982727 only)(1) Manual (1) Tube of Silicone GreaseAdditionalInformationFor Spare Parts and Accessories, see pages 84-85.Additional Accessories Sold SeparatelyAny Loctite ® Brand Dispensing Valve984480 – Reservoir Liner / 200022 – Empty 1 lb. HDPE Bottle20For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITE ® 300 ML CARTRIDGE PUSHERItem Number: 98022The Loctite® 300 ml Cartridge Pusher is designed for dispensing low to medium viscosity products. The cartridge pushermechanically applies pressure to the cartridge plunger using a pneumatically driven ram, removing the possibility of airentrapment in the cartridge. There is a low level sensor that is compatible with Loctite® brand controllers (items 97101, 97123,or 1022006). An automatic dispense valve will also be required for final application of the product. Controllers and valves aresold separately. Not recommended for high viscosity or paste materials.Features:• Mechanical ram provides product pressure, eliminating risk ofinducing air into product, as is the case with pneumatic dispensers• Equipped with a low level sensor that can be integrated to a PLCor any Loctite® brand digital controller• A grease reservoir is included which continually applies a thin filmof grease to the plunger shaft to maintain free operation of the ram• Integral air pressure regulator/gauge• The cartridge retainer can be removed for easy maintenance• Can be mounted vertically or horizontallyTheory of OperationThe Loctite® 300 ml Cartridge Pusher is a front-loaded,free-standing device that can be coupled with a Loctite® DigitalDispense Controller, Loctite® Digital Multi-Functional Controller,or integrated into an existing work cell. Pressurized air issupplied to the air regulator to control the air pressure thatflows into the ram cylinder. A hand lever, pneumatic, three-wayvalve channels the pressurized air into the pneumatic cylinder.Moving the hand lever toward the cartridge sleeve causes thepiston to move forward, pressing product out of the 300 mlcartridge through a product feed line. Moving the hand leverup toward the air cylinder causes the piston to retract. A reedswitch assembly is located on the air cylinder, equipped withan LED indicator. Once activated, the LED indicator will lightup and the switch will communicate a low level conditionto a Loctite® Digital Dispense Controller or Loctite® DigitalMulti-Functional Controller. The reed switch is activated by apermanent magnet located on the piston within the air cylinder.Air InletAir InputProduct ViscosityDimensionsWeightTECHNICAL SPECIFICATIONS1 ⁄8" female NPT50 psi maximumLow to Medium Gel Adhesives8.375" H x 5.8" W x 25.375" Length10.6 lbs.Used to DispenseGel Adhesives, Anaerobic Gasketing,Light Cure/Acrylics, Low Viscosity SiliconesPackage Types & Sizes250 ml tube / 300 ml cartridgeParts Included (1) 300 ml Cartridge Pusher (1) Fitting Kit (1) ManualAdditional Information For Spare Parts, see pages 84-85.For Cartridge Accessories, see page 81.For Dispense Tips, see pages 80-81.DISPENSING Controllers &ReservoirsLOCTITE ® 2.25 GALLON PRESSURE RESERVOIRItem Number: 98359The Loctite® 2.25 Gallon Pressure Reservoir is our largest stand-alone reservoir designedfor use with Loctite® brand pressure-time dispense systems, sold separately, and willaccommodate up to 2 kg packages. The unit is made of heavy, deep-drawn, one-piece steelconstruction and comes equipped with a pressure regulator, gauge, pressure safety reliefvalve, and product feed line connector.Features:• Rugged construction• 0 to 60 psi regulator• Pressure safety relief valve• 1 ⁄4" NPT air line and 1 ⁄4" product feed line connectorsTECHNICAL SPECIFICATIONSPressure Range / Capacity0 to 60 psi / 2.25 gallonsProduct ViscosityLow to MediumDimensions / Weight18.5" H x 12.7" Diameter / 17 lbs.Internal Reservoir9.5" H x 9.3" DiameterUsed to DispenseGel Adhesives, Instant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersPackage Types & Sizes 250 ml, 1 lb., 1 L, 2 kg bottles / 200 g squeeze tubeParts Included (1) 2.25 Gallon Pressure Reservoir (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For additional information and the full line of equipment, visit www.equipment.loctite.com.21

Controllers &ReservoirsDISPENSINGLOCTITE ® SHOT MISER RESERVOIRItem Number: 98090The Loctite® Shot Miser Reservoir is an economical choice for bottle dispensing operations. It is suitable for a full range of productviscosities, up to 80,000 cP. The reservoir is limited to accept packages no larger than 1 pound product bottles.Features:• 1 liter internal capacity reservoir,directly accepts product bottleslisted in chart• Easy-to-read, 0 to 100 psipressure regulator• Pressure/vent valve andhand-tight knobs for easy,no tool bottle changeover• 1 ⁄4" product feed line connectorLOCTITE ® 4 LITER GRAVITY FEED RESERVOIRItem Number: 982880The Loctite® 4 Liter Gravity Feed Reservoir is used to gravity feed low to medium viscosity products to a dispensing system.This unit is typically used in rotospray systems, but could be used for any gravity feed application. It can feed one to fourLoctite® Positive Displacement Pumps (item 983330),sold separately. Low level sensing options are also available.TECHNICAL SPECIFICATIONSFeatures:• For use with low to medium viscosity productfeeding a dispensing system• Feeds up to four Loctite® Positive Displacement Pumps• “Refill on the Fly” without stopping operation• Low level sensing options forintegration with other controls• Visual level capabilityTheory of OperationThe reservoir is intended to bemounted above the point of use,thus allowing material to flow bygravity to a dispense pump. Materialis poured into the reservoir andreplenished as required withoutstopping the operation.Pressure Range / CapacityProduct ViscosityDimensions / WeightInternal ReservoirTECHNICAL SPECIFICATIONS0 to 100 psi / 1 LiterLow to High13.25" H x 8.5" Diameter / 8.5 lbs.7.0" H x 3.75" DiameterUsed to DispenseInstant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersPackage Types & Sizes 250 ml bottle / 1 lb. bottle / 200 g squeeze tubeParts Included(1) Shot Miser Liter Reservoir (1) 6' Product Supply Tube(1) Anti-Bubbler Adapter & Sleeve (1) Spring Guard (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.Additional Accessories Sold Separately998353 – Reservoir Liner 200022 – Empty 1lb. HDPE BottleLow Level SensorAvailable as an option in 24 VDC or 120 VACSize of ReservoirFour liters maximumProduct ViscosityLow to MediumDimensions7.3" W x 8.7" Depth x 12.75" H (19.625" H with lid up)Internal Reservoir12.0" H x 6.6" DiameterWeight4.5 lbs. unfilledUsed to DispenseRetaining Compounds, ThreadlockersPackage Types & SizesDirect FillParts Included (1) Manual (1) 4 Liter Gravity Feed Reservoir(1) Wall Mounting Bracket (1) Reservoir Casement(1) Sensor Mounting Bracket(1) Parts Kit Containing:(3) Reservoir Plugs (4) Male Elbow Fittings(1) Tube of Loctite ® 565 PST ® Thread SealantAdditional Information For Spare Parts and Accessories, see pages 84-85.Additional Accessories Sold Separately982716 – AC Level Sensor Kit 982732 – DC Level Sensor Kit22For additional information and the full line of equipment, visit www.equipment.loctite.com.

Hand Held ApplicatorsLoctite® brand hand held applicators are ergonomically designed for the hand delivery ofadhesives and fluids directly from their original package. Whether pneumatic or manual,each item is designed for the simple, clean, hand held dispensing of fluids, and to reducewaste and operator contact over other methods. Selection of a Loctite® brand hand heldapplicator is based on product type, package configuration, and process requirements.DISPENSING Hand HeldApplicatorsPRODUCTItemNumbersUsed to DispensePackage Types & SizesViscosityRangeBOTTLE DISPENSING – The most popular hand held bottle top dispensers for Loctite ® brand threadlockers and other adhesive products.Loctite ® 50 ml / 250 mlHand Pumps9841497001Retaining Compounds,Threadlockers50 ml bottle250 ml bottleLow toMediumTypeManualLoctite ® 1 Liter CollapsibleBottle HolderLoctite ® SoftSqueeze Bottles98311Retaining Compounds,Threadlockers98345 All Fluids in 2 fl. oz. packages98346 All Fluids in 4 fl. oz. packages98347 All Fluids in 8 fl. oz. packagesSYRINGE DISPENSING – Simple manual dispensers for low volume syringe applications.Loctite ® 30 ml ManualSyringe ApplicatorLoctite ® 10 / 30 mlSyringe Manual Plungers98026Any fluid in a 30 ml syringeincluding 25 ml syringes1 Litercollapsible bottleN/A98192 Any fluid in a 10 ml syringe 10 ml syringe (3 pack)98193 Any fluid in a 30 ml syringe 30 ml syringe (3 pack)Low toMediumLow toMediumManualManual30 ml syringe Low to High ManualLow to HighTWO-PART DISPENSING – Simple and effective two-part dispensers to meet your lower precision dual cartridge application needs.ManualLoctite ® 50 ml DualCartridge ManualApplicators984721034026Two-Component Epoxies,Urethanes, Methacrylates50 ml dual cartridge Low to High ManualLoctite ® 50 ml Dual CartridgePneumatic ApplicatorLoctite ® Caulking GunConversion Kitsfor 50 ml CartridgesLoctite ® 200 ml / 400 mlDual CartridgeManual ApplicatorsLoctite ® 200 ml / 400 mlDual Cartridge PneumaticApplicatorsLoctite ® Universal MetalDispenser for 200 ml /400 ml CartridgesLoctite ® Fixmaster ® RapidRubber Repair Dispenser970429846698415Two-Component Epoxies,Urethanes, MethacrylatesTwo-Component Epoxies,Urethanes, Methacrylates983436983438Two-Component Epoxies,Urethanes, Methacrylates200 ml dual cartridge400 ml dual cartridge985246 400 ml dual cartridge983437200 ml dual cartridge983439Two-Component Epoxies,Urethanes, Methacrylates400 ml dual cartridge985249 400 ml dual cartridge98524539635Two-Component Epoxies,Urethanes, MethacrylatesLoctite ® Fixmaster ® RapidRubber Repair UrethanesCARTRIDGE DISPENSING – Manual and pneumatic applications for 300 ml cartridges.Loctite ® 300 ml PneumaticCartridge DispenserLoctite ® Foldable 300 mlCartridge ApplicatorLoctite ® 300 mlPneumatic CartridgeDispensing Retainer970029850098319AGel Cyanoacrylates, AnaerobicGasketing, Light Cure/Acrylics,SiliconesGel Cyanoacrylates, AnaerobicGasketing, Light Cure/Acrylics,SiliconesGel Cyanoacrylates,Anaerobic Gasketing,Light Cure/Acrylics, Silicones50 ml dual cartridge Low to High Pneumatic50 ml dual cartridge Low to High Manual200 ml and 400 mldual cartridges400 ml Loctite ®Fixmaster ® Rapid RubberRepair dual cartridge300 ml cartridges250 ml tubes300 ml cartridges300 ml cartridgesHigh toPasteHigh toPasteHigh toPasteMedium toHighMedium toHighMedium toHighLow toMediumManualPneumaticManualManualPneumaticManualPneumaticFor additional information and the full line of equipment, visit www.equipment.loctite.com.23

DISPENSINGBOTTLE DISPENSINGLOCTITE ® 50 ML / 250 ML HAND PUMPSItem Numbers: 97001 and 98414Hand HeldApplicatorsThe Loctite® 50 ml and 250 ml Bottle Hand Pumps are portable, precision,bottle-top applicators that thread directly on any 50 or 250 ml bottle ofanaerobic product. Item 98414 is also supplied with a stand to betterbalance the smaller 50 ml bottle. They are designed to dispense at anyangle from 0.01 to 0.04 ml without leaks or product waste. Not suitablefor cyanoacrylate adhesives, primers, or activators.Features:• Adjustable positive displacement,0.01 ml to 0.04 ml of product• Allows user to control amountand positioning of the adhesive• Converts product package into a portable dispenser• Applicator nozzle accepts a variety of dispensing needles• Bottle stand greatly improves 50 ml bottle stabilityTheory of OperationEach squeeze of the trigger will dispense single shots ofLoctite® brand threadlockers and retaining compounds from0.01 to 0.40 ml, with viscosities up to 30,000 cP. This unitrequires no flushing, electricity, or air source.CompatibilityProduct ViscosityDimensions (97001)Dimensions (98414)Used to DispenseTECHNICAL SPECIFICATIONSParts Included 98414:(1) 50 ml Hand Pump and Stand(1) Needle Kit (1) Manual(1) 988506 – Hand PumpWashers (3 pack)AdditionalInformationLoctite ® brand 50 ml or 250 ml anaerobic product bottlesLow to Medium4" H x 5.75" W x 1.5" Diameter- Pump4" H x 5.75" W x 1.5" Diameter- Pump4.5" H x 3.75" W x 2.25" Diameter- StandLow Viscosity Thread Sealants,Retaining Compounds and Threadlockers97001:(1) 250 ml Hand Pump(1) Needle Kit (1) Manual(1) 988506 – Hand PumpWashers (3 pack)For Dispense Tips, see pages 80-81.For Spare Parts and Accessories, see pages 84-85.LOCTITE ® 1 LITER COLLAPSIBLE BOTTLE HOLDERItem Number: 98311The Loctite® 1 Liter Collapsible Bottle Holder is a lightweight holderdesigned to facilitate the transfer of anaerobics from our 1 litercollapsible containers. Its nickel plated steel construction is ruggedand durable. It resists corroding from moisture and adhesive buildup,allowing repeated use.TECHNICAL SPECIFICATIONSDimensionsWeightUsed to DispenseParts Included6.0" H x 5.3" W x 7.1" D0.25 lbs.All approved 1 liter collapsible bottles(1) 1 Liter Collapsible Bottle HolderLOCTITE ® SOFT SQUEEZE BOTTLESLoctite® Soft Squeeze Dispense Bottles are intended for use bycustomers who wish to download Loctite® brand cyanoacrylateadhesives from large containers to smaller, hand held packages.These soft, thin walled polyethylene bottles are ideal for use atmanual workstations. A variety of bottle sizes and cap styles areavailable. Bottles, caps,and dispense tips are sold separately.5.5"PRODUCT Item Number Description9834598346983472 oz. Soft Squeeze Bottle(50 pack)4 oz. Soft Squeeze Bottle(50 pack)8 oz. Soft Squeeze Bottle(50 pack)Product ViscosityDimensionsTECHNICAL SPECIFICATIONSLow to Medium98345: 3.3" H x 1.5" Diameter98346: 4.3" H x 1.9" Diameter983489834998350Dunce Cap with red sealercap for 2 oz. bottle (50 pack)Dunce Cap with red sealer cap for4 oz. and 8 oz. bottles (50 pack)Luer-Slip Cap for 2 oz. bottle(50 pack)Used to Dispense98347: 5.4" H x 2.4" DiameterCyanoacrylate Adhesives98351Luer-Slip Cap for 4 oz. and8 oz. bottles (50 pack)24For additional information and the full line of equipment, visit www.equipment.loctite.com.

SYRINGE DISPENSINGLOCTITE ® 30 ML MANUAL SYRINGE APPLICATORItem Number: 98026The Loctite® 30 ml Manual Syringe Dispenser is a hand held,manually-operated dispenser for any product packaged in astandard 30 ml syringe. This dispenser provides a convenient,cost-effective method to apply product.Features:• Pistol configuration for ease of application• Full-hand trigger minimizes operator fatigue• Easy syringe loading• Smooth dispensingTECHNICAL SPECIFICATIONSUsed to Dispense Any fluid in a 30 ml syringe including 25 ml net fill syringesPackage Types & Sizes30 ml syringesViscosity RangeLow to HighParts Included (1) 30 ml manual syringe applicator (1) Manual (1) PlungerAdditional Information For Dispense Tips, see pages 80-81.DISPENSINGHand HeldApplicatorsLOCTITE ® 10 ML / 30 ML SYRINGE MANUAL PLUNGERSItem Numbers: 98192 and 98193The Loctite® 10 ml Manual Plunger (item 98192) is a plasticplunger for use with 10 ml syringes (2 pack). The Loctite®30 ml Manual Plunger (item 98193) is a plastic plunger for usewith 30 ml syringes (3 pack).Theory of OperationPlace the front end of the plunger into the backof the syringe. Dispense product by manually pushingthe back of the plunger.TECHNICAL SPECIFICATIONSUsed to DispenseAll approved 10 ml and 30 ml syringes, includingpre-packaged syringes with a 25 ml fillPackage Types & Sizes10 ml and 30 ml syringesViscosity RangeLow to HighAdditional Information For Syringe Accessories, see page 83.TWO-PART DISPENSINGLOCTITE ® 50 ML DUAL CARTRIDGE MANUAL APPLICATORSItem Numbers: 98472 and 1034026The Loctite® 50 ml Dual Cartridge Manual Applicators arehand held, manually-operated meter mix dispensers. Thesedispensers provide a convenient, cost-effective method toapply product with minimal waste. Item 98472 is compatiblewith 1:1 and 1:2 mix ratio products. Optional 4:1 plunger(item 984209) and 10:1 plunger (item 986086) are alsoavailable for standard cartridges. Item 1034026 is usedexclusively for products packaged in 10:1 S- 50 cartridges.Item 1034026Item 98472TECHNICAL SPECIFICATIONSItem Number 98472 1034026Used to DispenseTwo-Component Epoxies, Urethanes, MethacrylatesPackage Types & Sizes 50 ml dual manual cartridge S-50 cartridgeViscosity RangeLow to HighMix Ratios 1:1 / 2:1 / 4:1 / 10:1 10:1Parts IncludedAdditionalInformationAdditional AccessoriesSold SeparatelyReplacementPlungers(1) 50 ml Dual CartridgeManual Applicator(1) 1:1 Plunger(1) 2:1 Plunger (1) Manual(1) 50 ml, 10:1-S CartridgeManual Applicator(1) 10:1-S PlungerFor Additional Static Mix Nozzles and Accessories,see page 82.984209: 4:1 Plunger986086: 10:1 Plunger983533: 1:1 Ratio983534: 2:1 Ratio1 Mix Nozzle available1034575: 10:1-S Mix Nozzle1034024: 10:1 RatioFor additional information and the full line of equipment, visit www.equipment.loctite.com.25

Hand HeldApplicatorsDISPENSINGLOCTITE ® 50 ML DUAL CARTRIDGE PNEUMATIC APPLICATORItem Number: 97042The Loctite® 50 ml Dual Cartridge Pneumatic Applicator (item 97042) is a hand held, pneumaticallyoperateddispenser. It provides a convenient, cost-effective method for applying two-part adhesive productswith minimal effort and waste. The applicator can accept various 50 ml dual cartridge designs for both1:1, 2:1 and 10:1 mix ratios.Features:• Lightweight, well balanced design for easy use• Pneumatic assist assures reduced operator fatigue andconsistent adhesive application• Integrated air pressure regulator• Conveniently positioned thumb wheel with 5 pressureadjustments to control dispense rate• Quick acting trigger insures precise bead controland minimizes product waste• Versatile cartridge holder accepts dual50 ml cartridges with 1:1, 2:1 and 10:1 ratiosTheory of OperationPneumatic air pressure is applied by pulling the trigger switch.This causes the dual pistons to move forward, discharging bothadhesive components of the cartridge at the same rate. Theadhesive is mixed as it travels through a static mix nozzle(available separately) to the working surface. The rate of adhesiveapplication can be adjusted by changing the air pressure usingthe 5-position thumb wheel below the trigger.TECHNICAL SPECIFICATIONSDimensions 14.0" L x 7.6" H x 2.4" D (292 mm L x 191 mm H x 58 mm D)Weight 1.6 lbs. (725 g)Air SupplyAir Supply FittingUsed to DispensePackage Types & Sizes30 to 75 psi1 ⁄4" NPT maleTwo-Component Epoxies, Urethanes, Methacrylates50 ml dual cartridgeParts Included (1) 50 ml Dual Cartridge Pneumatic Applicator (1) ManualViscosity RangeLow to HighMix Ratios 1:1 / 2:1Additional Information For Static Mix Nozzles and Accessories, see page 82.LOCTITE ® CAULKING GUN CONVERSION KITSFOR 50 ML CARTRIDGESItem Numbers: 98466 and 98415The Loctite® Caulking Gun Converters provide an inexpensivemeans of converting a household caulking gun into a handheld meter mix dispenser. Simply insert the converter into ahousehold caulking gun, and you are ready to go. An idealapproach for the occasional user of 1:1, 2:1 and 10:1 ratiotwo-part adhesives. Order Item 98466 for 1:1 or 2:1 ratioadhesives. Order Item 98415 for 10:1 ratio adhesives.Not recommended for high demand orproduction line applications.Household caulking gun notsold by Henkel.Viscosity RangeItem 98466TECHNICAL SPECIFICATIONSLow to HighMix Ratios 1:1 / 2:1 / 10:1Used to DispensePackage Types & SizesParts IncludedItem 98415Two-Component Epoxies, Urethanes, Methacrylates98466: (1) Instruction Sheet(1) Caulking GunConverter(1) 1:1 Ratio Plunger(1) 2:1 Ratio Plunger(2) 50 ml Static MixNozzles (1:1, 2:1)50 ml dual cartridge98415: (1) Caulking GunConverter(1) 10:1 Ratio Plunger(1) Instruction Sheet(2) 50 ml Static MixNozzles (10:1)Additional Information For Static Mix Nozzles and Accessories, see page 82.26For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITE ® 200 ML / 400 ML DUAL CARTRIDGE MANUAL APPLICATORSItem Numbers: 983436, 983438 and 985246The Loctite® 200 ml and 400 ml Dual Cartridge Manual Applicators are hand held,manually-operated meter mix dispensers. Ideally suited for production lineapplications, these applicators provide a convenient, cost-effective method ofapplying product with minimal waste. These applicators are available for 1:1, 2:1and 10:1 mix ratio products. A converter kit is also available for the 400 mlapplicator to accommodate 4:1 mix ratio products (see part numbers below).Mix nozzles are sold separately.List of Applicators983436 – Loctite® 200 ml Dual CartridgeManual Applicator, 1:1 and 2:1 ratios983438 – Loctite® 400 ml Dual CartridgeManual Applicator, 1:1 and 2:1 ratios985246 – Loctite® 400 ml Dual CartridgeManual Applicator, 10:1 ratioTECHNICAL SPECIFICATIONSItem Number 983436 983438 985246Viscosity RangeHigh to PasteMix Ratios 1:1 / 2:1 1:1 / 2:1 10:1Used to DispensePackage Types& SizesAdditionalInformationTwo-Component Epoxies, Urethanes, Methacrylates200 ml dual cartridge 400 ml dual cartridge 400 ml dual cartridgeFor Static Mix Nozzles and Accessories, see page 82.Additional Accessories Sold Separately984211 – Loctite ® 4:1 Conversion KitDISPENSING Hand HeldApplicatorsLOCTITE ® 200 ML / 400 ML DUAL CARTRIDGE PNEUMATIC APPLICATORSItem Numbers: 983437, 983439 and 985249The Loctite® 200 ml and 400 ml Dual Cartridge Pneumatic Applicators are hand held,pneumatically-operated meter mix dispensers. Ideally suited for production lineapplications, these applicators provide a convenient, cost-effective method forapplying product with minimal waste. The adjustable dispense rate is setvia the integral air pressure regulator. The applicators are availablefor 1:1, 2:1 and 10:1 mix ratio products. A converter kit isalso available for the 400 ml applicator to accommodate4:1 mix ratio products (see part numbers below).Mix nozzles are sold separately.List of Applicators983437 – Loctite® 200 ml Dual CartridgePneumatic Applicator, 1:1 and 2:1 ratios983439 – Loctite® 400 ml Dual CartridgePneumatic Applicator, 1:1 and 2:1 ratios985249 – Loctite® 400 ml Dual CartridgePneumatic Applicator, 10:1 ratioTECHNICAL SPECIFICATIONSItem Number 983437 983439 985249Air Pressure SupplyViscosity Range125 psi (8.5 bar) maximumHigh to PasteMix Ratios 1:1 / 2:1 1:1 / 2:1 10:1Adhesive Components 2 2 2Used to DispensePackageTypes & SizesTwo-Component Epoxies, Urethanes, Methacrylates200 ml dualcartridge400 ml dualcartridge400 ml dualcartridgeAdditional Information For Static Mix Nozzles and Accessories, see page 82.Additional Accessories Sold Separately984210 – Loctite ® 4:1 Conversion KitFor additional information and the full line of equipment, visit www.equipment.loctite.com.27

Hand HeldApplicatorsDISPENSINGLOCTITE ® UNIVERSAL METAL DISPENSERItem Number: 985245The Loctite® Universal Metal Dispenser is a hand held, manually-operated dispenser designed for use with two-part adhesivespackaged in 200 ml and 400 ml dual cartridges. The dispenser is capable of handling cartridges with 1:1, 2:1, 4:1 and10:1 mix ratios. This tool is ideally suited for users with a need to occasionally dispensean assortment of mix ratios or package sizes. Mix nozzles are sold separately.Features:• Accepts 200 ml and 400 ml two-component cartridges• Mix ratios of 1:1, 2:1, 4:1, and 10:1• Interchangeable plunger buttons allowapplication of all mix ratios• Dispenses low, medium, and high viscosity materialsTheory of OperationDepress the thumb lever on the back of the dispenser andpull the plunger back. Insert the cartridge, equipped witha static mix nozzle, and push the plunger forward until it isseated onto the cartridge. Dispense product by squeezing thetrigger. Dispense ratios are varied by changing the plungerbuttons supplied with the tool.TECHNICAL SPECIFICATIONSViscosity RangeHigh to PasteAdhesive Components 2Used to DispenseTwo-Component Epoxies, Urethanes, MethacrylatesPackage Types & Sizes200 ml and 400 ml dual cartridgesAdditional Information For Static Mix Nozzles and Accessories, see page 82.LOCTITE ® FIXMASTER ® RAPID RUBBER REPAIR DISPENSERItem Number: 39635The Loctite® Fixmaster® Rapid Rubber Repair Dispenser is a hand held, manually-operateddispenser designed specifically for use with Loctite® Fixmaster® Rapid RubberRepair, a two-part adhesive packaged in 400 ml cartridges.Features:• Wide front opening to fit specific cartridges• Dedicated 1:1 mix ratio• 200 ml x 200 ml dual cartridges• Bottom support straps provide securecartridge location within frame• Ability to handle high viscosity materialsTheory of OperationDepress the thumb lever on the back of the dispenser and pull theplungers back. Insert the cartridge, equipped with a static mixnozzle, and push the plungers forward until they seat onto thecartridge. Dispense product by squeezing the trigger.TECHNICAL SPECIFICATIONSViscosity RangeMedium to HighAdhesive Components 2Used to DispenseLoctite ® Fixmaster ® Rapid Rubber Repair UrethanesPackage Types & Sizes400 ml dual cartridgesAdditional Information For Static Mix Nozzles and Accessories, see page 82.28For additional information and the full line of equipment, visit www.equipment.loctite.com.

CARTRIDGE DISPENSINGLOCTITE ® 300 ML PNEUMATIC CARTRIDGE DISPENSERItem Number: 97002The Loctite® 300 ml Pneumatic Cartridge Dispenser is a hand held unit for dispensing product packaged in 300 ml cartridges and250 ml squeeze tubes. It is especially useful for applications where larger systems and packages,such as a 5 gallon pail pump system, are not desirable.Features:• Integrated pressure regulator• Quick pressure relief• Use with 300 ml cartridges and 250 ml squeeze tubesTypical Applications:The rate of application is controlled bythe integrated air pressure regulator.The amount of product dispensedis controlled bythe trigger.TECHNICAL SPECIFICATIONSAir Inputs125 psi max with 300 ml cartridge22 psi max with 250 ml squeeze tubesPneumatic ConnectionThread Diameter: R 1 ⁄4"Pneumatic Hose: Inner Diameter - 6 mmDimensions8.0" H x 13.5" L x 1.5" DWeight 1.8 lbs. (800 g)Used to DispenseGel Cyanoacrylates, Structural Acrylics, Silicones,Anaerobic Flange SealantsPackage Types & Sizes300 ml cartridgesParts Included(1) 300 ml Pneumatic Cartridge Dispenser(2) Spare Membranes (1) ManualAdditional Information For Cartridge Accessories, see page 81.Additional Accessories Sold Separately989347 – Adapter for 250 ml Squeeze TubesDISPENSING Hand HeldApplicatorsLOCTITE ® FOLDABLE 300 ML CARTRIDGE APPLICATORItem Number: 98500The Loctite® Foldable 300 ml Cartridge Applicator is ahand held, manually-operated dispenser designed for allproducts packaged in 300 ml cartridges. It has an innovativefolding trigger assembly that allows it to be stored in less spaceor carried more conveniently than conventional householdcaulking guns.Features:• Foldable trigger assembly for easy storage• Durable frame for heavy duty use• Dispenses high viscosity silicones and lubricants with easeTECHNICAL SPECIFICATIONSDimensionsOpen: 8.0" H x 13.0" L x 2.5" DTrigger Folded: 4.0" H x 13.0" L x 2.5" DWeight 0.6 lbs. (275 g)Used to DispenseGel Cyanoacrylates, Structural Acrylics, Silicones,Anaerobic Flange Sealants, LubricantsPackage Types & Sizes300 ml cartridgesParts Included (1) Foldable Cartridge Applicator (1) ManualAdditional Information For Cartridge Accessories, see page 81.LOCTITE ® 300 ML PNEUMATIC CARTRIDGE DISPENSER RETAINERItem Number: 98319AThe Loctite® 300 ml Pneumatic Cartridge Dispensing Retainerprovides controlled, pressure/time dispensing of adhesives in300 ml cartridges when used in conjunctionwith the Loctite® Analog Syringe Dispenser(item 98417), Loctite® Precision SyringeDispenser (item 97006), or the Loctite® FootPedal Dispensers (items 98049 and 98050).Pressures up to 60 psi can be obtainedto effectively dispense low to mediumviscosity products and thixotropic gels.Features:• Quick twist open/close cap• Use with 300 ml cartridgesTECHNICAL SPECIFICATIONSAir Inputs70 psi max with 300 ml cartridge22 psi max with 250 ml squeeze tubesProduct ViscosityLow to MediumDimensions10.0" L x 2.5" DWeight 1.8 lbs. (800 g)Used to DispenseGel Cyanoacrylates, Anaerobic Gasketing,Light Cure/Acrylics, SiliconesPackage Types & Sizes300 ml cartridgesParts Included (1) 300 ml Pneumatic Cartridge Dispensing Retainer and CapAdditional Information For Cartridge Accessories, see page 81.For additional information and the full line of equipment, visit www.equipment.loctite.com.29

DISPENSINGTwo-Part VolumetricDispensingDual Cartridge SystemsTwo-Part Volumetric DispensingLoctite® Posi-Link Dispense Systemfor Dual CartridgesWhen you need high precision dispensing from your prepackaged dual cartridgeadhesive, the Loctite® Posi-Link Dispense System is the solution. This system offersdispensing accuracy well beyond any pneumatic cartridge dispenser down to 0.001 mldrop size. This system specifically excels at eliminating dispense variability due tocontinuously changing viscosity (curing) in the mix nozzle. It can easily be integratedinto any automated process and provide process feedback to a plant PLC. Select yoursystem based on cartridge size and adhesive ratio requirements. You can choose50, 200 or 400 ml packages for any 1:1, 2:1 or 10:1 ratio product.theof Volumetric ControlThe END of wettedcomponentsAGELOCTITE ® POSI-LINK CONTROLLER Item Number: 98377Provides all operator interface and control signals to actuator.Features:COMPLETE LOCTITE ® POSI-LINK DUAL CARTRIDGE SYSTEMFor 50 ml Dual Cartridges:Controller + Actuator + NestFor 200/400 ml Dual Cartridges:Controller + Actuator + Nest + Pinch Tube(Each Item Sold Separately)• Dose selection by volume• Easy programming controller, with storagecapacity for 25 user defined programs, reducesadhesive set-up waste• Smallest footprint on the market to conserve benchtop space• Automatic cartridge engagement to ensure easy anderror-free cartridge changeover• Adhesive level monitoring with low level visual and digital outputs• Fault detection with visual and digital outputs for clogged nozzles,loss of pressure, and system faults• In- cycle visual and digital outputs• Foot switch, finger switch or PLC remote start activationLOCTITE ® POSI-LINK ACTUATORS Item Numbers: See chartProvides adhesive dispensing by effecting incremental movements of dual pistons and displacing programmablequalities of adhesive within the cartridge regardless of viscosity changes in the mix nozzle.PRODUCT Item Number Dual Cartridge SizeLoctite ® Posi-Link 10-50 Actuator 98379* 50 mlLoctite ® Posi-Link 200-400 Actuator 98380 200, 400 ml* See pages 9-10 for use with syringes.Features:• Flexible orientation in any position• Easily fits below an industrial workbench or wall mounts with bracketssupplied to conserve benchtop space• Lightweight remote dispense head has a “positive link” to actuator via a 7 foot tether,allowing ergonomic hand held dispensing or mounting directly on robotic arms• Easily attaches to the dual cartridge nests (sold separately) to accommodate alternate cartridge barrel sizes• Mechanically linked dual plungers guarantee proper ratios are achieved• Positive shut-off pinch tube available, which directly attaches to the mix nozzle, eliminating dripping30For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITE ® POSI-LINK 50 MLDUAL CARTRIDGE NESTSItem Number: See chartConnects the actuatorto the dual cartridge.Dual Cartridge Nest Features:• No tool cartridge changeover• No contact with adhesive. Disposable syringesare the only component in contact with the adhesiveLoctite ® Posi-Link Dual Cartridge Nest SelectionLOCTITE ® POSI-LINK 200/400 MLDUAL CARTRIDGES NESTSItem Number: See chartConnects the actuatorto the dual cartridge.1:1 / 2:1 – 50 ml Cartridge 10:1 – 50 ml Cartridge 1:1 / 2:1 – 200 ml Cartridge 1:1 / 2:1 – 400 ml Cartridge 10:1 – 400 ml Cartridge USED WITHDISPENSINGTwo-Part VolumetricDispensingDual Cartridge Systems98641 98642 N/A N/A N/AN/A N/A 98662 98663 98664Loctite ® Posi-Link 10-50 ActuatorLoctite ® Posi-Link 200-400 ActuatorTheory of OperationA disposable dual cartridge is effectively used as a dual metering piston/cylinder. Because the individual chambers of a dualcartridge are of a known and constant diameter, a given incremental measurement of the dual pistons will displace a knownvolume of adhesive within each chamber at an exact ratio. This dual cartridge system functions identically to a Loctite® Posi-LinkSyringe System, except that it has 2 plungers within the dispense head. These plungers simultaneously act on 2 chambers withinthe dual cartridge. See Functionality Diagram on page 10.LOCTITE ® PINCH TUBE VALVE Item Number: 97141Features:• Valve attaches directly tothe end of thesquare mix nozzle• Provides positive no-dripshut off, using disposablepinch tube elementsFOR 50 ML DUAL CARTRIDGES:OPTIONAL: 97141 – Valve +97541 – 10 pack Replacement Tube Inserts + 98671 – Solenoid ValveFOR 200/400 ML DUAL CARTRIDGES:REQUIRED: 97141 – Valve +97541 – 10 pack Replacement Tube Inserts(98671 – Solenoid Valve included with actuator)Loctite ® Posi-Link 10-50 System, Integrated Robotic Solution usinga 50 ml dual cartridge, and showing wall-mounted actuator.PRODUCTTECHNICAL SPECIFICATIONSLoctite ® Posi-Link ControllerLoctite ® Posi-Link 10-50 ActuatorLoctite ® Posi-Link 200-400 ActuatorItem Number 98377 98379 98380PowerSource9' communicationcable100/240 VAC;47/60 Hz100/240 VAC;47/60 HzDimensions 5.375" H x 6" D x 6" W 34" H x 4" D x 5" W 34" H x 4" D x 5" WTotal Weight 2 lbs. 13 lbs. 20 lbs.Dispense HeadWeight(Includes Nest andN/A 2.0 lbs. 10.0 lbs.Pinch Tube Valve)Air Supply N/A 40 to 100 psi 40 to 100 psiPosi-Link Electro/Hydraulic N/A 7 feet 7 feetTetherMinimumDispense VolumeN/A 0.001 ml 0.01 mlMaximumDispense RateMaximumCycle RateUsed toDispenseN/A 0.4 ml/second 1.0 ml/secondN/A 1 cycle per second 1 cycle per secondN/AParts Included (1) Loctite ®Posi-Link Controller(1) Foot SwitchAdditionalInformationAll dual 50 ml cartridge1:1 / 2:1 / 10:1ratio adhesivesAll dual 200 or 400 mlcartridge 1:1 / 2:1 / 10:1ratio adhesives(1) Loctite ® Posi-Link Actuator(1) 9' Controller/Actuator Signal Cord(1) 110 Power Cord(1) Air Inlet Pressure Regulator Gauge(1) Wall or Table Mounting Bracket(1) Instruction ManualFor Spare Parts and Accessories, see pages 84-85.For Static Mix Nozzles and Accessories, see page 82.For additional information and the full line of equipment, visit www.equipment.loctite.com.31

DISPENSINGTwo-Part Volumetric DispensingTwo-Part VolumetricDispensingMeter Mix SystemsLoctite® Meter Mix SystemsWhen your Loctite® two-part adhesive application takes on a larger dimension, Henkel has thetwo-part volumetric dispensing solution with our high precision Loctite® Meter Mix DispenseSystems. You can choose either fixed and variable ratio units for any of our featured systems and,together with a wide selection of reservoir systems, hoses, valves and other accessories, customizeyour system to meet your application requirements.NEWNEWLoctite ® DuraPump PRODUCT Programmable MeterMix SystemMACHINE RATIO CAPABILITIES/ITEM NUMBERSSee page 33 forFixedmore informationLoctite ® DuraPump Pneumatic MeterMix SystemLoctite ®Meter Mix 1000Dispense SystemLoctite ®Meter Mix 2000Dispense SystemLoctite ®Meter Mix 3000Dispense SystemSee page 34 for 988900: Low Flowmore information 988902: High Fow988906 988908Variable N/A N/A988901: Low Flow988903: High Flow988907 988909PERFORMANCE SPECIFICATIONSDispense Range 0.40 cc to 28 cc 0.51 cc to 25 cc (Fixed), 0.51 cc to 21.37 cc (Variable)Cycle Rate Up to 20 per minute Up to 30 per minuteMix Ratio Range by Volume 1:1 to 10.0:1 1:1 to 9.76:1 (Fixed), 1:1 to 41.56:1 (Variable)Maximum Product Feed Pressure 2000 psi 60 psiWETTED COMPONENT MAKEUPAbrasion Resistant Pumps Standard Standard Optional Optional OptionalMild Steel Pumps Not Required Not Required Standard Standard StandardInert Pumps Standard Standard Optional Optional OptionalDISPENSE VALVESMix Manifold(accepts mix nozzle directly)Standard Standard N/A N/A N/AHand Held Valvewith Trigger Pistol GripOptional Optional Optional Optional OptionalHand Held Valvewith Lever ActuationN/A N/A Optional Optional OptionalAdjustable Boom Mounted Valve N/A N/A N/A Optional OptionalSHOT CONTROL CAPABILITIESManual/Operator Controlled Shot Standard Standard Standard Standard StandardMechanically AdjustedLimit Switch Shot ControlN/A Standard N/A Standard StandardPre-Programmed ElectronicShot Size ControlStandard N/A N/A N/A StandardMultiple Pre-ProgrammedShot Size ControlStandard N/A N/A N/A StandardTouchscreen Machine Controls Standard N/A N/A N/A StandardOTHER MACHINE FEATURESFeed Accumulators for BulkPackage Pressure FeedNot Required Not Required Optional Optional OptionalMaintenance Totalizer Standard N/A N/A N/A StandardLow/High Level Sensing Capable Optional – Low Level Only N/A N/A N/A StandardSupervisor Machine Lock-Out Standard N/A N/A N/A StandardPneumatically AdjustableFlow ControlStandard Standard Standard Standard StandardAuto-Purge Capable Standard N/A N/A N/A StandardFoot Switch Controlled Standard Standard N/A Standard Standard32For additional information and the full line of equipment, visit www.equipment.loctite.com.

DISPENSING Two-Part VolumetricDispensingMeter Mix SystemsLOCTITE ® DURAPUMP PROGRAMMABLE METER MIX SYSTEMThe Loctite® DuraPump Meter Mix Systems offer superior operating performance and durability for a wide range of twocomponent adhesive chemistries up to 10:1 ratios. These programmable models provide convenient touch screen digital control forshot size, choice of 3 operating modes, and can easily be integrated with a PLC. Its innovative rod displacement pump designinsures excellent shot repeatability, low wear, and allows direct connection to high pressure feed systems. A static mix nozzle canalso be mounted directly on the integrated mixing manifold, eliminatingthe need for a dispense valve in many applications. Optional reservoirs,level controls, hoses, and valves are also available to complete yourspecific process requirements.Programmable Loctite® DuraPump Fixed Ratio SystemsItem Number Mix Ratio Shot Size Range1041649 1:1 0.4 to 28 ml1041644 2:1 0.4 to 21 ml1041639 4:1 0.4 to 18 ml1041638 10:1 0.4 to 15.5 ml1041635 Custom* Will vary based on ratio selected* Custom ratios available from 1:1 up to 9.99:1.NEWFeatures:• Includes 3 modes, including an incremental shot mode, where shots canbe set and dispensed without recharging• No requirement for pump phasing on start-ups; just start up and go• Direct flow shut off, no check valves to repair or replace• Accepts external feed systems up to 2000 psiwithout extraneous accumulators• Superior pump wear life, especially well suited forhighly filled materials• Mixing manifold discharge accepts mix nozzles directly,Utilitieseliminating the need for a valve in many applications• Available with optional low level sensorsDimensionsTheory of OperationThe Loctite® DuraPump Programmable Meter Mix Systemsaccurately meter dual liquid or semi-solid materials throughouta wide range of viscosities and ratios. The Loctite® DuraPumpassembly ensures high precision volumetric displacement at theselected ratio. Shot size is controlled by a touch screen input.Both liquids move simultaneously and separately into a mixingmanifold. A static mix nozzle is attached to the manifold foreffective mixing of two components prior to being applied.WeightDispense Range/CycleCycle RateUsed to DispensePackage TypesParts IncludedAdditional InformationTECHNICAL SPECIFICATIONSElectric: 110/250 VAC; 50-60 HzPneumatic: 80-110 psi27" H x 12.5" W x 12.5" D80 lbs.0.4 to 28 ml (ratio dependent) – see ratio chartUp to 20/minuteTwo-Part Epoxies, Two-Part Acrylics, Two-Part PolyurethanesAny, excluding dual cartridges1) Loctite ® DuraPump Programmable Meter Mix(1) Foot Switch (1) Night Cap (1) Ratio CapFeed system options and accessoriesare sold separately. See page 39.For additional information and the full line of equipment, visit www.equipment.loctite.com.33

Two-Part VolumetricDispensingMeter Mix SystemsDISPENSINGLOCTITE ® DURAPUMP PNEUMATIC METER MIX SYSTEMThe Loctite® DuraPump Pneumatic Meter Mix Systems offer superior operating performance and durability for a wide range of twocomponent adhesive chemistries, including MMA, up to 10:1 ratios. All of the pneumatic models provide operator shot size controlwith pneumatic foot pedal or optional hand held trigger controlled dispense valve. Its innovative rod displacement pump designinsures excellent shot repeatability, low wear, and allows direct connection to high pressure feed systems. A static mix nozzle canalso be mounted directly on the integrated mixing manifold, eliminating the need for a dispense valve in many applications.Optional reservoirs, level controls, hoses and valves are also available to complete your specific process requirements.NEWPneumatic Loctite® DuraPump Fixed Ratio SystemsItem Number Mix Ratio Shot Size Range1041648 1:1 0.4 to 28 ml1041643 2:1 0.4 to 21 ml1041641 4:1 0.4 to 18 ml1041637 10:1 0.4 to 15.5 ml1041633 Custom* Will vary based on ratio selectedFor MMA Chemistry1041647 1:1 0.4 to 28 ml1041636 10:1 0.4 to 15.5 ml1041620 Custom* Will vary based on ratio selected* Custom ratios available from 1:1 up to 9.99:1.Features:• No electrical power required. Ideal for flammable adhesives (MMAs)and remote locations where only compressed air is available• No requirement for pump phasing on start-ups; just start up and go• Direct flow shut off, no check valves to repair or replace• Systems accept external feed systems up to2000 psi without extraneous accumulators• Superior pump wear life, especially well suited forhighly filled materials• Mixing manifold discharge accepts mixe nozzles directly, Utilitieseliminating the need for a valve in many applicationsDimensionsTheory of OperationThe Loctite® DuraPump Pneumatic Meter Mix Systemsaccurately meter dual liquid or semi-solid materials throughouta wide range of viscosities and ratios. The Loctite® DuraPumpassembly ensures high precision volumetric displacement at theselected ratio. Shot size is controlled by mechanical limitswitches. Both liquids move simultaneously and separately into amixing manifold. A static mixer is attached to the manifold foreffective mixing of two components prior to being applied.WeightDispense Range/CycleCycle RateUsed to DispensePackage TypesParts IncludedAdditional InformationTECHNICAL SPECIFICATIONSPneumatic: 80-110 psi27.0" H x 12.5" W x 12.5" D80 lbs.0.4 to 28 ml (ratio dependent) – see ratio chartUp to 20/minuteTwo-Part MMAs, Two-Part Epoxies, Two-Part Acrylics,Two-Part PolyurethanesAny, excluding dual cartridges1) Loctite ® DuraPump Pneumatic Meter Mix(1) Foot Switch (1) Night Cap (1) Ratio CapFeed system options and accessories aresold separately. See page 39.34For additional information and the full line of equipment, visit www.equipment.loctite.com.

DISPENSINGTwo-Part VolumetricDispensingMeter Mix SystemsLOCTITE ® METER MIX 1000 DISPENSE SYSTEM – OPERATOR TRIGGER CONTROLItem Numbers: 988900, 988901, 988902 and 988903The Loctite® Meter Mix 1000 Dispense Systems are versatiledispensing systems for two-part adhesive chemistries andincorporate a variety of feed system options. Available in fixedor variable ratio, the compact design of the systems allowsbenchtop dispensing. These machines come standard to accepta hand held dispense valve (sold separately). Flow rate isadjustable through the use of a pressure regulator. See technicalspecifications for shot size and mix ratio ranges.Features:• Variable mix ratio capability• Ratio check valves• Adjustable flow control• Mild steel or abrasion resistance pumps available• Operator controlled shot sizeTheory of OperationThe Loctite® Meter Mix 1000 Dispense Systems accuratelymeter dual liquid and semi-solid materials throughouta wide range of viscosities and ratios. They contain two highprecision, volumetric displacement pump assemblies.Selectable paired pump diameters determine the ratio fora fixed system. The variable ratio unit utilizes a pneumaticcylinder to adjust a lever-beam drive link to automaticallychange ratio requirements. Dispensing is controlled usinga pneumatically controlled valve to open (sold separately).Shot size is controlled using a manual vernier selector switchand 4-digit reference. Both liquids move simultaneouslythrough two dispensing hoses, a dispense valve and mixingchamber/static mixer that provide the effective mixing of thetwo components just prior to being applied.FixedVariableUtilitiesDimensionsWeightDispense Range/CycleCycle RateMix Ratio Rangeby VolumeUsed to DispenseTECHNICAL SPECIFICATIONSLow Flow System 1000L 988900High Flow System 1000H 988902Low Flow System 1000L 988901High Flow System 1000H 988903Pneumatic: 80 to 100 psi20.0" H x 15.0" W x 28.0" D75 to 100 lbs.FIXED – 0.51 cc to 25 ccVARIABLE – 0.51 cc to 21.37 ccUp to 30 or more per minute, depending on materialviscosity, hose sizes, and mixer typeFIXED – 1:1 to 9.76:1VARIABLE – 1:1 to 41.56:1Two-Part Epoxies, Two-Part Acrylics, Two-Part PolyurethanesPackage TypesCans, pails, drums, totesParts Included (1) Loctite ® 1000 Meter Mix System – Choice of either8, 10, 15, 20, 25, 30 or 35 mm pump assemblies(depends on ratio and dispense rate requirements)*(1) Pump Mode Off/On pneumatic selector switch(10) Static Mixers (1) Night Cap (1) Ratio CapAdditional Information **Feed system options and accessories are sold separatelyand can be found on pages 39-40.*See pages 41-42 to determine pump diametersrequired for your application.Additional Accessories Sold Separately**• Material reservoirs • Dispense valves • Abrasive resistant• Level sensors • Follower plates wetted components• Reservoir heaters • Desiccant dryers • All 316 stainless steel• Hoses – various sizes • Lock down lid wetted componentsand lengths with agitator for MMAsFor additional information and the full line of equipment, visit www.equipment.loctite.com.35

Two-Part VolumetricDispensingMeter Mix SystemsDISPENSINGLOCTITE ® METER MIX 2000 DISPENSE SYSTEM – MANUAL SHOT SIZEItem Numbers: 988906 and 988907The Loctite® Meter Mix 2000 Dispense Systems are versatiledispensing systems for two-part adhesive chemistries andincorporate a variety of feed system options. Available infixed or variable ratio, the compact design of the systemsallows benchtop dispensing along with a variety of feedsystems and package sizes. These machines are capable ofcontrolled shot size, dispensing through a pre-set mechanicalstroke adjustment. Flow rate is also variable through the use ofa pressure regulator. See technical specifications for shot sizeand mix ratio ranges.Features:• Variable mix ratio capability• Manual vernier shot size selector witha 4-digit reference gauge• Adjustable flow control• Mild steel or abrasion resistant pumps available• Emergency stop palm button• Three position pump mode selector• Three position dispense selector• Foot switch activationTheory of OperationThe Loctite® Meter Mix 2000 Dispense Systems accuratelymeter dual liquid and semi-solid materials throughouta wide range of viscosities and ratios. They contain two highprecision volumetric displacement pump assemblies. Selectablepaired pump diameters determine the ratio for a fixed system.The variable ratio unit utilizes a pneumatic cylinder to adjusta lever-beam drive link to automatically change ratiorequirements. Shot size is controlled using a manual vernierselector switch and 4-digit reference. Both liquids movesimultaneously through two dispensing hoses, a dispense valveand mixing chamber/static mixer that provide the effectivemixing of the two components just prior to being applied.TECHNICAL SPECIFICATIONSItem NumbersFixed 988906Variable 988907UtilitiesPneumatic80 to 110 psiElectric120 VACDimensions20.0" H x 15.0" W x 28.0" DWeight75 to 100 lbs.Dispense Range/CycleFIXED – 0.51 cc to 25 ccVARIABLE – 0.51 cc to 21.37 ccCycle RateUp to 30 or more per minute, depending on materialviscosity, hose sizes, and mixer typeMix Ratio Rangeby VolumeFIXED – 1:1 to 9.76:1VARIABLE – 1:1 to 41.56:1Used to Dispense Two-Part Epoxies, Two-Part Acrylics, Two-Part PolyurethanesPackage TypesCans, pails, drums, totesParts Included(1) Loctite ® 2000 Meter Mix System – Choice of either8 mm, 10 mm, 15 mm, 20 mm or 25 mm pump assemblies(depends on ratio and dispense rate requirements)*(1) Night Cap (1) Ratio Cap (10) Static MixersAdditional Information **Feed system options and accessories are sold separatelyand can be found on page 39-40.*See pages 41-42 to determine pump diametersrequired for your application.Additional Accessories Sold Separately**• Material reservoirs • Dispense valves • Follower plates• Lock down lid with agitator • Reservoir heaters • Desiccant dryers• Hoses – various sizes • Abrasive resistant • Mounted trigger assemblyand lengths wetted components for dispense valve36For additional information and the full line of equipment, visit www.equipment.loctite.com.

DISPENSING Two-Part VolumetricDispensingMeter Mix SystemsLOCTITE ® METER MIX 3000 DISPENSE SYSTEM – PROGRAMMABLE SHOT SIZEItem Numbers: 988908 and 988909The Loctite® Meter Mix 3000 Dispense Systems are versatiledispensing systems for two-part adhesive chemistries andincorporate a variety of feed system options. Available in fixedor variable ratio, the systems offer programmable shot sizeand integrated PLC controls with convenient touch screencapability. These units come standard with mild steel pumpcomponents with optional abrasion resistant or 304 stainlesssteel. See technical specifications for shot size and mix ratioranges for both units.Features:• Fixed and variable mix ratio capability• Programmable shot size selection from touch screen• Ratio check valves• Adjustable flow control• Mild steel or abrasion resistant pumps available• 4.5" W x 3.4" H monochrome touch screen and PLC• Cycle totalizer• Maintenance totalizer• Automatic purge controller• Emergency stop palm button• Foot switch activationTheory of OperationThe Loctite® Meter Mix 3000 Dispense Systems accuratelymeter dual liquid and semi-solid materials throughouta wide range of viscosities and ratios. They contain twohigh precision volumetric displacement pump assemblies.Selectable paired pump diameters determine the ratio fora fixed system. The variable ratio unit utilizes a pneumaticcylinder to adjust a lever-beam drive link to automaticallychange ratio requirements. Shot size is controlled usinga PLC interface for stroke adjustment. Both liquids movesimultaneously through two dispensing hoses and a dispensevalve and mixing chamber/static mixer that provide theeffective mixing of the two components just prior tobeing applied.TECHNICAL SPECIFICATIONSItem NumbersFixed 988908Variable 988909UtilitiesPneumatic80 to 115 psiElectric120 VACDimensions20.0" H x 15.0" W x 28.0" DWeight75 to 100 lbs.Dispense Range/CycleFIXED – 0.51 cc to 25 ccVARIABLE – 0.51 cc to 21.37 ccCycle RateUp to 30 or more per minute, depending on materialviscosity, hose sizes, and mixer typeMix Ratio Rangeby VolumeFIXED – 1:1 to 9.76:1VARIABLE – 1:1 to 41.56:1Used to Dispense Two-Part Epoxies, Two-Part Acrylics, Two-Part PolyurethanesPackage TypesCans, pails, drums, totesParts Included(1) Loctite ® 3000 Meter Mix System – Choice of either8 mm, 10 mm, 15 mm, 20 mm or 25 mm pump assemblies(depends on ratio and dispense rate requirements)*(1) Night Cap (1) Ratio Cap (10) Static MixersAdditional Information **Feed system options and accessories are sold separatelyand can be found on pages 39-40.*See pages 41-42 to determine pump diametersrequired for your application.Additional Accessories Sold Separately**• Material reservoirs • Dispense valves • Follower plates• Lock down lid with agitator • Reservoir heaters • Desiccant dryers• Hoses – various sizes • Abrasive resistant • Mounted trigger assemblyand lengths wetted components for dispense valveFor additional information and the full line of equipment, visit www.equipment.loctite.com.37

DISPENSINGLoctite® DuraPump Selector GuideAdhesive Feed OptionsTwo-Part VolumetricDispensingMeter Mix SystemsGravity Tanks(< 7,000 cps)PE Tank316SS TankDispense ValveGeneral PurposeMMAPistol Grip OptionLoctite ® DuraPump Meter Mix System 1Hose OptionsPressure Reservoirs(7,000 to 70,000 cps)Various Lengthsand DiametersPail Pumps( > 70,000 cps)Mix Nozzle Manifold – Direct MixNozzle Attachment1 See page 39 for Loctite® DuraPumpFeed and Dispensing OptionsLoctite® Meter Mix 1000, 2000 and 3000 Dispense SystemsAccessory-Option Selector GuideDispenseMMD Dispense Valve 1 Valve Control OptionsHose Configuration 2Stainless Steel 1:1Stainless Steel 10:1Abrasion Resistant 1:1Abrasion Resistant 10:1Hand Held ValveLever Actuated ValveFoot Pedal ActuatedLengthDiameterPumpsPump Seals 3 Pump SizesPump Construction Material 4VitonEPSized for Dispense VolumeMild SteelStainless SteelAbrasion ResistantSystem OptionsHeatAgitation 5 Precision FlowVacuum System PLC BackupControl DriveLevel SensingGravity FeedPressure Feed 6 Feed PackageReservoir MaterialsReservoir SizeMild SteelStainless SteelPolyethylene5 or 7.5 L5 Gallon55 Gallon1 Stainless steel is the standard material. Abrasion resistant should be used when abrasive fillers are present.Mix ratios from 1:1 to 5:1 require the 1:1 valve, mix ratios >5:1 require the 10:1 valve.2 Viscosity and mix ratio are dependent. High mix ratios and viscosities = larger diameters, Low mix ratios and viscosities = smaller diameters.3 Viton for epoxy resin, urethane resin and hardener, and silicone resin and hardener. EP for epoxy hardener and MMA resin and hardener.4 Mild steel is standard. Stainless should be used for materials that are incompatible with mild steel. Abrasion resistant should be used when abrasive fillers are present.5 Required for highly filled materials. Mixing suspends the filler in the fluid.6 Require the use of an accumulator. Can be used for drums, pails, or reservoirs.38For additional information and the full line of equipment, visit www.equipment.loctite.com.

Loctite® Brand Meter Mix System Options and AccessoriesAll items sold separately, except where noted.Loctite® DuraPump ModelsPRODUCTItemNumberDURAPUMP DISPENSE VALVES – OptionalDescription1051664 Dispense Valve – General Purpose (All ratios)1051662 Dispense Valve – MMA (All Ratios)1051661Pistol Grip with Pneumatic Trigger(Converts Dispense Valve into a Hand-held Tool)DURAPUMP HOSE KIT – 2 required for each dispense valve105169210516911051693Hose for Dispense Valve –3 ⁄8" x 24" General PurposeHose for Dispense Valve –3 ⁄8" x 96" General PurposeHose for Dispense Valve –3⁄8" x 144" General Purpose1051670 Hose for Dispense Valve – 3 ⁄8" x 24" MMA1051669 Hose for Dispense Valve – 3 ⁄8" x 96" MMA1051694 Hose for Dispense Valve – 3 ⁄8" x 144" MMA1051668 DuraPump Heated Hose Option – 48"1051667 DuraPump Heated Hose Option – 96"1051666 DuraPump Heated Hose Option – 144"All Loctite ® DuraPump hose kits come complete with 2 fittingsfor connection to the DuraPump System and Dispense Valve.DURAPUMP RESERVOIR OPTIONSSHOWN:2 Poly Tanksmounted on1 Dual Tank Stand1051660105165910516519.5 L Poly Gravity Tank with Cover(Requires 1051651)7 L Stainless Steel Gravity Tank with Cover(Requires 1051651)Dual Tank Stand(1 Required for each pair pf Gravity Tanks)1051657 Disposable Desiccant Air Dryer Option10516561051655105165410516301051629DURAPUMP CONTROL OPTIONSFollower Plate with Handle(For Stainless Steel Tank Only)Agitator Assembly(For Stainless Steel Tank Only)Tank Heater and Controls Option(For Stainless Steel Tank Only)Low Level Sensing Option – Stainless Steel Tank(Programmable DuraPump Only)Low Level Sensing Option – Poly Tank(Programmable DuraPump Only)1051627 Hose Heat Controller – For 1 or 2 Heated Hoses1051695 Precision Hydraulic Flow ControllerMMD 1000, 2000 and 3000 ModelsItemPRODUCTNumberDISPENSE VALVESHOSES – All Braided Stainless SteelDescription989025 Pistol Grip, Pneumatic Switch Option, (MMD 1000)989026 Dispense Valve – 1:1 Nose, Abrasion Resistant989027 Dispense Valve – 1:1 Nose, Stainless Steel989098 Dispense Valve – 10:1 Nose, Stainless Steel989099 Dispense Valve – 10:1 Nose, Abrasion Resistant989353 Pistol Grip, Electric Switch Option, (MMD 2000, 3000)989354 Lever Actuated, 1 ⁄4" Pneumatic Switch Option989355 Lever Actuated, 3 ⁄8" Pneumatic Switch Option989356 Lever Actuated, 3 ⁄8" Electric Switch OptionVALVE MOUNTING BOOMS989415 Valve Mounting Boom – 5 or 7 L Tanks989416 Valve Mounting Boom – 5 gallon Tanks989195 MMD Hose – 3 ⁄16" x 24", Stainless Steel Fittings989198 MMD Hose – 3 ⁄16" x 72", Stainless Steel Fittings989201 MMD Hose – 3 ⁄16" x 120", Stainless Steel Fittings989202 MMD Hose – 1 ⁄4" x 24", Mild Steel Fittings989203 MMD Hose – 1 ⁄4" x 72", Mild Steel Fittings989204 MMD Hose – 1 ⁄4" x 120", Mild Steel Fittings989205 MMD Hose – 1 ⁄4" x 24", Stainless Steel Fittings989206 MMD Hose – 1 ⁄4" x 72", Stainless Steel Fittings989207 MMD Hose – 1 ⁄4" x 120", Stainless Steel Fittings989208 MMD Hose – 3 ⁄8" x 24", Mild Steel Fittings989209 MMD Hose – 3 ⁄8" x 72", Mild Steel Fittings989210 MMD Hose – 3 ⁄8" x 120", Mild Steel Fittings989211 MMD Hose – 3 ⁄8" x 24", Stainless Steel Fittings989212 MMD Hose – 3 ⁄8" x 72", Stainless Steel Fittings989213 MMD Hose – 3 ⁄8" x 120", Stainless Steel Fittings989214 MMD Hose – 1 ⁄2" x 24", Mild Steel Fittings989215 MMD Hose – 1 ⁄2" x 72", Mild Steel Fittings989216 MMD Hose – 1 ⁄2" x 120", Mild Steel Fittings989217 MMD Hose – 1 ⁄2" x 24", Stainless Steel Fittings989218 MMD Hose – 1 ⁄2" x 72", Stainless Steel Fittings989219 MMD Hose – 1 ⁄2" x 120", Stainless Steel FittingsSTAINLESS STEEL – 5 and 7.5 Liter Stainless Steel Reservoir Options988988 5 L Stainless Steel Tank with Cover988989 7.5 L Stainless Steel Tank with Cover988991 7.5 L Tank High-Low & Vac. Ready – Mild Steel (MMD 3000)988993 7.5 L Tank High-Low & Vac. Ready – SS (MMD 3000)988994 Recirculation for 5 or 7.5 L Tanks989012 Disposable Desiccant Air Dryer and Lock Down Lid989013 Follower Plate with Handle989015 Electric Agitator Assembly with Cover989023 Heat Blanket (720 W) and Insulation for 5 or 7.5 L Tank989024 Hose Heater (50 W) and Insulation for 1 ⁄2" or 3 ⁄8" x 2' long989030 Low Level Sensor for one 7.5 L Tank989037 7.5 L Tank, High-Low Sensor Ready (MMD 3000 only)989230 High and Low Level Sensor for one 5 or 7.5 L Tank989231 High and Low Level Sensors with Auto Refill989232 Disposable Desiccant Air Dryer989276 5 or 7.5 L Tank – Vacuum Ready, Mild SteelDISPENSING Two-Part VolumetricDispensingMeter Mix SystemsFor additional information and the full line of equipment, visit www.equipment.loctite.com.39

DISPENSINGLoctite® Brand Meter Mix Feed System Options and Accessories forMeter Mix 1000, 2000 and 3000 Dispense Systems OnlyAll items sold separately, except where noted.Two-Part VolumetricDispensingMeter Mix SystemsPRODUCTItemNumberDescriptionACCUMULATOR FEED OPTIONS - (Accumulator Replaces the Tank on that Side)989016Aluminum Accumulator; High-LowElectric Controls989017Stainless Steel Accumulator;High-Low Electric Controls989233Aluminum Accumulator;High-Low Pneumatic Controls989234Stainless Steel Accumulator;High-Low Pneumatic Controls5 GALLON TANK FEED OPTIONS988995 6.9 CFM Vacuum Pump Assembly988997 Pressure - Vacuum Tank – Mild Steel988998 Electric Agitator – 1 Tank988999 Tank Support Stand – Holds 2 Tanks989000 Disposable Desiccant Dryer – 5 gallon989001 Nitrogen Harness Assembly – 1 Tank989002 Nitrogen Harness Assembly – 2 Tanks989003 Polyethylene Tank Assembly989004 Polyethylene Follower Plate989005 Tank Air Pressure Assembly989006 Low Level Control Sensor (MMD 3000 only)989007High & Low Level Control Sensors(MMD 3000 only)989008 Pressure - Vacuum Tank – Stainless Steel989011 Pump Inlet Adapter Fitting989031 Vacuum Valving Assembly – 1.0", Mild Steel989033 Vacuum Valving Assembly – 1.0", Stainless Steel989277 Heat Blanket Insulation – 1750 wattsELECTRICAL HEAT CONTROLS989019 Electrical Enclosure and Controls for 1 Heat Load989020Electrical Enclosure and Controls for2 Heat Loads989021Electrical Enclosure and Controls for3 Heat Loads989022Electrical Enclosure and Controls for4 Heat LoadsSYSTEM CONTROL OPTIONS989018 Precision Flow Control Drive – (MMD 3000 only)989274PLC Program Backup/Upgrade –(MMD 3000 only)989661 PLC Interface Cable – (MMD 3000 only)988996 Remote Operator ControlsSHIPPING CRATES989035 Shipping Crate – 5 and 7.5 L Systems989235 Shipping Crate – 5 gallon Tank SystemsPRODUCTPUMP MATERIAL OPTIONSRATIO CHECK VALVESItemNumber988912988913989029PUMP PAIR CONFIGURATIONS – All Mild Steel -(Standard sizes included in system pricing)DescriptionAbrasion Resistant Pumps instead ofMild Steel304 Stainless Steel Pumps instead ofMild Steel3-way Stainless Steel RatioCheck Valve Upgrade988924 8 mm High, 8 mm Low988925 8 mm High, 10 mm Low988926 8 mm High, 15 mm Low988927 8 mm High, 20 mm Low988928 8 mm High, 25 mm Low988931 10 mm High, 8 mm Low988932 10 mm High, 10 mm Low988933 10 mm High, 15 mm Low988934 10 mm High, 20 mm Low988935 10 mm High, 25 mm Low988938 15 mm High, 8 mm Low988939 15 mm High, 10 mm Low988940 15 mm High, 15 mm Low988941 15 mm High, 20 mm Low988942 15 mm High, 25 mm Low988945 20 mm High, 8 mm Low988946 20 mm High, 10 mm Low988947 20 mm High, 15 mm Low988948 20 mm High, 20 mm Low988949 20 mm High, 25 mm Low988952 25 mm High, 8 mm Low988953 25 mm High, 10 mm Low988954 25 mm High, 15 mm Low988955 25 mm High, 20 mm Low988956 25 mm High, 25 mm Low988980 8 mm High, Custom Diameter Low988981 10 mm High, Custom Diameter Low988982 15 mm High, Custom Diameter Low988983 20 mm High, Custom Diameter Low988984 25 mm High, Custom Diameter Low988985 30 mm High, Custom Diameter Low988986 35 mm High, Custom Diameter Low988973 Custom Diameter High, 8 mm Low988974 Custom Diameter High, 10 mm Low988975 Custom Diameter High, 15 mm Low988976 Custom Diameter High, 20 mm Low988977 Custom Diameter High, 25 mm Low988978 Custom Diameter High, 30 mm Low988979 Custom Diameter High, 35 mm Low40For additional information and the full line of equipment, visit www.equipment.loctite.com.

Meter Mix Dispensing SystemsPump Selector GuidesFixed Ratio Systems for Meter Mix 1000, 2000 and 3000 Dispense SystemsAll Loctite® brand MMD machines include two (2) standard pump sizes: 8, 10, 15, 20 and 25 mm.CHART 1 - Fixed Ratio Pump Diameter Configuration and Corresponding Mix RatioHIGH VOLUME PUMP (mm) 8.000 9.500 10.000 11.000 12.000 13.000 14.000 15.000 20.000 25.000LOW VOLUME PUMP (mm) Output CCs 1.277 1.800 1.995 2.414 2.873 3.371 3.910 4.489 7.980 12.4688.000 1.277 1.00 1.41 1.56 1.89 2.25 2.64 3.06 3.52 6.25 9.779.500 1.800 1.00 1.11 1.34 1.60 1.87 2.17 2.49 4.43 6.9310.000 1.995 1.00 1.21 1.44 1.69 1.96 2.25 4.00 6.2511.000 2.414 1.00 1.19 1.40 1.62 1.86 3.31 5.1712.000 2.873 1.00 1.17 1.36 1.56 2.78 4.3413.000 3.371 1.00 1.16 1.33 2.37 3.7014.000 3.910 1.00 1.15 2.04 3.1915.000 4.489 1.00 1.78 2.7820.000 7.980 1.00 1.5625.000 12.468 1.00Pump sizes = WHITE; Maximum output per single pump = BLUE; Volumetric mix ratio (high volume component/low volume component) = BLACKDISPENSING Two-Part VolumetricDispensingMeter Mix SystemsSELECTION PROCESS1. Determine the adhesive shot volume required per part in cubic centimeters (cc’s; same as ml’s), from production requirements.2. From adhesive technical data sheet, determine the adhesive volumetric mix ratio(high volume component/low volume component).3. Review the blue maximum outputs for a volume which is 50% to 90% of the maximum output volume of the combined pumpsize configuration. Be sure to combine a high volume and low volume pump for the corresponding maximum output volume ofthe combined pumps, see example 1.a. If the adhesive shot volume required is greater than that of the maximum possible output of the configurations, divide the required shotvolume by the smallest number which makes the required shot volume less than the maximum possible output for that configuration.Then repeat step 4. The divisor is the number of cycles the machine must perform to meet the required shot volume, see example 2.b. Compare the maximum output volume of the combined pump configuration to the white mix ratio for that combination of pumpsizes. If the corresponding mix ratio does not exactly match that of the adhesive, review the chart for other alternatives, or specifyone pump from the chart, along with a Custom pump size, which will yield the exact pump configuration required for the adhesivesmix ratio, see example 2 and see custom pump volume calculation example below**.EXAMPLE #1 FIXED RATIO –STANDARD PUMP SIZES APPLYHigh volume = 1 Low volume = 1Mix ratio = 1/1 = 1Per part shot size = 6 cc (6 ml)High volume pump = 15 mm Low volume pump = 15 mmVolumetric mix ratio = 1/1Maximum pump combination output = 8.978 cc(6 cc / 8.978 cc) x 100% = 67% - ‡ o.k.Recommended pump configuration = 15 mm/15 mm15 mm pumps are standard sizes; therefore no custom pump fee is required.** CUSTOM PUMP VOLUME CALCULATION – π x (Cylinder Radius) 2EXAMPLE #2 FIXED RATIO –1 CUSTOM PUMP SIZE AND 2 CYCLES REQUIRED FOR REQUIRED SHOT SIZEHigh volume = 2 Low volume = 1 Mix ratio = 2/1 = 2Per part shot size = 22.5 cc (22.5 ml)Maximum output volume of 2:1 combination ~ 18.7 cc with a25 mm/17.675 mm pump configurationPer part shot size divided by 2 = 11.25 cc (11.25 ml)High volume pump = 25 mm Low volume pump = 17.675 mmVolumetric mix ratio = 2/1Maximum pump combination output = 18.7 cc(11.25 cc/18.7 cc) x 100% = 60% - ‡ o.k.Two (2) shots per part are needed to obtain 22.5 cc per part shot size requirement.Recommended pump configuration = 25 mm / 17.675 mm25 mm pump is standard; 17.675 mm pump is special.One custom pump sizing fee applies.TO CALCULATE PUMP VOLUMES FOR CUSTOM PUMP SIZES – USE THE FOLLOWING EXAMPLE (Note: All pump lengths are 2.54 cm)Volume of cylinder = (π x (Cylinder Radius) 2 x Cylinder Length) *(NOTE: Need to convert pump diameter to radius and pump size from mm to cm)*For a 16 mm diameter cylinder: Cylinder Radius = 16 mm /2 = 8 mm or 0.80 cm; Cylinder Length = 2.54 cm; π = 3.14159Volume of 16 mm Pump = (3.14159) x (0.80 cm) 2 x 2.54 cm = 5.107 ccFor additional information and the full line of equipment, visit www.equipment.loctite.com.41

DISPENSINGVariable Ratio Systems for Meter Mix 1000, 2000 and 3000 Dispense SystemsVariable ratio machines are capable of changing the mix ratio within the pump configurations capabilities. To specify a VARIABLE RATIOpump configuration, use chart 2. Variable ratio units have the same standard pump sizes; 8, 10, 15, 20 and 25 mm.CHART 2 - Variable Ratio Pump Diameter Configuration and Corresponding Mix RatioTwo-Part VolumetricDispensingMeter Mix SystemsHIGH VOLUME PUMP (mm) 8.000 9.500 10.000 11.000 12.000 13.000 14.000 15.000 20.000 25.000 30.000 35.000LOW VOLUME PUMP (mm) Output CCs 1.277 1.800 1.995 2.414 2.873 3.371 3.910 4.489 7.980 12.468 17.954 24.4388.000 @ MAX 0.906 1.41 1.99 2.20 2.66 3.17 3.72 4.31 4.95 8.80 13.75 19.81 26.968.000 @ MIN 0.300 4.26 6.00 6.65 8.05 9.57 11.24 13.03 14.96 26.60 41.56 59.84 81.459.500 @ MAX 1.278 1.00 1.41 1.56 1.89 2.25 2.64 3.06 3.51 6.24 9.75 14.05 19.129.500 @ MIN 0.423 3.02 4.26 4.72 5.71 6.79 7.97 9.24 10.61 18.86 29.47 42.44 57.7610.000 @ MAX 1.416 0.90 1.27 1.41 1.70 2.03 2.38 2.76 3.17 5.63 8.80 12.68 17.2510.000 @ MIN 0.469 2.72 3.84 4.26 5.15 6.13 7.19 8.34 9.57 17.02 26.60 38.30 52.1311.000 @ MAX 1.714 0.74 1.05 1.16 1.41 1.68 1.97 2.28 2.62 4.66 7.28 10.48 14.2611.000 @ MIN 0.567 2.25 3.17 3.52 4.26 5.06 5.94 6.89 7.91 14.07 21.98 31.65 43.0812.000 @ MAX 2.040 0.63 0.88 0.98 1.18 1.41 1.65 1.92 2.20 3.91 6.11 8.80 11.9812.000 @ MIN 0.675 1.89 2.67 2.96 3.58 4.26 4.99 5.79 6.65 11.82 18.47 26.60 36.2013.000 @ MAX 2.394 0.53 0.75 0.83 1.01 1.20 1.41 1.63 1.88 3.33 5.21 7.50 10.2113.000 @ MIN 0.792 1.61 2.27 2.52 3.05 3.63 4.26 4.94 5.67 10.07 15.74 22.66 30.8414.000 @ MAX 2.776 0.46 0.65 0.72 0.87 1.03 1.21 1.41 1.62 2.87 4.49 6.47 8.8014.000 @ MIN 0.919 1.39 1.96 2.17 2.63 3.13 3.67 4.26 4.88 8.68 13.57 19.54 26.6015.000 @ MAX 3.187 0.40 0.56 0.63 0.76 0.90 1.06 1.23 1.41 2.50 3.91 5.63 7.6715.000 @ MIN 1.055 1.21 1.71 1.89 2.29 2.72 3.20 3.71 4.26 7.57 11.82 17.02 23.1720.000 @ MAX 5.666 0.23 0.32 0.35 0.43 0.51 0.60 0.69 0.79 1.41 2.20 3.17 4.3120.000 @ MIN 1.875 0.68 0.96 1.06 1.29 1.53 1.80 2.09 2.39 4.26 6.65 9.57 13.0325.000 @ MAX 8.852 0.14 0.20 0.23 0.27 0.32 0.38 0.44 0.51 0.90 1.41 2.03 2.7625.000 @ MIN 2.930 0.44 0.61 0.68 0.82 0.98 1.15 1.33 1.53 2.72 4.26 6.13 8.3430.000 @ MAX 12.747 0.10 0.14 0.16 0.19 0.23 0.26 0.31 0.35 0.63 0.98 1.41 1.9230.000 @ MIN 4.219 0.30 0.43 0.47 0.57 0.68 0.80 0.93 1.06 1.89 2.96 4.26 5.7935.000 @ MAX 17.351 0.07 0.10 0.11 0.14 0.17 0.19 0.23 0.26 0.46 0.72 1.03 1.4135.000 @ MIN 5.743 0.22 0.31 0.35 0.42 0.50 0.59 0.68 0.78 1.39 2.17 3.13 4.26SELECTION PROCESS1. Determine the adhesive shot volume required per part, in cubic centimeters (cc’s; same as ml’s), from production requirements.2. From adhesive technical data sheet, determine the adhesive volumetric mix ratio(high volume component/low volume component).3. Review the pump pair combination and corresponding blue maximum and minimum output and ratio range requirements within thewhite or gray grids and choose a configuration using the following parameters See examples 3 and 4.a. The required shot must be > 15% of the minimum output (cc’s) of the combined pump pair configuration. The minimumpump configuration output is equal to the High Side Pump + minimum output for the Low Side Pump.b. The required shot should be < 85% of the of the maximum output (cc’s) of the pump pair configuration. The maximumpump configuration output is equal to the (High Side pump CC maximum + maximum Low Side Pump).4. As with fixed ratio, if required volumes are exceeded or mix ratios are not exact, repeat steps 3a or 3b in thefixed ratio selection process.EXAMPLE #3 VARIABLE RATIO – EPOXY PRODUCT AHigh volume = 2 Low volume = 1Mix ratio = 2/1 = 2Per part shot size = 2.5 cc (2.5 ml)High volume pump = 15 mm Low volume pump = 13 mm15% min pump combination output = 0.7921 cc (0.15 x 4.489 cc + 0.7921 cc)85% max pump combination output = 5.850 cc (4.489 cc + 2.394 cc) x 0.85)Mix ratio range = 1.88:1 – 5.67:1 - passShot size of 2.5 cc within 15% ruleRecommended configuration = 15 mm /13 mm15 mm pump is standard; 13 mm pump is special. One special pump-sizing fee applies.EXAMPLE #4 VARIABLE RATIO – EPOXY PRODUCT BHigh volume = 4 Low volume = 1Mix ratio = 4/1 = 4Per part shot size = 5.0 cc (5.0 ml)High volume pump = 15 mm Low volume pump = 13 mm15% min pump combination output = 0.7921 cc (0.15 x 4.489 cc + 0.7921 cc)85% max pump combination output = 5.850 cc (4.489 cc + 2.394 cc) x 0.85)Mix ratio range = 1.88:1 – 5.67:1 - passShot size of 2.5 cc within 15% ruleRecommended configuration = 15 mm/13 mm15 mm pump is standard; 13 mm pump is special. One special pump-sizing fee applies.42For additional information and the full line of equipment, visit www.equipment.loctite.com.

Hand Held Hot Melt ApplicatorsLoctite® Hysol hand held hot melt applicators are state-of-the -art dispensing unitsdesigned for the application of hot melt adhesives. These units combine ergonomics, userfriendlydesign, and reliability. Selection of a Loctite® Hysol hot melt applicator should bebased on the type of hot melt being used, stick diameter, and process requirements.DISPENSING Hand Held HotMelt ApplicatorsPRODUCTItemNumberStickDiameterDispenseMelt RateDispensePowerDispenseTemperatureHot MeltChemistry1⁄ 2 INCH SUPERSTICK DISPENSERSNEWLoctite ® Hysol 050A 9162824 lbs./hr.195°C EVA/Polyolefin1⁄2"Superstick ManualLoctite ® Hysol 050 98544 Sticks 3 lbs./hr. 195°C EVA/PolyolefinLoctite ® Hysol 050-HT 98545 4 lbs./hr. 215°C PolyamideNEWLoctite ® Hysol 050-GAS 9162681⁄2"Superstick Sticks3 lbs./hr. Manual 195°C EVA/PolyolefinNEW3⁄ 4 INCH MAXISTICK DISPENSERSLoctite ® Hysol 050-LITE 9162811⁄2"Superstick Sticks1.5 lb./hr. Manual 204°C EVA/PolyolefinLoctite ® Hysol 075 98033 3 ⁄4" 9 lb./hr.182°C EVAMaxistick ManualLoctite ® Hysol 075-LT 98034 Sticks 5 lb./hr. 121°C CoolMelt1 3 ⁄ 4 INCH SPRAYPAC ® AND POLYSHOT DISPENSERSLoctite ® Hysol 175-AIR 98036 1 3 ⁄4"195°CPolyshot 8 lbs./hr. ElectricLoctite ® Hysol 175-AIR-HT 98040 Sticks215°CLoctite ® Hysol 175-SPRAY 98037 1 3 ⁄4"195°CSprayPac ® 8 lbs./hr. ElectricLoctite ® Hysol 175-SPRAY-HT 98041 Sticks215°CEVA/PolyolefinPolyamideLoctite ® Hysol 175 980351 3 ⁄4"Polyshot Sticks6.6 lbs./hr. Manual195°C and215°C**EVA/Polyolefinand PolyamideURETHANE DISPENSERLoctite ® Hysol ReactiveUrethane Cartridge Dispenser98011 N/A 3 lbs./hr. Air 121°CReactiveUrethaneHOT MELT BENCH MOUNT AND CONTROLLER OPTIONSLoctite ® Hot MeltBench Mount KitLoctite ® Hot MeltPneumatic Timer9804298043N/A N/A N/A N/A EVA/Polyamide** The Loctite ® Hysol 175 Dispenser (manual electric) is supplied with both temperature modules.For additional information and the full line of equipment, visit www.equipment.loctite.com.43

DISPENSINGHand Held HotMelt Applicators1⁄ 2 INCH SUPERSTICK DISPENSERSLOCTITE ® HYSOL 050A / 050 / 050-HTItem Numbers: 916282, 98544 and 98545Loctite® industrial grade 1 ⁄2" stick EVA and polyolefin hot melt applicators are now available in two styles to meet your preferredgrip and comfort. Loctite® Hysol 050 and 050A are both lightweight and easy to use. Electrically heated, lightweight and eachwith their own ergonomic, easy pull triggers ensure operator comfort for long term high performance and reliability. The Loctite®Hysol 050-HT model is also available for polyamide hot melts.Features:• Lightweight, well balanced, and ergonomically designed easypull triggers for operator comfort and application control• Fast heat up time for virtually immediate use• Completely enclosed heater housing for maximum safety• Fixed precision thermostat temperature controlfor consistent heatingTheory of OperationThe dispense rate and timing are manually controlled with thetrigger mechanism.Items98544 and 98545PRODUCTTECHNICAL SPECIFICATIONSLoctite ®Hysol 050ALoctite ®Hysol 050Loctite ®Hysol 050-HTItem Number 916282 98544 98545Required Voltage120 VAC; 60 Hz; single phaseUtilities Power 250 watts 500 wattsNominal StickDiameter1 ⁄2" Superstick Size 2.0" W x 12.0" L x 6.5" H 3.25" W x 10.75" L x 7.5" HWeight 1.25 lbs. 1.15 lbs.Dispense PowerManualPower Cord Length 6.0 feet (72") 6.5 feet (78")Warm-Up Time 3 to 5 minutes 4 to 5 minutesDispense Melt Rate 4 lbs./hour 3 lbs./hour 4 lbs./hourDispenseTemperature193°C 195°C 215°CHot Melt ChemistryEVA and Polyolefin EVA and Polyolefinhot meltshot meltsPolyamide hot meltsPartsIncludedAdditionalInformation(1) Hysol 050, 050-HT or 050A Hot Melt Applicator(1) Manual (1) Standard Nozzle(1) Plastic Stand (1) Wire HangerFor Hot Melt Nozzles and Accessories, see page 49.NEWNEWItem 916282LOCTITE ® HYSOL 050-GASItem Number: 916268The Loctite® Hysol 050-GAS Hot Melt Applicator is a hand held, cordless system. Commercially available butane gas canisters areused as the source of energy. The dispense quantity and timing are manually controlled with the ergonomic trigger mechanism.Features:• Well balanced and ergonomically designedfor operator comfort and application control• Low actuation force to reduce finger fatigue• Regulated temperature control for consistent heating• Gas powered for portability and versatilityTheory of OperationThe dispense quantity andtiming are manually controlledwith the trigger mechanism.NEWTECHNICAL SPECIFICATIONSRequired Utilities (Fuel)Braun, Calibri, Ronson, Rowenta, or otherhigh quality cigarette lighter fluidsNominal Stick Diameter1 ⁄2" Superstick Size2" W x 8" L x 7.5" HWeight0.7 lbs.Dispense PowerManualWarm-Up Time4 to 7 minutesDispense Melt Rateup to 3 lbs./hourDispense Temperature 195°CHot Melt ChemistryEVA and Polyolefin hot melt sticksParts Included(1) Hysol 050-GAS Hot Melt Applicator(1) Standard Nozzle (1) Plastic Stand (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.44For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITE ® HYSOL 050-LITEItem Number: 916281The Loctite® Hysol 050-LITE Hot Melt Applicator is a hand held, electrically heated dispenser. The dispense quantity and timingare manually controlled with the ergonomic trigger mechanism. This applicator weighs less than a pound, and is ideal for hobby,craft and light duty industrial applications.Features:• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Completely enclosed heater housing for maximum safety• State-of-the-art, self-regulating heaterfor accuracy in temperature control• Electrically double insulatedfor additional safetyTheory of OperationThe dispense rate andtiming are manuallycontrolled with thetrigger mechanism.NEWTECHNICAL SPECIFICATIONSRequired Voltage100/240 VAC; 50/60 HzUtilities Power400 W heat up, 45 W operating, 20 W restNominal Stick Diameter1 ⁄2" Superstick Size1.5" W x 8" L x 6.5" HWeight0.8 lbs.Dispense PowerManualPower Cord Length 6.5 feet (78")Maximum Extension Cord65 feetWarm-Up Time5 to 7 minutesDispense Melt Rate1.5 lbs./hourDispense Temperature 204°CHot Melt ChemistryEVA and Polyolefin hot melt sticksParts Included(1) Hysol 050-LITE Hot Melt Applicator(1) Standard Nozzle (1) Wire Stand (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.DISPENSING Hand Held HotMelt Applicators3⁄ 4 INCH MAXISTICK DISPENSERSLOCTITE ® HYSOL 075 / 075-LTItem Numbers: 98033 and 98034The Loctite® Hysol 075 and 075 -LT (for CoolMelt) are industrial grade, hand held, hot melt applicators. Electrically heated, bothunits are lightweight and easy to use. The Loctite® Hysol 075 features a market leading dispense rate while both units offer extralarge adhesive loading capacity. The dispense quantity and timing are manually controlled with the ergonomic trigger mechanism.Features:• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Full-hand trigger for minimized operator fatigue• Completely enclosed heater housing for maximum safety• Fast heat up time for virtually immediate use• Highest output, hand held dispenser in its class• Fixed precision thermostat temperature controlfor consistent heating• Thermal fuse protection for additional safety• Multiple stick loading with a detachabletop-mounted speed loader (included)Theory of OperationThe dispense rate and timing aremanually controlled with the triggermechanism. A high adhesivedispense rate, a large adhesiveloading capacity and easeof application are thetrademarks ofthis applicator.TECHNICAL SPECIFICATIONSPRODUCT Loctite ® Hysol 075 Loctite ® Hysol 075-LTItem Numbers 98033 98034Required Voltage120 VAC; 60 Hz; 120V; 3.3 amp single phaseUtilities Power400 wattsNominal Stick Diameter3⁄4" Maxistick Size1.94" W x 12.5" L x 8.25" HWeight1.9 lbs.Power Cord Length 6.5 feet (78")Maximum Extension Cord65 feetWarm-Up Time5 minutesDispense PowerManualDispense Melt Rate 9 lbs./hour 9 lbs./hourDispense Temperature 182°C 121°CApplicator Adhesive Capacity0.12 lbs.Wire Cross-Section16 a.w.g. minimumHot Melt ChemistryEVA hot melt sticksLoctite ® Hysol ® CoolMelt EVA hot melt sticksParts Included (1) Hysol 075 or 075-LT Applicator (1) Speed Loader(1) Plastic Dispenser Stand (1) Standard Nozzle(2) Stand-Off Wings (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.For additional information and the full line of equipment, visit www.equipment.loctite.com.45

DISPENSINGHand Held HotMelt Applicators1 3 ⁄ 4 INCH SPRAYPAC ® AND POLYSHOT APPLICATORSLOCTITE ® HYSOL 175-AIR / 175-AIR-HTPNEUMATIC APPLICATORSItem Numbers: 98036 and 98040The Loctite® Hysol 175-AIR and 175-AIR-HT (High Temperature forPolyamides) are industrial grade, electrically heated, hand heldpneumatic hot melt applicators. These high capacity dispensers arerugged and designed for heavy duty work. The dispense quantity andtiming are pneumatically controlled with the ergonomic triggermechanism, greatly minimizing operator fatigue.Features:• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Pneumatically powered actuation to reduce operator fatigue• High melt rate for maximum output• Completely enclosed heater housing for maximum safety• Fixed precision thermostat temperaturecontrol for consistent heatingTheory of OperationThe dispense rate is controlled bythe air pressure, and thetiming is controlled by thetrigger mechanism.Pneumatically powereddispensing reducesoperator fatigue.TECHNICAL SPECIFICATIONSPRODUCT Loctite ® Hysol 175-AIR Loctite ® Hysol 175-AIR-HTItem Numbers 98036 98040Voltage110/120 VAC; 50/60 HzRequiredUtilitiesPower500 wattsAir Input45 to 100 psiNominal Stick Diameter1 3 ⁄4" Polyshot Size2.6" W x 12.1" L x 9.5" HWeight3.89 lbs.Power Cord Length 10 feet (120")Maximum Extension Cord65 feetWarm-Up Time10 minutesDispense PowerElectricDispense Melt Rate8.8 lbs./hourDispense Temperature 195°C 215°CApplicator Adhesive Capacity0.125 lbs.Wire Cross-Section16 a.w.g. minimumHot Melt Chemistry EVA hot melt sticks Polyamide hot melts sticksParts Included(1) Hysol 175-AIR or Hysol 175-AIR-HT Applicator(1) Plastic Stand (1) Valve Body Air Line Adapter(1) Standard Nozzle (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.Additional Accessories Sold Separately98042 –Loctite ® HotMelt BenchMount Kit98043 – Loctite ® HotMelt Pneumatic Timer985397 –Loctite ® AirLine Filter,Regulator, GaugeLOCTITE ® HYSOL 175-SPRAY / 175-SPRAY-HT PNEUMATIC APPLICATORSItem Numbers: 98037 and 98041The Loctite® Hysol 175-SPRAY and 175-SPRAY-HT (HighTemperature for Polyamides) are industrial grade, electricallyheated, hand held, pneumatic hot melt applicators. Fine to coarsespray pattern control is possible with a simple air rate adjustmentknob. These high capacity dispensers are rugged and designed forheavy duty work. The dispense quantity and timing arepneumatically controlled with the ergonomic trigger mechanism,greatly minimizing operator fatigue.Features:• Adjustable flow control for tailoring the spray pattern• Patented spray technology for small or large spray pattern• Automatic end-of-cycle purge to prevent nozzle clogging• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Pneumatically powered actuation to reduce operator fatigue• High melt rate for maximum output• Completely enclosed heater housing for maximum safety• Fixed precision thermostat temperature controlfor consistent heatingTheory of OperationBy using the air flow control, the spraypattern can be varied from a narrow toa wide spiral pattern. The dispenserate is controlled by the airpressure, and the timing iscontrolled with the triggermechanism. Pneumaticallypowered dispensingreduces operator fatigue.TECHNICAL SPECIFICATIONSPRODUCT Hysol 175-SPRAY Hysol 175-SPRAY-HTItem Numbers 98037 98041Voltage110/120 VA; 50/60 HzRequiredUtilitiesPower500 wattsAir Input45 to 100 psiSpray PatternUltra-wide spray nozzle: 1.5" minimum / 6" maximumStandard medium spray nozzle: 1.25" minimum / 5" maximumNarrow spray nozzle: 0.5" minimum / 1.25" maximumNominal Stick Diameter1 3 ⁄4" SprayPac ® SticksSize2.6" W x 12.1" L x 9.5" HWeight4 lbs.Power Cord Length 10 feet (120")Maximum Extension Cord65 feetWarm-Up Time10 minutesDispense PowerElectricDispense Melt Rate8 lbs./hourDispense Temperature 195°C 215°CApplicator Adhesive Capacity0.125 lbs.Wire Cross-Section16 a.w.g. minimumHot Melt Chemistry EVA Spray hot melt sticks Polyamide Spray hot melt sticksParts Included(1) Hysol 175-SPRAY or Hysol 175-SPRAY-HT Applicator(1) Plastic Stand (1) Valve Body Air Line Adapter(1) Manual (1) Standard Wide Spray NozzleAdditional Information For Hot Melt Nozzles and Accessories, see page 49.Additional Accessories Sold Separately985397 – Loctite ® Air Line Filter, Regulator, Gauge46For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITEHeading ® HYSOL 175 MANUAL APPLICATOR– Epoxy & Urethane AdhesivesItem Number: 98035The Loctite® Hysol 175 is an industrial grade, electrically heated, hand held, manual hot melt applicator. This unit comes with twoplug-in thermostats for either EVA or polyamide adhesives. The dispense quantity and timing are manually controlled with theergonomic trigger mechanism.Features:The complete source on Loctite® brand adhesives,• Includes two plug-in modules for dispensing bothsealants,polyamidelubricants,and EVAcoatings,hot meltsdispensing and curingequipment • Lightweight, available well balanced, only from and ergonomicallyHenkel Corporation.designed for operator comfort and application control• Completely enclosed heater housing for maximum safety• Fast heat up time for virtually immediate use• Advanced electronic controller provides power saving mode,when not in use for long periods of time• Fixed precision thermostat (plug-in module)for consistent heating• Thermal fuse protectionfor additional safetyTheory of OperationThe dispense rate andtiming are manuallycontrolled with thetrigger mechanism.TECHNICAL SPECIFICATIONSRequired Voltage110/120 VAC; 50/60 HzUtilities Power400 wattsNominal Stick Diameter1.75" Polyshot SticksSize2.67" W x 12.25" L x 9.63" HWeight2.65 lbs.Power Cord Length 10 feet (120")Maximum Extension Cord65 feetWarm-Up Time5 to 7 minutesDispense PowerManualDispense Melt Rate6.6 lbs./hourDispense Temperature 195°C or 215°CApplicator Adhesive Capacity0.125 lbs.Wire Cross-Section16 a.w.g. minimumHot Melt ChemistryEVA and polyamide hot melt sticksParts Included (1) Hysol 175 Applicator (1) Plug-In Module (215°C)(1) Plastic Stand (1) Standard Nozzle(1) Plug-In Module (195°C) (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.DISPENSING Hand Held HotMelt ApplicatorsURETHANE DISPENSERLOCTITE ® HYSOL REACTIVE URETHANE CARTRIDGE DISPENSERItem Number: 98011The Loctite® Hysol Reactive Urethane Cartridge Dispenser is used to dispense reactive polyurethane hot melts from 300 mlcartridges. This electrically heated, pneumatic dispenser includes a pressure-regulating stand with optional vertical applicationstand and foot switch for hands-free application. To minimizecartridge change-over times, the Loctite® Cartridge Pre-Heater(item 98012) is recommended.RequiredFeatures:UtilitiesVoltagePowerTECHNICAL SPECIFICATIONS120 VAC; 60 Hz; single phase400 watts• Lightweight, well balanced, and ergonomicallydesigned for operator comfort and application control• Low actuation force to reduce finger fatigue• Electronic temperature control• Rugged molded thermoset plastic housing for“cool to the touch” operation up to 250°F• Fixed precision temperature: 250°F (121°C)• Single cartridge loading• Direct nozzle cartridge mounting forquick cartridge changeover• Various nozzles for different dispense patternsTheory of OperationThis unit is used in the manualmode, where the operatormanually begins andterminates the pneumaticdispense cycle by a handtrigger. Flow control isachieved by adjusting theregulator supplied on thebase of the unit.Air Input80 psi air, filtered to 40 micronSize3.1" W x 12.5" L x 10.3" HWeight3 lbs.AdhesiveDispenses 300 cc aluminum cartridgeAir OutputMaximum 90 psiWarm-Up Time7 to 10 minutesDispense PowerAirDispense Melt Rate3.5 lbs./hourDispense Temperature 121°CApplicator AdhesiveCapacity0.125 lbs.Hot Melt ChemistryLoctite ® Hysol ® Reactive Urethane hot meltsParts Included(1) Hysol Reactive Urethane Cartridge Dispenser(1) Base with Regulator and Gauge (1) Wire Stand(1) 300 cc Cartridge Adapter (1) Nozzle with Cap(1) Heat Resistant Gloves (1) Cartridge Piercer(1) Tubing Assembly (1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.Additional Accessories Sold Separately98012 – Loctite ® Cartridge Pre-HeaterFor additional information and the full line of equipment, visit www.equipment.loctite.com.47

Hand Held HotMelt ApplicatorsDISPENSINGHOT MELT BENCH MOUNT AND CONTROLLER OPTIONSLOCTITE ® HOT MELT BENCH MOUNT KITItem Number: 98042LOCTITE ® HOT MELT PNEUMATIC TIMERItem Number: 98043The Loctite® Hot Melt Bench Mount Kit is used for converting theLoctite® Hysol 175-AIR or 175-AIR-HT applicator into a hands-free,bench-top dispenser. The Loctite® Hot Melt Pneumatic Timer is used inconjunction with the Loctite® Hot Melt Bench Mount Kit and Loctite®Hysol 175-AIR and 175-AIR-HT applicator for “controlled” dotdispensing. These units are used for any hot melt application whereholding an applicator is not desirable. This is especially relevant toapplications where the part itself must be moved. Typical applicationsinclude: cardboard boxes and related packaging materials, wood andplastic panels, furniture components, etc.Features:Loctite® Hot Melt Bench Mount Kit• Ready-made bench-top stand easily attaches to theLoctite® Hysol 175-AIR or 175-AIR-HT applicator,and includes a pneumatic actuator and foot switch• Included right angle adapter accepts anyLoctite® brand hot melt nozzleLoctite® Hot Melt Pneumatic Timer• Directly accepts the Loctite® Hot Melt Bench Mount Kit• Programmable timer from 0 to 1 secondfor controlled dot dispensing• Internal pneumatic timing device requiresno electrical connection• Includes a manual mode for set-up and purgingTheory of OperationBy simply pushing the included foot switch, an operator candispense beads or dots of hot melt adhesives onto a partwithout the hindrance of holding the applicator. By usingthe preset timer, each push of the foot switch will dispensea single controlled dot of adhesive.98042 – Loctite ® Hot MeltBench Mount Kit.PRODUCTTECHNICAL SPECIFICATIONSLoctite ® Hot Melt BenchMount Kit98043 – Loctite ® HotMelt Pneumatic Timer.Loctite ® Hot MeltPneumatic TimerItem Number 98042 * 98043Required UtilitiesAir Input: 60 to 100 psiSize 7.8" W x 11.9" Depth x 16.4" H 7.4" W x 7.8" L x 2.75" HWeight 5.4 lbs. 2.6 lbs.Hot Melt ChemistryEVA/PolyamideParts Included (1) Stand with Pneumatic Actuator(1) Right Angle Adapter for Nozzle(1) Foot Switch(1) Manual(1) Pneumatic Timer(1) ManualAdditional Information For Hot Melt Nozzles and Accessories, see page 49.* Note: Applicators are sold separately.48For additional information and the full line of equipment, visit www.equipment.loctite.com.

Loctite® Brand Hot Melt Nozzles and AccessoriesPRODUCTItemNumber988107(Single pack)419115(Single pack)98687(5 pack)ANZ023N01988108(5 pack)985225(5 pack)916050985110985111985112985113985114DescriptionAdapter/Check Valvesfor NozzlesStandard Nozzle Adapter withCheck Valve and Jam Nut1-Hole Nozzle0.08" Diameter Cone Tip (5 pack)1-Hole Nozzle 0.09" DiameterCone Tip2-Hole Nozzle0.06" diameter x 0.39" spacing3-Hole Nozzle0.06" diameter x 0.20" spacingDiagonal Extension NozzleTip = 0.14" diameter x 1.23" longNeedle Extension NozzleTip = 0.05" diameter x1.32" longSpreader Extension NozzleTip = (0.09" x 0.25") sq. x1.32" longUsed With98544, 9854598030, 98031, 98032,98035, 98036, 9804091628298033, 9803498544, 9854598030, 98031, 98032,98033, 98034, 98035,98036, 9804091628298030, 98031,98032, 98033, 98034,98035, 98036, 98040,98544, 9854598030, 98031,98032, 98033, 98034,98035, 98036, 98040,98544, 9854598030, 98031,98032, 98033, 98034,98035, 98036, 98040,98544, 9854598030, 98031,98032, 98033, 98034,98035, 98036, 98040,98544, 9854598030, 98031,98032, 98033, 98034,98035, 98036, 98040,98544, 98545PRODUCTItemNumber98012984261984262984263984264984265984266DescriptionCartridge Pre-HeaterHolds (2) 300 ml cartridgesStandard Adapter for300 ml CartridgesStandard 1-Hole Nozzle0.098" diameter cone tip, withintegral check valve(Includes protective cap)Adapter/Check Valve forSpecialty NozzlesNeedle Jet NozzleTip = 0.051" diameter x 1.26" long(Requires 984263 adapter)Diagonal Extension NozzleTip = 0.123" diameter x 1.276" long(Requires 984263 adapter)Flat Spreader NozzleTip = (0.084" x .177") sq. x1.237 long(Requires 984263 adapter)Used With98011980119801198011980119801198011DISPENSING Hand Held HotMelt Applicators985115985116985122L-Nozzle0.06" diameter x 0.85" offsetT-Nozzle0.06" diameter x 1.5" spacingStandard Medium Spray Nozzle1.25" to 5" diameter pattern98033, 98034,98035, 98036, 98040,98544, 9854598033, 98034,98035, 98036, 98040,98544, 9854598037, 980419842679842682-Hole Nozzle0.06" diameter x 0.39" spacing(Requires 984263 adapter)3-Hole Nozzle0.06" diameter x 0.20" spacing(Requires 984263 adapter)9801198011985211985216Narrow Spray Nozzle0.05" to 1.25" diameter patternUltra Wide Spray Nozzle1.5" to 6.0" diameter pattern98037, 9804198037, 98041984272Injection Needle Nozzle withIntegral Check ValveTip = 0.059" diameter x0.197" long98011984999985001985002Standard 1-Hole Nozzle withIntegral Check ValveTip = 0.10" diameter x 0.16" longSpreader Nozzle withIntegral Check ValveTip = (0.08" x 0.25") sq. x0.47" longPencil Point Nozzlewith Integral Check ValveTip = 0.08" diameter x 0.24" long98029, 91628198029, 91628198029, 916281985087985243Heavy Duty Metal Stand for BenchTop or Wall MountingTool Hanger/Balancer –0 to 1.5 kg98030, 98031, 98032,98035, 98036, 98037,98040, 98041All Hot MeltApplicators985003985004Precision Nozzle withIntegral Check ValveTip = 0.05" diameter x 0.20" longExtension Nozzle withIntegral Check ValveTip = 0.10" diameter x 0.50" long98029, 91628198029, 916281985397Air Line Filter, RegulatorGauge 0 to 150 psiAll PneumaticApplicators985005Silicone Rubber Safety Cap (2 pack)(for use with 984999, 985002,98500498029, 916281For custom hot melt dispense nozzles, contact the SpecialEquipment Group of Henkel at 1-800-LOCTITE (562-8483).For additional information and the full line of equipment, visit www.equipment.loctite.com.49

DISPENSINGBulk Hot Melt SystemsBulk Hot MeltSystemsHenkel’s Loctite® Hysol bulk hot melt systems offer high performance control and reliability for all of yourhot melt dispensing needs. You can rely on Henkel to supply you with performance hot melt adhesives as wellas an array of standard high volume hot melt dispensing equipment. Henkel offers true one stop shopping foryour complete adhesive solution. These systems are rugged, compact and feature internal system diagnosticswhich monitor the temperatures and system settings.Loctite® Hysol bulk hot melt systems accommodate all sizes of Loctite® Hysol® EVA,polyamide and polyolefin hot melt adhesives and share these performance features:• PTFE coated reservoir reduces tank residue• High surface area melt grid is integrated withtank walls to ensure fast and even heating,eliminating “hot spots” within the tank• All systems are CE certified• All system settings and system diagnosticsare visible on front display for “at a glance”system status• Gear pump for the most consistentproduct delivery pressureBulk SystemsPRODUCTLoctite ® Hysol PURHot Melt DispenserItemNumberMaximumLength ofHosesVoltageAmpsMaximumNumber ofHosesMaximumDispenseRate1012854 24 feet 230 VAC 1 195 lbs./hr.MaximumDispenseTemperature425°F(218°C)MaximumTank SettingTemperature395°F(202°C)Used toDispenseReactivePolyurethaneHot Meltsfrom 5gallon pailsLoctite ® Hysol Bulk-12 System98131 16 feet 115 VAC 151 12 lbs./hr.410°F(218°C)395°F(202°C)EVA,Polyamide,Polyolefin98132 24 feet 230 VAC 13Loctite ® Hysol Bulk-14 System98133 32 feet 115 VAC 2098134 48 feet 230 VAC 182 28 lbs./hr.425°F(218°C)395°F(202°C)EVA,Polyamide,PolyolefinLoctite ® Hysol Bulk-34 System98135 72 feet 230 VAC 28 4 75 lbs./hr.425°F(218°C)395°F(202°C)EVA,Polyamide,Polyolefin50For additional information and the full line of equipment, visit www.equipment.loctite.com.

DISPENSING Bulk Hot MeltSystemsLOCTITE ® HYSOL PUR HOT MELT DISPENSERItem Number: 1012854The Loctite® Hysol PUR Hot Melt dispenser is designed to effectivelypump and apply reactive polyurethane hot melt adhesives directly from5 gallon pails. This dispenser utilizes an innovative inflatable siliconeseal design to insure moisture is kept separated from the reactive PURHot Melt. Product is dispensed using a rugged gear pump design, andwith 3 separate heating zones (platen, hose, and applicator) to insurelong term reliable dispensing.Features:• Fully enclosed pail unloading station with a rugged silicone sealdesigned to keep moisture out, and an elevator platform to ensurecontinuous seal/hot melt contact as the pail is emptied• 3 zone heating with convenient digital control panel withcomponent on/off LED displays and digital temperature read-outs• Inflatable silicone pail seal design ensures reactive moistureis kept out of a 5 gallon pail during operation• 3 zone heating controls, pail platen, hose, and applicatorwith no check valves to repair or replace• Can be used on any standard hot melt adhesivein a 5 gallon pailUtilitiesTheory of OperationA 5 gallon pail of PUR Hot Melt is positioned onto the elevatorplatform and raised to engage an inflatable silicone seal intothe pail. The platen is heated to the desired temperature andmelts the product which then flows towards the center of theplaten. As the elevator maintains pressure on the pail, theliquefied product is channeled towards the gear pump aroundthe bottom center of the platen. Utilizing the control panel,a temperature range is selected that is within the product’s usetemperature. Once the application temperature is reached, theequipment is ready to dispense product. When the applicatortrigger is actuated, the gear pump turns on and forces theproduct down the heated hose and towards the dispenseapplicator. Gear pump speed can also be controlledto change the application rate.DimensionsWeightDispense RateUsed to DispensePackages TypesTECHNICAL SPECIFICATIONSElectric: 230 VAC; Single Phase, 30 amp maximumPneumatic: 65 to 90 psi52.5" H x 30" W x 22" D375 lbs.Up to 195 lbs./hourReactive Polyurethane Hot Melts5 gallon pailsParts Included (1) Loctite ® PUR Hot Melt 5 Gallon Pail Pump –Complete System(1) 8' Heated HoseAdditional InformationSee pages 55-57 to select from the wide assortmentof applicators, hoses, nozzles, timers, controllers andaccessories to complete your PUR hot melt dispense system.46For additional information and the full line of equipment, visit www.equipment.loctite.com.51

Bulk Hot MeltSystemsDISPENSINGLOCTITE ® HYSOL BULK-12 SYSTEMItem Numbers: 98131 and 98132The Loctite® Hysol Bulk-12 Hot Melt System is a compact andefficient bulk hot melt unit capable of manual or automaticproduct delivered up to 12 lbs./hr. The unit includes analogcontrols with simple modular connections for hoses,controllers and timers that are sold separately. These CEcertified units have three independent temperature controlsfor the tank, hosing and dispense valves that will provide aneffective extrusion or spray application for a wide rangeof hot melt adhesives.Features:• Adjustable pressure, all electric AC gear pump• Three controllable temperature zones over six finetuned ranges up to 410°F (210°C)• PTFE coated reservoir with high surface area melt grid• Internal system diagnostics automatically troubleshootelectrical connections and eliminate overheating• Simple analog controls with high visibilityLED indicator lamps for temperature rangeand diagnostic status• Simple modular connections for hoses, controllers,timers and other optional interfaces• CE Certified• Compact footprintTheory of OperationThis unit is designed to melt and dispense hot meltadhesive when outfitted with optional hand held ormountable applicators, for either spray or extrusionapplications. Appropriate dispense controllers, timers,hosing and nozzle accessories are also selectedbased on process needs to complete the system.TECHNICAL SPECIFICATIONSItem Number 98131 98132Voltage 115 VAC 230 VACStandard Tank Capacity12 lbs. (5.4 kg)Used to DispenseAll forms of Loctite ® Hysol ® EVA,Polyamide, PolyolefinMaximum Dispense Rate12 lbs./hr. (5.4 kg/hr.)Maximum Temperature Tank Setting395°F (202°C)Maximum Dispense Temperature410°F (210°C)Temperature Control Zones 3ControlsAnalogMaximum Number of Hoses 1Maximum Total Length of Hoses 16 feet 24 feetAvailable Dispense PatternsExtrude, Swirl Spray, Fan Spray, Cone SprayPump Pressure0 to 300 psiDimensions (Lid Open)15.9" L x 10.5" W x 20.0" HWeight (Empty)41 lbs. (18.6 kg)System Power Consumption 1700 watts 2780 wattsMelt Tank Power Consumption 900 watts 1700 wattsParts Included(1) Hysol Bulk-12 Hot Melt System(1) Temperature Range Adjustment Tool(1) 10 mm Hex Key for flow by-pass adjustment(1) ManualAdditional InformationSee pages 55-57 to select from the wideassortment of applicators, hoses, nozzles,timers, controllers and accessories to completeyour bulk hot melt dispense system.52For additional information and the full line of equipment, visit www.equipment.loctite.com.

DISPENSING Bulk Hot MeltSystemsLOCTITE ® HYSOL BULK-14 SYSTEMItem Numbers: 98133 and 98134The Loctite® Hysol Bulk-14 Hot Melt System is a compact andefficient bulk hot melt unit capable of manual or automaticproduct delivered up to 28 lbs./hr. The unit includes all digitalcontrols and displays with simple modular connections forhoses, controllers and timers that are sold separately. These CEcertified units have three independent temperature controlsfor the tank, hosing and dispense valves that will provide aneffective extrusion or spray application for a wide rangeof hot melt adhesives.Features:• Two-channel controls on front panel with full digitaldisplay of set points, temperature ranges, and alldiagnostic functions• Highly reliable variable speed DC gear pump withintegrated flow control offers consistent productdelivery and extended service life• Capable of two, independent andfully customizable dispense lines• Up to five controllable temperature zones over sixindividual ranges for fine tuned temperature control• User selectable standby mode automatically protectsagainst overheating product. This extends product life,lowers energy consumption, and still allows for rapidrestart of the unit• PTFE coated reservoir with high surface area melt grid• CE Certified• Compact footprintTheory of OperationThis unit is designed to melt and dispense hot meltadhesive when outfitted with optional hand held ormountable applicators, for either spray or extrusionapplications. Appropriate dispense controllers, timers,hosing and nozzle accessories are also selectedbased on process needs to complete the system.TECHNICAL SPECIFICATIONSItem Number 98133 98134Voltage 115 VAC 230 VACStandard Tank Capacity14 lbs. (6.4 kg)Optional Tank Feed Hopper70 lbs. (31.75 kg)Used to DispenseAll forms of Loctite ® Hysol ® EVA,Polyamide, PolyolefinMaximum Dispense Rate28 lbs./hr. (12.7 kg/hr.)Maximum Temperature Tank Setting395°F (202°C)Maximum Dispense Temperature425°F (218°C)Temperature Control Zones 5ControlsDigitalMaximum Number of Hoses 2Maximum Total Length of Hoses 20 feet 48 feetAvailable Dispense PatternsExtrude, Swirl Spray, Fan Spray, Cone SprayPump Pressure0 to 300 psiDimensions (Lid Open)20.2" L x 11.5" W x 22.5" HWeight (Empty)51 lbs. (23.2 kg)System Power Consumption 2220 watts 3860 wattsMelt Tank Power Consumption 900 watts 1700 wattsParts Included(1) Hysol Bulk-14 Hot Melt System(1) Temperature Range Adjustment Tool(1) 10 mm Hex Key for flow by-pass adjustment(1) ManualAdditional InformationSee pages 55-57 to select from the wideassortment of applicators, hoses, nozzles,timers, controllers and accessories to completeyour bulk hot melt dispense system.For additional information and the full line of equipment, visit www.equipment.loctite.com.53

Bulk Hot MeltSystemsDISPENSINGLOCTITE ® HYSOL BULK-34 SYSTEMItem Number: 98135The Loctite® Hysol Bulk-34 Hot Melt System is a compact andefficient bulk hot melt unit capable of manual or automaticproduct delivered up to 75 lbs./hr. The unit includes all digitalcontrols and displays with simple modular connections forhoses, controllers and timers that are sold separately. These CEcertified units have three independent temperature controlsfor the tank, hosing and dispense valves that will provide aneffective extrusion or spray application for a wide rangeof hot melt adhesives.Features:• Two-channel controls on front panel withfull digital display of set points, temperature rangesand all diagnostic functions• Highly reliable variable speed DC gear pump withintegrated flow control offers consistent productdelivery and extended service life• Capable of up to four, independent and fullycustomizable dispense lines• Up to nine controllable temperature zones over sixindividual ranges for fine tuned temperature control• User selectable standby mode automatically protectsagainst overheating product. This extends product life,lowers energy consumption, and still allows for rapidrestart of the unit• PTFE coated reservoir with high surface area melt grid• CE Certified• Compact footprintTheory of OperationThis unit is designed to melt and dispense hot meltadhesive when outfitted with optional hand held ormountable applicators, for either spray or extrusionapplications. Appropriate dispense controllers, timers,hosing and nozzle accessories are also selected basedon process needs to complete the system.TECHNICAL SPECIFICATIONSVoltage230 VACStandard Tank Capacity34 lbs. (15.4 kg)Optional Tank Feed Hopper100 lbs. (45.4 kg)Used to DispenseAll forms of Loctite ® Hysol ® EVA,Polyamide, PolyolefinMaximum Dispense Rate75 lbs./hr (34.1 kg/hr.)Maximum Temperature Tank Setting395°F (202°C)Maximum Dispense Temperature425°F (218°C)Temperature Control Zones 9ControlsDigitalMaximum Number of Hoses 4Maximum Total Length of Hoses72 feetAvailable Dispense PatternsExtrude, Swirl Spray, Fan Spray, Cone SprayPump Pressure0 to 300 psiDimensions (Lid Open)22.0" L x 14.5" W x 27.0" HWeight (Empty)86 lbs. (39.0 kg)System Power Consumption6600 wattsMelt Tank Power Consumption3400 wattsParts Included(1) Hysol Bulk-34 Hot Melt System(1) Temperature Range Adjustment Tool(1) 10 mm Hex Key for flow by-pass adjustment(1) ManualAdditional InformationSee pages 55-57 to select from the wideassortment of applicators, hoses, nozzles,timers, controllers and accessories to completeyour bulk hot melt dispense system.54For additional information and the full line of equipment, visit www.equipment.loctite.com.

Loctite® Hysol Bulk Hot Melt System ApplicatorsIn any adhesive application, the accuracy of your dispense equipment can define the level of success of the process.Henkel offers four accurate and convenient styles of dispense applicators to suit any process requirement. Whicheverdispense applicator you choose, it must match the voltage of the melt unit. The 2 hand and mounted styles also come inmultiple coil voltages (24 VDC, 115 VAC, and 230 VAC) to match external control systems if employed.1) Loctite ® Hysol Hand Held Applicator• Convenient, durable, fully insulated, and customizable• Available in top or bottom inlet applicators2) Loctite ® Hysol Mounted Applicator (for automatic or fixed position dispense)• Excellent design for automated applications• Select electrically controlled mounted applicators for dispensing products up to 5,000 cP• Select pneumatically controlled mounted applicators for high cycle rates up to 2,400 cpm• Compact design is easily mounted to a robot or incorporated into a workcell or fixture3) Loctite ® Hysol 2 Hand Applicator• Electrically controlled for precision dispense• Vertical design allows direct positioning over the partDISPENSING Bulk Hot MeltSystemsPRODUCTItem NumberCompatible withthese Melt UnitsMelt Unit VoltageControl CoilVoltage/Item #Loctite ® Hysol Hand Held Bottom InletApplicator98138 98131, 98133 115 VAC N/A98139 98132, 98134, 98135 230 VAC N/ALoctite ® Hysol Hand Held Top InletApplicator98136 98131, 98133 115 VAC N/A98137 98132, 98134, 98135 230 VAC N/A98146 98131, 98133 115 VAC 24 VDC**Loctite ® Hysol Mounted Applicator(Electric – Open/Close)98147 98131, 98133 115 VAC 115 VAC98145 98132, 98134, 98135 230 VAC 24 VDC**98149 98132, 98134, 98135 230 VAC 115 VAC98148 98132, 98134, 98135 230 VAC 230 VAC24 VDC **/986326 †989357 98131, 98133 115 VAC115 VAC/989358 †Loctite ® Hysol Mounted Applicator(Pneumatic – Open/Close)230 VAC/989359 †24 VDC **/986326 †986325 98132, 98134, 98135 230 VAC115 VAC/989358 †230 VAC/989359 †98143 98131, 98133 115 VAC 24 VDC **Loctite ® Hysol 2 Hand Applicator*98140 98131, 98133 115 VAC 115 VAC98144 98132, 98134, 98135 230 VAC 24 VDC**98142 98132, 98134, 98135 230 VAC 115 VAC98141 98132, 98134, 98135 230 VAC 230 VAC*All of the Loctite ® Hysol 2 Hand Applicators require a separateapplicator control cord and either an extrude or spray controlmodule. Select between single switch (only requires onehand to actuate) or two switch (requires two hands to actuate)to control the unit.986884 2 Hand Applicator Cord, 1 Switch986885 2 Hand Applicator Cord, 2 Switch** Choose 24 VDC for use with Event Timers.† Solenoid Valve is required and sold separately.For additional information and the full line of equipment, visit www.equipment.loctite.com.55

DISPENSINGLoctite® Brand Extrusion HosesChoose between 115 and 230 VAC to match your melt unit, then select the required length of hose.4 feet 6 feet 8 feet 10 feet 12 feet 16 feet 18 feet 24 feet Voltage986337 986339 986341 986343 986345 2 986347 2 986349 1/2 986351 1/2 115 VACBulk Hot MeltSystems986338 986340 986342 986344 986346 986348 986350 986352 230 VAC1 Not available for Loctite ® Hysol Bulk-12 115 VAC System (98131).2 Not available for Loctite ® Hysol Bulk-14, 115 VAC when using dual hoses.Loctite® Brand Extrusion ControllersFor 2 Hand Applicator only. This unit allows the integration of the melt tank pump function and 2 Hand Applicatoractivation in a single control unit. Choose from 115 and 230 VAC to match your melt unit.Item NumberVoltage986886 115 VAC987525 230 VACLoctite® Brand Spray HosesChoose between 115 and 230 VAC to match your melt unit, then select the required length of hose.4 feet 6 feet 8 feet 10 feet 12 feet 16 feet 18 feet 24 feet Voltage986353 986355 986357 986359 986361 2 986363 2 986365 1/2 986367 1/2 115 VAC986354 986356 986358 986360 986362 986364 986366 986368 230 VAC1 Not available for Loctite ® Hysol Bulk-12 115 VAC System (98131).2 Not available for Bulk-14, 115 VAC when using dual hoses.Loctite® Brand Spray ControllersLoctite® Hysol Spray Controllers utilize the latest inmicroprocessor technology to handle a multitude ofadhesive patterns. A controller and appropriate nozzle arerequired for spray or swirl dispensing. See page 57 for acomplete line of bulk hot melt system nozzles andaccessories to meet all your dispensing requirements.Loctite ® Hysol Spray ControllerItem NumberVoltage98161 115 VACTimersLoctite® Hysol Timers provide timed dispense control forall Loctite® Hysol automatic bulk hot melt systems. Timerscan be used in either 115 or 230 VAC systems. The Loctite®Hysol Two and Four Event Timers contain independentlyselectable output channels that control 24 VDC or AC line voltageapplicators. They feature separate high and low speed ranges tocontrol delay and length of pattern. The Four Event Timer hasan added “stitch” mode pattern application. These modular unitscan be used with foot switch, proximity or optical sensors.Loctite ® Hysol Two Event TimerLoctite ® Hysol Four Event Timer98162 † 230 VAC9815898159Loctite ® Hysol 2 Hand Applicator Spray ControllerItem NumberVoltage986887 115 VAC987526 † 230 VAC† If used with Bulk-34 System additional cable, Item Number 1053256 isalso required and sold separately.Loctite ® Brand Timer and External Interface CordsPRODUCTLoctite ® Hysol Bulk-12 SystemLoctite ® Hysol Bulk-14 SystemLoctite ® Hysol Bulk-34 SystemTwo or With 24 VDC Output 1 986890 986743 2 986747 2Four EventTimer With Line Voltage Output 986744 986745 986746External PLC Interface Cords 986891 987835 9868921 If multiple applicators are required, use either line voltage applicators orpneumatic applicators only.2 Can not be used with multiple 24 VDC electric valves (Items 98143, 98144,98145 or 98146).56For additional information and the full line of equipment, visit www.equipment.loctite.com.

Loctite® Brand Bulk Hot Melt System Nozzles and AccessoriesHeading – Epoxy & Urethane AdhesivesPRODUCT Item Number DescriptionPRODUCT Item Number Description986634 Bulk-14 Hopper Upgrade to 40 lb. Capacity986723 Proximity Sensor Assembly986724 Optical Sensor Assembly986635 Bulk-34 Hopper Upgrade to 78 lb. Capacity986725 Sensor Cord Extension, 10 Feet986636 Bulk Units Floor Stand98160 Foot Switch Assembly984363 Bulk-12 Applicator Hanger Arm Kit986331 Valve Mount Bracket Kit984347 Bulk-14 and 34 Applicator Hanger Arm Kit986693 Feed Line Adapter, 45 Degrees986637 Hose Cradle986638 Tension Balancer986694 Feed Line Adapter, 90 Degrees986639 Hose Cradle and Tension BalancerDISPENSING Bulk Hot MeltSystemsPRODUCT Item Number Description986369 Extrusion Nozzle 1 ⁄2" – 0.020" Diameter986373 Extrusion Nozzle 1 ⁄2" – 0.030" Diameter986377 Extrusion Nozzle 1 ⁄2" – 0.040" Diameter986381 Extrusion Nozzle 1 ⁄2" – 0.050" Diameter986385 Extrusion Nozzle 1 ⁄2" – 0.060" Diameter986389 Extrusion Nozzle 1 ⁄2" – 0.070" Diameter986393 Extrusion Nozzle 1 ⁄2" – 0.080" Diameter986397 Extrusion Nozzle 1 ⁄2" – 0.090" Diameter986370 Extrusion Nozzle 1" – 0.020" Diameter986374 Extrusion Nozzle 1" – 0.030" Diameter986378 Extrusion Nozzle 1" – 0.040" Diameter986382 Extrusion Nozzle 1" – 0.050" Diameter986386 Extrusion Nozzle 1" – 0.060" Diameter986390 Extrusion Nozzle 1" – 0.070" Diameter986394 Extrusion Nozzle 1" – 0.080" Diameter986398 Extrusion Nozzle 1" – 0.090" Diameter986371 Extrusion Nozzle 2" – 0.020" Diameter986375 Extrusion Nozzle 2" – 0.030" Diameter986379 Extrusion Nozzle 2" – 0.040" Diameter986383 Extrusion Nozzle 2" – 0.050" Diameter986387 Extrusion Nozzle 2" – 0.060" Diameter986391 Extrusion Nozzle 2" – 0.070" Diameter986395 Extrusion Nozzle 2" – 0.080" Diameter986399 Extrusion Nozzle 2" – 0.090" Diameter986372 Extrusion Nozzle 3" – 0.020" Diameter986376 Extrusion Nozzle 3" – 0.030" Diameter986380 Extrusion Nozzle 3" – 0.040" Diameter986384 Extrusion Nozzle 3" – 0.050" Diameter986388 Extrusion Nozzle 3" – 0.060" Diameter986392 Extrusion Nozzle 3" – 0.070" Diameter986396 Extrusion Nozzle 3" – 0.080" Diameter986400 Extrusion Nozzle 3" – 0.090" Diameter986695 Extrusion Button Nozzle – 0.012" Diameter986696 Extrusion Button Nozzle – 0.015" Diameter986697 Extrusion Button Nozzle – 0.025" Diameter986698 Extrusion Button Nozzle – 0.030" Diameter986699 Extrusion Button Nozzle – 0.040" Diameter986700 Extrusion Button Nozzle – 0.050" Diameter986701 Extrusion Button Nozzle – 0.060" Diameter986702 Extrusion Button Nozzle – 0.070" Diameter986703 Extrusion Button Nozzle – 0.080" Diameter986704 Extrusion Button Nozzle – 0.090" DiameterPRODUCT Item Number Description986888 Swirl Nozzle Assembly – without Nozzle986803 Swirl Nozzle – 0.030" Diameter986804 Swirl Nozzle – 0.045" Diameter986805 Swirl Nozzle – 0.060" Diameter986806 Swirl Nozzle – 0.080" Diameter986889Spray Nozzle Assembly with Fan Air Cap –without nozzle987017Spray Nozzle Assembly with Cone Air Cap –without Nozzle986807 Spray Nozzle and O-ring – 0.020" Diameter986808 Spray Nozzle and O-ring – 0.030" Diameter986809 Spray Nozzle and O-ring – 0.040" Diameter986810 Spray Nozzle and O-ring – 0.050" Diameter986791 T-Bar Nozzle – 2" x 1"986792 T-Bar Nozzle – 2" x 2"986793 T-Bar Nozzle – 2" x 3"986797 Y-Bar Nozzle – 2" x 1"986798 Y-Bar Nozzle – 2" x 2"986799 Y-Bar Nozzle – 2" x 3"986783 Direction Nozzle – 0.010" Diameter (2 pack)986784 Direction Nozzle – 0.020" Diameter (2 pack)986785 Direction Nozzle – 0.030" Diameter (2 pack)986786 Direction Nozzle – 0.040" Diameter (2 pack)986736 Direction Nozzle Assembly – 0.010" Diameter (2 pack)986738 Direction Nozzle Assembly – 0.020" Diameter (2 pack)986740 Direction Nozzle Assembly – 0.030" Diameter (2 pack)986742 Direction Nozzle Assembly – 0.040" Diameter (2 pack)986730 Direction Nozzle Screw (5 pack)986727 Direction Nozzle O-Ring (10 pack)986733 Blank Screw Assembly (5 pack)For additional information and the full line of equipment, visit www.equipment.loctite.com.57

DISPENSINGHand Held ValvesHand Held ValvesLoctite® brand hand held dispensing valves are used where ergonomic design forhand dispensing of fluids is desired. Designed for use with Loctite® brand controllersand reservoirs, these hand held valves utilize passive wetted components for universalcompatibility with many fluids. Selection of a Loctite® brand hand held valve is basedon the desired dispensing controls, the dispense principal of the delivery system, andother process requirements.PRODUCTItemNumberTypeViscosityRangeDispensePatternsUsed to DispenseStrokeAdjustmentActuationLOW VISCOSITY CYANOACRYLATE APPLICATORLoctite ®LV Hand HeldApplicator97130 Pneumatic LowDrop,Dot, BeadInstant Adhesives,RetainingCompounds,ThreadlockersYesFootGENERAL PURPOSE APPLICATORSLoctite ®ManualHand HeldApplicator97111 ManualLow toMediumDrop,Dot, BeadInstant Adhesives,Light Cure/Acrylics,RetainingCompounds,ThreadlockersYesFingerLoctite ®PneumaticHand HeldApplicator97112 PneumaticLow toMediumDrop,Dot, BeadInstant Adhesives,Light Cure/Acrylics,RetainingCompounds,ThreadlockersYesFootLoctite ®PneumaticHand HeldApplicator97116 PneumaticLow toMediumDrop,Dot, BeadInstant Adhesives,Light Cure/Acrylics,RetainingCompounds,ThreadlockersYesFingerPINCH TUBE APPLICATORSLoctite ®Vari-Drop Applicator9713197132Pinch TubeLow toMediumDrop,Dot, BeadInstant Adhesives,RetainingCompounds,ThreadlockersYesFinger58

Dispenser, Controller and Reservoir arerequired with these valves.DISPENSING Hand Held ValvesLOW VISCOSITY CYANOACRYLATE APPLICATORLOCTITE ® LV HAND HELD APPLICATORItem Number: 97130The Loctite® LV Hand Held Applicator is a pneumatically operated, adjustableseat valve designed for accurate dispensing of low viscosity adhesives includingcyanoacrylates. The valve body and stem are constructed of PTFE to preventpremature curing and together with the fine tuning strokeadjustment, this valve can deliver very small and repeatabledrop sizes shot after shot. This valve must be used inconjunction with a Loctite® brand controller and productTypereservoir, sold separately.Viscosity RangeFeatures:• Dispenses low viscosity cyanoacrylates, anaerobic,and other adhesives under 10,000 cP• Slim, ergonomic design greatly reduces hand fatigue• Forward closing to avoid air entrapment and potentialpremature curing of cyanoacrylates• Stroke adjustment for fine -tuningof dispense characteristics• Dispenses repeatable drop sizes down to 0.005 g• Easy repair/replacement of wetted componentsTheory of OperationWhen used in conjunction with a pressure-time controller andadhesive reservoir, the valve is opened by an internal, single -acting cylinder and piston rod. After initiating the control cycle,the piston is pulled, opening the PTFE flow channel, andallowing adhesive to pass. At the end of the controlled open time,pressure is released and the valve is closed via an internal springmechanism, closing off the flow channel. The amount ofdispensed adhesive is controlled by adjustment of air pressure,valve open time, size of dispensing needle, and piston stroke.NO FLOWFLOWThe RED represents the fluid path.TECHNICAL SPECIFICATIONSPneumaticLowSize7" L x 1.6" Maximum Diameter(170 mm L x 40 mm Maximum Diameter)Weight 5 oz. (140 g)Maximum Cycle2 Shots per secondPort SizeFluid Inlet – 1 ⁄4" TubingAir Inlet5 ⁄32" TubingFluid Pressure4 to 30 psi (0.25 to 2 bar)Pneumatic SupplyMinimum: 60 psi (4.8 bar) / Maximum: 100 psi (7 bar)Dispense PatternsDrop, Dot, BeadUsed to DispenseInstant Adhesives, Retaining Compounds, ThreadlockersStroke AdjustmentYesActuationFootParts Included(1) 2 m Product Feed Line, PTFE lined, 1 ⁄4" OD(1) LV Hand Held Applicator (1) 2 m Pneumatic Tubing(1) Needle Variety Kit (1) Silicone Grease(1) ManualAdditional Information98090 –Loctite ®Shot Miser Reservoir97007 / 97010 –Loctite ®IntegratedSemi-AutomaticControllers1022006 –Loctite ® DigitalMulti-FunctionalControllerFor Spare Parts and Accessories, see page 84.For Fluid Compatibility Selector Chart, see page 63.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately98079 –Loctite ®Shot Miser Controller97017 / 97020 –Loctite ® IntegratedSemi-AutomaticControllers withLow Level Sensor97101 –Loctite ® DigitalDispenseController97293 – Loctite ® Finger Switch for 9713097123 –Loctite ® SingleChannel AutomaticController982720 / 982721 /982723 / 982724 /982726 / 982727 –Loctite ® Bond-A-Matic ® Reservoirs98501 –Loctite ®ApplicatorHolderFor additional information and the full line of equipment, visit www.equipment.loctite.com.59

Hand Held ValvesDISPENSINGGENERAL PURPOSE APPLICATORSLOCTITE ® MANUAL HAND HELD APPLICATORItem Number: 97111The Loctite® Manual Hand Held Applicator is a consistent performing, highly reliable, adhesivedispense valve. It features a manual trigger actuator that is ergonomically designed for comfort,application control, and a low actuation force to reduce hand fatigue. It also incorporates asuck-back feature that prevents dripping or stringing. This valve must be used in conjunctionwith a Loctite® Bond-A-Matic® 3000 Reservoir (item 982726 for low viscosity, item 982727for medium to high viscosity), sold separately. Since this valve is manually controlled,it is not capable of timed dispensing or compatible with low level sensing.Features:• Pistol grip provides comfort and control• Low actuation force to reduce hand fatigue• Suck-back feature ensures accuracy and control• Dispenses products up to 15,000 cP with 1 ⁄4" feed line (standard)• Dispenses products up to 80,000 cP with 3 ⁄8" feed line (optional)• Operational with manually controlled pressure reservoirsTheory of OperationThe hand held applicator is a modular design made up of aproduct shut-off valve and valve actuator. This type of designprovides quick on-line serviceability. The adjustable suck-backfeature eliminates stringing and dripping. The shut- off of theLoctite® Hand Held Applicator takes place mechanically with thespring return of the shutoff piston to the rest position. Choosefrom four optional Loctite® Bond-A-Matic® Reservoirs that canbe used with the Loctite® Hand Held Applicator.NO FLOWTECHNICAL SPECIFICATIONSTypeManualViscosity RangeLow to MediumSize1.12" D x 5.2" L x 2.74" WWeight 3.5 oz. (99.2 g)Air Input60 psi minimumProduct Inlet1 ⁄4 inchWetted ComponentsAcetal Copolymer, PTFE, PTFE Coated MetalDispense PatternsDrop, Dot, BeadUsed to DispenseInstant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersStroke AdjustmentYesActuationFootParts Included(1) Hand Held Applicator (1) Applicator Grip(1) Trigger Lever (1) Needle Kit (1) ManualAdditional Information For Spare Parts and Accessories, see page 84.For Fluid Compatibility Selector Chart, see page 63.For Dispense Tips, see pages 80-81.Additional Accessories Sold SeparatelyFLOW98501 –Loctite ® ApplicatorHolder982726 / 982727 –Loctite ® Bond-A-Matic ®ReservoirsThe RED represents the fluid path.97220 – 3 ⁄8" Feed Line Kit60For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITE ® PNEUMATIC HAND HELD APPLICATORItem Number: 97112 – Foot Switch ActivatedThe Loctite® Pneumatic Hand Held Applicator (item 97112) is a consistent performing, highlyreliable, adhesive dispensing valve. It is ergonomically designed for comfortable, applicationcontrol. It also incorporates a suck-back feature that prevents dripping or stringing. This valvemust be used in conjunction with a Loctite® brand controller and product reservoir that are footswitch activated. These are sold separately.DISPENSING Hand Held ValvesLOCTITE ® PNEUMATIC HAND HELD APPLICATORItem Number: 97116 – Finger Switch ActivatedThe Loctite® Pneumatic Hand Held Applicator (item 97116) is a consistent performing, highlyreliable, adhesive dispense valve. It features a pneumatic trigger actuator that is ergonomicallydesigned for comfort, application control, and a low actuation force to reduce hand fatigue. Italso incorporates a suck-back feature that prevents dripping or stringing. This valve must be usedin conjunction with a Loctite® brand controller and product reservoir, sold separately.Features of Pneumatic Hand Held Applicators:• Pistol grip provides comfort and control• Low actuation force to reduce hand fatigue• Suck-back feature ensures accuracy and control• Dispenses products up to 15,000 cPwith 1 ⁄4" feed line (standard)• Dispenses products up to 80,000 cPwith 3 ⁄8" feed line (optional)• Operational with manual, semi-automatic,and automatic controllersTheory of OperationBoth hand held applicators are a modular design made up of aproduct shut-off valve and valve actuator. This type of designprovides quick on-line serviceability. The adjustable suck-backfeature eliminates stringing and dripping. The shut-off of allhand held applicators takes place mechanically with the springreturn of the shut-off piston to the rest position. Henkel offers aselection of Loctite® brand product reservoirs that can be usedwith the Loctite® Hand Held Applicators.The RED represents the fluid path.NO FLOWFLOWTECHNICAL SPECIFICATIONSTypePneumaticViscosity RangeLow to MediumSize1.12" D x 5.2" L x 2.74" WWeight 97112: 4.9 oz. (138.9 g) 97116: 12 oz. (340 g)Air Input60 psi min.Product Inlet1 ⁄4 inchWetted ComponentsAcetal Copolymer, PTFE, PTFE Coated MetalDispense PatternsDrop, Dot, BeadUsed to DispenseInstant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersStroke AdjustmentNoActuation97112: Foot (Foot switch isnot included with valve, but is97116: Finger(Finger switch is included)included with all controllers)Parts Included(1) Hand Held Applicator (1) Applicator Grip(1) Needle Kit (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see page 63.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately98022 –Loctite ® 300 mlCartridgePusher982720 / 982723 /982726 / 982727 –Loctite ® Bond-A-Matic ®Reservoirs with Low LevelSensing (97116 only)1022006 –Loctite ® DigitalMulti-FunctionalController(97112 only)97007 / 97010 –Loctite ® IntegratedSemi-AutomaticControllers97101 –Loctite ® DigitalDispenseController(97112 only)97220 – Loctite ® 3 ⁄8" Feed Line Kit97017 / 97020 –Loctite ® IntegratedSemi-AutomaticControllers withLow Level Sensors982721 / 982724 –Loctite ® Bond-A-Matic ®Reservoirs(97112 only)98501 – Loctite ®Applicator HolderFor additional information and the full line of equipment, visit www.equipment.loctite.com.61

Hand Held ValvesDISPENSINGPINCH TUBE APPLICATORLOCTITE ® VARI-DROP APPLICATORItem Numbers: 97131 and 97132The Loctite® Vari-Drop applicator is low cost, manually controlled pinch valve suitablefor dispensing low to medium viscosity products. The adjusting screw allows repeatabledispense from drops to heavy beads. The quantity applied is dependent upon the strokeset for the trigger, and how long the operator holds down the trigger.Features:• Accepts a variety of dispensing needles to apply precise amounts of product• Low cost• Designed with light blocking materialsfor light curing adhesives• Field serviceableTheory of OperationThe Loctite® Vari-Drop Applicator is used to manuallydispense Loctite® brand products at a controlled rate of flow. Thevalve is capable of dispensing light to heavy beads or drops. Thedesign is cost effective and user friendly. The operator manuallypushes the finger switch down for flow, and releases the switchto discontinue flow.The RED represents the fluid path.NO FLOWFLOWTECHNICAL SPECIFICATIONSTypePinch TubeViscosity RangeLow to MediumSize5 ⁄8" H x 5 ⁄8" W x 6 1 ⁄4" LWeight 1.5 oz. (42.5 g)Air Input100 psiFluid inlet1 ⁄4" tubeFluid Pressure100 psi maximumFluid Viscosity Range100 to 80,000 cPWetted ComponentsPTFE, polyethyleneTubing with PTFE 97131: Yes 97132: NoUsed to DispenseInstant Adhesives, Light Cure/Acrylics,Retaining Compounds, ThreadlockersStroke AdjustmentNoActuationFingerParts Included 97131:(1) Vari-Drop Applicator(1) 7' x 1 ⁄4" OD PTFE LinedHose with Hose Guards(1) Needle Kit 97262(1) Manual97132:(1) Vari-Drop Applicator(1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see page 63.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately98501 –Loctite ®ApplicatorHolder982719 /982722 –Loctite ® Bond-A-Matic ® 3000Dispensers97220 – 3 ⁄8" Feed Line Kit98022 –Loctite ® 300 mlCartridgePusher62For additional information and the full line of equipment, visit www.equipment.loctite.com.

Dispense Controller and Reservoir arerequired with these valves.DISPENSING Hand Held ValvesLoctite® Brand Hand Held Dispensing ValveFluid Capability ChartPRODUCTLoctite ® LVHand Held ApplicatorLoctite ® ManualHand Held ApplicatorLoctite ® PneumaticHand Held ApplicatorLoctite ® PneumaticHand Held ApplicatorLoctite ® Vari-Drop ApplicatorItem Number 97130 97111 97112 97116 97131 / 97132Accelerators ✓ ✓ ✓ ✓ ✓Acrylics ✓ ✓ ✓ ✓Activators ✓ ✓ ✓ ✓ ✓Anaerobics ✓ ✓ ✓ ✓ ✓Cyanoacrylates ✓ ✓ ✓ ✓ ✓Inks ✓ ✓ ✓ ✓ ✓Oils ✓ ✓ ✓ ✓Paints ✓ ✓ ✓ ✓Primers ✓ ✓ ✓ ✓ ✓Reagents ✓ ✓ ✓ ✓ ✓Solvents ✓ ✓UV & Light CureFluids ✓ ✓ ✓ ✓UV Anaerobics ✓ ✓ ✓ ✓Water ✓For additional information and the full line of equipment, visit www.equipment.loctite.com.63

DISPENSINGValves & PumpsValves & PumpsLoctite® brand dispensing valves and pumps are value-added, robust, dispensing valves foradhesive or fluid delivery. Each valve is uniquely designed to meet different manufacturingneeds. These valves should be combined with a reservoir and/or a controller. Selection of aLoctite® brand valve or pump is based on the chemistry and viscosity of the adhesive or fluidbeing used and process requirements.PRODUCTItemNumberTypeViscosityRangeDispensePatternsUsed to DispenseStrokeAdjustmentSuck-BackHIGH PRECISION VALVESLoctite ®StationaryApplicator Valve9711397114HighPrecisionLow toMediumDrop,Dot, BeadGel Instant Adhesives,Instant Adhesives,Retaining Compounds,ThreadlockersYesYesLoctite ®Micro NeedleValve98084HighPrecisionLow toMediumDrop,Dot, Bead,MicrodotsLight Cure/Acrylics Yes NoHIGH PERFORMANCE DIAPHRAGM VALVESLoctite ®Light CureDispense Valve98009HighPerformanceDiaphragmLow toMediumDrop,Dot, BeadLight Cure/Acrylics,Retaining Compounds,ThreadlockersYesNoLoctite ®CyanoacrylateDispense Valve98013HighPerformanceDiaphragmLow toMediumDrop,Dot, Bead,MicrodotsInstant Adhesives,Retaining Compounds,ThreadlockersYesNoGENERAL DUTY DIAPHRAGM VALVESLoctite ®DiaphragmValve9713597136General DutyDiaphragm0 to2,500 cP Drop,2,500 to Dot, Bead5,000 cPLight Cure/AcrylicsInstant Adhesives,Retaining Compounds,ThreadlockersNoNoSPRAY VALVESLoctite ®Spray Valve98520 Spray Valve Low SprayPrimers, Activators,AcceleratorsYesNoHIGH VISCOSITY FLUID AND PASTE VALVESLoctite ®Poppet ValveLoctite ®Stainless SteelPoppet Valve986300983914HighViscosityFluid andPasteValvesMedium toHighDrop, BeadAnaerobic Gasketing,Retaining Compounds,Threadlockers982621 Paste SiliconesYesYesPINCH TUBE VALVELoctite ®Shot Miser Dispense Valve98085Pinch TubeValveLow toMediumDrop, Dot,BeadInstant Adhesives,Retaining Compounds,ThreadlockersNoNoPOSITIVE DISPLACEMENT PUMPLoctite ®PositiveDisplacementPump983330PositiveDisplacementValveLow toMediumDropRetaining Compounds,Threadlockers,Any single-component,non-moisture-curing, lowto medium viscosity fluid(

DISPENSINGDispense Controller and Reservoir arerequired with these valves.Valves & PumpsHIGH PRECISION VALVESLOCTITE ® STATIONARY APPLICATOR VALVEItem Numbers: 97113 and 97114The Loctite® Stationary Applicator Valve is a slim, lightweight, patented, seal-lessdispense valve. It utilizes double-acting, adjustable air to open and close cylinderswhich allows for precise valve sequencing to meet your most stringentpressure-time dispense requirements. This valve also featuresadjustable suck-back to eliminate stringing and dripping, andmodular design providing for on-line serviceability. It is suitablewith all low to medium adhesive viscosities. This valve must be Typeused in conjunction with a Loctite® brand controller, product Viscosity Rangereservoir and dispense tip, sold separately.SizeWeightFeatures:• Slim, lightweight, patented seal-less dispense valve• Modular design of product shut-off valve and valveactuator provides on-line serviceability• Fail safe – spring assisted close• Suck-back feature eliminates product stringing• Double-acting cylinder allows adjustable opening andclosing speed for process control• Cycle rate exceeds 36 per minute• Operational with pressure-time applications• Dispenses fluids up to 15,000 cP (item 97113) or80,000 cP (item 97114)Theory of OperationProduct flows to the dispense valve from the reservoir. Adjustingthe double-acting cylinders allows control of the valve openingand closing rates. Use of the adjustable suck-back featureeliminates dripping and stringing. These valves can be used inboth the stationary or advancing modes.NO FLOWThe RED representsthe fluid path.FLOWTECHNICAL SPECIFICATIONSHigh PrecisionLow to Medium7.6" L x 2.4" H0.75 lbs.Maximum Fluid Pressure80 psiAir Inlet Port5 ⁄32" Tubing FittingAir Inlet60 to 80 psi minuteProduct Inlet 97113: 1 ⁄4" OD Tube 97114: 3 ⁄8" OD TubeFluid Outlet1 ⁄4" UNF, Tip Adapter, Luer-Lok ® Output FittingDispense PatternsDrop, Dot, BeadUsed to DispenseGel Instant Adhesives, Instant Adhesives,Retaining Compounds, ThreadlockersStroke AdjustmentYesSuck-BackYesValve TypePressure-Time DispenseWetted ComponentsAcetal Copolymer, PTFE and PTFE Coated MetalsAir CylinderDouble acting diaphragm cylinder / flow control ofboth ports / spring return for fail safe functionParts Included (1) Feed Line (1) Anti-Bubbler Adapter and Sleeve(1) Dispense Valve (1) Needle Kit (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see pages 73-74.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately97123 – Loctite ®Single ChannelAutomaticController97101 –Loctite ® DigitalDispenseController1022006 –Loctite ® DigitalMulti-FunctionalController97007 / 97010 –Loctite ® IntegratedSemi-AutomaticControllers97017 / 97020 –Loctite ® IntegratedSemi-AutomaticControllers withLow Level Sensors98022 – Loctite ®300 ml CartridgePusher97115 – Loctite ® Electric Rotorspray982726 / 982727 –Loctite ®Bond-A-Matic ®Reservoirs982720 / 982723 –Loctite ® Bond-A-Matic ® Reservoirswith Low LevelSensors984691 –Loctite ®AdvancingSlide (2" Stroke)65

Valves & PumpsDISPENSINGLOCTITE ® MICRO NEEDLE VALVEItem Number: 98084The Loctite® Micro Needle Valve is a pneumatically-operated, needle and seat valve that is designedfor very small adhesive drops in a pressure-time dispensing system. It is precise down to 0.0005 ml,and has an adjustable stroke control to pinpoint your exact dispense requirement. This valve featuresthe convenience to directly attach filled product syringes ranging in size from 5 to 30 ml fordispensing. Only stainless steel cannula dispense needles should be used for proper dispensingand the valve must be used in conjunction with a Loctite® brand controller, product reservoirand dispense tip, sold separately.Features:• Dispenses low to medium viscosity UV curing products down to a fraction of a microliter• Short opening stroke provides extremely fast, positive shut-off• External stroke control adjustment makes it easy for operator to fine tune shot sizes• Compact design allows for mounting flexibility andeasy integration into automated applications• Capable of connecting to syringe barrelsTECHNICAL SPECIFICATIONSas small as 5 ml to 30 mlTypeHigh Precision• Change the luer fitting to a tube fittingViscosity RangeLow to Mediumand any size pressure reservoir can be usedSize 5" L x 1.1" D (127 mm L x 28.5 mm D)• Designed to be used with high precisionWeight 8 oz. (227 g)stainless steel needlesMaximum Fluid Pressure100 psi (7 bar)Theory of OperationApplication of adhesive using the Loctite® Micro Needle Valve isachieved in conjunction with a pressure-time controller andadhesive reservoir system. The controller directs the pressurizedair to the actuator of the valve through the inlet air port for a predeterminedperiod of time. This causes the normallyclosed, needle rod assembly to retract from the seat inside thedispensing tip, allowing the adhesive to flow from the materialinlet to the dispensing tip. At the end of the cycle, the controllerreleases the input air pressure, allowing the spring to return theneedle rod back to its original closed position.NO FLOWFluid Inlet1 ⁄8" NPTAir Inlet 10-32 UNF-2B Male Luer-Lok ®Pneumatic Supply Minimum – 60 psi (4.8 bar) Maximum – 100 psi (7 bar)Product InletFluid OutletDispense PatternsUsed to DispenseStroke AdjustmentSuck-BackValve TypeWetted Components1 ⁄4" NPT1 ⁄4" UNF Luer-Lok ® TipDrop, Dot, BeadLight Cure/AcrylicsYesNoPressure-Time DispenseAcetal Copolymer, Stainless Steel, PTFEParts Included(1) Needle Variety Kit – Uses stainless steel needles only(1) Fluid Fitting, 1 ⁄8" NPT x 1 ⁄4" Tube(1) Product Feed Line, 1 ⁄4" (1) Air Line Tubing, 5 ft.(1) Micro Needle Valve (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see pages 73-74.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately97123 – Loctite ®Single ChannelAutomaticController97007 / 97010 –Loctite ®IntegratedSemi-AutomaticControllers97208 – Loctite ®10 ml SyringeAir Line Adapter97017 / 97020 –Loctite ® IntegratedSemi-AutomaticControllerswith LowLevel Sensors97245 – Loctite ®30 ml SyringeAir Line Adapter982720 / 982721 / 982723 /982724 / 982726 /982727 –Loctite ®Bond-A-Matic ®ReservoirsFLOW1022006 –Loctite ® DigitalMulti-FunctionalController97101 –Loctite ® DigitalDispenseController984691 – Loctite ®AdvancingSlide(2" Stroke)The RED represents the fluid path.98099 – Loctite ® Precision Filter and Regulator(required for use with all pressure-time dispense controllers, other than 97123)985281 – Loctite ® Bracket, 997569 – Loctite ® Silicone Grease66For additional information and the full line of equipment, visit www.equipment.loctite.com.

HIGH PERFORMANCE DIAPHRAGM VALVESLOCTITE ® LIGHT CURE DISPENSE VALVEItem Number: 98009The Loctite® Light Cure Dispense Valve (item 98009) is a diaphragmvalve that provides high-resolution stroke adjustment andconsistent no -drip repeatable dispensing. It is suitable for all lowto medium viscosity light curable adhesives, but can also be usedfor retaining compounds and threadlockers. It has a small profileand simple design that minimizes space requirements andfacilitates routine preventative maintenance. This valve must beused in conjunction with a Loctite® brand controller, productreservoir and dispense tip, sold separately.LOCTITE ® CYANOACRYLATE DISPENSE VALVEItem Number: 98013The Loctite® Cyanoacrylate Dispense Valve is a diaphragm valvethat provides high-resolution stroke adjustment and consistent,no -drip, repeatable dispensing. It is suitable for all low tomedium viscosity cyanoacrylate adhesives but can also be usedfor retaining compounds and threadlockers. It has a small profileand simple design that minimizes space requirements andfacilitates routine preventative maintenance. This valve must beused in conjunction with a Loctite® brand controller, productreservoir and dispense tip, sold separately.Features of Dispense Valves:• Compact size and weight• Adjustable fluid flow control• Fail safe, air to open, spring close• Positive shutoff, no seals• Bubble -free, no-drip dispensing• Field serviceable• Easy cleaning without valve de-mounting• Cycle rate exceeds 500 per minuteTheory of OperationProduct flows to the dispense valve from the reservoir. Flowrate is adjusted by turning the flow control dial on top of thevalve. The valves can be used in both the stationary oradvancing modes.NO FLOWFLOW98009 – Loctite ® Light CureDispense ValveTECHNICAL SPECIFICATIONSTypeHigh Performance DiaphragmViscosity RangeLow to MediumSize3.090" x 1.060" diameterWeight 4.5 oz. (128 g)Maximum Fluid Pressure70 psiFluid Inlet1 ⁄8" NPTFluid Outlet1 ⁄4"-28 UNF, Tip Adapter, Luer-Lok ® Output FittingAir Inlet Port1 ⁄4" Tube FittingAir Input70 to 90 psiAir CylinderSingle Acting, Spring Return, Stroke Control,Aluminum, Hard Coated FinishDispense PatternsDrop, Dot, Bead, MicrodotUsed to Dispense98009: Light Cure/Acrylics,Retaining Compounds,Threadlockers98013: Gel Instant Adhesives,Retaining Compounds,ThreadlockersStroke AdjustmentYesSuck-BackNoValve TypeDiaphragmWetted Components 98009:Chamber: Acetal CopolymerDiaphragm: Ultra HighMolecular Weight IrradiatedPolyethylene98013: Chamber: Ultra HighMolecular Weight PolyethyleneDiaphragm: Ultra HighMolecular Weight IrradiatedPolyethyleneMounting Hole(1) 10-32 UNFParts Included (1) 5 ft. Air Line Tubing (attached to valve) (1) Needle Kit(1) 6 ft. Product Tubing, 1 ⁄4" OD, PTFE Lined(1) Valve Mount Screw (1) Valve Assembly (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see pages 73-74.For Dispense tips, see pages 80-81.Additional Accessories Sold Separately97123 – Loctite ®Single ChannelAutomaticController97101 –Loctite ® DigitalDispenseController97007 / 97010 –Loctite ® IntegratedSemi-AutomaticControllers97017 / 97020 –Loctite ® IntegratedSemi-AutomaticControllers withLow Level Sensors98013 – Loctite ® CyanoacrylateDispense Valve982726 / 982727 –Loctite ® Bond-A-Matic ® Reservoirs982720 / 982723 –Loctite ® Bond-A-Matic ® Reservoirswith Low LevelSensorsDISPENSING Valves & PumpsThe RED represents the fluid path.1022006 –Loctite ® DigitalMulti-FunctionalController98022 –Loctite ® 300 mlCartridgePusher984691 – Loctite ®AdvancingSlide(2" Stroke)For additional information and the full line of equipment, visit www.equipment.loctite.com.67

DISPENSINGValves & PumpsGENERAL DUTY DIAPHRAGM VALVESLOCTITE ® DIAPHRAGM VALVEItem Numbers: 97135 and 97136The Loctite® Diaphragm Valve is a pneumatically-activated dispense valve that utilizes a floating PTFE diaphragm forconsistent, trouble-free dispensing. It is suitable for all low to medium viscosity light curable adhesives, retaining compounds,and threadlockers. The valve has a simple design that minimizes space requirements and facilitates routine preventativemaintenance. It is ideal to support automatic rotospray and electric rotorspray applications, and must be usedin conjunction with a Loctite® brand controller, product reservoir and dispense tip, sold separately.Features:• Cost effective valve for use with pressure-time dispense systems• Modular design and floating diaphragm allow for easy cleaning or repair• Fail safe, spring assisted close• Internal components are made of PTFEto prevent premature curing• Flow rates can be increased with use of a 3 ⁄8" feed line• Available in low viscosity (item 97135) and mediumviscosity (item 97136) versionsTheory of OperationApplication of adhesive using the Loctite® Diaphragm Valve isachieved in conjunction with a pressure-time controller andadhesive reservoir system. The opening of the diaphragm takesplace by pressurizing the internal single -acting cylinder andpiston. Initiating a dispense cycle causes the piston to lift fromthe diaphragm. The adhesive pressure then pushes the diaphragmaway from the flow path, allowing the adhesive to flow to thedispense needle. At the end of the dispense time, pressure isreleased and an internal spring reseats the diaphragm over theflow path. The amount of adhesive applied is controlled by thedispense time, air pressure, and dispense needle gauge size.NO FLOWTypeTECHNICAL SPECIFICATIONSGeneral Duty DiaphragmViscosity Range 0 to 2,500 cP 2,500 to 5,000 cPSize 5" L x 1.25" D (127 mm L x 32 mm D)Weight 10.5 oz. (300 g)Maximum Fluid Pressure7 to 58 psi (0.5 to 4 bar)Fluid Inlet 1 ⁄4" Tubing or upgrade to 3 ⁄8" (Item 97220)Air Inlet5 ⁄32" TubingPneumatic Supply Minimum – 73 psi (5 bar) Maximum – 100 psi (7 bar)Product Inlet 97135: 1 ⁄4" OD 97136: 1 ⁄8" ODFluid OutletDispense PatternsUsed to DispenseStroke AdjustmentSuck-BackValve TypeWetted Components1 ⁄4" UNF Luer-Lok ® TipDrop, Dot, BeadLight Cure/Acrylics, Retaining Compounds, ThreadlockersNoNoPressure-Time DispenseAcetal, Stainless Steel, PTFE Coated Metals(1) Diaphragm Valve (1) Product Feed Line,Parts Included1 ⁄4" inch(1) Needle Variety Kit (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see pages 73-74.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately98090 – Loctite ®Shot Miser Reservoir98079 – Loctite ®Shot Miser Controller97123 – Loctite ®Single ChannelAutomaticControllerFLOW97007 / 97010 –Loctite ® IntegratedSemi-AutomaticControllers97017 / 97020 –Loctite ® IntegratedSemi-AutomaticControllers withLow Level Sensors982720 / 982721 / 982723 /982724 / 982726 /982727 –Loctite ®Bond-A-Matic ®ReservoirsThe RED represents the fluid path.1022006 –Loctite ® DigitalMulti-FunctionalController97101 –Loctite ® DigitalDispenseController97115 – Loctite ®Electric Rotorspray97118 / 97119 – Loctite ®Advancing Slides68For additional information and the full line of equipment, visit www.equipment.loctite.com.

SPRAY VALVESLOCTITE ® SPRAY VALVE Item Number: 98520LOCTITE ® SPRAY VALVE CONTROLLER Item Number: 98521The Loctite® Spray Valve (item 98520) provides an effective solution for automatic spraying of lowviscosity primers, accelerators and activators up to 1,200 cP, with high precision and long termreliability. It features an external stroke adjustment, providing consistent performance over a widerange of operating conditions. The high performance needle and seat design ensures effectivecontrol of over-spray and nozzle dripping. This valve is most effectively controlled using theLoctite® Spray Valve Controller (item 98521), providing digital pressure control of both on/offtiming and atomization air, sold separately.Features:Loctite ® Spray Valve• High precision, short stroke, needle and seat designproviding repeatable spray pattern performance• Air pressure and stroke adjustment allowa wide range of spray pattern coverage control• Full stainless steel body and wetted parts provide longterm performance and durability• Cycle rate up to 600 per minute• Easy cleaning and servicing• 0.046" nozzle diameter (standard) provides consistentround full cone pattern• Optional 0.014" and 0.028" diameter nozzle kitsfor lower spray pattern applicationsLoctite ® Spray Valve Controller• Microprocessor -based, timed controller• Fully independent valve/open close andatomization air supply• 3 separate timed sequences – pre-spray, valve on,post-spray/valve off• Timed or manual mode with foot pedal control• All time modes maintained in memorywith AC power disconnectedProduct flows from a reservoir under air pressure as providedby the Loctite® Spray Valve Controller. The controller alsoprovides air to open/close the valve and a separate atomizingair source to the Loctite® Spray Valve nozzle assembly. Timingand pressure controls for atomizing air, fluid line pressure,valve stroke adjustment, height from surface, and materialviscosity can be adjusted to optimize required dispensequantity and coverage pattern.Atomizing AirOFFNO FLOWThe RED represents the fluid path.Atomizing AirONFLOWTECHNICAL SPECIFICATIONS98520 – Loctite ® Spray ValveTypeSpray ValveViscosity RangeUp to 1,200 cPAir Pressure Supply60 to 100 psiFluid Inlet Port1 ⁄8" NPTWeight 0.8 lbs. (385 g)Spray Height / PatternDiameterDispense PatternUsed to DispenseStroke AdjustmentSuck-BackValve TypeWetted ComponentsParts Included1"/0.25", 2"/ 0.50", 3"/ 0.75",4"/1.5", 5"/3" (0.046 nozzle)Spray – CircularAccelerators, Activators, PrimersYesNoPressure-Time Dispense304 Stainless Steel(1) Valve Mounting Bracket with screw(1) Valve Assembly (1) Fluid Line Assembly(1) Air Line Assembly (1) Operation Manual(1) Hex Key (1) Seat Removal Tool98521 – Loctite ® Spray Valve ControllerPower Source120 VACAir Supply1 ⁄8" Tube Fitting – 100 psi maxWeight5.5 lbs.Dimensions2.5" H x 12.4" L x 7.6" DParts Included(1) Controller Unit & Power Cord (1) Foot Pedal(1) Air Supply Line & Filter – 4 ft.Additional InformationFor Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see pages 73-74.Additional Accessories Sold Separately989268 –0.014" Nozzle Kit989269 –0.028" Nozzle Kit984621 – Loctite ®Replacement Foot Switch98521 – Loctite ® Spray Valve Controller.(See page 17)982720 / 982723 –Loctite ® Bond-A-Matic ® Reservoirswith Low LevelSensors98520 – Loctite ®Spray Valve982726 / 982727 –Loctite ®Bond-A-Matic ®ReservoirsDISPENSING Valves & Pumps69

Valves & PumpsDISPENSINGHIGH VISCOSITY FLUID AND PASTE VALVESLOCTITE ® POPPET VALVES Item Numbers: 986300 and 983914LOCTITE ® STAINLESS STEEL POPPET VALVE Item Number: 982621The Loctite® Poppet Valves are designed to dispense Loctite® brand high viscosityanaerobic form-in-place gasketing products, structural acrylics, and silicones. The valves aretypically used in conjunction with a positive displacement pump or a pressure-time system.They feature a suck-back capability and can operate at fluid pressures up to 625 psi. Item986300 uses dispense nozzles with a bayonet style mounting that improves nozzle endlocation and can withstand the high fluid pressures required of high viscosity fluiddispensing. Items 983914 and 982621 are equipped with a 1 ⁄8" NPT outlet for Luer-Lok® andstandard needle dispensing. All valves have stroke adjustment capability and are treatedwith a proprietary Loctite® coating to prevent premature adhesive curing.Features:• Poppet design gives valve “suck-back” feature• Bayonet type mounting of nozzles provides end location repeatability• Handles product pressures up to 625 psi• Positive mounting surface• High strength plastic material versions are specially treatedto be inert to Loctite® brand products• Stainless steel version is also specially treated andis recommended for abrasive and silicone products982621 – Loctite ® StainlessSteel Poppet Valve986300 and 983914 –Loctite ® Poppet ValvesTheory of OperationUse the Loctite® Poppet Valve to apply product in drops andbeads with a semi or fully automatic dispensing system. Thevalve can be used in both the stationary or advancing modes.They may be used with the Loctite® Pump-A-Bead II or anyother dispense system that can provide a source of pressurizedproduct and a 4-way pneumatic valve.NO FLOWThe RED represents the fluid path.FLOWTECHNICAL SPECIFICATIONSTypeHigh Viscosity Fluids and PastesViscosity RangeMedium to High anaerobics up toLow Viscosity silicone productsSize5.28" H x 2.00" DWeight1.3 lb. (0.59 kg) valve plus fittings and tubingMaximum Fluid PressureShould not exceed 625 psiAir Input60 psiInlet1 ⁄4" NPTDispense Tip Style 986300: Bayonet Style983914 and 982621: 1 ⁄8" NPT forLuer-Lok ® dispense tipsUsed to DispenseAnaerobic Gasketing,Retaining Compounds, Modified Silanes, SiliconesThreadlockersDispense PatternsBead, DropStroke AdjustmentYesSuck-BackYesValve TypePressure-Time DispenseWetted Components Acetal Copolymer treated with a proprietary Loctite ® brand processParts Included (1) Acetal Copolymer Body or Stainless Steel Poppet Valve with:(2) 4' Control Air Tubing (1) 4' Product Supply Tubing(1) Accessory Kit (1) ManualAdditional Information For Spare Parts and Bayonet type needles, see pages 84-85.For Fluid Compatibility Selector Chart, see pages 74-75.For Luer-Lok ® Dispense Tips, see pages 80-81.Additional Accessories Sold Separately984691 –986000 –Pump-A-Bead Slide (2" Stroke)Loctite ®Loctite ® Advancing70For additional information and the full line of equipment, visit www.equipment.loctite.com.

PINCH TUBE VALVELOCTITE ® SHOT MISER DISPENSE VALVEItem Number: 98085The Loctite® Shot Miser Dispense Valve is an economical pinch tube style valve that featuresan adjustable stroke for enhanced shot size control. This valve has a disposable fluid path forfast, easy and low cost replacement. This valve must be used in conjunction with a Loctite®brand controller and product reservoir, sold separately.Features:• Pneumatically-actuated automatic dispense valve• Pinch-tube disposable fluid path for fast, easy and low cost maintenance• Dispenses dots or beads• 1 ⁄4" diameter product feed tube• Adjustable valve stroke for enhanced shot size control• Replaceable pneumatic actuator• Integral Luer-Lok® fitting accepts all Loctite® brand dispense needlesTheory of OperationApplication of adhesive using the Loctite® Shot Miser DispenseValve is achieved in conjunction with a pressure-time controllerand adhesive reservoir system. The opening and closing of thevalve is controlled by the system’s timer controls. When thedispense cycle is initiated, the piston pulls away from the pinchtube channel in the valve, opening the flow path, and allowingadhesive to pass. At the end of the dispense cycle, pressure isthen reapplied to the piston, closing the flow path. The amountof dispensed adhesive is controlled by adjustment of airpressure, valve open time, and the sizeof the dispensing needle.NO FLOWTypeViscosity RangeSizeWeightMaximum Fluid PressureFluid InletOutletDispense PatternsUsed to DispenseStroke AdjustmentSuck-BackValve TypeWetted ComponentsParts IncludedTECHNICAL SPECIFICATIONSPinch Tube ValveLow to Medium5.2" W x 1.75" L x 6.4" H0.5 lbs.100 psi1 ⁄4" TubeLuer-Lok ® TipDot, Drop, BeadInstant Adhesives, Retaining Compounds, ThreadlockersNoNoPressure-Time DispenseAcetal Copolymer, Stainless Steel, PTFE Coated Metals(1) Dispense Valve with 1 ⁄4" diameter Product Feed Tube(1) Dispense Needle Sample Kit(1) Valve Air Line (1) ManualAdditional Information For Spare Parts and Accessories, see pages 84-85.For Fluid Compatibility Selector Chart, see pages 74-75.For Dispense Tips, see pages 80-81.Additional Accessories Sold Separately97123 – Loctite ®Single ChannelAutomaticController97007 / 97010 –Loctite ® IntegratedSemi-AutomaticControllers982726 / 982727 –Loctite ®Bond-A-Matic ®ReservoirsDISPENSING Valves & PumpsThe RED represents the fluid path.FLOW97101 –Loctite ® DigitalDispenseController1022006 –Loctite ® DigitalMulti-FunctionalController97017 / 97020 –Loctite ® IntegratedSemi-AutomaticControllers withLow Level Sensors98022 –Loctite ® 300 mlCartridgePusher982720 / 982723 –Loctite ® Bond-A-Matic ® Reservoirswith Low LevelSensors984691 –Loctite ®AdvancingSlide(2" Stroke)For additional information and the full line of equipment, visit www.equipment.loctite.com.71

DISPENSINGValves & PumpsPOSITIVE DISPLACEMENT PUMPLOCTITE ® POSITIVE DISPLACEMENT PUMPItem Number: 983330The Loctite® Positive Displacement Pump features a patented, seal-less design. It is specificallydesigned to dispense Loctite® brand threadlockers and retaining compounds in rotosprayapplications with a high degree of precision. The dispense capability of this pump is 0.02 to 0.4 cc.It has a modular design for easy maintenance. For rotospray applications, it is normally used withthe Loctite® Digital Multi-Function Controller (item 1022006).Features:• Positive displacement• Pneumatically-operated• Designed for compatibility with Loctite® brand rotospray workstations• Modular design of product shut- off valve and valve actuatorprovides on-line serviceability• Cycle rate for low viscosity productsexceeds 120 per minute• Small, easy-to-use design• Adjustable stroke to control the amountof material dispensed• Compatible with a wide range of fluids• Repeatable and consistent delivery of productTypeViscosity RangeTheory of OperationUse the Loctite® Positive Displacement Pump for rotosprayinglow to medium viscosity fluids. Typically, this unit is used inconjunction with a gravity feed reservoir. The gravity feedreservoir will transfer the material from the storage tank tothe pump, which supplies material to the dispensing area.SizeWeightAir InputProduct Line FeedFluid CapacityCycle SpeedDispense PatternsUsed to DispenseStroke AdjustmentSuck-BackValve TypeWetted ComponentsParts IncludedTECHNICAL SPECIFICATIONSPositive Displacement PumpLow to Medium9.15" H x 1.88" D (maximum) / 2.6" W (with connections)1.7 lbs.60 to 90 psi3 ⁄8" OD before pump, 1 ⁄4" OD after pump0.02 to 0.40 cc per shot2 cycles per second maximum (adjustable)DropRetaining Compounds, Threadlockers,Any single-component, non-moisture-curing,low to medium viscosity fluid (

DISPENSINGDispense Controller and Reservoir arerequired with these valves.Valves & PumpsLoctite® Brand Valve & PumpFluid Capability ChartPRODUCTLoctite ® StationaryApplicator ValveLoctite ® MicroNeedle ValveLoctite ® Light CureDispense ValveLoctite ® CyanoacrylateDispense ValveLoctite ® DiaphragmValveItem Numbers 97113 / 97114 98084 98009 98013 97135 / 97136Accelerators ✓ ✓Acrylics ✓ ✓ ✓ ✓Activators ✓ ✓Anaerobics ✓ ✓ ✓ ✓Anaerobic GasketingCyanoacrylates ✓ ✓ ✓Inks ✓ ✓ ✓ ✓ ✓Lubricants✓Modified SilanesNon-Abrasive GreasesOils ✓ ✓ ✓ ✓One-Part Epoxies ✓Paints ✓ ✓ ✓Primers ✓ ✓Reagents ✓ ✓SiliconesSolvents ✓ ✓UV & Light Cure Fluids ✓ ✓ ✓ ✓UV Anaerobics ✓ ✓ ✓Water ✓ ✓ ✓ ✓For additional information and the full line of equipment, visit www.equipment.loctite.com.73

Valves & Pumps DISPENSINGLoctite® Brand Valve & PumpFluid Capability ChartPRODUCT Loctite ® Spray Valve Loctite ® Poppet ValveLoctite ® Stainless SteelPoppet ValveLoctite ® Shot Miser Dispense ValveLoctite ® PositiveDisplacement PumpItem Numbers 98520 986300 / 983914 982621 98085 983330Accelerators ✓ ✓Acrylics ✓ ✓Activators ✓ ✓Anaerobics ✓ ✓ ✓Anaerobic Gasketing✓Cyanoacrylates✓Inks ✓ ✓Lubricants ✓ ✓ ✓Modified Silanes✓Non-Abrasive Greases ✓ ✓Oils✓One-Part Epoxies ✓ ✓Paints ✓ ✓Primers ✓ ✓Reagents ✓ ✓Silicones✓Solvents ✓ ✓UV & Light Cure Fluids✓UV Anaerobics✓Water ✓ ✓74For additional information and the full line of equipment, visit www.equipment.loctite.com.

Pail PumpsHenkel offers Loctite® brand pail pump systems to effectively dispense both low viscosityfluids and high viscosity pastes from 5 and 55 gallon containers. These systems are verydurable and can be relied on for long term performance in the toughest workingenvironments. These systems are typically integrated into a complete dispensing systemfor a single component product, or used as a feed system for multiple component products.DISPENSING Pail PumpsLOCTITE ® LOW VISCOSITY FLUID PUMPSThe Loctite® Low Viscosity Fluid Pumps are specifically designed to dispense self-levelingproducts packaged in 5 gallon pails up to 55 gallon drums or tanks. The various pumpratios are suited for pumping low to medium viscosity fluids. These pumps are airoperated and deliver various product output volumes determined by the pumpratio and input pressure.Features:• Choice of two pump and seal materials – Carbon steelwith Viton seals or inert metal with EPR seals• 5 gallon pail or 55 gallon drum or tank capability• 1:1, 3:1, or 14:1 pump ratio versions (liquid to air pressure)Theory of OperationThese units, when configured with the necessary airand product hoses, air and fluid regulators, dispensevalves, tips and fittings, will pump self-leveling, lowto medium viscosity fluids from 5 gallon pailsup to 55 gallon drums or tanks.Typical Fluids Handled and Parts Supplied• Carbon Steel Systems: lubricants,epoxies, urethanes• Inert Metal with EPR seals: lubricants, epoxies,anaerobics, acrylics, light cure acrylics, epoxyhardener, urethanes, water-based products• Loctite® Brand Parts Supplied –(Highlighted in Purple in Component Diagram Below)•Low Viscosity Fluid Pump with appropriate tube foreither 5 gallon or 55 gallon as ordered – 1EAdditional InformationSee page 77 to select appropriatehosing, dispense valves, fluidregulators, air filters, dispensetips, and other accessories tocomplete your Loctite® LowViscosity Fluid Pump System.Loctite® LowViscosity Fluid PumpComponent DiagramNumber designation highlightsitem type in the accessorieschart on page 77.1A362B6ItemNumberRatioOutputperStrokeMaterialContainerMaximumProductViscosity (cP)988510 1:1 2.9 in 3 Carbon Steel 55 Gallon 500988514 3:1 7.9 in 3 Carbon Steel 55 Gallon 50,000988516 3:1 7.9 in 3 Inert Metal 55 Gallon 50,000988517 3:1 7.9 in 3 Carbon Steel 5 Gallon 50,000988519 3:1 7.9 in 3 Inert Metal 5 Gallon 50,000988520 14:1 1.7 in 3 Carbon Steel 55 Gallon 250,000988522 14:1 1.7 in 3 Inert Metal 55 Gallon 250,000988523 14:1 1.7 in 3 Carbon Steel 5 Gallon 250,000988525 14:1 1.7 in 3 Inert Metal 5 Gallon 250,0003355337452BManual SystemAutomatic System(Secondary Pressure Regulation)5332B47347For additional information and the full line of equipment, visit www.equipment.loctite.com.75

DISPENSINGPail PumpsLOCTITE ® HIGH VISCOSITY PASTE PUMP SYSTEMSThe Loctite® High Viscosity Paste Pump Systems are specificallydesigned to dispense paste products packaged in 5 gallon opentoppails up to 55 gallon drums. The various pump ratios aresuited for pumping medium to high viscosity paste products. Thehigh viscosity paste pump systems are fully assembled systemsconsisting of an air motor, pump tube, and pressure ram.Features:• Choice of three pump and seal materials –Carbon steel with polyurethane seals, carbon steelwith inert seals, or inert metal• 5 gallon open-top pails or 55 gallon drum capability• 22:1, 44:1, or 64:1 pump ratio versions(liquid to air pressure)Theory of OperationThese units, when configured with the necessary air andproduct hoses, air and fluid regulators, dispense valves,tips and fittings, will pump medium to high paste productsfrom 5 gallon open-top pails up to 55 gallon drums.Typical Fluids Handled and Parts Supplied• Carbon Steel Systems: lubricants, epoxies, urethanes• Carbon Steel Systems (with inert seals):RTV silicones, lubricants, epoxy resins,epoxy hardeners, and urethanes• Inert Metal Systems: lubricants, epoxies, anaerobics,acrylics, light cure acrylics, epoxy hardeners, urethanes,water-based products• Loctite® Brand Parts Supplied -(Highlighted in Purple in Component Diagram Below)(1) Air Motor – 1A(1) Single Post Primer/Follower plate –5 gallon systems – 1D(1) Twin Post Primer/Follower Plate –55 gallon systems – 1C(1) High Viscosity Pump Tube – 1BAdditional InformationSee page 77 to select appropriate hosing, dispense valves, fluidregulators, air filters, dispense tips, and other accessories tocomplete your Loctite® High Viscosity Paste Pump System.Loctite® High Viscosity Paste PumpComponent DiagramNumber designationhighlights item type in theaccessories chart on page 77.6 61A4ItemNumber3 2B 3RatioOutputperStroke5Material6ContainerMaximumProductViscosity (cP)988715 22:1 6.7 in 3 Carbon Steel 55 Gallon 500,000988716 22:1 6.7 in 3 Carbon Steel 5 Gallon 500,000988717 22:1 6.7 in 3 Inert Metal 55 Gallon 500,000988718 22:1 6.7 in 3 Inert Metal 5 Gallon 500,000988843 22:1 6.7 in 3 Carbon Steel w/Inert Seals 5 Gallon 500,000988846 22:1 6.7 in 3 Carbon Steel w/Inert Seals 55 Gallon 500,000988719 44:1 6.7 in 3 Carbon Steel 55 Gallon 1,000,000988720 44:1 6.7 in 3 Carbon Steel 5 Gallon 1,000,000988721 44:1 6.7 in 3 Inert Metal 55 Gallon 1,000,000988722 44:1 6.7 in 3 Inert Metal 5 Gallon 1,000,000988844 44:1 6.7 in 3 Carbon Steel w/Inert Seals 5 Gallon 1,000,000988847 44:1 6.7 in 3 Carbon Steel w/Inert Seals 55 Gallon 1,000,000988723 64:1 4.6 in 3 Carbon Steel 55 Gallon 4,000,000988724 64:1 4.6 in 3 Carbon Steel 5 Gallon 4,000,000988725 64:1 4.6 in 3 Inert Metal 55 Gallon 4,000,000988726 64:1 4.6 in 3 Inert Metal 5 Gallon 4,000,000988845 64:1 4.6 in 3 Carbon Steel w/Inert Seals 5 Gallon 4,000,000988848 64:1 4.6 in 3 Carbon Steel w/Inert Seals 55 Gallon 4,000,00073Manual System61A32A61D1B452B51B673532A33Automatic System(Secondary Pressure Regulation)1CNOTES: 1. Hoses have Female JIC Swivel Fittiings on both ends. 2. ALL Fittings are stainless steel unless otherwise noted.76For additional information and the full line of equipment, visit www.equipment.loctite.com.

Loctite® Brand Pail Pump AccessoriesItemPRODUCTNumberHIGH VISCOSITY PASTE PUMP COMPONENTS1A1BPUMP PRIMERS1C1DDescription988526 4.25" Air Motor – For 22:1 Systems, 30 to 100 psi988528 6" Air Motor – For 44:1 and 64:1 Systems, 30 to 100 psi988530 CS Pump Tube – For 22:1 and 44:1 Systems988532 Inert Pump Tube – For 22:1 and 44:1 Systems988533 CS Pump Tube – For 64:1 Systems988535 Inert Pump Tube – For 64:1 Systems988837 CS Pump Tube with Inert Seals – For 22:1 and 44:1 Systems988840 CS Pump Tube with Inert Seals – For 64:1 Systems988536 CS, 55 gallon Twin Post Primer988541 Inert, 55 gallon Twin Post Primer988539 CS, 5 gallon Single Post Primer988542 Inert, 5 gallon Single Post PrimerSYSTEM HOSES – All Hoses have Female JIC Swivel Fittings2A2BHOSE FITTINGS – Stainless Steel333SYSTEM ACCESSORIES989103 High Pressure 3/4" x 6' SS, PTFE Lined – 5,000 psi max989104 High Pressure 3/4" x 12' SS, PTFE Lined – 5,000 psi max989105 High Pressure 3/4" x 24' SS, PTFE Lined – 5,000 psi max989106 High Pressure 1" x 6' SS, PTFE Lined – 5,000 psi max989107 High Pressure 1" x 12' SS, PTFE Lined – 5,000 psi max989108 High Pressure 1" x 24' SS, PTFE Lined – 5,000 psi max989109 Medium Pressure Hose 3/8" x 6' – 2,250 psi989110 Medium Pressure Hose 3/8" x 12' – 2,250 psi989111 Medium Pressure Hose 3/8" x 24' – 2,250 psi989112 Medium Pressure Hose 1/2" x 6' – 2,000 psi989113 Medium Pressure Hose 1/2" x 12' – 2,000 psi989114 Medium Pressure Hose 1/2" x 24' – 2,000 psi989115 Medium Pressure Hose 3/4" x 6' – 1,500 psi989116 Medium Pressure Hose 3/4" x 12' – 1,500 psi989117 Medium Pressure Hose 3/4" x 24' – 1,500 psi989118 Medium Pressure Hose 1" x 6' – 1,500 psi989119 Medium Pressure Hose 1" x 12' – 1,500 psi989120 Medium Pressure Hose 1" x 24' – 1,500 psi989121 1" JIC M x 3/4" MNPT Connector989122 3/4" JIC M x 3/4" MNPT Connector989123 3/4" JIC M x 1/2" MNPT Connector989124 1/2" JIC M x 3/4" MNPT Connector989125 1/2" JIC M x 1/2" MNPT Connector989126 1/2" JIC M x 1/4" MNPT Connector989127 3/8" JIC M x 1/2" MNPT Connector989128 3/8" JIC M x 3/8" MNPT Connector989129 3/8" JIC M x 1/4" MNPT Connector989130 3/8" JIC M x 3/8" MNPT Elbow989131 1/2" JIC M x 1/4" MNPT Elbow989132 1/2" JIC M x 1/2" MNPT Elbow989133 3/4" JIC M x 3/4" MNPT Elbow989134 3/4" JIC M x 1/2" MNPT Elbow989135 1" JIC M x 3/4" MNPT Elbow989136 3/4" FNPT x 1/4" MNPT Reducing Adapter989137 3/4" FNPT x 1/2" MNPT Reducing Adapter989138 1/2" FNPT x 1/8" MNPT Reducing Adapter989139 1/2" FNPT x 1/4" MNPT Reducing Adapter989140 3/8" FNPT x 1/8" MNPT Reducing Adapter989141 3/8" FNPT x 1/4" MNPT Reducing Adapter988543 Pump Hoist988545 Pump Stop988547 55 Gallon Drum Cover988548 5 Gallon Pail Cover988551 Low Level Cut-off – 55 Gallon988552 Microswitch – Low Level988554 Wall Mount Kit for Ball ValvesItemPRODUCTNumberDISPENSE VALVESDescriptionMax. InletPressureOperatingPressureInlet/OutletFitting SizeHigh Viscosity Valve –9845944Mountable4000 psi 0 to 4,000 psi 1/4" FNPT x 1/4" FNPT989147High Viscosity Hand Gun –Pistol Grip4000 psi 0 to 4,000 psi 1/4" FNPT x 1/4" FNPT989148High Viscosity Hand Gun –In Line3400 psi 0 to 3,400 psi 1/4" FNPT x 1/4" FNPT983914 Poppet Valve 625 psi 0 to 625 psi 1/4" Tube x 1/8" NPT986300 Poppet Valve 625 psi 0 to 625 psi 1/4" Tube x Bayonet Needle982621 Poppet Valve 625 psi 0 to 625 psi 1/4" Tube x 1/8" NPT97113 Stationary Valve 80 psi 0 to 80 psi 1/4" Tube x 1/4"-2897114 Stationary Valve 80 psi 0 to 80 psi 3/8" Tube x 1/4"-2898009 Light Cure Valve 70 psi 0 to 70 psi 1/8" FNPT x 1/4"-28FLUID PRESSURE REGULATION AND ACCESSORIES989161Primary Fluid RegulatorAssembly5,000 psi250 to4,500 psi3/4" FNPT x 3/4" FNPT989161 INCLUDES THE FOLLOWING ITEMS THAT ARE AVAILABLE INDIVIDUALLY5 989162 Primary Fluid Regulator 5,000 psi250 to4,500 psi3/4" FNPT x 3/4" FNPT989164 Gauge and Isolator Assembly 5,000 psi 0 to 5,000 psi 3/4" MNPT x 3/4" FNPTSecondary Fluid Regulator9891653,625 psi 0 to 725 psi 1/4" MNPT x 1/4" FNPTAssembly989165 INCLUDES THE FOLLOWING ITEMS THAT ARE AVAILABLE INDIVIDUALLY989076Secondary Regulator0 to 1,000 psi3,625 psi 0 to 725 psi 1/4" BSPP Female989166 Gauge and Isolator Assembly 1,000 psi 0 to 1,000 psi 1/8" MBSPP989244Low Viscosity Fluid PumpRegulator1,250 psi 30 to 200 psi 3/8" FNPT x 3/8" FNPT989245Low Viscosity Fluid PumpRegulator & Gauge750 psi 5 to 30 psi 3/8" FNPT x 3/8" FNPT989167989168Particle Filter Assembly –Includes two high pressure 5,000 psigauge assembliesPurge Tube Kit – For Particle Filtration(Includes 2 isolation valves)0 to5,000 psi3/4"FNPT x 3/4" FNPT3/4" MNPT x 3/4"FNPT989388 Mounting bracket – 989161 to 5 gallon primerAIR SUPPLY FILTERS AND FITTINGSAirline Filter/Regulator985397150 psi 0 to 150 psi 1/8" FNPT x 1/8"FNPTwith Pressure Gauge989071 Fitting – 985397 to Primer 3 Way Valve 1/8" MNPT x 1/4"MNPTFRL Air Filter Assembly –989169150 psi 0 to 100 psi 1/2" FNPT x 1/2" FNPTFor Air Motor Inlet989352 Fitting – FRL Outlet to Air Motor Inlet 3/4" MNPT x 1/2" MNPT6989070 Fitting – FRL Inlet to External Air Supply 1/4" MNPT x 1/2" MNPTDISPENSE TIPS989170 1/4" MNPT, 1" long x 0.150" ID7989171 1/4" MNPT, 1" long x 0.094" ID989172 1/4" MNPT, 1" long x 0.063" ID989173 1/4" MNPT, 2.5" long x 0.150" ID989174 1/4" MNPT, 2.5" long x 0.094" ID989175 1/4" MNPT, 2.5" long x 0.063" ID989176 1/8" MNPT, 1" long x 0.150" ID989177 1/8" MNPT, 1" long x 0.094" ID989178 1/8" MNPT, 1" long x 0.063" ID989179 1/8" MNPT, 2.5" long x 0.150" ID989180 1/8" MNPT, 2.5" long x 0.094" ID989181 1/8" MNPT, 2.5" long x 0.063" ID989193 Adapter for 1/8" MNPT Tip Nozzles, 1/8" NPS x 1/4" NPS989182 1.5 mm ID Tapered SS Nozzle, 1/8"-28 BSPP989183 2 mm ID Tapered SS Nozzle, 1/8"-28 BSPP989184 3 mm ID Tapered SS Nozzle, 1/8"-28 BSPP989185 4 mm ID Tapered SS Nozzle, 1/8"-28 BSPP989186 1.5 mm ID Tapered Acetal Copolymer Nozzle, 1/8"-28 BSPP989187 2 mm ID Tapered Acetal Copolymer Nozzle, 1/8"-28 BSPP989188 3 mm ID Tapered Acetal Copolymer Nozzle, 1/8"-28 BSPP989189 4 mm ID Tapered Acetal Copolymer Nozzle, 1/8"-28 BSPP985676 1.5 mm ID Tapered Aluminum Nozzle, 1/8"-28 BSPP989190 2 mm ID Tapered Aluminum Nozzle, 1/8"-28 BSPP989191 3 mm ID Tapered Aluminum Nozzle, 1/8"-28 BSPP989192 4 mm ID Tapered Aluminum Nozzle, 1/8"-28 BSPP1060662 Adapter for 1/8"-28 BSPP Nozzles, 1/8" BSPP x 1/4" NPSDISPENSING Pail PumpsFor additional information and the full line of equipment, visit www.equipment.loctite.com.77

DISPENSINGMonitoring SystemsMonitoringSystemsThese state-of-the-art detection systems allow real time process monitoring of dispensecycles. Whether you’re looking to determine the presence of adhesive via fluorescencedetection, or the amount of adhesive dispensed for an individual dispense nozzle, Henkelhas the system that will get the job done with a high degree of precision and reliability.LOCTITE ® FLUORESCENCE DETECTORItem Number: 98083Designed for the detection of fluorescent adhesives,this unit connects to an in-house power supplyand PLC for monitoring of dispense processesutilizing fluorescent adhesives and sealants.Three interchangeable lenses are available forvarious detection distances. A 100,000 hourLED life ensures consistent and long-termprocess monitoring.Features:• 100,000 hours LED life• 250 microsecond maximum responsetime between detection points• 3 lens options (sold separately) allow forvarious detection distances• Common light output and fluorescence detection path• Equipped with a learn mode feature, allowingthe programming of part detection with minimal effort• NPN and PNP output capability, allowing easy interfaceTheory of OperationAn internal Light Emitting Diode(LED) illuminates adhesives andsealants that contain fluorescentadditives. When adhesive is notdetected on the illuminated part,an analog or digital signal istransmitted to indicate aninsufficient amount. The Loctite®Fluorescence Detector is designedfor easy interface with mostanalog or PNP and NPN digitaldetection systems.DimensionsWeightInput VoltageOutput VoltageNPN/PNP:Response TimeSwitching FrequencyLight SourceSpot SizeParts IncludedTECHNICAL SPECIFICATIONS3.1" L x 2.3" W x 1.2" D0.68 lbs.10 to 30 volts DC current (80 to 300) maAnalog Output 0 to 5.5 volts into 2.2 ohms10 ohms pull up/down resistance250 microsecond maximum2 khzLED 100,000 hours life98102: 9 mm Lens 1 mm Spot98103: 28 mm Lens 10 mm Spot98101: 50 mm Lens 12 mm Spot(1) Fluorescence Detector (Lenses Sold Separately)(1) 4-Conductor Cable with M12 Connector(1) ManualAdditional Accessories Sold Separately98101 –50 mm Lens98102 –9 mm Lens98103 –28 mm Lens986091 – Loctite ® 4-Conductor Cable with M12 connector78For additional information and the full line of equipment, visit www.equipment.loctite.com.

CONSUMABLESConsumables – Dispense AccessoriesDispenseAccessoriesHenkel offers a comprehensive line of Loctite® brand dispense tips, static mix nozzles, and syringebarrel components. Our high precision stainless steel, tapered polyethylene and flexible polypropylenetips all feature a positive locking, helical thread design to ensure the tip will stay intact during thetoughest applications. A wide variety of static mix nozzles are available to meet your two partadhesive dispensing needs. High quality syringe barrels and components will ensure consistentsingle component adhesive dispensing needs are met.High Precision Stainless Steel Dispense Tips1⁄4" STAINLESS STEEL TIPS HELICAL THREAD50 packItem Number1000 packItem NumberHub ColorGauge830740 830703 Olive 1498196 98197 Green 1898198 98199 Pink 2098200 98201 Purple 2198624 98625 Red 2598626 98627 Clear 2798628 98629 Lavender 3098114 98115 Yellow 321 1 ⁄2" STAINLESS STEEL TIPS HELICAL THREAD50 packItem Number1000 packItem NumberHub ColorGauge98163 98164 White 1498165 98166 Amber 1598167 98168 Green 1898169 98170 Pink 2098171 98172 Purple 2198173 98174 Blue 2298175 98176 Orange 2398177 98178 Red 2598179 98180 Light Grey 271⁄2" STAINLESS STEEL TIPS HELICAL THREAD50 packItem Number1000 packItem NumberHub ColorGauge98396 98397 Amber 1598398 98399 Green 1898400 98401 Pink 2098424 98425 Purple 2198402 98403 Blue 2298611 98612 Orange 2398404 98405 Red 2598104 98105 Lavender 3045° BY 1 ⁄2" STAINLESS STEEL TIPS HELICAL THREAD50 packItem Number1000 packItem NumberHub ColorGauge98236 98237 White 1498240 98241 Amber 1598244 98245 Green 1898248 98249 Pink 2098252 98253 Purple 2198256 98257 Blue 2298260 98261 Orange 2398264 98265 Red 2598268 98269 Light Grey 271" STAINLESS STEEL TIPS HELICAL THREAD50 packItem Number1000 packItem NumberHub ColorGauge98216 98217 White 1498218 98219 Amber 1598222 98223 Green 1898224 98225 Pink 2098226 98227 Purple 2198228 98229 Blue 2298230 98231 Orange 2398232 98233 Red 2598234 98235 Light Grey 2790° BY 1 ⁄2" STAINLESS STEEL TIPS HELICAL THREAD50 packItem Number1000 packItem NumberHub ColorGauge98238 98239 White 1498242 98243 Amber 1598246 98247 Green 1898250 98251 Pink 2098254 98255 Purple 2198258 98259 Blue 2298262 98263 Orange 2398266 98267 Red 2598270 98271 Light Grey 2780For additional information and the full line of equipment, visit www.equipment.loctite.com.

Tapered Dispense Tips1 1 ⁄4" POLYETHYLENE TAPERED TIPS HELICALTHREAD AND UV LIGHT BLOCK ADDITIVENEW50 pack Item Number 1000 pack Item Number Hub Color Gauge98385 98386 White 1498387 98388 Grey 1698389 98390 Green 1898391 98392 Pink 2098393 98394 Blue 2298658* 98659* Red 2598660* 98661* Clear 27* New smaller gauge sizes.General Purpose Dispense Tips1⁄2" STAINLESS STEEL TIPS50 pack Item Number 1000 pack Item Number Hub Color Gauge98208 98209 Olive 1497225 98065 Amber 1597226 98066 Green 1897227 98067 Pink 2098210 98211 Purple 2198100 98080 Blue 2298212 98213 Orange 2397228 98068 Red 2598214 98215 Clear 27CONSUMABLES DispenseAccessoriesFlexible Dispense Tips1 1 ⁄2" POLYPROPYLENE TIPS HELICAL THREAD50 pack Item Number 1000 pack Item Number Hub Color Gauge97229 98069 Amber 1597230 98070 Green 1897231 98071 Pink 2097232 98082 Red 25General Purpose Tapered Dispense Tips1 1 ⁄4" POLYETHYLENE TAPERED TIPS50 pack Item Number 1000 pack Item Number Hub Color Gauge98272 98273 Tan 1497221 98061 Grey 1697222 98062 Green 1897223 98063 Pink 2097224 98064 Blue 22Additional Dispense Tips and AccessoriesCartridge AccessoriesLOCTITE ® SHOWCASENEEDLE VARIETY KITItem Number: 98439This kit contains 5 each of anassortment of high precisionStainless Steel tips in variouslengths and gauges. Taperedand Flexible Dispense Tips arealso included. All dispense tipshave helical thread Luer-Lok®hubs for reliable locking.PRODUCT Item # DescriptionPRODUCT Item Numbers Description97238 / 98073 SS, PTFE Lined, 25 Gauge (50/1000 pack)97233Luer-Lok ® Adapter Kit, 20 Luer-Loks ®and 5 adapters97248 / 98499 Tip caps (50/1000 pack)97261 / 9807497262986379751198652High Density Polyethylene, 15 Gauge,White (50/1000 pack)2 each of a variety of Helical Threaded1 ⁄2" Stainless Steel, Tapered Tip, andPolypropylene tipsFormable Dispense Tip, 21 Gauge(100 pack)Tri-Nozzle – Helps eliminate bubbles inanaerobic gasket applicationsLight blocking shield fordispense tips (10 pack)998390 Vari-Drop Applicator Brushes (10 pack)PRODUCT Item # Description98446 Roller Assembly 1" wide band98448 Roller Assembly 2" wide band98447 Replacement Rollers 1" wide (3 pack)98449 Replacement Rollers 2" wide (3 pack)98610 3 ⁄4" wide x 3 ⁄8" NPT Dispense nozzle (10 pack)9721598181984832984833Cartrige-Syringe Adapter: 1 ⁄4" SemcoThread x Female Luer. Used for downloadingCartridge-Tube Fitting Adapter: ( 1 ⁄4" FNPT x 1 ⁄4" maleSemco Thread) Used for connecting tube fittingsto cartridges (984832 or 984833 also requiredand sold separately) (3 pack)Tube Fitting:1 ⁄4" male NPT x 1 ⁄4" feed tube (10 pack)Tube Fitting:1 ⁄4" male NPT x 3 ⁄8" feed tube (10 pack)1044246Aero Nozzle for Silicones in aerosol cans(10 pack)982644Cartridge Adapter: SS, ( 1 ⁄4" FNPT x 1 ⁄4" femaleFischbach Thread), used for connecting tube fittings9812898371Cartridge Dispense Tip: 1 ⁄4" male Semco Thread(10 pack)Cartridge-Needle Adapter: (FemaleLuer x 1 ⁄4" male Semco Thread) Luer-Lok ®adapter for dispense needle attachment (5 pk)10453391044247Cartridge-Needle Adapter: 1 ⁄4" NPT Thread xFemale Luer - shown with 982644 for 1 ⁄4"Fischbach. For needle attachment ( 5 pack)Cartridge-Syringe Adapter: 1 ⁄4" MNPT x FemaleLuer. shown with 982644 for 1 ⁄4" Fischbach.Used for downloading (5 pack)For additional information and the full line of equipment, visit www.equipment.loctite.com.81

CONSUMABLESDispenseAccessoriesLoctite® Brand Static Mix Nozzles and AccessoriesPRODUCTItemNumbers98444983659847398632986229835099862398364PackageQuantity101,000101,000102,000102,00098454 10984559846298463583804104,000101,0001034575 109837398374984749865398667986689845610532629845798464101,000101,00010500102,000101,50098459 10989516 50989518 10918088 1010320261032028101,00098460 109846198409986729843098458970655101,00010500102,00098344 1098467 10984699836798470984769841098477984119847898412101,000Seedescription105001050010500Description50 ml Square Mix Nozzle, Luer/Stepped Combo Tip, 3.25" Overall Length,5.3 mm 2 , 16 elements, 1:1, 2:1 mix ratios.50 ml Square Mix Nozzle, Luer/Stepped Combo Tip, 4.5" Overall Length,5.3 mm 2 , 24 elements, 1:1, 2:1, 4:1 mix ratios.50 ml Mix Nozzle, 5.9" Overall Length, 0.250" ID,Slip-Luer, 20 elements, 1:1, 2:1 and 4:1 ratios.50 ml Mix Nozzle, 5.9" Overall Length, 0.250" ID,Stepped Tip-Luer, 20 elements, 1:1, 2:1 and 4:1 ratios.50 ml Mix Nozzle, Luer Tip, 6.0" Overall Length, 6.0 mm diameter,21 elements, 1:1, 2:1, 4:1 mix ratios.50 ml Mix Nozzle, Stepped Tip, 6.0" Overall Length, 6.0 mm diameter,21 elements, 1:1, 2:1, 4:1 mix ratios.50 ml Mix Nozzle, Stepped Tip, Keyed, 5.9" Overall Length, 5.4 mm diameter,28 elements, 10:1 mix ratio.50 ml-S Mix Nozzle, Stepped Tip, 6.2" Overall Length, 6.5 mm ID,20 elements, 10:1-S cartridges only200/400 ml Square Mix Nozzle, Luer/Stepped Combo Tip, 5.0" Overall Length,5.3 mm 2 , 24 elements, 1:1, 2:1, 4:1 mix ratios.200/400 ml Square Mix Nozzle, Stepped Tip, 5.1" Overall Length, 7.5 mm 2 ,24 elements, 1:1, 2:1 mix ratios.200/400 ml Square Mix Nozzle, Threaded Bell End 10.7 mm square,187 mm Overall Length, 24 elements, 1:1, 2:1 ratios.200/400 ml Mix Nozzle, Stepped Tip, 7.3" Overall Length, 6.3 mm diameter,24 elements, 1:1, 2:1 mix ratios.200/400 ml Mix Nozzle, Stepped Tip, 8.8" Overall Length, 8 mm diameter,24 elements, 1:1, 2:1 mix ratios.200/400 ml Mix Nozzle, Stepped Tip, 10.9" Overall Length, 10 mm diameter,24 elements, 1:1, 2:1 mix ratios.200/400 ml Mix Nozzle, 7.4" Overall Length, 0.188" ID, Stepped Tip,32 Elements, 1:1, 2:1 and 4:1 ratios.200/400 ml Mix Nozzle, 9.0" Overall Length, 0.188" ID, Stepped Tip,48 Elements, 1:1, 2:1 and 4:1 ratios.200/400 ml Mix Nozzle, Luer Tip, 9.5" Overall Length, 0.25" ID, Slip Luer,32 Elements, 1:1 and 2:1 ratios.200/400 ml Mix Nozzle, 11.44" Overall Length, 8 mm diameter,32 elements, 1:1, 2:1 mix ratios.200/400 ml Mix Nozzle, Stepped Tip, Keyed, 9.1" Overall Length, 8 mm diameter,24 elements, 1:1, 2:1 ratios.200/400 ml Mix Nozzle, Stepped Tip, Keyed, 10.8" Overall Length, 10 mm diameter,24 elements, 4:1, 10:1 mix ratios.200/400 ml Mix Nozzle, Stepped Tip, 14.2" Overall Length, 9.3 mm diameter,40 elements, 1:1, 2:1 mix ratios.Luer-Lok ® Adapter for 6.3 and 8 mm Stepped Tip Mix Nozzles, Allows for DispenseNeedle Attachment, (10 pack). Mix Nozzles and Dispense Needles sold separately.Ribbon Tip Adapter, allows Ribbon Tip use with 10 mm.Mix Nozzles 98461, 98459 and 98409, sold separately.200/400 ml Snap Tip Mix Nozzle, 8.9" overall length, 8 mm diameter.24 elements, 1:1, 2:1 mix ratios. For use with Ribbon Tips.200/400 ml Snap Tip Mix Nozzle, 9.3" overall length, 9.3 mm diameter.,24 elements, 1:1, 2:1 mix ratios. For use with Ribbon Tips.Snap Tip Mix Nozzle and Ribbon Tip Sample Kit.Contains: 6 pieces each of: 12, 25, and 43 mm Ribbon Tips3 pieces each of: 8 and 9.3 mm diameter Snap Tip Mix Nozzles12 mm Ribbon Tip. Sold Separately.25 mm Ribbon Tip. Sold Separately.43 mm Ribbon Tip. Sold Separately.82For additional information and the full line of equipment, visit www.equipment.loctite.com.

Loctite® Brand Syringe AccessoriesPRODUCTItemNumbers98656986579720897245Description3 ml Syringe Air Line Adapter5 ml Syringe Air Line Adapter10 ml Syringe Air Line Adapter30 ml and 55 ml Syringe Air Line AdapterContents2 Air Line Adapters –Common to all part numbers(syringe barrel sold separately)CONSUMABLES DispenseAccessories97216 10 ml Syringe Starter Kit97294 30 ml Syringe Starter Kit5 Caps5 Pistons4 Clear Barrels1 Black Barrel5 Tips1 Air Line Adapter98416 55 ml Syringe Starter Kit97207 10 ml Clear Syringe Barrel Kit97244 30 ml Clear Syringe Barrel Kit98314 55 ml Clear Syringe Barrel Kit20 Barrel Caps, 40 Pistons, 40 Barrels,40 Barrel Tips10 Barrel Caps, 20 Pistons, 20 Barrels,20 Barrel Tips5 Barrel Caps, 10 Pistons, 10 Barrels,10 Barrel Tips97263972649831510 ml Black Syringe Barrel Kitfor UV Adhesives30 ml Black Syringe Barrel Kitfor UV Adhesives55 ml Black Syringe Barrel Kitfor UV Adhesives20 Barrel Caps, 40 Pistons, 40 Barrels,40 Barrel Tips10 Barrel Caps, 20 Pistons, 20 Barrels,20 Barrel Tips5 Barrel Caps, 10 Pistons, 10 Barrels,10 Barrel TipsVariousClear or Black3, 5, 10, 30, and 55 ml Piston/SyringeCombination PackagesSee page 85 for syringe and pistonoptions and item numbers.VariousDark Amber Syringe and Piston optionsAvailable upon request. Please contact yourLoctite ® Sales Representative or contact us atwww.equipment.loctite.com.984650Air Line Filter for Syringe Dispensing toprevent product back flow1 Filter Assembly with 2 Hose Crimps984625Loctite ® Vertical Syringe Stand for10 ml and 30 ml syringe barrels(Black)1 Stand(syringe barrel and air line adaptersold separately)98501Loctite ® Applicator Holder for10 ml, 30 ml and 55 ml syringe barrels(Red)1 Holder(syringe barrel and air line adaptersold separately)For additional information and the full line of equipment, visit www.equipment.loctite.com.83

LOCTITE Dispense® BRAND DISPENSINGSPARE Accessories PARTS AND ACCESSORIESPARENT PRODUCTAccessoryItem NumbersDescriptionPackage Quantity39635 – Loctite ® Fixmaster ® Rapid Rubber Repair Dispenser 39633 400 ml mix nozzle, stepped 8 mm end 697001 – Loctite ® Hand Pump, 250 ml97006 – Loctite ® Digital Syringe Dispensing System883976 – Loctite ® Digital Syringe Dispensing System97007 – Loctite ® Integrated Semi-Automatic Controller Dispenser 0-100 psi97010 – Loctite ® Integrated Semi-Automatic Controller Dispenser 0-15 psi97017 – Loctite ® Integrated Semi-Automatic Controller Disp. with Low Level Sensor 0-100 psi97020 – Loctite ® Integrated Semi-Automatic Controller Disp. with Low Level Sensor 0-15 psi97111 – Loctite ® Hand Held Applicator, Manual97112 – Loctite ® Hand Held Applicator, Pneumatic, Foot97116 – Loctite ® Hand Held Applicator, Pneumatic, Finger Switch97113 – Loctite ® Stationary Applicator Valve with 1/4" Feed Line97114 – Loctite ® Stationary Applicator Valve with 3/8" Feed Line993163993174972019025219850198252097251890006489502109722097233972349723597236979999723997240972429729197123 – Loctite ® Single Channel Automatic Controller 97120979609797389504508951124Replacement tubingReplacement nozzleReplacement foot switch for 97006Replacement foot switchApplicator holderUniversal power cordReplacement rupture discTank feed line fittingReplacement reservoir lid o-ring3/8" feed line conversion kitLuer-Lok ® adapter kitReplacement finger lever for 97111Replacement actuator for 97112Replacement actuator for 97116Replacement valve assembly, all applicatorsReplacement shut-off valve assembly for 97113Replacement shut-off valve assembly for 97114Mounting bracketReplacement actuator assemblyAir filter and regulatorPneumatic tubing, 4 mm OD, 33 ft.Pneumatic tubing, 6 mm ODThreaded fitting for pneumatic supply and reservoirThreaded fitting dispensing valves and advancing slide111111111120 Luer-Lok ® , 5 adapters111111197130 – Loctite ® LV Hand Held Applicator 97902 Repair Kit for LV hand held valve N/A1111197132 – Loctite ® Vari-Drop Applicator, without Tubing97249998390Vari-Drop applicator repair kitVari-Drop applicator brushes11097135 – Loctite ® Diaphragm Valve with 1 ⁄4" Feed Line97136 – Loctite ® Diaphragm Valve with 3 ⁄8" Feed Line98009 – Loctite ® Light Cure Dispense Valve98013 – Loctite ® Cyanoacrylate Dispense Valve98011 – Loctite ® Hysol Reactive Urethane Cartridge Dispenser9725497268972699727198528198468498468598428098428198022 – Loctite ® 300 ml Cartridge Pusher 984826984832984833–VariousDiaphragm valve – actuator replacementDiaphragm valve – shut-off – 2 mm replacementDiaphragm Valve – shut-off – 3 mm replacementDiaphragm replacement kitMounting bracketValve rebuild kit – 98009Valve rebuild kit – 98013Pneumatic foot switchVertical standReplacement sleeve kitFitting: 1/4" NPT x 1/4" tube, black plasticFitting: 1/4" NPT x 3/8" tube, black plasticSee Cartridge AccessoriesSee additional Cartridge Accessories - page 8197101 – Loctite ® Digital Dispense Controller 97201 Replacement foot switch assembly 11022006 – Loctite ® Digital Multi-Functional Controller98079 – Loctite ® Shot Miser Valve Controller98469197201104424898126986264Advancing slide (2" stroke)Replacement foot switch assembly2-Hand anti-tie-down switch setFoot pedal with fitting and tubingSolenoid valve, 4 way98084 – Loctite ® Micro Needle Valve 98091 Micro needle valve rod replacement kit N/A98085 – Loctite ® Shot Miser Dispense Valve 971329724999324799756998090 – Loctite ® Shot Miser Reservoir, 1 Liter 98094981299813098305598468799264199731298359 – Loctite ® 2.25 Gallon Pressure Reservoir 983609836198362983639837598378 – Loctite ® Posi-Link 5-25 Actuator 98975398975498975598379 – Loctite ® Posi-Link 10-50 ActuatorVari-Drop without tubing and guardsVari-Drop repair kitNut and sleeve sub-assemblySilicone grease, 6 gram tubeToggle valve – 3 wayPressure regulatorPressure gaugeReservoir lid o-ring for acetone based primersAnti-bubbler kitPressure safety relief valveReplacement reservoir lid o-ringPressure safety relief valvePressure regulatorPressure gaugeReservoir lid gasket; material: Buna NReservoir lid gasket; material: EPRLoctite ® 5-25, 5 ml Barbed PistonLoctite ® 5-25, 10 ml Barbed PistonLoctite ® 5-25, 25 ml Barbed PistonLoctite ® 10-50, 10 ml Barbed PistonLoctite ® 10-50, 25 ml Barbed Piston98641 – Loctite ® Posi-Link 10-50, 50 ml Dual Cartridge Nest 989748 Cartridge cradle 298380 – Loctite ® Posi-Link 200-400 Actuator 97141 Static mixer pinch valve 1989751989752111101111111010–Various1111111111111211111111111184

AccessoryPARENT PRODUCTItem Numbers98520 – Loctite ® Spray Valve 98926898926998927098927198927298927398548 – Loctite ® Benchtop Peristaltic Dispenser 869401869402910276936680936701936702937394941765989937989402989403989404989400989401DescriptionSpray nozzle kit – 0.014 diameterSpray nozzle kit – 0.028 diameterSpray nozzle kit – 0.046 diameterSpray valve seal kitSpray valve hose and fitting kitSpray valve – piston repair kitFeed line tubing 2.0 mm OD x 1.4 mm ID, clearFeed line tubing 1.6 mm OD x 1.0 mm ID, clearFeed line tubing 1.6 mm OD x 1.0 mm ID, blackFeed line tubing 2.0 mm OD x 1.4 mm ID, blackFeed line tubing 3.0 mm OD x 1.9 mm ID, clearFeed line tubing 3.0 mm OD x 2.4 mm ID, clearFeed line tubing 3.0 mm OD x 2.4 mm ID, blackFeed line tubing 2.5 mm OD x 1.9 mm ID, blackApplicator nozzle – 1.2 mm IDApplicator nozzle – 1.4 mm IDApplicator nozzle – 1.9 mm IDApplicator nozzle – 2.4 mm IDApplicator assembly 989400Pump headVari-Drop applicatorVari-Drop applicator repair kitReservoir lid o-ring200 g gel tube kitPackage Quantity1111111 x 65.6'1 x 65.6'1 x 65.6'1 x 65.6'1 x 65.6'1 x 65.6'1 x 65.6'1 x 65.6'1111111111LOCTITE ® BRAND DISPENSINGDispenseSPARE PARTS AND ACCESSORIESAccessories982719 – Loctite ® Bond-A-Matic ® 3000 Dispenser, 0-15 psi982722 – Loctite ® Bond-A-Matic ® 3000 Dispenser, 0-100 psi9713297249981880982450982720 – Loctite ® Bond-A-Matic ® 3000 Reservoir, 0-15 psi with Low Level Sensor DC982721 – Loctite ® Bond-A-Matic ® 3000 Reservoir, 0-15 psi with Low Level Sensor AC982723 – Loctite ® Bond-A-Matic ® 3000 Reservoir, 0-100 psi with Low Level Sensor DC982724 – Loctite ® Bond-A-Matic ® 3000 Reservoir, 0-100 psi with Low Level Sensor AC982726 – Loctite ® Bond-A-Matic ® 3000 Reservoir, 0-15 psi, No Applicator982727 – Loctite ® Bond-A-Matic ® 3000 Reservoir, 0-100 psi, No Applicator981880982450982716982732Replacement reservoir lid o-ring200 g gel tube kitReplacement 110 VAC sensor, 982721, 982724 onlyReplacement 24 VDC sensor, 982720, 982723 only1111982880 – Loctite ® 4 Liter Gravity Feed Reservoir983330 – Loctite ® Positive Displacement Pump986000 – Loctite ® Pump-A-Bead II Dispenser983914 – Loctite ® Poppet Valve, Acetal Copolymer Body986300 – Loctite ® Poppet Valve, Acetal Copolymer Body998400 – Loctite ® Dial-A-Seal ® ApplicatorLoctite ® Syringe Barrel and Piston Kits(Dark Amber Syringes are also available in thesame packages. Call 860-571-5174 for special orders.)Syringe Barreland PistonSyringe BarrelOnlyPistons Only98273298288198311698311798325598602598603598606098630098602598603598606098630198309599840299842599842698479984809848198482984839848498485984869848798488984899849098491984929849398494984959849698497984989865598557985769855998578985619812298563985819856598125985849812798587Loctite ® Tubing 979709797298182198186698199498468824 VDC sensorReplacement reservoir bodyReplacement actuator assemblyReplacement pump assemblyPump replacementNozzle: 0.025" diameterNozzle: 0.035" diameterNozzle: 0.060" diameterReplacement poppet valveNozzle: 0.025" diameterNozzle: 0.035" diameterNozzle: 0.060" diameterValve rebuild kitTube adapterPump rebuild kitReplacement turretReplacement cap – 1 liter bottle3 ml syringe barrel and piston, natural3 ml syringe barrel and piston, natural3 ml syringe barrel and piston, black3 ml syringe barrel and piston, black5 ml syringe barrel and piston, natural5 ml syringe barrel and piston, natural5 ml syringe barrel and piston, black5 ml syringe barrel and piston, black10 ml syringe barrel and piston, natural10 ml syringe barrel and piston, natural10 ml syringe barrel and piston, black10 ml syringe barrel and piston, black30 ml syringe barrel and piston, natural30 ml syringe barrel and piston, natural30 ml syringe barrel and piston, black30 ml syringe barrel and piston, black55 ml syringe barrel and piston, natural55 ml syringe barrel and piston, natural55 ml syringe barrel and piston, black55 ml syringe barrel and piston, black3 ml syringe barrel, black3 ml syringe barrel, natural5 ml syringe barrel, black5 ml syringe barrel, natural10 ml syringe barrel, black10 ml syringe barrel, natural30 ml syringe barrel, black30 ml syringe barrel, natural55 ml syringe barrel, black55 ml syringe barrel, natural3 ml syringe piston5 ml syringe piston10 ml syringe piston30 / 55 ml piston3 ⁄8" black PTFE lined feed tube1 ⁄4" black PTFE lined feed tube1 ⁄4" clear polyethylene feed tube3 ⁄8" clear polyethylene feed tube1 ⁄4" clear nylon feed tube for Pump-A-Bead Silicone tubing for dispense valve purging (10 pack)11111111111111111501,000501,000501,000501,000501,000501,000505005050025050502501,0001,0001,0001,0001,0001,0005005002502501,0001,0001,0001,00033 feet33 feet33 feet33 feet33 feet1 foot85

MOTIONCONTROLMotion ControlRobot Dispense SystemsRobot DispenseSystemsAvailable in both Benchtop and SCARA model types, Loctite® brand robots are designed tosimplify the dispensing of adhesives and sealants onto complex surface configurations. Theyallow manufacturers to repeatedly and reliably dispense patterns of liquid material on aprogrammed basis, resulting in improved process efficiencies, minimal material waste, andreduced manufacturing costs.Robot TypesBenchtop robots are beam or gantry style robots designed to be placed on a bench. These robots carry oneor more parts that are captured in a fixture that is mounted on the work surface. Motion in the X axis isachieved by moving the work surface forward and backward. The Y and Z axes are achieved by moving thetool head left and right and up and down, respectively, on the beam or gantry. When applicable, the 4th axis(R axis) is achieved by rotating the mounting shaft that protrudes from the tool head.SCARA is an acronym for Selective Compliance Assembly Robot Arm. The robot is a multi-jointed arm thatmoves above the work surface. It must be mounted near the work surface by the user. The X and Y axes areachieved by changing the angles of the two arms. This creates a kidney shaped dispensing area that isapproximately 880 mm (34.6") wide and 440 mm (17.3") tall at the center. The Z axis is achieved by movingboth arms up and down. On the 4 axis models, the R axis is achievedby rotating the mounting shaft thatprotrudes from the end of the arm.For detailed dimension drawings of allbenchtop robots, please visit the web at:Just search on the part number you are interestedin and scroll down to the product documentation.PRODUCTLoctite ® 200 BenchtopRobot StationLoctite ® 300 BenchtopRobot StationLoctite ® 400 BenchtopRobot StationLoctite ® 500 BenchtopRobot StationLoctite ® S440 SCARA-NRobot StationType Benchtop Benchtop Benchtop Benchtop SCARANumber ofcontrollable axes3 or 4 3 or 4 3 or 4 3 or 4 3 or 4X axis 200 mm 300 mm 400 mm 510 mm Arm 1: 260 mm ± 90°Range of Y axis 200 mm 320 mm 400 mm 510 mm Arm 2: 180 mm ± 150°operation Z axis 50 mm 100 mm 150 mm 150 mm 100 mmR axis ± 360° ± 360° ± 360° ± 360° ± 360°PortableweightlimitationsSpeedWorkSurface7.0 kg 11.0 kg 11.0 kg 11.0 kg N/ATool Head 3.5 kg 6.0 kg 6.0 kg 6.0 kg 5.0 kgPTP (X, Y) 5 to 700 mm/s 8 to 800 mm/s 8 to 800 mm/s 8 to 800 mm/s 15 to 1500 mm/sPTP (Z) 5 to 250 mm/s 3.2 to 320 mm/s 3.2 to 320 mm/s 3.2 to 320 mm/s 3.2 to 320 mm/sPTP (R) 6 to 600 °/s 8 to 800 °/s 8 to 800 °/s 8 to 800 °/s 10 to 1,000 °/sCP (X, Y, Z) 0.1 to 500 mm/s 0.1 to 800 mm/s 0.1 to 800 mm/s 0.1 to 800 mm/s 0.1 to 800 mm/s86For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITE ® 200 BENCHTOP ROBOT STATIONThe Loctite® 200 Series Benchtop Robot has a 200 by 200 mm range of operation. Eight different configurations,as shown in the chart, are available to meet your process requirements. This unit is fully compliantwith RIA (Robotics Industry Association) safety guidelines. Programming accessories,dispensing equipment, integration cables and mounting hardware are sold separately.Robot ConfigurationsItem Number98279A98280A98281A98282A98283A98284A98285A98286ADescription200 x 200 mm, 3 axis, 110 V200 x 200 mm, 3 axis, 110 V CE Rated200 x 200 mm, 3 axis, 220 V200 x 200 mm, 3 axis, 220 V CE Rated200 x 200 mm, 4 axis, 110 V200 x 200 mm, 4 axis, 110 V CE Rated200 x 200 mm, 4 axis, 220 V200 x 200 mm, 4 axis, 220 V CE RatedMOTIONCONTROLRobot DispenseSystemsFeatures:• Integrated solution – plug and play• Low cost operation and ownership• Compact size• Application specific software• Teach point programming• 255 program, 30,000 point memory card• A wide variety of mounting hardware is available, see page 95.ProgrammingSimple to program using either a multi-line backlit teachpendant with user-friendly prompts or Windows® XP software.The program allows for continuous path motion andautomatically interpolates any line or arc in all axes.The manual provides step-by-step instructions forprogramming the robot. No previous experience is required.Programming AccessoriesThe specially designed, easy-to-use Teach Pendant is thepreferred device for programming and operating the robot.A laptop computer loaded with the Teach Point Software canalso be used as an alternative.989657 – Teach Pendant 989656 – LR-C Teach Point SoftwareIntegration AccessoriesLoctite® brand cables and junction boxes provide plug andplay integration solutions for a variety of Loctite® dispensingsystems. Single or multiple systems functionality can beeasily accommodated.98395 – Interface Cable – Benchtop Robots, 37 pin male D x multi.Use with all Loctite® Robot single dispenser integration.Integrates Loctite® Precision Syringe Dispenser (97006),Digital Syringe Dispenser (883976), Spray Controller (98521),Integrated Semi-Auto Controllers (97007, 97010, 97017,97020), Benchtop Peristaltic Dispenser (98548),and Posi-Link Controller (98377).98549 – Robot Interface Junction Box. Provides convenientconnection point between robots and up to 12 externaldevices including all Loctite® dispensers, UV Wands, LEDcure systems, and 3rd party solenoids, grippers, etc. TheJunction Box accepts up to 7 inputs and 5 outputs, devicestatus indicator lights with a view window, and a 500ma/24 VDC power supply for powering 3rd party devices.Connection of the Junction Box to the Benchtop Robot requiresone additional cable (sold separately)989434 – Junction Box Cable, Benchtop Robots, 37 pin maleD x 37 pin male DTECHNICAL SPECIFICATIONSAttributeValueNumber of Controllable Axes 3 to 4X axis200 mmRange ofY axis200 mmOperationZ axis50 mmR axis ± 360°Portable WeightWork Surface7.0 kgTool Head3.5 kgPTP (X,Y)5 to 700 mm/sSpeedPTP (Z)2.5 to 250 mm/sPTP (R)6 to 600 °/sCP (X,Y, Z)5 to 200 mm/sRepeatabilityX, Y, Z axis ± 0.01 mmAccuracyR axis ± 0.02°CPU32 bitControl MethodPoint-to-Point or Continuous PathDrive Method5-phase stepping motorI/O 16Program Capacity255 programsData Memory Capacity30,000 pointsWidth, 3 axis320 mmWidth, 4 axis330 mmDimensionsDepth388 mmHeight, 3 axis536 mmHeight, 4 axis575 mmWeight18 kgPower Source110/220 VAC; 50/60 HzConsumption Current200 VAWorkingTemperature 0 to 40°CEnvironmentHumidity20 to 95% RHParts Included (1) Teach Pendant By-Pass Connector (1) Robot(1) External Interlock By-Pass Connector (1) Power Cord(1) CD-ROM Manual and LR-C Points Limited SoftwareAdditionalInformationAdditional AccessoriesSold SeparatelyExtensive Mounting Hardware Option Listing on page 95. Seewww.equipment.loctite.com for Detailed Dimension drawings.988000 – Solenoid Valve Module for pneumaticcontrol by the robot98648 – PC Interface Cable – Benchtop Robots,9 pin female D x 9 pin female D87

MOTIONCONTROLRobot DispenseSystemsLOCTITE ® 300 BENCHTOP ROBOT STATIONThe Loctite® 300 Series Benchtop Robot has a 300 by 320 mm range of operation. Eight differentconfigurations, as shown in the chart, are available to meet your process requirements. This unit isfully compliant with RIA (Robotics Industry Association) safety guidelines. Programming accessories,dispensing equipment, integration cables and mounting hardware are sold separately.Robot ConfigurationsItem Number98287A98288A98289A98290A98291A98292A98293A98294ADescription300 x 320 mm, 3 axis, 110 V300 x 320 mm, 3 axis, 110 V CE Rated300 x 320 mm, 3 axis, 220 V300 x 320 mm, 3 axis, 220 V CE Rated300 x 320 mm, 4 axis, 110 V300 x 320 mm, 4 axis, 110 V CE Rated300 x 320 mm, 4 axis, 220 V300 x 320 mm, 4 axis, 220 V CE RatedFeatures:• Integrated solution – plug and play• Low cost operation and ownership• Compact size• Application specific software• Teach point programming• 255 program, 30,000 point memory card• A wide variety of mounting hardware is available, see page 95.ProgrammingSimple to program using either a multi-line backlit teachpendant with user-friendly prompts or Windows® XP software.The program allows for continuous path motion andautomatically interpolates any line or arc in all axes. The manualprovides step-by-step instructions for programming the robot.No previous experience is required.Programming AccessoriesThe specially designed, easy-to-use Teach Pendant is thepreferred device for programming and operating the robot.A laptop computer loaded with the Teach Point Software canalso be used as an alternative.989657 – Teach Pendant 989656 – LR-C Teach Point SoftwareIntegration AccessoriesLoctite® brand cables and junction boxes provide plug andplay integration solutions for a variety of Loctite® dispensingsystems. Single or multiple systems functionality can beeasily accommodated.98395 – Interface Cable – Benchtop Robots, 37 pin male D x multi.Use with all Loctite® Robot single dispenser integration.Integrates Loctite® Precision Syringe Dispenser (97006),Digital Syringe Dispenser (883976), Spray Controller (98521),Integrated Semi-Auto Controllers (97007, 97010, 97017,97020), Benchtop Peristaltic Dispenser (98548),and Posi-Link Controller (98377).98549 – Robot Interface Junction Box. Provides convenientconnection point between robots and up to 12 externaldevices including all Loctite® dispensers, UV Wands, LEDcure systems, and 3rd party solenoids, grippers, etc. TheJunction Box accepts up to 7 inputs and 5 outputs, devicestatus indicator lights with a view window, and a 500ma/24 VDC power supply for powering 3rd party devices.Connection of the Junction Box to the Benchtop Robot requiresone additional cable (sold separately)989434 – Junction Box Cable, Benchtop Robots,37 pin male D x 37 pin male DTECHNICAL SPECIFICATIONSAttributeValueNumber of Controllable Axes 3 to 4X axis300 mmRange ofY axis320 mmOperationZ axis100 mmR axis ± 360°Portable WeightWork Surface11.0 kgTool Head6.0 kgPTP (X,Y)8 to 800 mm/sSpeedPTP (Z)3.2 to 320 mm/sPTP (R)8 to 800 °/sCP (X,Y, Z)0.1 to 800 mm/sRepeatabilityX, Y, Z axis ± 0.01 mmAccuracyR axis ± 0.02°CPU32 bitControl MethodPoint-to-Point or Continuous PathDrive Method5-phase stepping motorI/O 16Program Capacity255 programsData Memory Capacity30,000 pointsWidth560 mmDimensionsDepth529 mmHeight, 3 axis649 mmHeight, 4 axis690 mmWeight35 kgPower Source110/220 VAC; 50/60 HzConsumption Current200 VAWorkingTemperature 0 to 40°CEnvironmentHumidity20 to 95% RHParts Included (1) Teach Pendant By-Pass Connector (1) Robot(1) External Interlock By-Pass connector (1) Power Cord(1) CD-ROM Manual and LR-C Points Limited SoftwareAdditionalInformationAdditional AccessoriesSold SeparatelyExtensive Mounting Hardware Option Listing on page 95. Seewww.equipment.loctite.com for Detailed Dimension drawings.988000 – Solenoid Valve Module for pneumaticcontrol by the robot8898648 – PC Interface Cable – Benchtop Robots,9 pin female D x 9 pin female D

LOCTITE ® 400 BENCHTOP ROBOT STATIONThe Loctite® 400 Series Benchtop Robot has a 400 by 400 mm range of operation. Eight different configurations, as shown in thechart, are available to meet your process requirements. This unit is fully compliant with RIA (Robotics Industry Association) safetyguidelines. Programming accessories, dispensing equipment, integration cables and mounting hardware are sold separately.MOTIONCONTROLRobot ConfigurationsItem Number98295A98296A98297A98298A98299A98300A98301A98302ADescription400 x 400 mm, 3 axis, 110 V400 x 400 mm, 3 axis, 10 V CE Rated400 x 400 mm, 3 axis, 220 V400 x 400 mm, 3 axis, 220 V CE Rated400 x 400 mm, 4 axis, 110 V400 x 400 mm, 4 axis, 110 V CE Rated400 x 400 mm, 4 axis, 220 V400 x 400 mm, 4 axis, 220 V CE RatedRobot DispenseSystemsFeatures:• Integrated solution – plug and play• Low cost operation and ownership• Compact size• Application specific software• Teach point programming• 255 program, 30,000 point memory card• A wide variety of mounting hardware is available, see page 95.ProgrammingSimple to program using either a multi-line backlit teachpendant with user-friendly prompts or Windows® XP software.The program allows for continuous path motion andautomatically interpolates any line or arc in all axes. Themanual provides step-by-step instructions for programmingthe robot. No previous experience is required.Programming AccessoriesThe specially designed, easy-to-use Teach Pendant is thepreferred device for programming and operating the robot.A laptop computer loaded with the Teach Point Software canalso be used as an alternative.989657 – Teach Pendant 989656 – LR-C Teach Point SoftwareIntegration AccessoriesLoctite® brand cables and junction boxes provide plug andplay integration solutions for a variety of Loctite® dispensingsystems. Single or multiple systems functionality can beeasily accommodated.98395 – Interface Cable – Benchtop Robots, 37 pin male D x multi.Use with all Loctite® Robot single dispenser integration.Integrates Loctite® Precision Syringe Dispenser (97006),Digital Syringe Dispenser (883976), Spray Controller (98521),Integrated Semi-Auto Controllers (97007, 97010, 97017,97020), Benchtop Peristaltic Dispenser (98548),and Posi-Link Controller (98377).98549 – Robot Interface Junction Box. Provides convenientconnection point between robots and up to 12 externaldevices including all Loctite® dispensers, UV Wands, LEDcure systems, and 3rd party solenoids, grippers, etc. TheJunction Box accepts up to 7 inputs and 5 outputs, devicestatus indicator lights with a view window, and a 500ma/24 VDC power supply for powering 3rd party devices.Connection of the Junction Box to the Benchtop Robot requiresone additional cable (sold separately)989434 – Junction Box Cable, Benchtop Robots,37 pin male D x 37 pin male D98648 – PC Interface Cable – Benchtop Robots,9 pin female D x 9 pin female DTECHNICAL SPECIFICATIONSAttributeValueNumber of Controllable Axes 3 to 4X axis400 mmRange ofY axis400 mmOperationZ axis150 mmR axis ± 360°Portable WeightWork Surface11.0 kgTool Head6.0 kgPTP (X,Y)8 to 800 mm/sSpeedPTP (Z)3.2 to 320 mm/sPTP (R)8 to 800 °/sCP (X,Y, Z)0.1 to 800 mm/sRepeatabilityX, Y, Z axis ± 0.01 mmAccuracyR axis ± 0.02°CPU32 bitControl MethodPoint-to-Point or Continuous PathDrive Method5-phase stepping motorI/O 16Program Capacity255 programsData Memory Capacity30,000 pointsWidth584 mmDimensionsDepth629 mmHeight, 3 axis799 mmHeight, 4 axis840 mmWeight42 kgPower Source110/220 VAC; 50/60 HzConsumption Current200 VAWorkingTemperature 0 to 40°CEnvironmentHumidity20 to 95% RHParts Included (1) Teach Pendant By-Pass Connector (1) Robot(1) External Interlock By-Pass Connector (1) Power Cord(1) CD-ROM Manual and LR-C Points Limited SoftwareAdditionalInformationAdditional AccessoriesSold SeparatelyExtensive Mounting Hardware Option Listing on page 95. Seewww.equipment.loctite.com for Detailed Dimension drawings.988000 – Solenoid Valve Module for pneumaticcontrol by the robot89

MOTIONCONTROLLOCTITE ® 500 BENCHTOP ROBOT STATIONThe Loctite® 500 Series Benchtop Robot has a 510 by 510 mm range of operation. Eight different configurations, as shown in thechart, are available to meet your process requirements. This unit is fully compliant with RIA (Robotics Industry Association) safetyguidelines. Programming accessories, dispensing equipment, integration cables and mounting hardware are sold separately.Robot ConfigurationsRobot DispenseSystemsItem Number Description98602 510 x 510 mm, 3 axis, 110 V98603 510 x 510 mm, 3 axis, 110 V CE Rated98604 510 x 510 mm, 3 axis, 220 V98605 510 x 510 mm, 3 axis, 220 V CE Rated98606 510 x 510 mm, 4 axis, 110 V98607 510 x 510 mm, 4 axis, 110 V CE Rated98608 510 x 510 mm, 4 axis, 220 V98609 510 x 510 mm, 4 axis, 220 V CE RatedFeatures:• Integrated solution – plug and play• Low cost operation and ownership• Compact size• Application specific software• Teach point programming• 255 program, 30,000 point memory card• A wide variety of mounting hardware is available, see page 95.ProgrammingSimple to program using either a multi-line backlit teachpendant with user-friendly prompts or Windows®XP software.The program allows for continuous path motion andautomatically interpolates any line or arc in all axes. Themanual provides step-by-step instructions for programmingthe robot. No previous experience is required.Programming AccessoriesThe specially designed, easy-to-use Teach Pendant is thepreferred device for programming and operating the robot.A laptop computer loaded with the Teach Point Software canalso be used as an alternative.989657 – Teach Pendant 989656 – LR-C Teach Point SoftwareIntegration AccessoriesLoctite® brand cables and junction boxes provide plug and playintegration solutions for a variety of Loctite® dispensing systems.Single or multiple systems functionality can be easilyaccommodated.98395 – Interface Cable – Benchtop Robots, 37 pin male D x multi.Use with all Loctite® Robot single dispenser integration.Integrates Loctite® Loctite® Precision Syringe Dispenser(97006), Digital Syringe Dispenser (883976), Spray Controller(98521), Integrated Semi-Auto Controllers, (97007, 97010,97017, 97020), Benchtop Peristaltic Dispenser (98548),and Posi-Link Controller (98377)98549 – Robot Interface Junction Box. Provides convenient connectionpoint between robots and up to 12 external devices includingall Loctite® dispensers, UV Wands, LED cure systems, and 3rdparty solenoids, grippers, etc. The Junction Box accepts up to7 inputs and 5 outputs, device status indicator lights with aview window, and a 500 ma/24 VDC power supply forpowering 3rd party devices.Connection of the Junction Box to the Benchtop Robot requiresone additional cable (sold separately)989434 – Junction Box Cable, Benchtop Robots,37 pin male D x 37 pin male D98648 – PC Interface Cable – Benchtop Robots,9 pin female D x 9 pin female DTECHNICAL SPECIFICATIONSAttributeValueNumber of Controllable Axes 3 to 4X axis510 mmRange ofY axis510 mmOperationZ axis150 mmR axis ± 360°PortableWork Surface11.0 kgWeightTool Head6.0 kgPTP (X,Y)8 to 800 mm/sSpeedPTP (Z)3.2 to 320 mm/sPTP (R)8 to 800 °/sCP (X,Y, Z)0.1 to 800 mm/sRepeatabilityX, Y, Z axis ± 0.01 mmAccuracyR axis ± 0.02°CPU32 bitControl MethodPoint-to-Point or Continuous PathDrive Method5-phase stepping motorI/O 16Program Capacity255 programsData Memory Capacity30,000 pointsWidth676 mmDimensionsDepth728 mmHeight, 3 axis799 mmHeight, 4 axis840 mmWeight42 kgPower Source110/220 VAC; 50/60 HzConsumption Current200 VAWorkingTemperature 0 to 40°CEnvironmentHumidity20 to 95% RHParts Included (1) Teach Pendant By-Pass Connector (1) Robot(1) External Interlock By-Pass Connector (1) Power Cord(1) CD-ROM Manual and LR-C Points Limited SoftwareAdditionalInformationAdditional AccessoriesSold SeparatelyExtensive Mounting Hardware Option Listing on page 95. Seewww.equipment.loctite.com for Detailed Dimension drawings.988000 – Solenoid Valve Module for pneumaticcontrol by the robot90

LOCTITEHeading ® S440 SERIES SCARA-N ROBOT– Epoxy & Urethane AdhesivesThe Loctite® S440 Series SCARA-N Robot provides maximum flexibility for complex dispensing applications. The robot features amulti-jointed arm that moves above the work surface. The robot dispensing area is a kidney shaped area determined by the twoarm lengths. Eight different configurations, as shown in the chart, are available to meet your process requirements. Programmingaccessories, dispensing equipment, cables and mounting hardware are sold separately.Robot ConfigurationsThe complete source on Loctite® brand adhesives, sealants, lubricants,Item Number10083511008340DescriptionSCARA-N, 440 mm, 3 axis, 110 VSCARA-N, 440 mm, 3 axis, 110 V CE Ratedcoatings,dispensing andcuring equipment1008339 SCARA-N, 440 mm, 3 axis, 220 Vavailable only from1008552 SCARA-N, 440 mm, 3 axis, 220 V CE RatedHenkel1008338 SCARA-N, 440 mm, 4 axis, 110 V1008337 SCARA-N, 440 mm, 4 axis, 110 V CE Rated1008336 SCARA-N, 440 mm, 4 axis, 220 V1008335 SCARA-N, 440 mm, 4 axis, 220 V CE RatedMOTIONCONTROLRobot DispenseSystemsFeatures:• Integrated solution – plug and play• Low cost operation and ownership• Compact size• Application specific software• Teach point programming• 25 program, 30,000 point memory card• A wide variety of mounting hardware is available, see page 95.ProgrammingSimple to program using either a multi-line backlit teachpendant with user-friendly prompts or Windows® XP software.The program allows for continuous path motion andautomatically interpolates any line or arc in all axes.The manual provides step-by-step instructions forprogramming the robot. No previous experience is required.Programming AccessoriesThe operations box is required. The specially designed, easy-touseTeach Pendant is the preferred device for programming andoperating the robot. A laptop computer loaded with the TeachPoint Software can also be used as an alternative.987512 – Operations Box 1015106 – Teach Pendant989656 – LR-C Teach Point SoftwareIntegration AccessoriesLoctite® brand cables and junction boxes provide plug andplay integration solutions for a variety of Loctite® dispensingsystems. Single or multiple systems functionality can beeasily accommodated.98395 – Interface Cable – SCARA Robots, 37 pin male D x multi.Use with all Loctite® Robots single dispenser integration.Integrates Loctite® Loctite® Precision Syringe Dispenser(97006), Digital Syringe Dispenser (883976), Spray Controller(98521), Integrated Semi-Auto Controllers (97007, 97010,97017, 97020), Benchtop Peristaltic Dispenser (98548), andPosi-Link Controller (98377).98549 – Robot Interface Junction Box. Provides convenientconnection point between robots and up to 12 externaldevices including all Loctite® dispensers, UV Wands, LEDcure systems, and 3rd party solenoids, grippers, etc. TheJunction Box accepts up to 7 inputs and 5 outputs, devicestatus indicator lights with a view window, and a 500ma/24 VDC power supply for powering 3rd party devices.Connection of the Junction Box to the SCARA Robot requiresone additional cable (sold separately)989434 – Junction Box Cable, SCARA Robots,37 pin male D x 25 pin female D98648 – PC Interface Cable – Benchtop Robots,9 pin female D x 9 pin female DTECHNICAL SPECIFICATIONSAttributeValueNumber of Controllable Axes 3 to 4X axis 260 mm ± 90°Range ofY axis 180 mm ± 150°OperationZ axis100 mmR axis ± 360°Portable Weight Tool Head 5.0 kgPTP (X,Y)15 to 1,500 mm/sSpeedPTP (Z)3.2 to 320 mm/sPTP (R)1 to 1,000 °/sCP (X,Y, Z)0.1 to 800 mm/sRepeatabilityX, Y, Z axis ± 0.01 mmAccuracyR axis ± 0.02°CPU32 bitControl MethodPoint-to-Point or Continuous PathDrive Method5-phase stepping motorI/O16 + 8 + SafetyProgram Capacity255 programsData Memory Capacity30,000 pointsWidth290 mmDimensionsDepth773 mmHeight840 mmWeight41 kgPower Source110/220 VAC; 50/60 HzConsumption Current200 VAWorkingTemperature 0 to 40°CEnvironmentHumidity20 to 95% RHParts Included(1) Power Cord (1) Robot (1) I/O-S Short Plug(1) CD-ROM Manual and LR-C Points Limited SoftwareAdditionalInformationAdditional AccessoriesSold SeparatelyExtensive Mounting Hardware Option Listing on page 95. Seewww.equipment.loctite.com for Detailed Dimension drawings.988000 – Solenoid Valve Module for pneumaticcontrol by the robot91

MOTIONCONTROLDispense StationsDispense StationsWhen a circular dispense pattern or an advancing dispense valve isrequired, Loctite® brand motion control systems offer robust performanceat a lower cost than robotic dispense stations. They are simple to set up andoperate and their rugged construction makes them well suited for harshmanufacturing environments.In less complex applications, when a circular dispense pattern oran advancing dispense valve is required, Loctite® brand motioncontrol systems offer robust performance at a lower cost thanrobotic dispense stations.PRODUCTDispense PatternLoctite ® Advancing SlideDispense StationLoctite ® Single RotaryDispense StationLoctite ® Dual RotaryDispense StationItem Number 98426 98427 98428Dots or PottingCircles, Arcs and/or Dots ina Circular PatternCircles, Arcs and/or Dots ina Circular PatternNumber of Dispense Points 1 1 2Minimum Dispense Time 0.1 seconds 0.01 seconds 0.01 secondsAdjustable Valve Angle Yes Yes YesSlide Stroke 0 to 2" 0 to 2" 0 to 2"Fluid Pressure Regulation 0 to 90 psi 0 to 90 psi 0 to 90 psiMaximum Part Size 1 N/A 8.5" Diameter4" Diameter at 90°6" Diameter at 45°Maximum Part Height 1 12" 12" 8"Weight Capacity 2 N/A 30 lbs. 30 lbs.Rotating Speed N/A 0.1 to 100 RPM 0.1 to 100 RPMProgrammingProgram Capacity4 Adjustable RangeAnalog TimersN/AMulti-line Digital ControlPanel with User Friendly Prompts10 Programs, 20 Eventsper ProgramMulti-line Digital ControlPanel with User Friendly Prompts10 Programs, 20 Eventsper ProgramWidth 12" 14.125" 14.1"Dimensions Depth 14.75" 11.5625" 11.6"Height 28" 28.7" 23.9"Weight 25 lbs. 26 lbs. 25 lbs.Power Source 110/220 VAC; 50/60 Hz 110/220 VAC; 50/60 Hz 110/220 VAC; 50/60 Hz1 – The maximum part sizes are estimates and can vary depending on the specific part configuration andthe size of the dispense syringe, cartridge or valve used. All units have 0 to 2" adjustable stroke.2 – The weight capacity of the rotary station can vary depending on the center of gravity of the part and the program’srotating speed and acceleration. 30 lb. was provided as a general indicator of the motor’s capacity. At weightsin this range, the equipment should be evaluated to confirm performance.92For additional information and the full line of equipment, visit www.equipment.loctite.com.

MOTIONCONTROLLOCTITE ® ADVANCING SLIDE DISPENSE STATIONItem Number: 98426The Loctite® Advancing Slide Dispense Station is used for repetitive dot dispensing or pottingoperations that require motion in the z-axis. It is a fully integrated system that will control anysyringe, cartridge or dispense valve; no separate dispense controller is required. The rugged, allmetalconstruction is designed for tough manufacturing environments.Features:• Integrated solution – plug and play• Compact size• Precision timers with accuracy to 0.1 second• Robust slide design• Stroke adjustment 0 to 2"• Adjustable height, position and angle of dispense point• Sturdy work surface with 4 mounting holes for part fixturing• Rugged, all-metal enclosure• Vacuum suck-back to eliminate drips when syringe dispensing• Auto repeat mode cycles unit continuously without foot switch• Wide variety of mounting hardware availableInstallation OverviewA mounting bracket must be purchased separately to hold thesyringe, cartridge, or valve. The mounting bracket simply slidesover the 3 3 ⁄4" mounting rail that is attached to the bottom ofthe slide and is secured using a nylon screw. Once thedispenser is attached, the pneumatic dispense controls arepressed into the clearly labeled connections. The pneumaticdispense control fittings are 1 ⁄4" female NPT fittings and themost commonly required fittings to integrate a syringe,cartridge or valve are supplied.The height, position and angle of the dispense point caneasily be adjusted using the stand clamps. The stand clamps arespecifically designed to adjust effortlessly yet consistently holdtheir position during operation.The dispensing process is controlled using five variables thatare easy to adjust, set, and monitor. All timers have adjustableranges that yield good precision over a very wide range.VARIABLEDispense pressureDelay time before dispenseDispense timeSlide down timeAuto cycle timeRequired Separate PurchasesRANGE0 to 90 psi0.1 sec to 500 hours0.1 sec to 500 hours0.1 sec to 500 hours0.1 sec to 500 hours• Dispense valve, syringe adapter, or cartridge adapter• Mounting bracket• Dispense needles• Fixture to locate part(s)• Tubing for connecting valve(s) and air inTECHNICAL SPECIFICATIONSAttributeValueDispense PatternDots or pottingNumber of Dispense Points 1Slide Stroke 0 to 2"Maximum Part Height 1* 12"Width 12"Dimensions Depth 14.75"Height 28"Weight25 lbs.Weight Capacity 2*50 lbs.Vacuum Range1 to 15 inches HgAir InputClean, dry air not to exceed 125 psig and filteredwith a maximum of 50 micronsAir Output0 to 100 psiPower Source110/220 VAC; 50/60 HzProgramming4 Adjustable Range Analog TimersParts Included(1) Advancing Slide Dispense Station(1) Fitting Kit for Dispenser Connection(1) Foot Switch (1) Power Cord (1) ManualAdditional Information For Valve Dispensing, see pages 64-74.For Syringe Dispensing, see page 83.For Mounting Hardware, see page 95.For Dispensing Tips, see pages 80-81.* For explanation of notes 1 and 2, please refer to notesbelow the chart on page 92.Dispense StationsFor additional information and the full line of equipment, visit www.equipment.loctite.com.93

MOTIONCONTROLDispense StationsLOCTITE ® SINGLE ROTARY DISPENSE STATIONItem Number: 98427The Loctite® Single Rotary Dispense Station is used for repetitive dispensing of circles, arcsand/or dots in a circular pattern that also requires motion in the z-axis. It is a fully integratedsystem that will control a syringe, cartridge or dispense valve. No separate dispense controlleris required. The programming is menu driven using a multi-line, back-lit display. The rugged,all-metal construction is designed for tough manufacturing environments.LOCTITE ® DUAL ROTARY DISPENSE STATIONItem Number: 98428The Loctite® Dual Rotary Dispense Station is used for repetitive dispensing of circles, arcsand/or dots in a circular pattern on two simultaneously controlled stations. It is a fullyintegrated system that will control a syringe, cartridge or dispense valve. No separate dispensecontroller is required. The programming is menu driven using a multi-line,back-lit display. Installation and integration with a dispense syringe,cartridge or valve is very simple, only requiring a mountingbracket and several pneumatic connections. The rugged, all-metalconstruction is designed for tough manufacturing environments.Features for Rotary Dispense Stations:• Integrated solution – plug and play• Compact size• Easy to program with menu driven prompts• Robust slide design• Stroke adjustment 0 to 2"• Adjustable height, position and angle of dispense point• Rugged, all-metal enclosure• Vacuum suck-back to eliminate drips when syringe dispensing• Auto repeat mode cycles unit continuously without foot switch• Wide variety of mounting hardware availableProgrammingSimple to program using a multi-line, back-lit user interfacepanel with user friendly prompts. It is possible to enter 10programs consisting of full circles, dots and/or arcs. Each ofthese dispense patterns is considered an “event” and there canbe twenty events per program. For each event, the user specifiesthe start and end coordinates in degrees (determined in set upmode), the rotating speed, the delay after the slide advances butbefore dispensing starts, and the delay after dispensing beforeretracting the slide. Programs can be initiated using either afoot switch or the start button. When this occurs, a completeprogram cycle is executed. The table rotates using a steppermotor that allows the location to be specified within 0.1 degree.Required Separate Purchases• Dispense valve, syringe adapter, or cartridge adapter• Mounting bracket• Dispense needles• Fixture to locate part(s)• Tubing for connecting valve(s) and air in98428 – Loctite ® Dual RotaryDispense Station with a 90° set upTECHNICAL SPECIFICATIONS98427 – Loctite ® SingleRotary Dispense Station98428 – Loctite ® Dual RotaryDispense Station with a 45° set upAttribute 98427 98428Dispense PatternCircles, Arcs and/or Dots in a Circular PatternNumber of Dispense Points 1 2Rotating Speed 0.1 to 100 RPM 0.1 to 100 RPMSlide Stroke 0 to 2" 0 to 2"Maximum Part Height 1* 12" 8" at 90°Maximum Part Size 1*8.5" Diameter4" Diameter at 90°6" Diameter at 45°Width 14.1" 14.1"Dimensions Depth 11.6" 11.6"Height 28.7" 23.9"Weight 26 lbs. 25 lbs.Weight Capacity 2* 30 lbs. 30 lbs.Air InputClean, dry air not to exceed 125 psig and filteredwith a maximum of 50 micronsAir Output 0 to 100 psi 0 to 100 psiPower Source110/220 VAC; 50/60 HzProgram Capacity 10 10ProgrammingMulti-Line Digital Control Panel with User Friendly PromptsParts Included(1) Rotary Dispense Station(1) Fitting Kit for Dispenser Connection(1) Foot Switch (1) Power Cord (1) ManualAdditional Information For Valve Dispensing, see pages 64-74.For Syringe Dispensing, see page 83.For Mounting Hardware, see page 95.For Dispensing Tips, see pages 80-817.* For explanation of notes 1 and 2, please refer to notesbelow the chart on page 92.94For additional information and the full line of equipment, visit www.equipment.loctite.com.

Loctite® Brand Mounting Hardware,Workbenches, and GuardingEnclosuresMOUNTING BRACKET KITS – Mounting bracket kits are usedto grasp syringe barrels, Loctite® Posi-Link syringe and dualcartridge nests, 300 ml cartridges, dispense valves, and LEDs.Mounting rails or adapters are required to mount the bracketson the robot or dispense station.Item #Description98316 30 ml syringe mounting bracket kit98318 300 ml cartridge mounting bracket kit98326 98009 and 98013 valve mounting bracket kit98327 97113 and 97114 valve mounting bracket kit98406 983914 and 986300 poppet valve mounting bracket kit9844198520 spray and 98084 micro needle valvemounting bracket kitTIP LOCATOR BRACKETS* – Tip locator brackets position thedispense tip to increase precision and are used to mechanically setthe tip height during installation. A mounting bracket and rail,plate or adapter must be purchased separately.Item #Description98332 Tip locator bracket for 30 ml syringes98333 Tip locator bracket for 300 ml cartridges98334 Tip locator bracket for 98009 and 98013 valves98335 Tip locator bracket for 97113 and 97114 valves98407 Tip locator bracket for 983914 and 986300 poppet valve* These are sized for 1", 25 gauge stainless steel needles andmust be modified by the user for larger gauge sizes.Z HEIGHT ADJUSTMENT PLATE FOR 3 AXIS BENCHTOP ROBOTSThis plate allows you attach the mounting rails above orbelow the mounting bracket on the robot.MOTIONCONTROLDispense Stations98646 Universal syringe bracket for Posi-Link 98647 50 ml dual cartridge bracket for Posi-Link 98669 98591 and 98595 LED mounting bracket kit3, 5 AND 10 ML SYRINGE ADAPTERS – These adapters areinserted into the 30 ml syringe mounting bracket kit to adapt itfor 3, 5 and 10 ml syringes. The 30 ml syringe mounting bracket(item 98316) must be purchased separately.Item #Description98357 Z height adjustment plate929541Z height adjustment plate - Posi-Link 200-400 NestsMOUNTING RAILS FOR 3 AXIS BENCHTOP ROBOTS ANDDISPENSE STATIONS – A mounting rail is required when usingLoctite® brand mounting hardware for all 3 axis BenchtopRobots and Dispense Stations.Item #DescriptionItem #Description98320 10 ml adapter for use with 9831698321 5 ml adapter for use with 9831698322 3 ml adapter for use with 9831698328 3 3 ⁄4 inch bar with two cap screws98329 8 3 ⁄4 inch bar with two cap screws98330 12 inch bar with two cap screwsMOUNTING ADAPTER FOR ALL 4 AXIS ROBOTS –A mounting adapter is required when usingLoctite® brand mounting hardware for all 4 axisrobots. The mounting adapter includesa 360 degree rotation kit.Item #Description98336 Mounting adapter for 4 axis robots360 DEGREE ROTATION KIT – This is used to allow for 360degrees of rotation when using a mounting bracket kit or tiplocator. A 360 degree rotation kit is already included withthe mounting adapter for 4 axis robots.Item #Description98325 360 degree rotation kitCOMPLETE MOUNTING KITS FOR 3 AXIS SCARA ROBOTS*Complete mounting adapter kits hold the syringe,cartridge or valve, and position the dispense tip60 mm from the end of the tool arm.Item #Description98340 30 ml syringe holder98341 300 ml cartridge holder98342 98009 and 98013 valve holder98343 97113 and 97114 valve holder98408 983914 and 986300 poppet valve holder* These are sized for 25 gauge needles and must bemodified by the user for larger gauge sizes.MOUNTING PLATE FOR 3 AXIS SCARA ROBOTS – A mountingplate is required when using Loctite® brand mountinghardware for all 3 axis SCARA Robots (except whenusing a complete mounting kit).Item #Description98337 Mounting plate for SCARA robotWORKBENCHES• Strong and sturdy workbenches• Accomodate all Loctite ® brand robotsGUARDING SYSTEMS – For Plants requiringhigher safety levels• Light Curtain or Interlocked Sliding Door* on front• Sturdy extruded aluminum frame• Polycarbonate panels on left, right and rear• Operator control panel mounted on front right• Direct plug-in to robots* Interlocked door model for Benchtop units onlyItem # Description Dimensions989783 200 Series Workbench 36" W x 24" D x 36" H989784 300 Series Workbench 42" W x 30" D x 36" H989785 400/500 Series Workbench 48" W x 36" D x 36" H989860 SCARA Series Workbench 48" W x 48" D x 36" H989787 200 Series Slide Door 22" W x 24" D x 27" H989763 200 Series Light Curtain 22" W x 24" D x 27" H989788 300 Series Slide Door 30" W x 30" D x 30" H989771 300 Series Light Curtain 30" W x 30" D x 30" H989789 400/500 Series Slide Door 32" W x 36" D x 35" H989777 400/500 Series Light Curtain 32" W x 36" D x 35" H989852 SCARA Light Curtain 48" W x 48" D x 36" HFor additional information and the full line of equipment, visit www.equipment.loctite.com.95

FUMEFILTRATIONFume Filtration SystemSystemBENCHTOP FUME FILTRATION SYSTEMItem Number: 98277The Benchtop Fume Filtration System is designed toremove dust particulate and fumes emitted byadhesives, sealants, cleaning solvents, and otherchemicals. This compact system offers flexibleoperation in a small space and matches the airflowof many larger systems. It features quiet operationand a bi-colored LED light to indicate blocked filters.This unit can be operated as an open plenum fora working area up to 12" wide or can easily beconverted into an arm system for more direct fumecapture. The 2" x 24" flexible arm can be positionedto be unobtrusive to the operator, yet provideeffective air filtration. It is equipped with a DeepBed Activated Carbon Fume Filter. HEPA/CarbonFilters are available separately.Features:• High airflow rates• Runs quietly• LED light indicates blocked filter• Efficient arm or plenum applicationsprovide flexibility• Compact, space-saving footprint• UL, CSA, and CE compliantInstallation OverviewThis filtration system filters fumes emittedfrom adhesives, sealants, cleaning solvents,and other chemicals, as well as dustparticulate from other sources.Recommended Spare Parts987200 – Filter, Pre-Filter (set of 5)987201 – Filter, Deep Bed CarbonAir Inlet PortsFan CapacitySystem CapacityMaximum Static PressurePower SupplyMotor RatingPower ConsumptionNoise Level, Approx.TECHNICAL SPECIFICATIONS2" Diameter x 24" Long or 12" Plenum50 cfm50 cf5 inches of water90/264 VAC; 50/60 Hz0.11 HP; 85 watt1 amp55 dBADimensions (W x D x H) 12" x 10.4" x 11.75"WeightPowerApprovalsParts IncludedAdditional AccessoriesSold Separately15.4 lbs.On/off switch withpower indicator lightUL, CSA, CE(1) Fume Filtration System (1) Pleated Pre-Filter (1) Manual(1) Deep Bed Activated Carbon Fume Filter (1) Power Cable987364 – HEPA / Carbon Filter 987366 – Exhaust Arm987365 – Arm Adapter 987367 – Arm Nozzle, 40 mm96For additional information and the full line of equipment, visit www.equipment.loctite.com.

O-Ring FabricationO-RINGFABRICATIONHenkel has introduced our new Loctite® Precision O-Ring Cut and Splice Tool thatturns industrial o-ring cord stock into precise o-rings that are ready for use in a matterof seconds. Digital calipers ensure accurate and repeatable measurement to ensure thatyou get a correctly sized o-ring every time.PrecisionO-Ring KitLOCTITE ® PRECISION O-RING CUT AND SPLICE TOOLItem Number: 98613The Loctite® Precision O-Ring Cut and Splice Tool is a patentpending, industrial grade tool that provides precise measuring,cutting and bonding of both standard and metric o-ring cordstock. This tool offers a cost effective solution to creatingcustom o-rings from 1.05" to 4" (26 mm to 100 mm) indiameter. It incorporates a digital caliper for precisemeasurement with every o-ring you make. The scale displayseither standard or metric dimensions. The cutting fixture isdesigned to ensure clean, square cuts, while rugged holdingclamps provide seamless bonding of the cord stock.Features:• Digital caliper provides precise measurementdown to 0.01 mm resolution• Measurements can be either in inches or mm• Convenient conversion chart provides cord stocklength vs. required o-ring diameter• Gold plated cutting blade ensures clean cuts and longer life• Accommodates cord stock up to 1 ⁄4" (7 mm) in diameter• Acetal Copolymer holding clamps are rugged andresist any adhesive build-upTheory of OperationO-ring cord stock is placed through the cutting blade assemblyand securely attached to the first holding clamp on the slidingdigital caliper assembly. The caliper is then extended from azero point away from the cutting face to the precise distancethat will equate to the o-ring diameter required. The cuttingblade is then manually engaged to cut the exact length of cord.The loose end of cord stock is now attached to the 2nd holdingclamp that properly aligns both ends to each other. Loctite®404 Quick Set Instant Adhesive (available as part of kits andalso sold separately) is applied and both ends are broughttogether making a perfect o-ring bond in just a few seconds.DimensionsWeightPowerO-Ring DimensionsParts IncludedThe Starter Kit and Splice Tool are sold separately.TECHNICAL SPECIFICATIONS17.25" L x 6.125" W x 4.75" H2.8 lbs.Digital Scale uses Button Cell SR44, 1.55 VMaximum Diameter Cord Stock Diameter: 1 ⁄4" (7 mm)O-Ring Diameter Range: 1.05" to 4.0"Scale Resolution: 0.01 mm(1) O-Ring Cut and Splice Tool (1) Manual (1) Instruction SheetAdditional Accessories Sold Separately8900513 –Loctite ® PrecisionO-Ring Starter KitParts Included: (1 each) 3' O-Ring Stock, 0.093",0.125", 0.187" and 0.25" Diameter(1) 75326 – Loctite ® Clean-Up Solvent(1) 74126 – Loctite ® Water Proofing Solution(1) 46551 – Loctite ® 404 Quick Set Instant AdhesiveLoctite ® O-Ring Replacement Cord Stock(All Buna-N, 5 ft. length)909395 – 0.093" diameter909394 – 0.125" diameter909396 – 0.187" diameter909393 – 0.250" diameterFor additional information and the full line of equipment, visit www.equipment.loctite.com.97

LIGHT CURELight Cure SolutionsSolutionsHenkel offers the widest selection of light curing equipment available from any onecompany on the market today. Our Loctite® brand insures you have the most innovativeand dependable systems for all your light curing adhesive applications. Whether yourprocess calls for a manual, semi-automatic or fully integrated automatic solution, youwill find the Loctite® brand light curing device to meet your specific requirements.Please see the charts below which summarize our complete line.PRODUCT Item Number Lamp TypeLED CURING DEVICES – High powered benchtop and portable systems for visible light cure adhesives, providing effective spot curingsolutions for both manual or integrated automatic systems.Loctite ® 7700 LED Light Source 98591Loctite ® 7700-HD LED Light Source 98601LED - 405 nmLoctite ® 7703 LED Light Source 98595Loctite ® 7703-HD LED Light Source 883979LED - ProprietaryWavelengthNEWLoctite ® CureJet 405 LED 976420 LED - 405 nmNEWLoctite ® CureJet Indigo LED 976418LED - ProprietaryWavelengthNEWLoctite ® LED Controller 976419 •WAND SYSTEMS – Four different spot curing systems. one visible light and three UV, each with its own range of curing intensity from1 to 20 W/cm 2 . These systems are ideal for both manual or integrated automatic systems.Loctite ® Indigo 7720Visible Light Wand System98633 100 watt Metal HalideLoctite ® ZETA ® 7735UV Wand SystemLoctite ® ZETA ® 7740UV Wand SystemLoctite ® ZETA ® 7760UV Wand System98317A958216(Bulb Life Monitoring)98157A958228(Bulb Life Monitoring)98450958239(Bulb Life Monitoring)50 wattHigh Pressure Mercury Arc100 wattHigh Pressure Mercury Arc200 wattHigh Pressure Mercury Arc98For additional information and the full line of equipment, visit www.equipment.loctite.com.

LIGHT CURE SolutionsPRODUCTItemNumberLamp TypePRODUCTItemNumberLamp TypeENCLOSED CHAMBER AND FLOOD SYSTEMS – These systems are ideal for batchprocessing. UV and alternate visible light bulb options are available.CURE CONVEYORS – Can be used for either continuous or batchprocessing of assemblies.NEWLoctite ®UVALOC 1000 UVCure Chamber8057411000 wattMercury VaporLoctite ® ZETA ® 7415 UVBenchtop Conveyor98003300 W/in.Electrodeless(Sold Separately)Loctite ® ZETA ® 7610 UVBenchtop Conveyor985881,800 watt MediumPressure Mercury ArcLampLoctite ®ZETA ® 7401UV Chamber98039400 wattMetal HalideLIGHT SOURCES – Can be used with our Loctite ® ZETA ® UV conveyors orintegrated into a custom system with added shielding, cooling and venting(not included with these products).Loctite ®ZETA ® 7411-S UVFlood System98413400 wattMetal HalideLoctite ® ElectrodelessLamp Assembly andPower SupplyLoctite ®High IntensityUltraviolet Sources98004(208 VAC) 300 W/in.Electrodeless98005(240 VAC)980160 1,500 wattMedium Pressure982440 Mercury Arc LampLoctite ®Indigo 7418Visible Flood SystemLoctite ®ZETA ® 7420Visible LightFlood System97103198060(110 V)98182(220 V)400 wattVisible Arc Lamp500 wattVisible Arc LampPRODUCTItemNumberMeasurementRangeLIGHT METERS – UV and visible light cure systems. These meters provide preciseand repeatable measurement of any Loctite ® brand light cure system to ensure yourprocess remains in control.Loctite ® ZETA ®7011-A Dosimeter-RadiometerLoctite ® ZETA ®7011-V Dosimeter-Radiometer9808698089320 to400 nm350 to500 nmFor proper eye protection, useLoctite® brand ultravioletsafety glasses.Loctite ®ZETA ® 7021Spot Radiometer98048280 to400 nm /3 and 5 mmwandsItem 97210Item 98452For additional information and the full line of equipment, visit www.equipment.loctite.com.99

LED Light Sources LIGHT CURELED Light SourcesHenkel has introduced these new innovative and effective LED lightcuring devices. High power, portability, continuous duty cycles and longLED life are some of the key reasons that make Loctite® brand LED lightsources the optimal solution for many light curing adhesive applications.LOCTITE ® 7700 LED LIGHT SOURCEItem Number: 98591LOCTITE ® 7703 LED LIGHT SOURCEItem Number: 98595Light to medium dutyuse cycles:

LOCTITE ® 7700-HD LED LIGHT SOURCEItem Number: 98601Heavy continuous dutycycles: Up to 100% on time.LOCTITE ® 7703-HD LED LIGHT SOURCEItem Number: 883979Heavy continuous dutycycles: Up to 100% on time.LIGHT CURE LED Light SourcesThese heavy duty point light source LED models provide the same intensity and curing characteristics as the battery powered 98591and 98595 units, but offer 100% on-time duty cycle capability. Ideal for process line integrations, these units also have alternateoperational choices for cycle initiation to meet various processing requirements.Features:• Instant On/Off – no warm up like traditional UV systems• LED life lasts up to 5 times longer than typical UV bulb units• Pinpoint tip allows close exposures even in the tightest locationsTested Loctite® Brand Light Cure Adhesives Cured Tack Free:Item Number: 98601 Item Number: 883979• 3105 (3311) • 3922 • 3944 • All Loctite® • Loctite® 3552• 3106 (3321) • 3924 • 3971 Flashcure® and 3553 Indigo• 3107 (3341) • 3926 • 3972 Light Cure Adhesives Visible Light• 3525Cure AdhesivesOPERATIONAL OPTIONS98601 and 883979 require the choice of a foot switch, PLC cable, LED timer or pistol grip timer option in order to operate.97201 –Foot Switch8900550 –PLC Cable960356 –LED Timer1003327 –Pistol Gripand TimerTECHNICAL SPECIFICATIONSAdditional Accessories Sold SeparatelyItem Number98601 – Loctite ® 7700-HDLED Light Source883979 – Loctite ® 7703-HDLED Light SourceDimensions8.9" L x 1.4" W x 2.0" HWeight0.75 lbs.UtilitiesUniversal 110-240 V; 47-263 HzLight SourceHigh Powered LEDTypical Cure Area Up to 1 ⁄4" x 1 ⁄4"Typical Output* 0.5 to 1.0 W/cm 2 3.0 to 3.5 W/cm 2Spectral Output Range385 to 425; Primary Peak405 nm*Proprietary98089 – Loctite ®ZETA ® 7011-VDosimeter989929 –AC Charger for LED-HD98452 – Loctite ® Safety Glasses(Removes all wavelengths 200 to 540 nm)98453 – Loctite ® ZETA ® Dosimeter Adapter967055 – LED Protective Tip Covers (5 pack)1044301 – LED-HD Pistol Grip Battery Kit(Kit Includes Replacement Battery,Cap and Charger)* Exact output measurement is dependent on the brand and calibration method of the meter used. These measurementswere made with a Loctite® ZETA® 7011-V Dosimeter-Radiometer at a distance of 0.25".For additional information and the full line of equipment, visit www.equipment.loctite.com.101

LED Light Sources LIGHT CURELOCTITE ® CUREJET LED LIGHT SOURCESLOCTITE ® CUREJET 405 LED Item Number: 976420LOCTITE ® CUREJET INDIGO LED Item Number: 976418Our new Loctite® CureJet LEDs are our highest power LEDspot curing systems. This innovative design offers significantlywider cure area and curing intensity capability than our singlepoint LED devices, providing the ultimate in processing speeds.Choose the system based on the adhesive systemsthat are in use.Features:• 100% on time duty cycle• Highly focused LED with peak intensity at0.25" from cure surface• Instant on/off – no warm up like traditional UV systems• Manual or timed light exposures using anintegrated control timer• LED life lasts up to 5 times longer than typical UV bulb units• Internal diagnostics and digital I/O port, connect viaoptional PLC interface cable• Stackable with 1" center to center spacingNEWLoctite ® CureJet shown with LED Controllerand cable sold separatelyComparitive Cure Area versus Distance from Cure SurfaceCure Area [cm 2 ]1.41.21.00.80.60.40.200 0.25 0.5 0.75 1.0 1.25Distance [inches]CureJet7700-HDLoctite® CureJet 405 LEDComparative Irradiance versus Distance from Cure SurfaceLoctite® CureJet Indigo LEDComparative Irradiance versus Distance from Cure SurfaceIrradiance [W/cm 2 ]1.2001.0000.8000.6000.4000.200Irradiance [W/cm 2 ]5.0004.0003.0002.0001.0000.0000 0.5 1.0 1.5 2.0 2.50.0000 1 2 3Distance [inches]CureJet 4057700-HDDistance [inches]CureJet IndigoIndigo 7703-HDTested Loctite® Brand Light Cure Adhesives Cured Tack Free:• 3105 (3311) • 3922 • 3944 • All Loctite® • Loctite® 3552• 3106 (3321) • 3924 • 3971 Flashcure® and 3553 Indigo• 3107 (3341) • 3926 • 3972 Light Cure Adhesives Visible Light• 3525Cure AdhesivesItem NumberTECHNICAL SPECIFICATIONS976420 – Loctite ®CureJet 405 LED976418 – Loctite ®CureJet Indigo LED976419 – Loctite ®LED ControllerDimensions 1" W x 2.5" H x 10.25" L 1" W x 2.5" H x 10.25" L 10" W x 4" H x 9.75" DWeight 1 lbs. 1 lbs. 8 lbs.Input Power • • 85/264 VAC; 50/60 HzMaximum Current • • •Typical Intensity* 1.1 W/cm 2 4.3 W/cm 2 •Cure Diameter at 0.25"Distance (Peak Intensity)0.38" 0.38" •Spectral Peak 405 nm Proprietary •Additional Items Sold SeparatelyREQUIRED ITEMS – SOLD SEPARATELY976419 –Loctite ® LEDController98089 – Loctite ®ZETA ® 7011-VDosimeter[Requires 1007439 Adapter]1007349 – Loctite ®CureJet LED Dosimeter Adapter1008352 – 3 m Interconnecting Cable1008353 – 1 m Interconnecting Cable98452 – Loctite ®Safety Glasses(Removes all wavelengths 200 to540 nm) [Recommended]8900550 – PLC Interface Cable* As measured with a Loctite® 7011-V at a distance of 0.25".102For additional information and the full line of equipment, visit www.equipment.loctite.com.

Wand SystemsLoctite® ZETA® light cure wand systems are used for the continuous or batch processing of assemblies thatrequire curing in small areas. These cost effective systems provide a variety of curing attributes. Selection of aLoctite® ZETA® wand system is based on the required lamp intensity and the number and length of the lightguides needed as well as the need for continuous intensity monitoring or measuring. The time required tocomplete the curing process depends primarily on the offset distance from the end of the light guide to thesurface of the adhesive, and the type of adhesive being used.LIGHT CURE Wand SystemsPRODUCTLoctite ® Indigo 7720Visible Light Wand SystemLoctite ® ZETA ® 7735UV Wand SystemsLoctite ® ZETA ® 7740UV Wand SystemsLoctite ® ZETA ® 7760UV Wand SystemsItem Number 98633 98317A / 958216 98157A / 958228 98450 / 958239Useful Curing Diameter 1 ⁄4" to 1" 1 ⁄4" to 1" 1 ⁄4" to 1" 1 ⁄4" to 1"Light Guides Specific guides are required for each wand. See individual wand descriptions on pages 105-107.Lamp Type100 watt Metal Halide50 watt High PressureMercury Arc100 watt High PressureMercury Arc200 watt High PressureMercury ArcTypical Intensity* 1.0 to 1.5 W/cm 2 5 to 7 W/cm 2 9 to 11W/cm 2 16 to 20 W/cm 2Optimized SpectralOutput RangeVisible UVA, B, C UVA, B, C UVA, B, CSpectral Wavelength – 250 to 410 nm 250 to 410 nm 250 to 410 nmReplacement Bulb(Item Number / Type)98635 – Lamp / ReflectorModule, 100 W Metal Halide98339 – Lamp / ReflectorModule, 50 W (HPMA)Additional Accessories Sold Separately984818 – Lamp / ReflectorModule, 100 W (HPMA)98451– Lamp / ReflectorModule, 200 W (HPMA)LOCTITE ® LIGHT INTENSITY MONITORItem Number: 891494Digital light lntensity monitoring optionfor Loctite® UV Wands 958216, 958228and 958239 only.LOCTITE ® ZETA ® 7021 SPOT RADIOMETERItem Number: 98048Effective monitoring of UV wand curingsystem performance. See page 114.* Exact output measurement is dependent on the brand and calibration method of the meter used.Spectral Output of Loctite ® ZETA ® 773550 Watt High Pressure Mercury Arc LampSpectral Output of Loctite ® ZETA ® 7740100 Watt High Pressure Mercury Arc LampRelative Irradiance1.00.80.60.40.20225 250 275 300 325 350 375 400 425 450 475 500Wavelength in nmRelative Irradiance1.00.80.60.40.20225 250 275 300 325 350 375 400 425 450 475 500Wavelength in nmSpectral Output of Loctite ® ZETA ® 7760 Mercury Arc BulbSpectral Output of Loctite ® ZETA ® 7760 Mercury Arc Bulb withOptional Filter Kit 98598 to Optimize Tack-Free Surface CureRelative Output %Relative Output %240 260 280 300 320 340 360 380 400 420 440Wavelength in nm230 250 270 290 310 330 350 370 390 410 430Wavelength in nmFor additional information and the full line of equipment, visit www.equipment.loctite.com.103

Wand SystemsLIGHT CURELOCTITE ® INDIGO 7720 VISIBLE LIGHT WAND SYSTEMItem Number: 98633The Loctite® Indigo 7720 Visible Light Wand Curing System provides effective curing for larger bead sizes of our new Loctite®Indigo visible light curing adhesives. This curing system utilizes a 100 watt, fully visible metal halide lamp system and providesup to 1.5 W/cm 2 of visible light curing intensity. The system is designed to be constantly powered, providing for effectivecontinuous duty service. This light source uses a long life fiber optic light guide that significantly outlasts liquid-filled lightguides. The light guide is required and sold separately.Features:• Output exceeds 1 W/cm 2 for up to 3 ⁄4" diameter cure areas• Long life fiber optic light guide significantly outlasts liquid-filled light guides• Light guide is highly flexible and enhances ability to reach tough location cure areas• Contains a 100 watt, visible arc bulb that provides up to 2 times longer life than typical UV bulbs• Emits light only in the visible light range• Constant-on functionality ensures effective, continuous duty serviceTheory of OperationWhen the unit is switched on, electrical power is immediatelysupplied to the lamp. It takes 3 to 5 minutes for the metal halidelamp to come up to full power. A fiber optic light guide, soldseparately, is also required and inserted into the lamp irisopening. The light guide focuses the lamp intensity down to aspecific diameter and provides the operator convenient andeffective control of curing visible adhesive joints up to 1" diameter.The lamp system is designed to stay continuously on so thereis no need for further on/off activation.INTENSITY VS. CURE AREADistance Typical Cure Diameter Typical Intensity*0.25" 0.56" 1.6 W/cm 20.5" 0.75" 1.1 W/cm 2* Exact output measurement is dependent on the brand and calibration method ofthe UV meter, and the condition and straightness of the light guide used.DimensionsWeightWarm-Up TimePower SupplyMain FuseReplacement PartsParts IncludedTECHNICAL SPECIFICATIONS4.6" H x 7.25" W x 9.5" D12 lbs.3 to 5 minutes115 VAC; 50/60 Hz5 A, 250 V98635 – 100 watt Metal Halide Bulb(1) Indigo 7720 UV Wand System (1) Line Cord(1) 100 W Metal Halide Bulb (1) ManualAdditional Accessories Sold Separately98452 – Loctite ® SafetyGlasses (Removes allwavelengths 200 to 540 nm)98634 – 6 mm D x 1000 mmFiber Optic Light Guide1025264 – Loctite ® Fiber Optic Light Guide Radiometer Adapter104For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITE ® ZETA ® 7735 UV WAND SYSTEMSItem Numbers: 98317A and 958216The Loctite® ZETA® 7735 UV Wand Systems utilize a 50 watt mercury arc lamp with a universal power supply. The state-of-the-artlamp with elliptical reflector and custom coating delivers unequaled spectral and optical performance in the 50 watt category.These wand systems bridge the gap between low intensity and high intensity spot curing products. They are ideally suited for themedium to low intensity requirements of the photo-optics and audiology industries. Other common uses are fillet curing, wiretacking, and shallow potting. The system can be operated manually or in the timed mode and is capable of interfacing with a PLC.Continuous lamp intensity monitoring is also available by selecting item 958216 and the requiredLight Intensity Monitor item 891494. The light guides are also sold separately fromthe base units. Light guide choices are highlighted below.Features:• 5 to 7 W/cm 2 UV output• 50 watt high pressure mercury arc lamp• 2,000 hours of expected UV lamp life withproper handling and maintenance• Manual or timed shutter light exposure, 0 to 99.9 seconds• Hour meter for monitoring accumulated lamp life• Selector switch for either 110 or 230 VACAdditional Features for Item 958216 when used in conjunction with 891494• LED control display highlights relative intensitychanges in 10% increments• Minimum required intensity can be programmed for a warningor integrated to PLC for external alarm or shutdown conditionLIGHT CURE Wand SystemsTheory of OperationWhen the unit is switched on, the proper electrical power is immediately supplied to the lamp. It will take approximately fiveminutes for the lamp to reach full power. Once the lamp has reached full power, the unit is ready to cure adhesive. The operator willpresent the part under the end of the UV light guide. Curing will take place when the UV light is directed at the liquid adhesive.Engaging the foot switch opens the shutter and UV energy produced by the lamp is immediately transmitted through the flexiblelight guide. The end of the wand can be manually operated or mounted in a fixed position.Light Guides Sold SeparatelyDescriptions983677: Single end 5 mm diameter x 1,000 mm longLight Guide983684: Dual end 3 mm diameter x 1,000 mm longLight Guide (initial purchase requires951639 – Balancing Adapter)951681: Single end 5 mm diameter x 1,500 mm longLight GuideTypical Light Guide Cure Areas983677: 1 ⁄4" to 1 ⁄2" diameter983684: 1 ⁄8" to 1 ⁄4" diameter951681: 1 ⁄4" to 1 ⁄2" diameterLOCTITE ® LIGHT INTENSITY MONITORItem Number: 891494Power SupplyMain FuseDimensionsWeightParts IncludedTECHNICAL SPECIFICATIONS90/265 VAC; 50/60 Hz input1 A, 250 V5.5" H x 6.1" W x 6.8" D1 lbs.(1) Intensity Monitor(1) Sensor Input Cable(1) Power Cord (1) ManualTECHNICAL SPECIFICATIONSItem Numbers 98317A / 958216Power Supply100/240 VAC; 50/60 Hz inputPower Protection5 A / 250 V fuseAuxiliary Control Voltage12 VDCEntry Fuse3 A, 250 VDimensions7.3" H x 11.1" W x 12.8" DWeight19.5 lbs.Optimized Spectral Output RangeUVA, B, CReplacement Bulb(Item Number and Type)UV OutputCharacteristicsParts IncludedReplacement PartsTypicalUV Spectral RangePrimary Peak98339 – Lamp/Reflector Module50 watt HPMA UV Bulb5 to 7 W/cm 2(using 5 mm x 1,000 mm light guide)*250 to 410 nm365 nm(1) Loctite ® ZETA ® 7735 UV Wand System(1) Ultraviolet Protection Glasses (1) Line Cord(1) UV Lamp (1) Foot Pedal (1) Manual98339 – 50 watt HPMA UV BulbAdditional Accessories Sold Separately98048 –Loctite ® ZETA ®7021 Spot Radiometer(See page 114)891494 –Loctite ® LightIntensity Monitor –for 958216 only* Exact output measurement is dependent on the brand and calibration methodof the UV meter, and the condition and straightness of the light guide used.For additional information and the full line of equipment, visit www.equipment.loctite.com.105

Wand SystemsLIGHT CURELOCTITE ® ZETA ® 7740 UV WAND SYSTEMSItem Numbers: 98157A and 958228The Loctite® ZETA® 7740 UV Wand Systems utilize a 100 watt high-pressure mercury arc lamp with a universal power supplyand a liquid-filled light wand. They can be operated manually or in the timed mode and are capable of interfacing with a PLCcontrolled circuit. Continuous lamp intensity monitoring is also available by selecting item 958228 and the required Light IntensityMonitor item 891494. The light guides are also sold separately from the base units. Light guide choices are highlighted below.Features:• Highest output light intensity; 9 to 11 W/cm 2• Contains a high-pressure mercury arc lamp• 2,000 hours of expected UV lamp life with proper handling and maintenance• Manual or timed shutter light exposure, 0 to 99.9 seconds• Hour meter for monitoring accumulated lamp life• Self-test diagnostics display message when a problem existsAdditional Features for Item 958228 when used in conjunction with 891494• LED control display highlights relative intensity changes in 10% increments• Minimum required intensity can be programmed for a warningor integrated to PLC for external alarm or shutdown conditionTheory of OperationWhen the unit is switched on, the proper electrical power isimmediately supplied to the lamp. It will take a few minutes forthe lamp to reach full power. The operator will manually orautomatically place the part under the end of the UV wand.Curing will take place when the UV light is directed at theliquid adhesive. Engaging the foot switch opens the shutter andUV energy produced by the lamp is immediately transmittedthrough the flexible light guide. The end of the wand can bemanually operated or mounted in a fixed position.Light Guides Sold SeparatelyDescriptions983677: Single end 5 mm diameter x 1,000 mm longLight Guide983684: Dual end 3 mm diameter x 1,000 mm longLight Guide (initial purchase requires951639 – Balancing Adapter)951681: Single end 5 mm diameter x 1,500 mm longLight GuideTypical Light Guide Cure Areas983677: 1⁄4" to 1 ⁄2" diameter983684: 1 ⁄8" to 1 ⁄4" diameter951681: 1⁄4" to 1 ⁄2" diameterLOCTITE ® LIGHT INTENSITY MONITORItem Number: 891494Power SupplyMain FuseDimensionsWeightParts IncludedTECHNICAL SPECIFICATIONS90/265 VAC; 50/60 Hz input1 A, 250 V5.5" H x 6.1" W x 6.8" D1 lbs.(1) Intensity Monitor(1) Sensor Input Cable(1) Power Cord (1) ManualTECHNICAL SPECIFICATIONSItem Numbers 98157A / 958228Power Supply100/240 VAC; 50/60 Hz inputPower Protection4 A / 250 V fuseAuxiliary Control Voltage12 VDCLamp LifeApproximately 2,000 hoursWarm-Up Time5 minutesMain Fuse5 A, 250 VDimensions7.3" H x 11.1" W x 12.8" DWeight19.5 lbs.Optimized Spectral Output RangeUVA, B, CUV OutputCharacteristicsParts IncludedReplacement PartsTypical9 to 11 W/cm 2(using 5 mm x 1,000 mm light guide)*UV Spectral Range250 to 410 nmPrimary Peak365 nm(1) Loctite ® ZETA ® 7740 UV Wand System(1) Ultraviolet Protection Glasses (1) Line Cord(1) UV Lamp (1) Foot Pedal (1) Manual984818 – 100 watt HPMA UV BulbAdditional Accessories Sold Separately98048 –Loctite ® ZETA ®7021 Spot Radiometer(See page 114)891494 –Loctite ® LightIntensity Monitor –for 958228 only* Exact output measurement is dependent on the brand and calibration methodof the UV meter, and the condition and straightness of the light guide used.106For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITE ® ZETA ® 7760 UV WAND SYSTEMSItem Numbers: 98450 and 958239The Loctite® ZETA® 7760 UV Wand Systems utilize a 200 watt high pressure mercury arc lamp with a universal power supply anda liquid-filled light wand. These systems have the highest intensity output for a Loctite® brand wand system by a factor of 2. TheLoctite® ZETA® 7760 UV Wand Systems can be operated manually or in the timed mode and are capable of interfacing with a PLCcontrolled circuit. Continuous lamp intensity monitoring is also available by selecting item 958239 and the required LightIntensity Monitor item 891494. The light guides are also sold separately from the base units.Light guide choices are highlighted below.Features:• Our highest output light intensity wand. Typical initialIntensity is 16 to 20 W/cm 2• Contains a high pressure mercury arc lamp• 1,000 hours of expected UV lamp life with properhandling and maintenance• Manual or timed shutter light exposure, 0 to 99.9 seconds• Hour meter for monitoring accumulated lamp life• Self-test diagnostics displays message when a problem existsAdditional Features for Item 958239 when used in conjunction with 891494• LED control display highlights relative intensitychanges in 10% increments• Minimum required intensity can be programmed for awarning or integrated to PLC for external alarm orshutdown conditionTheory of OperationWhen the unit is switched on, the proper electrical power isimmediately supplied to the lamp. It will take a few minutes forthe lamp to reach full power. The operator will manuallyor automatically place the part under the end of the UV wand.Curing will take place when the UV light is directed at the liquidadhesive. Engaging the foot switch opens the shutter and UVenergy produced by the lamp is immediately transmittedthrough the flexible light guide. The end of the wand can bemanually operated or mounted in a fixed position.Light Guide Options – UV wandsDescriptionDimensionsItem NumbersSingle Pole 2 Pole 3 Pole 4 PoleStandard 1 5 mm x 1000 mm 983677 • • •3 mm x 1000 mm N/A 983684 2 98596 2 98597 25 mm x 1500 mm 951681 • • •Enhanced UVC 2 5 mm x 1000 mm 97326 • • •3 mm x 1000 mm N/A 97328 2 98593 2 98594 25 mm x 1500 mm 98543 • • •1. Enhanced UVC wands require optional filter kit (98598) to optimize tack-freesurface cure on the Loctite® ZETA® 7760. (sold separately)2 Requires balancing adapter (951639) on initial setup.• Multi-pole guides are only available with 3 mm diameter poles.TECHNICAL SPECIFICATIONSItem Numbers 98450 / 958239Power Supply90/265 VAC; 50/60 Hz inputPower Protection4 A / 250 V fuseAuxiliary Control Voltage24 VDCLamp LifeApproximately 1,000 hoursWarm-Up Time5 minutesMain Fuse5 A, 250 VDimensions8.3" H x 11.5" W x 13.4" DWeight19.5 lbs.Optimized Spectral Output RangeUVA, B, C16 to 20 W/cmTypical(using 5 mm x 1,000 mm light guide)*UV OutputCharacteristics UV Spectral Range250 to 410 nmPrimary Peak365 nmParts Included(1) Loctite ® ZETA ® 7760 UV Wand System(1) Ultraviolet Protection Glasses (1) Power Cord(1) UV Lamp (1) Foot Pedal (1) ManualReplacement Parts98451 – 200 watt HPMA UV BulbAdditional Accessories Sold Separately98048 –Loctite ® ZETA ®7021 Spot Radiometer(See page 114)891494 –Loctite ® LightIntensity Monitor –for 958239 only* Exact output measurement is dependent on the brand and calibration methodof the UV meter, and the condition and straightness of the light guide used.LIGHT CURE Wand SystemsLOCTITE ® LIGHT INTENSITY MONITORItem Number: 891494Power SupplyMain FuseDimensionsWeightParts IncludedTECHNICAL SPECIFICATIONS90/265 VAC; 50/60 Hz input1 A, 250 V5.5" H x 6.1" W x 6.8" D1 lbs.(1) Intensity Monitor(1) Sensor Input Cable(1) Power Cord (1) ManualFor additional information and the full line of equipment, visit www.equipment.loctite.com.107

LIGHT CURECure Chambers & Flood SystemsCure Chambers &Flood SystemsLoctite® brand chamber and flood systems are modular low and medium intensityultraviolet and high intensity visible light emitting units designed for the batch curingof light curing adhesives and coatings. Selection of a Loctite® brand chamber and floodsystem is based on the required intensity of light and cure area.CURE CHAMBERSLOCTITE ® UVALOC 1000 UV CURE CHAMBERItem Number: 805741The Loctite® UVALOC 1000 UV Cure Chamber, item 805741, is a highperformancemodular curing system consisting of a cure chamber,lamp housing, and controller. The chamber has four rack levels toaccommodate a slide-in tray that allows for easy positioning of parts ofvarious heights and level of optimum exposure. The lamp is shielded bya timed control shutter that eliminates UV exposure to operators duringloading or unloading of parts. A door safety switch prevents openingwhile exposure is in progress.Features:• Typical UV irradiance is up to 110 mW/cm 2 , dependingupon selection of 4-position rack height• Dual power setting of 500 or 1000 watts permits curingof temperature-sensitive parts without damage by heat• Lamp intensity is continually monitored• Low-level output condition can be established to insure optimalcuring performance and notification for lamp replacement• Effective cure area of 6.3 inches wide by 6.3 inches deep (160 mm x 160 mm).• Digital timer allows for setting exposure time from 3 seconds to15 minutes in one-second increments• Pneumatically-operated shutter preventsTECHNICAL SPECIFICATIONSUV exposure to operatorsInput Voltage240 VAC; 50/60 Hz• Safety door interlock switch preventsopening of the door while the shutter is open• Standard lamp included is mercury vapor lamp;365 nm wavelengthPneumatic Supply RequiredPneumatic Supply TubingPower Consumption60 to 90 psi6 mm1,200 watts• Optional iron doped orgallium doped lamps availableDimensions Exterior of UnitCure Chamber12.0" W x 29 1 ⁄4" H x 17.0" D9.0" W x 12" H x 13 3 ⁄4" DCure Area6.3" W x 6.3" DTheory of OperationThe operator places the part inside the chamberand sets the exposure time. This cure time iscontrolled by the built-in timer and can beoperated in a continuous or timed mode. Theoperator then triggers the exposure cycle by a footswitch, panel-mount start button, or PLC interface.Upon completion of timer, the operator removesthe part from the chamber.NEWPartsIncludedReplacement Bulb(1) Cure Chamber, Lamp Housing, and Controller(1) UV Intensity Sensor and Built-InDigital Intensity Display(1) Connecting Cable (from controller to lamp housing)(1) AC Power Cord with pig-tale wire ends(1) Foot Switch870098 – 1,000 W Mercury VaporAdditional Accessories Sold Separately98086 – Loctite ®ZETA ® 7011-ADosimeter-Radiometer(See page 113)98452 – Safety Glasses(protects from 200 to540 nm wavelengths)870097 – Iron Doped Lamp 870096 – Gallium Doped Lamp108For additional information and the full line of equipment, visit www.equipment.loctite.com.

LOCTITE ® ZETA ® 7401 UV CHAMBERItem Number: 98039The Loctite® ZETA® 7401 UV Chamber provides a reliable and economical design for UVcuring and is well suited for most production operations. Excellent for use in confined bondline applications, this medium intensity light source can be used for adhesive applicationswhere high intensity output is not necessary.Features:• Contains a 4", 400 watt metal halide bulb• Designed to emit in the UVA region• Curing area of 8" x 8", and a maximum part height of 4"• Operator’s hands have no direct exposure to UV energy• 1,000 hours of expected UV bulb life with proper handling and maintenance• Convenient pull- out drawer to process parts• Viewing window to observe assemblies in process• The work surface is covered by a special silicone rubberpad to resist UV deterioration and chemical attackTheory of OperationThe unit is operated bysimply placing theassembly into the curedrawer, closing thedrawer, and allowingexposure for thedesired time. A viewingwindow allowsmonitoring of thecuring process.Output1009080706050403020100Spectral Output of a UV Metal Halide Bulb200 300 400 500 600Wavelength in nmUtilitiesLamp Type,(Visible and UV enhanced)DimensionsWeightTECHNICAL SPECIFICATIONS120 VAC; 8 amps; 60 Hz400 watt Metal Halide11.5" H x 10.75" W x 20.1" D39 lbs.Parts Included(1) ZETA ® 7401 UV Chamber(1) Pair Cotton Gloves(1) UV Protective Eyewear(1) Power Cord (1) Manual97246 – UV Lamp - 400 wattReplacement Parts985298 – Loctite ® Silicone Work SurfaceAdditional Accessories Sold Separately98086 –Loctite ® ZETA ® 7011-ADosimeter-Radiometer(See page 113)983050 – Loctite ® VisibleLight EnhancedMetal Halide BulbLIGHT CURECure Chambers &Flood SystemsFLOOD SYSTEMSShown with98420 – OptionalShutter AssemblyPRODUCTLoctite ® ZETA ® 7411-S UV Flood SystemLoctite ® Indigo 7418Visible Light Flood SystemLoctite ® ZETA ® 7420Visible Light Flood SystemItem Number 98413 971031 98060 / 98182*Useful Cure Area 8" x 8" 2" x 4" 12" x 12" TypicalLamp Type Metal Halide Visible Arc Lamp Visible Arc LampOutput Intensity Medium Low HighLamp Power 400 W 400 W 1,500 WOptional Shutter Assembly 98420 N/A N/AOptimized Spectral Output Range UVA Proprietary Visible Blue and GreenReplacement Bulbs(Item Number / Type)97246 – Loctite ® UV Lamp - 400 Watt Metal Halide983050 – Loctite ® Visible Light EnhancedMetal Halide Bulb971028 – Visible Arc Lamp, 400 W 985940 – Visible Arc Lamp, 1,500 WReplacement Filter Glass 988159 971024 985942* 98182 – Loctite ® ZETA ® 7420, is a 230 VAC/50 Hz system.For additional information and the full line of equipment, visit www.equipment.loctite.com.109

Cure Chambers &Flood SystemsLIGHT CURELOCTITE ® ZETA ® 7411-S UV FLOOD SYSTEMItem Number: 98413The Loctite® ZETA® 7411-S UV Flood System is designed for use in a wide range ofbonding, potting, tacking and sealing applications. Because of its reliability andsimplicity, it is well suited for most production operations. The Loctite® ZETA®7411-S can accept multiple part sizes. An optional timed control shutter(as displayed) or visible enhanced metal halide lamp are also available.Features:• Contains a 4", 400 watt metal halide bulb**• Optimized to emit in the UVA region• Typical curing area of 8" x 8"• 1,000 hours of expected UV bulb life with proper handling and maintenance• Power supply can be separated from the lamp base assembly• Lamp height is adjustable to a maximum height of 11 3 ⁄4" from pad• Contains a glass filter to reduce the short andmedium wavelength lamp emissions• The work surface is covered by a special silicone rubber padto resist UV deterioration and chemical attackTheory of OperationShown with98420 – OptionalShutter AssemblyThe operator places the assembly to be bonded into the cure area, allows theassembly to be exposed for the proper time, and manually removes the curedassembly. In addition, the light source can be pulled from thepower supply and mounted over a conveyor belt for a moreautomated use of the equipment.TECHNICAL SPECIFICATIONSUtilities120 VAC; 8 amps; 60 Hz** See page 109 for spectral output chart for a metal halide bulb.Lamp Type,(Visible and UV enhanced)400 watt Metal HalideDimensions27.0" H x 12.7" W x 14.0" DWeight37 lbs.Parts Included(1) Reusable Shipping Box Foam PackagingFor proper eye protection, useItem 98452(1) Height Adjustment for Reflector HousingLoctite® brand ultraviolet(1) Reflector Housing with Flexible UVsafety glasses.Curtain Shield Attached(1) UV Protective Eyewear (1) Cotton Gloves(1) UV Power Supply (1) Power Cord (1) ManualItem 97210Replacement Parts 984967 – Loctite ® Replacement Silicone Work Surface988159 – Loctite ® Replacement Filter Glass988173 – Loctite ® Replacement Light Blocking Curtain97246 – Loctite ® UV Lamp - 400 watt Metal Halide983050* – Loctite ® Visible Light Enhanced Metal Halide BulbAdditional Accessories Sold Separately98086 –Loctite ® ZETA ® 7011-ADosimeter-Radiometer(See page 113)98420 – Loctite ® Time Controlled Shutter985022 – Loctite ® OptionalHead Extension Cable* Optional replacement bulb.110For additional information and the full line of equipment, visit www.equipment.loctite.com.

LIGHT CURE Cure Chambers &Flood SystemsLOCTITE ® INDIGO 7418 VISIBLE LIGHT FLOOD SYSTEMItem Number: 971031The Loctite® Indigo 7418 Visible Light Flood System, item 971031,is a unique visible light flood system designed for curing Loctite®3552 and 3553 Indigo Visible Light Cure Adhesives. This canbe used as a high intensity, benchtop modular light cure system.The lamp can be mounted over existing material handling systemssuch as conveyors. These units can also be stacked side-by-sideto increase the effective curing area. This unit includes anoperations manual, the lamp with reflector housing, andassociated power cords.Features:• Contains a 4 inch, 400 watt visible arc bulb• Optimized to emit in the visible region(greater than 400 nm)• Typical curing area of 2" by 4"• Average irradiance of 225 mW/cm 2 at a 2" distance• 2000 hours of expected bulb life with proper handling• Protective glass to shield the light sourcefrom direct contact• Allows curing through colored substrates• Can achieve cure through depths over 1 ⁄2"Theory of OperationThe operator places the part under the lamp for thepre-determined exposure time. Upon completion of theexposure time, the operator removes the part fromunder the lamp.UtilitiesDimensionsLamp WeightBallast WeightLamp TypeParts IncludedReplacement PartsTECHNICAL SPECIFICATIONS115/230 VAC; 50/60 Hz15.0" L x 5.25" x 8.0" H8.5 lbs.7.5 lbs.400 watt Visible Arc(1) Operations Manual (1) Lamp with Reflector Housing(1) Power Cord (1) Ballast Connection Cord971023 – Loctite ® Replacement Ballast971024 – Loctite ® Replacement Filter Glass971028 – Loctite ® 400 Watt Visible Arc BulbAdditional Accessories Sold Separately98089 – Loctite ® ZETA ®7011-V Dosimeter(See page 113)98452 – Safety Glasses(protects from 200 to540 nm wavelengths)984070 – Pair of Cotton GlovesFor additional information and the full line of equipment, visit www.equipment.loctite.com.111

Cure Chambers &Flood SystemsLIGHT CURELOCTITE ® ZETA ® 7420 VISIBLE LIGHT FLOOD SYSTEMItem Numbers: 98060 and 98182The Loctite® ZETA® 7420 Visible Light Flood Systems (98060 with 120 VAC and98182 with 230 VAC) represent an innovative, extremely cost-effectiveapproach to “high-intensity” curing. These systems are designed for use ina wide range of bonding, potting, tacking and sealing applications. Theirreliability and simplicity are well suited to a variety of productionoperations. Most Loctite® brand light cure adhesives with dual curecapability (UV/Visible) are compatible with these systems, includingLoctite® brand 3103, 3105, 3106, 3107, 3494, 3525,3526, 4304 and 4305 Light Curing Adhesives.Features:• High intensity 1,500 watt bulb – item number 985940• Optimized to emit in the visible blue and green region• Typical curing area of 12" x 12"• 1,000 hours of expected bulb life with proper handlingand maintenance• Lamp and power supply are separate forinstallation flexibility• Lamp includes mounting chains for easyattachment to customer fixtures• Contains a glass filter to reduce the shortand medium wavelength lamp emissionsTheory of OperationThe operator places the bonded assembly into the cure area,allows the assembly to be exposed for the proper time, andmanually removes the cured assembly. In addition, the lightsource can be pulled from the power supply and mountedover a conveyor belt for a more automated use of the equipment.Shielding for the high-intensity visible light must be providedby the customer.UtilitiesLamp Type,(Visible and UV enhanced)DimensionsWeightParts IncludedReplacement PartsTECHNICAL SPECIFICATIONS98060 – 120 VAC;13.5 amps, 60 HzVisible Arc Lamp98182 – 230 VAC;7.0 amps, 50 HzLamp Head: 9.5" H x 23.6" W x 20.75" DPower Supply: 8.95" H x 7.75" W x 14.9" D80 lbs.(1) Lamp with Bulb and Filter Glass(1) Power Supply (1) Manual985934 – Loctite ® Replacement Ballast (120 VAC; 60 Hz)985940 – Loctite ® Visible Arc Bulb, 1,500 watt985942 – Loctite ® Replacement Safety Glass, TemperedAdditional Accessories Sold Separately98089 –Loctite ® ZETA ® 7011-V Dosimeter-Radiometer(See page 113)112For additional information and the full line of equipment, visit www.equipment.loctite.com.

Light MetersDecreased radiant power related to the degradation of UV lamps, light guides and reflectors results in declinesin process efficiency or incomplete curing of UV light curing products. Loctite® ZETA® Light Meters are used tocheck the intensity of ultraviolet light emitted from a light source. These units are useful for quality measures,maintenance, and troubleshooting of ultraviolet emitting light sources. Selection of a Loctite® ZETA® LightMeter is based on the type of light source that is required to be measured.LIGHT CURE Light MetersLOCTITE ® ZETA ® 7011-A DOSIMETER-RADIOMETER Item Number: 98086LOCTITE ® ZETA ® 7011-V DOSIMETER-RADIOMETER Item Number: 98089The Loctite® ZETA® 7011-A and 7011-V Dosimeter-Radiometers are self-contained, electro-optic metersthat measure and display total energy (J/cm 2 ) and irradiance (W/cm 2 ). They are designed to withstandthe extremes of UV light and high temperature that are part of the UV curing environment. Thecarefully designed optical sensing system measures only certain wavelengths, rejecting those that arenot relevant to the process. The output of the sensing system is converted to digital form and displays aliquid crystal readout. The Loctite® ZETA® 7011-A measures across the ultraviolet spectrum from 320 to400 nanometers (UVA region). The Loctite® ZETA® 7011-V measures across the ultraviolet spectrum from350 to 500 nanometers (UVV region). These units are designed to monitor the performanceof a light curing system.Features:• Measures energy and irradiance lampperformance to determine lamp efficiency• Establishes energy and irradiance level forproper curing when implementing a new process• Calibration is required only once per year• Meets ISO-9000 requirements by providinga device that will allow for recordingof lamp performance data• Dual display of energy and irradianceallows for convenient, same screen viewing• Centrally located sensor allows for easy alignment• Calibration is traceable to theNational Institute of StandardTechnology (NIST)OperatingTemperatureTheory of OperationAn operator will turn the radiometeron, reset the unit, and place the eyeof the unit under the light source forno more than 5 seconds. The readingwill be displayed on the liquidcrystal readout.TECHNICAL SPECIFICATIONS0°C to 75°C internal temperatureNote: tolerates much higher external temperatures for short periods;audible alarm indicates when temperature is too high.5 minutes (if no buttons are pressed)4 digit LCDAutomatic Shut-offDisplayMeasured Spectral 98086 – ZETA ® 7011-ARange320 to 400 nmDimensions4" L x 4" W x 0.52" DWeight 8.6 oz. (245 g)Power SourceTwo AAA alkaline batteries (not included)Typical Battery Life3,000 readings or 2,000 hoursCase MaterialAluminum, stainless steelUsed To MeasureOutput of98086: Chambers,Conveyors, Flood Systems98089 – ZETA ® 7011-V350 to 500 nm98089: Chambers, Conveyors,Flood Systems, LED Light Sources(1) ZETAParts Included® 7011-A or 7011-V Dosimeter-Radiometer(1) ManualAdditional Accessories Sold Separately1007349 – Loctite ® CureJet LED Dosimeter Adapter [Requires 98089] (See page 102)98453 – Adapter for LED intensity measurementFor additional information and the full line of equipment, visit www.equipment.loctite.com.113

Light MetersLIGHT CURELOCTITE ® ZETA ® 7021 SPOT RADIOMETERItem Number: 98048The Loctite® ZETA® 7021 Spot Radiometer is a self-contained, electro-optic instrument designed to measure and displaythe UV irradiance emitted by a UV spot curing system. The units displayed are watts per square centimeter (W/cm 2 ).Decreased radiant power related to the degradation of UV lamps, light guides, and reflectors canresult in declines in process efficiency or incomplete curing of UV light curing products. TheLoctite® ZETA® 7021 is designed to provide the operator with instant feedback as to theperformance of the spot curing system. It accepts both 3 mm and 5 mm diameter wands.The unique detachable sensor head requires re-calibration only once per year (vs. every6 months for competitive models). Requires a 9 volt alkaline battery (not included).Features:• Measures UV wand curing system performance• Measures UV lamp performance• Measures light guide degradation• Optimizes dual light guide balancing• Determines proper UV intensity required for curing various materials• Meets ISO-9000 requirements• Calibration is traceable to the National Institute of Standard Technology (NIST)Theory of OperationAn operator will place the UV wand in the opening of the sensor head.The light to be measured will be emitted for approximately 2 to 4 seconds.The reading will immediately be displayed.TECHNICAL SPECIFICATIONSRadiant Power Range 0 to 19.99 W/cm 2Resolution 0.01 W/cm 2AccuracyDisplayReading Exposure TimeSpectral RangePower SourceDimensionsWeightUsed to Measure Output ofParts Included± 5% typical / ± 10% maximum1.0" W x 0.5" H LCD2 to 4 seconds280 to 400 nm (UVA & B region)9 volt alkaline battery (not included)3.0" H x 2.5" W x 1.2" D0.4 lbs.3 mm and 5 mm diameter Wands(1) ZETA ® 7021 Spot Radiometer(1) ManualAdditional Accessories Sold Separately98633 / 98317A / 98157A / 98450 – Loctite ® ZETA ® or Indigo UV Wand Systems114For additional information and the full line of equipment, visit www.equipment.loctite.com.

Cure ConveyorsLoctite® brand cure conveyors are used for continuous or batch processing of assemblies.Each conveyor has a unique set of features designed to meet the challenges of benchtopcuring of light curing adhesives and coatings. Selection of a Loctite® brand cureconveyor is based on the part size, and the required lamp for optimum cure.LIGHT CURE Cure ConveyersLOCTITE ® ZETA ® 7415 UV BENCHTOP CONVEYORItem Number: 98003The Loctite® ZETA® 7415 UV Benchtop Conveyor offers variable speed adjustment for low to mediumvolume production and is designed for use with an electrodeless bulb and a parabolic reflector to createa uniform cure area. The lamp assembly, conveyor, and power supply are ordered separately. The systemcan be integrated into an automatic or semi-automatic production line for cure-on- demand assembly.Features:• Conveyor speeds from 3.3 to 23 feetper minute or 0.3 to 7.2 feet per minute• Typical curing area width of 6 inches• Lamp orientation and height areadjustable for variable cure focal points• Integrated modular blowerfor lamp coolingTheory of OperationAn operator will assemble the desired partswith a light curing adhesive or sealant,place the assembly on the conveyor with apreset belt speed and lamp height, and allowthe assembly to pass through the conveyor to theother side, where the assembly should be removed.TECHNICAL SPECIFICATIONSConveyor Utilities117 VAC single phase, 1 amp, 50 to 60 Hz or canbe configured for 230 VAC single phase98004* PowerSupply Utilities208 VAC single phase; 18 amps; 50/60 Hz98005* PowerSupply Utilities240 VAC single phase; 18 amps; 50/60 HzMaximum Part Size7.5" W x 3" HConveyor Size27.4" H x 42" W x 20" DConveyor Weight85 lbs.Power Supply Size8" H x 19.9" W x 23" DUseful Cure Area 6" x 6"Optimized SpectralOutput RangeUVA, B, C*Parts Included(1) Loctite ® ZETA ® 7415 UV Benchtop Conveyor*(1) Ultraviolet Protection Glasses (1) ManualAdditional Accessories Sold Separately98086 – Loctite ®ZETA ® 7011-ADosimeter-Radiometer98089 – Loctite ®ZETA ® 7011-VDosimeter-Radiometer983466 – Loctite ® Air Deflection Kit, High Grade Quartz983465 – Loctite ® Sight Shield, Snap In, Tunnel Style983464 – Loctite ® Sight Shield, Snap In, Box End Style983462 – Loctite ® Exhaust Plenum983471 – Loctite ® Fusion V Bulb - 300 W/in.983469 – Loctite ® Fusion D Bulb - 300 W/in.983470 – Loctite ® Fusion H Bulb - 300 W/in.* The lamp assembly is sold separately; see the Light Sources section for more details on pages 117-118.For additional information and the full line of equipment, visit www.equipment.loctite.com.115

Cure ConveyersLIGHT CURELOCTITE ® ZETA ® 7610 UV BENCHTOP CONVEYORItem Number: 98588The Loctite® ZETA® 7610 is a benchtop, ultraviolet curing conveyor used tocure light cure adhesives and coatings. This conveyor has a medium pressuremercury arc lamp which produces high-intensity ultraviolet energy in theUVA, UVB, and UVC spectral region. This system can be integrated into anautomatic or semi-automatic production line for cure-on-demand assembly.Features:• 6 inch, medium pressure mercury arc lamp• Lamp height can be adjusted to vary intensity• Variable bulb wattage: 150 or 300 watts per inch toaccommodate heat sensitive applications• Optimized to emit in the UVA, UVB, and UVC regions• Typical curing width 6 5 ⁄8" with 6" maximum part height• 1,000 hours of expected UV bulb life withproper handling and maintenance• Variable conveyor speed up to 56 feet per minute• Vacuum hold down for lightweight substratesTheory of OperationThe Loctite® ZETA® 7610 is a benchtop, ultraviolet curingconveyor used to cure light cure adhesives and coatings.This conveyor has a medium pressure mercury arc lamp whichproduces high-intensity ultraviolet energy in the UVA, UVB, andUVC spectral region. This system can be integrated into anautomatic or semi-automatic production line for cure-ondemandassembly.Gamma RaysThe Electromagnetic Spectrum10 4 100 1 1/100 10 -5 eVUVUVVisibleLight10 -2 10 -1 10 1 10 3 10 4 10 5 nmVisibleLightRadiationEnergyInfra-Red Microwaves RadiowavesWavelengthVUV UVC UVB UVA Blue Green Yellow Red100 200 300 400 500 600 700nmInput Power RequiredPower Consumption at300 W/in. SettingBeltMaximum Part Weight:Belt speed range(Minimum to Maximum)LampMaximum Part Cross SectionDimensionsWeightParts IncludedReplacement BulbTECHNICAL SPECIFICATIONS120 VAC; 1 phase; 50/60 Hz; fused for 21 ampsApproximately 2,200 watts304 stainless steel wire3 pounds1 to 20.0 inch/second60 to 1,200 inch/minute0 to 56 feet/minute1,800 watt Medium Pressure Mercury Arc Lamp6" H x 6.625" W31.6" H x 31.8" W x 23.8" D145 lbs.(1) Loctite ® ZETA ® 7610 UV Benchtop Conveyor(1) Ultraviolet Lamp(1) Ultraviolet Protection Glasses(1) Pair of Cotton Gloves (1) Manual98649 – Replacement 6" UV Bulb - 300 W/in.Additional Accessories Sold Separately98086 – Loctite ® ZETA ® 7011-ADosimeter-Radiometer116For additional information and the full line of equipment, visit www.equipment.loctite.com.

Light SourcesOur light sources and power supplies provide high intensity ultraviolet light for curinglight cure adhesives and coatings. These units are designed to be integrated into aLoctite® brand conveyor system, or used when the end user provides the conveyor andshielding requirements. Selection of a light source and power supply is based on thebulb type, electrical requirements, and the desired part movement.LIGHT CURE Light SourcesLOCTITE ® ELECTRODELESS LAMP ASSEMBLY AND POWER SUPPLYItem Numbers: 98004 – 208 VAC single phase, 10 amps, 50/60 HzItem Numbers: 98005 – 240 VAC single phase, 10 amps, 50/60 HzThe Loctite® Electrodeless Lamp Assembly comes equipped with a long life 6 inch “H” bulb. The lightsource is compatible with “D”, “V”, “H” and “H+” bulbs to tailor the spectral output of the light to theapplication. Selection of the 98004 or 98005 is based on the electrical capabilities available to the enduser. The Loctite® Electrodeless Lamp Assembly is typically used with the Loctite® ZETA® 7415 UVBenchtop Conveyor.Features:• Designed for use with the Loctite® ZETA® 7415 UV Benchtop Conveyor• Electrodeless bulb technology provides high intensity output• The system is shipped standard with an “H” bulb, but will accept “D”, “V” or“H+” bulbs to fine tune lamp spectral output• 5,000 hours of expected UV bulb life of the “H” bulb, with proper handling and maintenance• High UV output with low IR output results in less heat to the substrateTheory of OperationAn operator will assemble parts witha light curing adhesive or coating andmanually or automatically place thepart under the lamp for cure. Shieldingis obtained through the use of thisassembly with a Loctite® ZETA® 7415Benchtop Conveyor. If used elsewhere,shielding must be provided bythe customer.TECHNICAL SPECIFICATIONS20Spectral Output of “H” BulbPower Supply98004208 VAC single phase;18 amps; 50/60 Hz98005240 VAC single phase;18 amps; 50/60 HzLampFusion H Bulb - 300 W/in.Dimensions19.9" H x 6.6" W x 10.3" DParts Included(1) Fusion Lamp Assembly and Power Supply(1) ManualReplacement Bulb 983470 – Fusion H Bulb - 300 W/in.Additional Accessories Sold SeparatelyWatts per inch1612840200 250 300 350 400 450Wavelength in nm98086 – Loctite ®ZETA ® 7011-ADosimeter-Radiometer983471 –Fusion V Bulb - 300 W/in.983469 –Fusion D Bulb - 300 W/in.983470 –Fusion H Bulb - 300 W/in.For additional information and the full line of equipment, visit www.equipment.loctite.com.117

Light SourcesLIGHT CURELOCTITE ® HIGH INTENSITY ULTRAVIOLET SOURCESItem Numbers: 980160 and 982440The Loctite® High Intensity Ultraviolet Sources are designed for a wide range of applications using ultraviolet curing adhesives andcoatings. With the proper shielding, cooling and venting (not included with this product), this light source can be integrated intoboth prototype and production applications. This unit is designed specifically for the user who wants to integrate their ownshielding, cooling, venting and mounting systems into a production line. A 220 VAC, 50 Hz unit is available as item 982440.Features:• Contains a 5 inch, 300 watts/inch medium pressure mercury vapor bulb – Item Number 980161• Variable bulb wattage: 200 or 300 watts/inch• Designed to emit in the UVA and UVB regions• Typical curing area of 4.5" x 6"• 1,000 hours of expected UV bulb life with properhandling and maintenanceTheory of OperationTo assemble a component with a UV curing adhesive or coating,place and remove the part manually or automatically under thelight source. The customer will provide their own mounting,shielding, cooling, and venting for this unit.Spectral Output of a Medium Pressure Mercury Arc BulbOutput UV in W100908070605040302010180 200 220 240 260 280 300 320 340 360 380 400 420 450Wavelength in nmFor proper eye protection, useLoctite® brand ultravioletsafety glasses.Item 97210Item 98452Power SupplyPower ConsumptionLampLamp Unit SizePower Supply SizeLamp Unit WeightPower Supply WeightParts IncludedReplacement BulbTECHNICAL SPECIFICATIONS980160 115 VAC; 60 Hz; 15 amp982440 220 VAC; 50 Hz; 7.5 amp2,000 Watts300 watt Medium Pressure Mercury Arc Lamp15.18" L x 8.7" W x 7.4" H15.0" L x 14.7" W x 12.1" H9 lbs.45 lbs.(1) High Intensity UV Source(1) Ultraviolet Protection Glasses (1) Manual980161 – Replacement 5" UV Bulb - 300 W/in.Additional Accessories Sold Separately98086 – Loctite ® ZETA ® 7011-ADosimeter-Radiometer118For additional information and the full line of equipment, visit www.equipment.loctite.com.

Index119INDEXFor additional information and the full line of equipment, visit www.equipment.loctite.com.ITEMNUMBER PRODUCT NAME PAGE NUMBERITEMNUMBER PRODUCT NAME PAGE NUMBER39633 Loctite® 400 ml Mix Nozzle for 39635 Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8439635 Loctite® Fixmaster® Rapid Rubber Repair Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2846551 Loctite® 404 Quick Set Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . . . . . .9774126 Loctite® Water Proofing Solvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9775326 Loctite® Clean-Up Solvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9797001 Loctite® 250 ml Hand Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2497002 Loctite® 300 ml Pneumatic Cartridge Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2997006 Loctite® Precision Syringe Dispensing System . . . . . . . . . . . . . . . . . .5, 11, 12, 87, 88, 89, 90, 9197007 Loctite® Integrated Semi-AutomaticDispenser, 0 to 100 psi . . . . . . . . . . . . . . . . .15, 19, 59, 61, 65, 66, 67, 68, 71, 87, 88, 89, 90, 9197010 Loctite® Integrated Semi-AutomaticDispenser, 0 to 15 psi . . . . . . . . . . . . . . . . . .15, 19, 59, 61, 65, 66, 67, 68, 71, 87, 88, 89, 90, 9197017 Loctite® Integrated Semi-Automatic Dispenserwith Low Level Sensor, 0 to 100 psi . . . . . . .15, 19, 59, 61, 65, 66, 67, 68, 71, 87, 88, 89, 90, 9197020 Loctite® Integrated Semi-Automatic Dispenserwith Low Level Sensor, 0 to 15 psi . . . . .15, 16, 19, 59, 61, 65, 66, 67, 68, 71, 87, 88, 89, 90, 9197042 Loctite® 50 ml Dual Cartridge Pneumatic Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2697101 Loctite® Digital Dispense Controller . . . . . . . . . . . . . . . . . . . . . .15, 18, 59, 61, 65, 66, 67, 68, 7197111 Loctite® Hand Held Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58, 60, 6397112 Loctite® Hand Held Pneumatic Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58, 61, 6397113 Loctite® Stationary Applicator Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 65, 73, 77, 7997114 Loctite® Stationary Applicator Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 65, 73, 77, 7997115 Loctite® Electric Rotorspray for use with 97123 . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 16, 65, 6897116 Loctite® Hand Held Pneumatic Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58, 61, 6397118 Loctite® Advancing Slide for use with 97123, 50 mm stroke . . . . . . . . . . . . . . . . . . . . .15, 16, 6897119 Loctite® Advancing Slide for use with 97123, 100 mm stroke . . . . . . . . . . . . . . . . . . . .15, 16, 6897120 Loctite® Air Filter and Regulator for 97123 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497123 Loctite® Single Channel Automatic Controller . . . . . . . . . . . . . . .15, 16, 59, 65, 66, 67, 68, 71, 7997130 Loctite® LV Hand Held Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58, 59, 6397131 Loctite® Vari-Drop Applicator with Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58, 62, 6397132 Loctite® Vari-Drop Applicator without Tubing . . . . . . . . . . . . . . . . . . . . . . . . .58, 62, 63, 84, 8597135 Loctite® Diaphragm Valve, 2 mm Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 68, 7397136 Loctite® Diaphragm Valve, 3 mm Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 68, 7397141 Loctite® Posi-Link 200-400 Static Mixer Pinch Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . .31, 8497200 Loctite® Valve Body Adapter - for 98009 and 98013 dispense valves . . . . . . . . . . . . . . . . . . . .7997201 Loctite® Replacement Foot Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84, 10197207 Loctite® 10 ml Clear Syringe Barrel Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8397208 Loctite® 10 ml Syringe Air Line Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 66, 8397210 Loctite® Ultraviolet Safety Glasses, Grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 103, 11097211 Loctite® In-Line Flow Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 7997215 Loctite® Cartridge-Syringe Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197216 Loctite® 10 ml Syringe Starter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 8397220 Loctite® 3/8" Feed Line Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60, 61, 62, 8497221 Loctite® 16 Gauge, Grey, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197222 Loctite® 18 Gauge, Green, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197223 Loctite® 20 Gauge, Pink, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197224 Loctite® 22 Gauge, Blue, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197225 Loctite® 15 Gauge, 1/2", Stainless Steel, Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197226 Loctite® 18 Gauge, 1/2", Stainless Steel, Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197227 Loctite® 20 Gauge, 1/2", Stainless Steel, Pink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197228 Loctite® 25 Gauge, 1/2", Stainless Steel, Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197229 Loctite® 15 Gauge, Amber, Helical Thread, flexible polypropylene . . . . . . . . . . . . . . . . . . . . . . .8197230 Loctite® 18 Gauge, Green, Helical Thread, flexible polypropylene . . . . . . . . . . . . . . . . . . . . . . .8197231 Loctite® 20 Gauge, Pink, Helical Thread, flexible polypropylene . . . . . . . . . . . . . . . . . . . . . . . . .8197232 Loctite® 25 Gauge, Red, Helical Thread, flexible polypropylene . . . . . . . . . . . . . . . . . . . . . . . . .8197233 Loctite® Luer-Lok® Adapter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81, 8497234 Loctite® Replacement Finger Level for 97111 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497235 Loctite® Replacement Actuator for 97112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497236 Loctite® Replacement Actuator for 97116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497238 Loctite® 25 Gauge, Stainless Steel, PTFE Lined, ID 0.58 mm, Pink . . . . . . . . . . . . . . . . . . . . . .8197239 Loctite® Replacement Shut-Off Valve Assembly for 97113 . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497240 Loctite® Replacement Shut-Off Valve Assembly for 97114 . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497242 Loctite® Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497244 Loctite® 30 ml Clear Syringe Barrel Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 8397245 Loctite® 55 ml Syringe Air Line Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 66, 8397246 Loctite® Replacement UV Lamp for 98027 or 98039 – 400 W/in. . . . . . . . . . . . . . . . . . .109, 11097248 Loctite® Dispense Needle Tip Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197249 Loctite® Vari-Drop Applicator Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84, 8597251 Loctite® Replacement Rupture Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497254 Loctite® Diaphragm Valve – Actuator Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497261 Loctite® 15 Gauge, High Density Polyethylene, I.D. 1.25 mm, White . . . . . . . . . . . . . . . . . . . . .8197262 Loctite® Needle Assortment Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62, 8197263 Loctite® 10 ml Black Syringe Barrel Kit for UV Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8397264 Loctite® 30 ml Black Syringe Barrel Kit for UV Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8397268 Loctite® Diaphragm Valve Shut-Off – 2 mm replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497269 Loctite® Diaphragm Valve Shut-Off – 3 mm replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497271 Loctite® Diaphragm Replacement Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497291 Loctite® Replacement Actuator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497293 Loctite® Finger Switch, LV Hand Held Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5997294 Loctite® 30 ml Syringe Starter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 8397295 Loctite® Valve Body Adapter - for 97113 and 97114 dispense valves . . . . . . . . . . . . . . . . . . . .7997326 Loctite® UV Single Light Guide, Enhanced UVC, 5 mm x 1000 mm . . . . . . . . . . . . . . . . . . . . .10797328 Loctite® UV DUAL Light Guide, Enhanced UVC, 3 mm x 1000 mm . . . . . . . . . . . . . . . . . . . . . .10797511 Loctite® Tri-Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8197541 Loctite® Replacement Tube Inserts (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3197902 Loctite® Repair Kit for LV Hand Held Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497960 Loctite® Pneumatic Tubing, 4 mm OD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497970 Loctite® 3/8" Black PTFE Lined Feed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8597972 Loctite® 1/4" Black PTFE Lined Feed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8597973 Loctite® Pneumatic Tubing, 6 mm OD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8497999 Loctite® Replacement Valve Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498003 Loctite® ZETA® 7415 UV Benchtop Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 11598004 Fusion 208V Lamp Assembly and Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 11798005 Fusion 240V Lamp Assembly and Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 11798009 Loctite® Light Cure Dispense Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 67, 73, 77, 7998011 Loctite® Hysol Reactive Urethane Cartridge Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . .43, 4798012 Loctite® Cartridge Pre-Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47, 4998013 Loctite® Cyanoacrylate Dispense Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 67, 73, 7998022 Loctite® 300 ml Cartridge Pusher . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 21, 61, 62, 65, 67, 7198026 Loctite® 30 ml Manual Syringe Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2598033 Loctite® Hysol 075 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 4598034 Loctite® Hysol 075-LT Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 4598035 Loctite® Hysol 175 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 4798036 Loctite® Hysol 175-AIR Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 4698037 Loctite® Hysol 175-SPRAY Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 4698039 Loctite® ZETA® 7401 UV Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 10998040 Loctite® Hysol 175-AIR-HT Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 4698041 Loctite® Hysol 175-SPRAY-HT Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 4698042 Loctite® Hot Melt Bench Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 46, 4898043 Loctite® Hot Melt Pneumatic Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 46, 4898048 Loctite® ZETA® 7021 Spot Radiometer . . . . . . . . . . . . . . . . . . . . . . .99, 103, 105, 106, 107, 11498049 Loctite® Foot Pedal Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,1298050 Loctite® Foot Pedal Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,1298060 Loctite® ZETA® 7420 Visible Light Flood System, 120 VAC . . . . . . . . . . . . . . . . . . . .99, 109, 11298061 Loctite® 16 Gauge, Grey, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198062 Loctite® 18 Gauge, Green, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198063 Loctite® 20 Gauge, Pink, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198064 Loctite® 22 Gauge, Blue, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198065 Loctite® 15 Gauge, 1⁄2", Stainless Steel, Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198066 Loctite® 18 Gauge, 1/2", Stainless Steel, Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198067 Loctite® 20 Gauge, 1/2", Stainless Steel, Pink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198068 Loctite® 25 Gauge, 1/2", Stainless Steel, Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198069 Loctite® 15 Gauge, Amber, Helical Thread, Flexible Polypropylene . . . . . . . . . . . . . . . . . . . . . . .8198070 Loctite® 18 Gauge, Green, Helical Thread, Flexible Polypropylene . . . . . . . . . . . . . . . . . . . . . . .8198071 Loctite® 20 Gauge, Pink, Helical Thread, Flexible Polypropylene . . . . . . . . . . . . . . . . . . . . . . . .8198073 Loctite® 25 Gauge, Red, PTFE Lined, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198074 Loctite® 15 Gauge, White, HD Polyethylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198079 Loctite® Shot Miser Valve Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 15, 18, 59, 6898080 Loctite® 22 Gauge, 1/2", Stainless Steel, Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198082 Loctite® 25 Gauge, Red, Helical Thread, Flexible Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . .8198083 Loctite® Fluorescence Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7898084 Loctite® Micro Needle Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 66,7398085 Loctite® Shot Miser Dispense Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 64, 71, 7498086 Loctite® ZETA® 7011-A Dosimeter-Radiometer . . . . .99, 108, 109, 110, 113, 115, 116, 117, 11898089 Loctite® ZETA® 7011-V Dosimeter-Radiometer . . . . . . . . .99, 100, 101, 102, 111, 112, 113, 11598090 Loctite® Shot Miser 1 Liter Reservoir, 0 to 100 psi . . . . . . . . . . . . . . . . . . . . .8, 15, 22, 59, 6898091 Loctite® Micro Needle Valve Rod Replacement kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498094 Loctite® Toggle Valve for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498099 Loctite® Precision Filter and Regulator for use with 98084 . . . . . . . . . . . . . . . . . . . . . . . . . . . .6698100 Loctite® 22 Gauge, 1/2", Stainless Steel, Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198101 Loctite® Lens, 50 mm Distance, for use with 98083 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7898102 Loctite® Lens, 9 mm Distance, for 98083 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7898103 Loctite® Lens, 28 mm Distance, for 98083 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7898104 Loctite® 30 Gauge, 1/2", Stainless Steel, Lavender, Helical Thread . . . . . . . . . . . . . . . . . . . . . .8098105 Loctite® 30 Gauge, 1/2", Stainless Steel, Lavender, Helical Thread . . . . . . . . . . . . . . . . . . . . . .8098114 Loctite® 32 Gauge, 1/4", Stainless Steel, Yellow, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098115 Loctite® 32 Gauge, 1/4", Stainless Steel, Yellow, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098122 Loctite® 30 ml Syringe Barrel, Black (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598125 Loctite® 3 ml Syringe Piston (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598126 Loctite® Foot Pedal for 98079 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498127 Loctite® 10 ml Syringe Piston (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598128 Loctite® Cartridge Dispense Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198129 Loctite® Pressure Regulator for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498130 Loctite® Pressure Gauge for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498131 Loctite® Hysol Bulk-12 Hot Melt System, 115V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 5298132 Loctite® Hysol Bulk-12 Hot Melt System, 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 5298133 Loctite® Hysol Bulk-14 Hot Melt System, 115V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 5398134 Loctite® Hysol Bulk-14 Hot Melt System, 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 5398135 Loctite® Hysol Bulk-34 Hot Melt System, 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 5498136 Loctite® Hysol Hand Held Top Inlet Applicator, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5598137 Loctite® Hysol Hand Held Top Inlet Applicator, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5598138 Loctite® Hysol Hand Held Bottom Inlet Applicator, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . .5598139 Loctite® Hysol Hand Held Bottom Inlet Applicator, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . .5598140 Loctite® Hysol 2 Hand Applicator, 115 VAC / 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5598141 Loctite® Hysol 2 Hand Applicator, 230 VAC with 230 VAC Control Coil . . . . . . . . . . . . . . . . . .5598142 Loctite® Hysol 2 Hand Applicator, 230 VAC with 115 VAC Control Coil . . . . . . . . . . . . . . . . . .5598143 Loctite® Hysol 2 Hand Applicator, 115 VAC with 24 VDC Control Coil . . . . . . . . . . . . . . . . . . .5598144 Loctite® Hysol 2 Hand Applicator, 230 VAC with 24 VDC Control Coil . . . . . . . . . . . . . . . . . . .5598145 Loctite® Hysol Mounted Applicator, 230 VAC with 24 VDC Control Coil . . . . . . . . . . . . . . . . . .5598146 Loctite® Hysol Mounted Applicator, 115 VAC with 24 VDC Control Coil . . . . . . . . . . . . . . . . . .55

120INDEXFor additional information and the full line of equipment, visit www.equipment.loctite.com.ITEMNUMBER PRODUCT NAME PAGE NUMBERITEMNUMBER PRODUCT NAME PAGE NUMBER98147 Loctite® Hysol Mounted Applicator, 115 VAC with 115 VAC Control Coil . . . . . . . . . . . . . . . . .5598148 Loctite® Hysol Mounted Applicator, 230 VAC with 230 VAC Control Coil . . . . . . . . . . . . . . . . .5598149 Loctite® Hysol Mounted Applicator, 230 VAC with 115 VAC Control Coil . . . . . . . . . . . . . . . . .5598157A Loctite® ZETA® 7740 Light Cure Wand System . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 106, 11498158 Loctite® Hysol 2 Event Timer, 115/230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5698159 Loctite® Hysol 4 Event Timer, 115/230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5698160 Loctite® Foot Switch, Bulk Hot Melt System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5798161 Loctite® Hysol Spray Controller, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5698162 Loctite® Hysol Spray Controller, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5698163 Loctite® 14 Gauge, 1.5", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098164 Loctite® 14 Gauge, 1.5", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098165 Loctite® 15 Gauge, 1.5", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098166 Loctite® 15 Gauge, 1.5", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098167 Loctite® 18 Gauge, 1.5", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098168 Loctite® 18 Gauge, 1.5", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098169 Loctite® 20 Gauge, 1.5", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098170 Loctite® 20 Gauge, 1.5", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098171 Loctite® 21 Gauge, 1.5", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098172 Loctite® 21 Gauge, 1.5", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098173 Loctite® 22 Gauge, 1.5", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098174 Loctite® 22 Gauge, 1.5", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098175 Loctite® 23 Gauge, 1.5", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . . . . . .8098176 Loctite® 23 Gauge, 1.5", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . . . . .8098177 Loctite® 25 Gauge, 1.5", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098178 Loctite® 25 Gauge, 1.5", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098179 Loctite® 27 Gauge, 1.5", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098180 Loctite® 27 Gauge, 1.5", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098181 Loctite® 300 ml Cartridge – Tube Fitting Adapter, for 984832 / 984833 (3 pack) . . . . . . . . . . . .8198182 Loctite® ZETA® 7420 Visible Light Flood System, 230 VAC . . . . . . . . . . . . . . . . . . . .99, 109, 11298192 Loctite® Manual Plunger for 10 ml Syringe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2598193 Loctite® Manual Plunger for 30 ml Syringe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2598196 Loctite® 18 Gauge, 1/4", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098197 Loctite® 18 Gauge, 1/4", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098198 Loctite® 20 Gauge, 1/4", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098199 Loctite® 20 Gauge, 1/4", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098200 Loctite® 21 Gauge, 1/4", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098201 Loctite® 21 Gauge, 1/4", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098208 Loctite® 14 Gauge, 1/2", Stainless Steel, Olive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198209 Loctite® 14 Gauge, 1/2", Stainless Steel, Olive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198210 Loctite® 21 Gauge, 1/2", Stainless Steel, Purple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198211 Loctite® 21 Gauge, 1/2", Stainless Steel, Purple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198212 Loctite® 23 Gauge, 1/2", Stainless Steel, Orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198213 Loctite® 23 Gauge, 1/2", Stainless Steel, Orange, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198214 Loctite® 27 Gauge, 1/2", Stainless Steel, Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198215 Loctite® 27 Gauge, 1/2", Stainless Steel, Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198216 Loctite® 14 Gauge, 1", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098217 Loctite® 14 Gauge, 1", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098218 Loctite® 15 Gauge, 1", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098219 Loctite® 15 Gauge, 1", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098222 Loctite® 18 Gauge, 1", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098223 Loctite® 18 Gauge, 1", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098224 Loctite® 20 Gauge, 1", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .8098225 Loctite® 20 Gauge, 1", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .8098226 Loctite® 21 Gauge, 1", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098227 Loctite® 21 Gauge, 1", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098228 Loctite® 22 Gauge, 1", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .8098229 Loctite® 22 Gauge, 1", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .8098230 Loctite® 23 Gauge, 1", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098231 Loctite® 23 Gauge, 1", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098232 Loctite® 25 Gauge, 1", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . .8098233 Loctite® 25 Gauge, 1", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . .8098234 Loctite® 27 Gauge, 1", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .8098235 Loctite® 27 Gauge, 1", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .8098236 Loctite® 14 Gauge, 45°, 1/2", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . .8098237 Loctite® 14 Gauge, 45°, 1/2", Stainless Steel White, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098238 Loctite® 14 Gauge, 90°, 1/2", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . .8098239 Loctite® 14 Gauge, 90°, 1/2", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . .8098240 Loctite® 15 Gauge, 45°, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . .8098241 Loctite® 15 Gauge, 45°, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . .8098242 Loctite® 15 Gauge, 90°, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . .8098243 Loctite® 15 Gauge, 90°, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . .8098244 Loctite® 18 Gauge, 45°, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098245 Loctite® 18 Gauge, 45°, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . .8098246 Loctite® 18 Gauge, 90°, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098247 Loctite® 18 Gauge, 90°, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . .8098248 Loctite® 20 Gauge, 45°, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098249 Loctite® 20 Gauge, 45°, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098250 Loctite® 20 Gauge, 90°, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098251 Loctite® 20 Gauge, 90°, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098252 Loctite® 21 Gauge, 45°, 1/2", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . .8098253 Loctite® 21 Gauge, 45°, 1/2", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . .8098254 Loctite® 21 Gauge, 90°, 1/2", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . .8098255 Loctite® 21 Gauge, 90°, 1/2", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . .8098256 Loctite® 22 Gauge, 45°, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098257 Loctite® 22 Gauge, 45°, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098258 Loctite® 22 Gauge, 90°, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098259 Loctite® 22 Gauge, 90°, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098260 Loctite® 23 Gauge, 45°, 1/2", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . .8098261 Loctite® 23 Gauge, 45°, 1/2", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . .8098262 Loctite® 23 Gauge, 90°, 1/2", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . .8098263 Loctite® 23 Gauge, 90°, 1/2", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . .8098264 Loctite® 25 Gauge, 45°, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . .8098265 Loctite® 25 Gauge, 45°, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . .8098266 Loctite® 25 Gauge, 90°, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098267 Loctite® 25 Gauge, 90°, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . .8098268 Loctite® 27 Gauge, 45°, 1/2", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098269 Loctite® 27 Gauge, 45°, 1/2", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098270 Loctite® 27 Gauge, 90°, 1/2", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098271 Loctite® 27 Gauge, 90°, 1/2", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . .8098272 Loctite® 14 Gauge, Tan, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198273 Loctite® 14 Gauge, Tan, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198277 Benchtop Fume Filtration System with Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9698279A Loctite® 203 Benchtop Robot, 200 x 200 mm, 3 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 8798280A Loctite® 203 Benchtop Robot, 200 x 200 mm, 3 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 8798281A Loctite® 203 Benchtop Robot, 200 x 200 mm, 3 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 8798282A Loctite® 203 Benchtop Robot, 200 x 200 mm, 3 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 8798283A Loctite® 204 Benchtop Robot, 200 x 200 mm, 4 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 8798284A Loctite® 204 Benchtop Robot, 200 x 200 mm, 4 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 8798285A Loctite® 204 Benchtop Robot, 200 x 200 mm, 4 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 8798286A Loctite® 204 Benchtop Robot, 200 x 200 mm, 4 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 8798287A Loctite® 303 Benchtop Robot, 300 x 320 mm, 3 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 8898288A Loctite® 303 Benchtop Robot, 300 x 320 mm, 3 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 8898289A Loctite® 303 Benchtop Robot, 300 x 320 mm, 3 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 8898290A Loctite® 303 Benchtop Robot, 300 x 320 mm, 3 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 8898291A Loctite® 304 Benchtop Robot, 300 x 320 mm, 4 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 8898292A Loctite® 304 Benchtop Robot, 300 x 320 mm, 4 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 8898293A Loctite® 304 Benchtop Robot, 300 x 320 mm, 4 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 8898294A Loctite® 304 Benchtop Robot, 300 x 320 mm, 4 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 8898295A Loctite® 403 Benchtop Robot, 400 x 400 mm, 3 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 8998296A Loctite® 403 Benchtop Robot, 400 x 400 mm, 3 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 8998297A Loctite® 403 Benchtop Robot, 400 x 400 mm, 3 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 8998298A Loctite® 403 Benchtop Robot, 400 x 400 mm, 3 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 8998299A Loctite® 404 Benchtop Robot, 400 x 400 mm, 4 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 8998300A Loctite® 404 Benchtop Robot, 400 x 400 mm, 4 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 8998301A Loctite® 404 Benchtop Robot, 400 x 400 mm, 4 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 8998302A Loctite® 404 Benchtop Robot, 400 x 400 mm, 4 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 8998311 Loctite® 1 Liter Collapsible Bottle Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23,2498314 Loctite® 55 ml Clear Syringe Barrel Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8398315 Loctite® 55 ml Black Syringe Barrel Kit for UV Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8398316 Loctite® 30 ml Mounting Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598317A Loctite® ZETA® 7735 UV Wand System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 105, 11498318 Loctite® 300 ml Cartridge Mounting Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598319A Loctite® 300 ml Pneumatic Cartridge Dispensing Retainer . . . . . . . . . . . . . . . . . . . . . . . . .23, 2998320 Loctite® 10 ml Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598321 Loctite® 5 ml Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598322 Loctite® 3 ml Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598325 Loctite® 360° Rotation Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598326 Loctite® Mounting Bracket Kit for 98009 and 98013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598327 Loctite® Mounting Bracket Kit for 97113 and 97114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598328 Loctite® Mounting Rail, 3 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598329 Loctite® Mounting Rail, 8 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598330 Loctite® Mounting Rail, 12" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598332 Loctite® Tip Locator Bracket for 30 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598333 Loctite® Tip Locator Bracket for 300 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598334 Loctite® Tip Locator Bracket for 98009 Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598335 Loctite® Tip Locator for 97113 Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598336 Loctite® 4 Axis Robot Mounting Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598337 Loctite® SCARA Robot Mounting Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598339 Replacement 50W Lamp/Reflector Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 10598340 Loctite® 30 ml Syringe Holder for SCARA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598341 Loctite® 300 ml Syringe Holder for SCARA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598342 Loctite® Valve Holder for SCARA 98009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598343 Loctite® Valve Holder for SCARA 97113 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598344 Loctite® Ribbon Tip Adapter – 10 mm mix nozzles (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .8298345 Loctite® Soft Squeeze Bottle, 2 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23,2498346 Loctite® Soft Squeeze Bottle, 4 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23,2498347 Loctite® Soft Squeeze Bottle, 8 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23,2498348 Loctite® Dunce Cap, 2 oz. Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2498349 Loctite® Dunce Cap, 4 to 8 oz. Bottles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2498350 Loctite® Luer-Slip Cap, 2 oz. Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2498351 Loctite® Luer-Slip Cap, 4 to 8 oz. Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2498357 Loctite® Robot Z-Height Adjustment Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598359 Loctite® 2.25 Gallon Pressure Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 2198360 Loctite® Pressure Relief Valve Kit for 98359 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498361 Loctite® Pressure Regulator for 98359 Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498362 Loctite® Pressure Gauge for 98359 Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498363 Loctite® Lid Gasket for 98359 Reservoir – Buna N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498364 Loctite® Stepped Tip-Luer, 50 ml, 20 elements (2,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .8298365 Loctite® 50 ml Square Mix Nozzle, 16 elements (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .8298367 Loctite® 200 / 400 ml Mix Nozzle, Snap Tip, 9.3 mm (1,000 pack) . . . . . . . . . . . . . . . . . . . . . .8298371 Loctite® Cartridge Needle Luer-Lok® Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198373 Loctite® 200 / 400 ml Sq Mix Nozzle, Luer/Stepped Combo, 5.0 mm (10 pack) . . . . . . . . . . . .8298374 Loctite® 200 / 400 ml Sq Mix Nozzle, Luer/Stepped Combo, 5.0 mm (1,000 pack) . . . . . . . . . .8298375 Loctite® Lid Gasket for 98359 Reservoir – EP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8498377 Loctite® Posi-Link Controller . . . . . . . . . . . . . . . . . . . . . . . . . .9, 10, 30, 31, 87, 88, 89, 90, 9198378 Loctite® Posi-Link 5-25 Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9,1098379 Loctite® Posi-Link 10-50 Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9, 10, 30, 3198380 Loctite® Posi-Link 200-400 Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30, 31

121INDEXFor additional information and the full line of equipment, visit www.equipment.loctite.com.ITEMNUMBER PRODUCT NAME PAGE NUMBERITEMNUMBER PRODUCT NAME PAGE NUMBER98385 Loctite® 14 Gauge, White, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198386 Loctite® 14 Gauge, White, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198387 Loctite® 16 Gauge, Grey, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198388 Loctite® 16 Gauge, Grey, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198389 Loctite® 18 Gauge, Green, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198390 Loctite® 18 Gauge, Green, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198391 Loctite® 20 Gauge, Pink, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198392 Loctite® 20 Gauge, Pink, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198393 Loctite® 22 Gauge, Blue, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198394 Loctite® 22 Gauge, Blue, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198395 Loctite® Benchtop Interface Cable for Benchtop Robots . . . . . . . . . . . . . . . . . . .87, 88, 89, 90, 9198396 Loctite® 15 Gauge, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098397 Loctite® 15 Gauge, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098398 Loctite® 18 Gauge, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098399 Loctite® 18 Gauge, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .8098400 Loctite® 20 Gauge, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098401 Loctite® 20 Gauge, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098402 Loctite® 22 Gauge, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098403 Loctite® 22 Gauge, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098404 Loctite® 25 Gauge, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098405 Loctite® 25 Gauge, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .8098406 Loctite® Poppet Valve Mounting Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598407 Loctite® Tip Locator Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598408 Loctite® Poppet Valve Holder for SCARA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598409 Loctite® 200 / 400 ml Mix Nozzle, Stepped, 10 mm (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . .8298410 Loctite® 12 mm Ribbon Tip (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298411 Loctite® 25 mm Ribbon Tip (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298412 Loctite® 43 mm Ribbon Tip (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298413 Loctite® ZETA® 7411-S UV Flood System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 109, 11098414 Loctite® 50 ml Hand Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2498415 Loctite® Caulking Gun Converter Kit, 50 ml, 10:1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2698416 Loctite® 55 ml Syringe Starter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 8398420 Loctite® Optional Shutter for 98413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11098424 Loctite® 21 Gauge 1/2" Stainless Steel, Purple Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098425 Loctite® 21 Gauge 1/2" Stainless Steel, Purple Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .8098426 Loctite® Advancing Slide Dispense Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92, 9398427 Loctite® Single Rotary Dispense Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92, 9498428 Loctite® Dual Rotary Dispense Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92, 9498430 Loctite® 200 / 400 ml Mix Nozzle, 40 elements, Threaded Bell End (500 pack) . . . . . . . . . . . . .8298439 Loctite® Showcase Needle Variety Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198440 Loctite® LED 7700 On/Off Foot Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10098441 Loctite® Micro Needle Valve Mounting Bracket Kit for 98084 and 98520 . . . . . . . . . . . . . . . . .9598443 Loctite® Control Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10098444 Loctite® 50 ml Square Mix Nozzle, 16 elements (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298445 Loctite® Light Cure Acrylic Adhesive Dispensing system . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 1498446 Loctite® Roller Assembly, 1" wide band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198447 Loctite® Replacement Rollers, 1" wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198448 Loctite® Roller Assembly, 2" wide band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198449 Loctite® Replacement Rollers, 2" wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198450 Loctite® ZETA® 7760 UV Wand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 107, 11498451 Loctite® Lamp / Reflector Module, 200 W for ZETA® 7760 . . . . . . . . . . . . . . . . . . . . . . .103, 10798452 Loctite® UV Safety Glasses, Orange . . . . . . . . . . . . . . . . . .99, 100, 101, 102, 104, 108, 110, 11198453 Loctite® Dosimeter Adapter for Intensity Measurement . . . . . . . . . . . . . . . . . . . . . .100, 101, 11398454 Loctite® 50 ml Mix Nozzle, Luer Tip, 6.0 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298455 Loctite® 50 ml Mix Nozzle, Stepped, 6.0 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298456 Loctite® 200 / 400 ml Mix Nozzle, Stepped, 6 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .8298457 Loctite® 200 / 400 ml Mix Nozzle, Stepped, 8 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298458 Loctite® Luer-Lok® Adapter for 6.0 mm and 8 mm Mix Nozzles . . . . . . . . . . . . . . . . . . . . . . . .8298459 Loctite® 200 / 400 ml Mix Nozzle, Stepped, 10 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . .8298460 Loctite® 200 / 400 ml Mix Nozzle, Stepped, 8 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .8298461 Loctite® 200 / 400 ml Mix Nozzle, Stepped, 10 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . .8298462 Loctite® 50 ml Mix Nozzle, Stepped, 6.0 mm (4,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298463 Loctite® 50 ml Mix Nozzle, Stepped, 5.4 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298464 Loctite® 200 / 400 ml Mix Nozzle, Stepped, 8 mm (1,500 pack) . . . . . . . . . . . . . . . . . . . . . . . .8298466 Loctite® Caulking Gun Converter Kit for 50 ml Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2698467 Loctite® 200 / 400 ml Snap Tip Mix Nozzle (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298469 Loctite® 200 / 400 ml Snap Tip Mix Nozzle (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298470 Loctite® Snap Tip Mix Nozzle and Ribbon Tip Sample Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298472 Loctite® 50 ml Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2598473 Loctite® 50 ml Square Mix Nozzle, 5.3 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298474 Loctite® 200 / 400 ml Square Mix Nozzle, 7.5 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .8298476 Loctite® 12 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298477 Loctite® 25 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298478 Loctite® 43 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298479 Loctite® 3 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598480 Loctite® 3 ml Syringe Barrel and Piston, Natural (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .8598481 Loctite® 3 ml Syringe Barrel and Piston, Black (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598482 Loctite® 3 ml Syringe Barrel and Piston, Black (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .8598483 Loctite® 5 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598484 Loctite® 5 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598485 Loctite® 5 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598486 Loctite® 5 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598487 Loctite® 10 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .8598488 Loctite® 10 ml Syringe Barrel and Piston, Natural (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . .8598489 Loctite® 10 ml Syringe Barrel and Piston, Black (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598490 Loctite® 10 ml Syringe Barrel and Piston, Black (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .8598491 Loctite® 30 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .8598492 Loctite® 30 ml Syringe Barrel and Piston, Natural (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .8598493 Loctite® 30 ml Syringe Barrel and Piston, Black (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598494 Loctite® 30 ml Syringe Barrel and Piston, Black (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .8598495 Loctite® 55 ml Syringe Barrel and Piston, Natural (250 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .8598496 Loctite® 55 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .8598497 Loctite® 55 ml Syringe Barrel and Piston, Black (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598498 Loctite® 55 ml Syringe Barrel and Piston, Black (250 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .8598499 Loctite® Dispense Needle Tip Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198500 Loctite® Foldable 300 ml Cartridge Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 2998501 Loctite® Applicator Holder . . . . . . . . . . . . . . . . . . . . . . . . . . .6, 10, 11, 12, 59, 60, 61, 62, 83, 8498520 Loctite® Spray Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 69, 7498521 Loctite® Spray Valve Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 17, 69, 87, 88, 89, 90, 9198522 Loctite® LED Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10098543 Loctite® Light Guide, 5 mm x 1500 mm, Enhanced UVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10798544 Loctite® Hysol 050 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 4498545 Loctite® Hysol 050-HT Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 4498548 Loctite® Benchtop Peristaltic Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 6, 87, 88, 89, 90, 9198549 Loctite® Robot Interface Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87, 88, 89, 90, 9198557 Loctite® 3 ml Syringe Barrel, Natural (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598559 Loctite® 5 ml Syringe Barrel, Natural (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598561 Loctite® 10 ml Syringe Barrel, Natural (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598563 Loctite® 30 ml Syringe Barrel, Natural (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598565 Loctite® 55 ml Syringe Barrel, Natural (250 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598576 Loctite® 5 ml Syringe Barrel, Black (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598578 Loctite® 10 ml Syringe Barrel, Black (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598581 Loctite® 55 ml Syringe Barrel, Black (250 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598584 Loctite® 5 ml Syringe Piston (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598587 Loctite® 30 / 55 ml Syringe Piston (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598588 Loctite® ZETA® 7610 UV Benchtop Conveyer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 11698591 Loctite® 7700 Hand Held LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 100, 10198593 Loctite® Light Guide, 3 mm x 1000 mm, 3 POLE, Enhanced UVC . . . . . . . . . . . . . . . . . . . . . . .10798594 Loctite® Light Guide, 3 mm x 1000 mm, 4 POLE, Enhanced UVC . . . . . . . . . . . . . . . . . . . . . . .10798595 Loctite® 7703 LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 100, 10198596 Loctite® Light Guide, 3 mm x 1000 mm, 3 POLE, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10798597 Loctite® Light Guide, 3 mm x 1000 mm, 4 POLE, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10798598 Loctite® IR Filter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 10798601 Loctite® 7700-HD LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 10198602 Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 3 axis, 110V . . . . . . . . . . . . . . . . . . . . .86, 9098603 Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 3 axis, 110V CE Rated . . . . . . . . . . . . .86, 9098604 Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 3 axis, 220V . . . . . . . . . . . . . . . . . . . . .86, 9098605 Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 3 axis, 220V CE Rated . . . . . . . . . . . . .86, 9098606 Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 4 axis, 110V . . . . . . . . . . . . . . . . . . . . .86, 9098607 Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 4 axis, 110V CE Rated . . . . . . . . . . . . .86, 9098608 Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 4 axis, 220V . . . . . . . . . . . . . . . . . . . . .86, 9098609 Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 4 axis, 220V CE Rated . . . . . . . . . . . . .86, 9098610 Loctite® 3/4" wide x 1/4" NPT Dispense Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198611 Loctite® Needle, 23 gauge, Helix, 1/2" Stainless Steel (50 pack) . . . . . . . . . . . . . . . . . . . . . . . .8098612 Loctite® Needle, 23 gauge, Helix, 1/2" Stainless Steel (1,000 pack) . . . . . . . . . . . . . . . . . . . . .8098613 Loctite® Precision O-Ring Cut and Splice Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9798622 Loctite® 50 ml Mix Nozzle, 20 elements, Luer (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298623 Loctite® 50 ml Mix Nozzle, 20 elements, Step (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298624 Loctite® Needle, 25 gauge, 1/4" Stainless Steel, Red (50 pack) . . . . . . . . . . . . . . . . . . . . . . . .8098625 Loctite® Needle, 25 gauge, 1/4" Stainless Steel, Red (1,000 pack) . . . . . . . . . . . . . . . . . . . . . .8098626 Loctite® Needle, 27 gauge, 1/4" Stainless Steel, Clear (50 pack) . . . . . . . . . . . . . . . . . . . . . . .8098627 Loctite® Needle, 27 gauge, 1/4" Stainless Steel, Clear (1,000 pack) . . . . . . . . . . . . . . . . . . . . .8098628 Loctite® Needle, 30 gauge, 1/4" Stainless Steel, Lavender (50 pack) . . . . . . . . . . . . . . . . . . . .8098629 Loctite® Needle, 30 gauge, 1/4" Stainless Steel, Lavender (1,000 pack) . . . . . . . . . . . . . . . . . .8098632 Loctite® 50 ml Square Mix Nozzle, 24 elements, 5.3 mm2 (1,000 pack) . . . . . . . . . . . . . . . . . .8298633 Loctite® ZETA® 7720 Visible Light Wand System . . . . . . . . . . . . . . . . . . . . . . .98, 103, 104, 11498634 Loctite® 6 mm D x 1000 mm Fiber Optic Light Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10498635 Loctite® Replacement Lamp Reflector Module, 100 W for Loctite® Indigo 7720 . . . . .103, 10498636 Loctite® SCARA Interface Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9198637 Loctite® Formable Dispense Tip, 21 Gauge, White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198639 Loctite® Posi-Link 10-50 Syringe Nest, 10 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1098640 Loctite® Posi-Link 10-50 Syringe Nest, 25 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1098641 Loctite® Posi-Link 10-50 50ml Dual Cartridge Nest, 1:1 and 2:1 . . . . . . . . . . . . . . . . . . . . . .3198642 Loctite® Posi-Link 10-50 50ml Dual Cartridge Nest, 10:1 . . . . . . . . . . . . . . . . . . . . . . . . . . .3198643 Loctite® Posi-Link 5-25 Syringe Nest, 5 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1098644 Loctite® Posi-Link 5-25 Syringe Nest, 10 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1098645 Loctite® Posi-Link 5-25 Syringe Nest, 25 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1098646 Loctite® Universal Syringe Bracket for Loctite® Posi-Link . . . . . . . . . . . . . . . . . . . . . . . . . . .9598647 Loctite® 50 ml Dual Cartridge Bracket for Loctite® Posi-Link . . . . . . . . . . . . . . . . . . . . . . .9598648 Loctite® PC Interface Cable for Loctite® Benchtop Robots . . . . . . . . . . . . . . . .87, 88, 89, 90, 9198649 Replacement Bulb, 6" UV for Loctite® ZETA® 7610 Conveyor . . . . . . . . . . . . . . . . . . . . . . . .11698652 Loctite® Light Blocking Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8198653 Loctite® 200 / 400 ml Square Mix Nozzle, 7.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8298655 Loctite® 3 ml Syringe Barrel, Black (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8598656 Loctite® 3 ml Syringe Air Line Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 8398657 Loctite® 5 ml Syringe Air Line Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 8398658 Loctite® Dispense Tip, 25 gauge, Taper Tip, Helix Thread (50 pack) . . . . . . . . . . . . . . . . . . . . . .8198659 Loctite® Dispense Tip, 25 gauge, Taper Tip, Helix Thread (1,000 pack) . . . . . . . . . . . . . . . . . . .8198660 Loctite® Dispense Tip, 27 gauge, Taper Tip, Helix Thread (50 pack) . . . . . . . . . . . . . . . . . . . . . .8198661 Loctite® Dispense Tip, 27 gauge, Taper Tip, Helix Thread (1,000 pack) . . . . . . . . . . . . . . . . . . .8198662 Loctite® Posi-Link 200-400 200 ml Dual Cartridge Nest, 1:1 and 2:1 . . . . . . . . . . . . . . . . . .3198663 Loctite® Posi-Link 200-400 400 ml Dual Cartridge Nest, 1:1 and 2:1 . . . . . . . . . . . . . . . . . .3198664 Loctite® Posi-Link 200-400 400 ml Dual Cartridge Nest, 10:1 . . . . . . . . . . . . . . . . . . . . . . .3198667 Loctite® 200 / 400 ml Square Mix Nozzle, 24 elements, Threaded Bell End . . . . . . . . . . . . . . .8298668 Loctite® 200 / 400 ml Square Mix Nozzle, 24 elements, Threaded Bell End . . . . . . . . . . . . . . .8298669 Loctite® LED Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9598671 Loctite® Solenoid for 97141 – Loctite® Pinch Tube Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3198672 Loctite® 200 / 400 ml Mix Nozzle, 40 elements, Threaded Bell End (10 pack) . . . . . . . . . . . . . .8298687 Loctite® Adapter Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49200022 Loctite® Empty 1 lb. HDPE Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 20,22

122INDEXFor additional information and the full line of equipment, visit www.equipment.loctite.com.ITEMNUMBER PRODUCT NAME PAGE NUMBERITEMNUMBER PRODUCT NAME PAGE NUMBER419115 Loctite® Standard Adapter/Check Valve for Nozzles (Single pack) . . . . . . . . . . . . . . . . . . . . . . .49583804 Loctite® 50 ml Mix Nozzle, Stepped, 5.4 mm (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .82805741 Loctite® UVALOC 1000 UV Cure Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 108830703 Loctite® 14 Gauge, 1/4", Stainless Steel, Olive, Helical Thread (50 pack) . . . . . . . . . . . . . . . . .80830740 Loctite® 14 Gauge, 1/4", Stainless Steel, Olive, Helical Thread (1,000 pack) . . . . . . . . . . . . . . .80869401 Loctite® Feed Line Tubing, Clear, 2.0 mm OD x 1.4 mm ID, 20 Meters . . . . . . . . . . . . . . . . . . .85869402 Loctite® Feed Line Tubing, Clear, 1.6 mm OD x 1.0 mm ID, 20 Meters . . . . . . . . . . . . . . . . . . .85870096 Loctite® UV Bulb, Gallium, UVALOC 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108870097 Loctite® UV Bulb, Iron, UVALOC 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108870098 Loctite® UV Bulb, Mercury, UVALOC 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108883976 Loctite® Digital Syringe Dispensing System . . . . . . . . . . . . . . . . . . . .5, 12, 84, 87, 88, 89, 90, 91883979 Loctite® 7703-HD LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 101891494 Loctite® Light Intensity Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 105, 106, 107902521 Loctite® Replacement Foot Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84909393 Loctite® O-Ring Replacement Cord Stock, 0.250" diameter . . . . . . . . . . . . . . . . . . . . . . . . . . .97909394 Loctite® O-Ring Replacement Cord Stock, 0.125" diameter . . . . . . . . . . . . . . . . . . . . . . . . . . .97909395 Loctite® O-Ring Replacement Cord Stock, 0.093" diameter . . . . . . . . . . . . . . . . . . . . . . . . . . .97909396 Loctite® O-Ring Replacement Cord Stock, 0.187" diameter . . . . . . . . . . . . . . . . . . . . . . . . . . .97910276 Loctite® Black Tubing 1.6 mm OD x 1.0 mm ID x 20 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85916050 Loctite® Hysol 050A, 0.090 Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49916268 Loctite® Hysol 050 Gas Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44916281 Loctite® Hysol 050-Lite Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 45916282 Loctite® Hysol 050A Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44918088 Loctite® 200 / 400 ml Mix Nozzle, 32 Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82929541 Loctite® Z Plate Robot Adapter; Posi-Link 200 / 400 Dual Cartridge . . . . . . . . . . . . . . . . . . .95936680 Feed line tubing 2.0 mm OD x 1.4 mm ID, black, 1 x 65.6' . . . . . . . . . . . . . . . . . . . . . . . . . . . .85936701 Loctite® Clear Tubing, 3.0 mm OD x 1.9 mm ID x 20 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85936702 Loctite® Clear Tubing, 3.0 mm OD x 2.4 mm ID x 20 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85937394 Loctite® Feed Line Tubing, 3.0 mm OD x 2.4 ID, Black, 20 Meters . . . . . . . . . . . . . . . . . . . . . . .85941765 Loctite® Feed Line Tubing, 2.5 mm OD x 1.9 ID, Black, 20 Meters . . . . . . . . . . . . . . . . . . . . . . .85951639 Loctite® Dual Light Guide Balancing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107951681 Loctite® Single Light Guide, 1.5 m Long x 5 mm Diameter . . . . . . . . . . . . . . . . . . .105, 106, 107958216 Loctite® ZETA® 7735 UV Wand – IM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 105958228 Loctite® ZETA® 7740 UV Wand – IM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 106958239 Loctite® ZETA® 7760 UV Wand – IM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 107960356 Loctite® LED Cure Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100, 101967055 Loctite® LED Tip Covers (5 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100, 101970655 Loctite® Static Mixer-Luer Adapter (2,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82971023 Loctite® Replacement Ballast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111971024 Loctite® Replacement Filter Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109, 111971028 Loctite® 7418 Replacement Bulb – MH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109, 111971031 Loctite® Indigo 7418 Flood Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 109, 111976418 Loctite® CureJet Indigo LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 102976419 Loctite® LED Controller for 976418 – CureJet Indigo LED . . . . . . . . . . . . . . . . . . . . .98, 102976420 Loctite® CureJet 405 LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 102980160 Loctite® High Intensity UV Source, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 118980161 Replacement 5" UV Bulb – 300 W/in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118981821 Loctite® 1/4", Clear, Polyethylene Feed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85981866 Loctite® 3/8", Clear, Polyethylene Feed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85981880 Loctite® Replacement Reservoir Lid O-Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85981994 Loctite® 1/4", Clear, Nylon Feed Tube for Pump-A-Bead . . . . . . . . . . . . . . . . . . . . . . . . . . . .85982440 Loctite® High Intensity UV Source, 220 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 118982450 Loctite® 200 g Gel Tube Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85982520 Loctite® Universal Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84, 85982621 Loctite® Stainless Steel Poppet Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 70, 74, 77982644 Loctite® Fishbach Cartridge Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81982716 Loctite® AC Level Sensor Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22, 85982719 Loctite® Bond-A-Matic® 3000 Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 7, 62982720 Loctite® Bond-A-Matic® 3000 Reservoir,0 to 15 psi with Low Level Sensor . . . . . . . . . . .15, 16, 17, 20, 59, 61, 65, 66, 67, 68, 69, 71, 79982721 Loctite® Bond-A-Matic® 3000 Reservoir,0 to 15 psi with Low Level Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 20, 59, 61, 66, 68982722 Loctite® Bond-A-Matic® 3000 Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 7, 62982723 Loctite® Bond-A-Matic® 3000 Reservoir, 0 to 100 psiwith Low Level Sensor . . . . . . . . . . . . . . . . . . . .15, 16, 17, 20, 59, 61, 65, 66, 67, 68, 69, 71, 79982724 Loctite® Bond-A-Matic® 3000 Reservoir,0 to 100 psi with Low Level Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 20, 59, 61, 66, 68982726 Loctite® Bond-A-Matic® 3000 Reservoir,0 to 15 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 17, 20, 59, 60, 61, 65, 66, 67, 68, 69, 71, 79982727 Loctite® Bond-A-Matic® 3000 Reservoir,0 to 100 psi . . . . . . . . . . . . . . . . . . . . . . . . .15, 17, 20, 59, 60, 61, 65, 66, 67, 68, 69, 71, 72, 79982732 Loctite® Replacement 24 VDC Sensor for 982720 and 982723 Only . . . . . . . . . . . . . . . . . .22, 85982880 Loctite® 4 Liter Gravity Feed Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 22, 72982881 Loctite® Replacement Reservoir Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85983050 Loctite® Visible Lamp for 98027, 98413 or 98039 – 400 W/in. . . . . . . . . . . . . . . . . . . . .109, 110983055 Loctite® Reservoir Lid O-Ring for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84983095 Loctite® Tube Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85983116 Loctite® Replacement Actuator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85983117 Loctite® Replacement Pump Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85983255 Loctite® Replacement Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85983330 Loctite® Positive Displacement Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 64, 72, 74983436 Loctite® 200 ml Dual Cartridge Manual Applicator, 1:1 and 2:1 . . . . . . . . . . . . . . . . . . . . . .23, 27983437 Loctite® 200 ml Dual Cartridge Pneumatic Applicator, 1:1 and 2:1 . . . . . . . . . . . . . . . . . . .23, 27983438 Loctite® 400 ml Dual Cartridge Manual Applicator, 1:1 and 2:1 . . . . . . . . . . . . . . . . . . . . . .23, 27983439 Loctite® 400 ml Dual Cartridge Pneumatic Applicator, 1:1 and 2:1 . . . . . . . . . . . . . . . . . . .23, 27983462 Loctite® Exhaust Plenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115983464 Loctite® Sight Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115983465 Loctite® Sight Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115983466 Loctite® Air Deflection Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115983469 Fusion D Bulb – 300 W/in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115, 117983470 Fusion H Bulb – 300 W/in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115, 117983471 Fusion V Bulb – 300 W/in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115, 117983509 Loctite® 50 ml Mix Nozzle, 20 elements, Luer (2,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .82983533 Loctite® 50 ml Replacement Applicator Plunger, 1:1 ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25983534 Loctite® 50 ml Replacement Applicator Plunger, 2:1 ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25983677 Loctite® Single Light Guide, 1 m Long x 5 mm Diameter . . . . . . . . . . . . . . . . . . . . .105, 106, 107983684 Loctite® Dual Light Guide, 1 m Long x 3 mm Diameter . . . . . . . . . . . . . . . . . . . . . .105, 106, 107983914 Loctite® Poppet Valve (0 to 625 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 70, 74, 77984070 Loctite® Cotton Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111984209 Loctite® Optional 50 ml Applicator Plunger, 4:1 Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25984210 Loctite® 4:1 Conversion Kit for 983439 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27984211 Loctite® 4:1 Conversion Kit for 983438 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27984261 Loctite® Standard Adapter for 300 ml Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49984262 Loctite® Standard 1-Hole Nozzle with Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49984263 Loctite® Adapter/Check Valve for Specialty Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49984264 Loctite® Needle Jet Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49984265 Loctite® Diagonal Extension Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49984266 Loctite® Flat Spreader Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49984267 Loctite® 2-Hole Spreader Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49984268 Loctite® 3-Hole Spreader Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49984272 Loctite® Injection Needle Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49984280 Loctite® Pneumatic Foot Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84984281 Loctite® Vertical Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84984347 Loctite® Applicator Hanger Arm for Bulk-14 and Bulk-34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57984363 Loctite® Applicator Hanger Arm for Bulk-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57984480 Loctite® Reservoir Liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 20984594 Loctite® High Viscosity Dispense Valve – Machine Mount (0 to 4,000 psi) . . . . . . . . . . . . . . . . .77984621 Loctite® Replacement Foot Switch for 98521 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 69984625 Loctite® Vertical Syringe Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 83984650 Loctite® Syringe Air Line Filter for Syringe Dispensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83984684 Loctite® Valve Rebuild Kit for 98009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84984685 Loctite® Valve Rebuild Kit for 98013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84984687 Loctite® Anti-Bubbler Kit for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84984688 Loctite® Silicone Tubing for Dispense Valve Purging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85984691 Loctite® Advancing Slide, 2" Stroke . . . . . . . . . . . . . . . . . . . . . . . . .15, 17, 65, 66, 67, 70, 71, 84984818 Loctite® Replacement 100W Lamp Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 106984826 Loctite® Replacement Sleeve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84984832 Loctite® Fitting, 1/4" NPT x 1/4" Tube, Black, Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81, 84984833 Loctite® Fitting, 1/4" NPT x 3/8" Tube, Black, Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81, 84984999 Loctite® Standard 1-Hole Nozzle, 10" Diameter x 16" L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985001 Loctite® Spreader Nozzle (0.08" x 25" sq.) x 47" L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985002 Loctite® Pencil Point Nozzle, 0.08" Diameter x 24" L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985003 Loctite® Precision Nozzle, 0.05" Diameter x 20" L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985004 Loctite® Extension Nozzle, 0.10" Diameter x 50" L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985005 Loctite® Silicone Rubber Safety Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985022 Loctite® Optional Head Extension Cable for 98413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110985087 Loctite® Heavy Duty Metal Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985110 Loctite® 2-Hole Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985111 Loctite® 3-Hole Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985112 Loctite® Diagonal Extension Nozzle, 0.10" Diameter x 1.32" Long . . . . . . . . . . . . . . . . . . . . . .49985113 Loctite® Needle Extension Nozzle, 0.05 Diameter x 1.32 Long . . . . . . . . . . . . . . . . . . . . . . . . .49985114 Loctite® Spreader Extension Nozzle, (0.09 x 25" sq.) x 1.22 Long . . . . . . . . . . . . . . . . . . . . . . .49985115 Loctite® L-Nozzle (Ideal for Overlap Carton Sealing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985116 Loctite® T-Nozzle (Ideal for Center Flap Carton Sealing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985122 Loctite® Standard Medium Spray Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985211 Loctite® Narrow Spray Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985216 Loctite® Ultra Wide Spray Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985225 Loctite® Replacement Standard Nozzle, 0.08" Diameter Cone Tip . . . . . . . . . . . . . . . . . . . . . . .49985243 Loctite® Tool Hanger/Balancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49985245 Loctite® Universal Metal Dispenser for 200 / 400 ml Cartridges . . . . . . . . . . . . . . . . . . . . .23, 28985246 Loctite® 400 ml Dual Cartridge Manual Dispenser, 10:1 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 27985249 Loctite® 400 ml Dual Cartridge Pneumatic Applicator, 10:1 . . . . . . . . . . . . . . . . . . . . . . . . .23, 27985281 Loctite® Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66, 84985298 Loctite® Replacement Silicone Work Surface for 98039 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109985397 Loctite® Air Line Filter/Regulator with Pressure Gauge (0 to 150 psi) . . . . . . . . . . . . . . .46, 49, 77985676 Loctite® 1.5 mm ID Tapered Aluminum Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . . . . .77985934 Loctite® Replacement Ballast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112985940 Visible Arc Bulb, 1500 W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109, 112985942 Loctite® Replacement Filter Glass, Tempered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109, 112986000 Loctite® Pump-A-Bead II Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 13, 70986025 Loctite® Nozzle, 0.025" Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85986035 Loctite® Nozzle, 0.035" Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85986060 Loctite® Nozzle, 0.060" Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85986086 Loctite® Optional 50 ml Applicator Plunger, 10:1 Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25986091 Loctite® 4 Conductor Cable with M-12 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78986264 Loctite® 4-Way Solenoid for 98079 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84986300 Loctite® Poppet Valve – 1/4" Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 70, 74, 77, 85986301 Loctite® Valve Rebuild Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85986325 Loctite® Air Operated Mounted Applicator, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55986326 Loctite® 4-Way Solenoid Valve Kit, 24 VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55986331 Loctite® Valve Mount Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986337 Loctite® Extrusion Hose, 4', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986338 Loctite® Extrusion Hose, 4', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986339 Loctite® Extrusion Hose, 6', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986340 Loctite® Extrusion Hose, 6', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986341 Loctite® Extrusion Hose, 8', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986342 Loctite® Extrusion Hose, 8', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986343 Loctite® Extrusion Hose, 10', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

123INDEXFor additional information and the full line of equipment, visit www.equipment.loctite.com.ITEMNUMBER PRODUCT NAME PAGE NUMBERITEMNUMBER PRODUCT NAME PAGE NUMBER986344 Loctite® Extrusion Hose, 10', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986345 Loctite® Extrusion Hose, 12', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986346 Loctite® Extrusion Hose, 12', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986347 Loctite® Extrusion Hose, 16', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986348 Loctite® Extrusion Hose, 16', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986349 Loctite® Extrusion Hose, 18', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986350 Loctite® Extrusion Hose, 18', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986351 Loctite® Extrusion Hose, 24', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986352 Loctite® Extrusion Hose, 24', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986353 Loctite® Spray Hose, 4', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986354 Loctite® Spray Hose, 4', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986355 Loctite® Spray Hose, 6', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986356 Loctite® Spray Hose, 6', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986357 Loctite® Spray Hose, 8', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986358 Loctite® Spray Hose, 8', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986359 Loctite® Spray Hose, 10', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986360 Loctite® Spray Hose, 10', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986361 Loctite® Spray Hose, 12', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986362 Loctite® Spray Hose, 12', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986363 Loctite® Spray Hose, 16', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986364 Loctite® Spray Hose, 16', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986365 Loctite® Spray Hose, 18', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986366 Loctite® Spray Hose, 18', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986367 Loctite® Spray Hose, 24', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986368 Loctite® Spray Hose, 24', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986369 Loctite® Bead Nozzle 1/2" x 0.020" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986370 Loctite® Bead Nozzle 1" x 0.020" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986371 Loctite® Bead Nozzle 2" x 0.020" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986372 Loctite® Bead Nozzle 3" x 0.020" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986373 Loctite® Bead Nozzle 1/2" x 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986374 Loctite® Bead Nozzle 1" x 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986375 Loctite® Bead Nozzle 2" x 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986376 Loctite® Bead Nozzle 3" x 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986377 Loctite® Bead Nozzle 1/2" x 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986378 Loctite® Bead Nozzle 1" x 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986379 Loctite® Bead Nozzle 2" x 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986380 Loctite® Bead Nozzle 3" x 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986381 Loctite® Bead Nozzle 1/2" x 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986382 Loctite® Bead Nozzle 1" x 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986383 Loctite® Bead Nozzle 2" x 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986384 Loctite® Bead Nozzle 3" x 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986385 Loctite® Bead Nozzle 1/2" x 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986386 Loctite® Bead Nozzle 1" x 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986387 Loctite® Bead Nozzle 2" x 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986388 Loctite® Bead Nozzle 3" x 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986389 Loctite® Bead Nozzle 1/2" x 0.070" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986390 Loctite® Bead Nozzle 1" x 0.070" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986391 Loctite® Bead Nozzle 2" x 0.070" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986392 Loctite® Bead Nozzle 3" x 0.070" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986393 Loctite® Bead Nozzle 1/2" x 0.080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986394 Loctite® Bead Nozzle 1" x 0. 080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986395 Loctite® Bead Nozzle 2" x 0.080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986396 Loctite® Bead Nozzle 3" x 0.080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986397 Loctite® Bead Nozzle 1/2" x 0.090" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986398 Loctite® Bead Nozzle 1" x 0.090" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986399 Loctite® Bead Nozzle 2" x 0.090" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986400 Loctite® Bead Nozzle 3" x 0.090" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986634 Loctite® Bulk-14 Hopper Upgrade, 40 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986635 Loctite® Bulk-34 Hopper Upgrade, 78 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986636 Loctite® Floor Stand Kit For Bulk Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986637 Loctite® Hose Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986638 Loctite® Tension Balancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986639 Loctite® Cradle and Tension Balancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986693 Loctite® Feed Line Adapter, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986694 Loctite® Feed Line Adapter, 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986695 Loctite® Button Nozzle, 0.012" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986696 Loctite® Button Nozzle, 0.015" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986697 Loctite® Button Nozzle, 0.025" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986698 Loctite® Button Nozzle, 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986699 Loctite® Button Nozzle, 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986700 Loctite® Button Nozzle, 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986701 Loctite® Button Nozzle, 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986702 Loctite® Button Nozzle, 0.070" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986703 Loctite® Button Nozzle, 0.080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986704 Loctite® Button Nozzle, 0.090" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986723 Loctite® Proximity Sensor Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986724 Loctite® Optical Sensor Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986725 Loctite® Sensor Cord Extension, 10 Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986727 Loctite® Direction Nozzle O-Ring (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986730 Loctite® Direction Nozzle Screw (5 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986733 Loctite® Blank Screw Assembly (5 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986736 Loctite® Direction Nozzle Assembly, 0.010" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . .57986738 Loctite® Direction Nozzle Assembly, 0.020" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . .57986740 Loctite® Direction Nozzle Assembly, 0.030" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . .57986742 Loctite® Direction Nozzle Assembly, 0.040" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . .57986743 Loctite® Timer Cord, 24 VDC Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986744 Loctite® Timer Cord, Single Line Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986745 Loctite® Timer Cord, 2 Line Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986746 Loctite® Timer Cord – Bulk 34 Line Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986747 Loctite® Timer Cord – Bulk 34, 24 VDC Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986783 Loctite® Direction Nozzle, 0.010" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986784 Loctite® Direction Nozzle, 0.020" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986785 Loctite® Direction Nozzle, 0.030" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986786 Loctite® Direction Nozzle, 0.040" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986791 Loctite® T-Bar Nozzle, 2" x 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986792 Loctite® T-Bar Nozzle, 2" x 2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986793 Loctite® T-Bar Nozzle, 2" x 3" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986797 Loctite® Y-Bar Nozzle, 2" x 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986798 Loctite® Y-Bar Nozzle, 2" x 2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986799 Loctite® Y-Bar Nozzle, 2" x 3" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986803 Loctite® Swirl Nozzle, 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986804 Loctite® Swirl Nozzle, 0.045" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986805 Loctite® Swirl Nozzle, 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986806 Loctite® Swirl Nozzle, 0.080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986807 Loctite® Spray Nozzle and O-Ring, 0.020" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986808 Loctite® Spray Nozzle and O-Ring, 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986809 Loctite® Spray Nozzle and O-Ring, 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986810 Loctite® Spray Nozzle and O-Ring, 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986884 Loctite® 2 Hand Applicator Cord, 1 Switch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55986885 Loctite® 2 Hand Applicator Cord, 2 Switch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55986886 Loctite® Hysol 2 Hand Extrusion Controller, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986887 Loctite® Hysol 2 Hand Spray Controller, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986888 Loctite® Swirl Nozzle Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986889 Loctite® Spray Nozzle Assembly – Fan Air Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57986890 Loctite® Timer Cord, Single Line, 24 VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986891 Loctite® External Interface Cable for Bulk-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56986892 Loctite® External Interface Cable for Bulk-34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56987017 Loctite® Spray Nozzle Assembly – Cone Air Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57987200 Pre-Filter for Benchtop Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96987201 Carbon Bed Filter for Benchtop Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96987364 HEPA / Carbon Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96987365 Exhaust Arm Damper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96987366 Exhaust Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96987367 Exhaust Arm Nozzle – 40 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96987512 Loctite® Operation Box for SCARA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91987525 Loctite® Hysol 2 Hand Extrusion Controller, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56987526 Loctite® Hysol 2 Hand Spray Controller, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56987835 Loctite® External Interface Cable for Bulk-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56988000 Loctite® Solenoid Valve Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87, 88, 89, 90, 91988107 Loctite® Nozzle Adapter/Check Valve for Loctite® Hysol 050 Hot Melt Applicator . . . . . . . . .49988108 Loctite® 1-Hole Nozzle, 0.08" Diameter,for Loctite® Hysol 050 Hot Melt Applicator (5 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49988159 Loctite® Replacement Filter Glass for 98413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110988173 Loctite® Replacement Light Blocking Curtain for 98413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110988506 Hand Pump Washers (3 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24988510 Loctite® Low Viscosity Fluid Pump System, 1:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . . . .75988514 Loctite® Low Viscosity Fluid Pump System, 3:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . . . .75988516 Loctite® Low Viscosity Fluid Pump System, 3:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . . . .75988517 Loctite® Low Viscosity Fluid Pump System, 3:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . . . .75988519 Loctite® Low Viscosity Fluid Pump System, 3:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . . . .75988520 Loctite® Low Viscosity Fluid Pump System, 14:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . . .75988522 Loctite® Low Viscosity Fluid Pump System, 14:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . . .75988523 Loctite® Low Viscosity Fluid Pump System, 14:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . . .75988525 Loctite® Low Viscosity Fluid Pump System, 14:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . . .75988526 Loctite® 4 1/4" Air Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988528 Loctite® 6" Air Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988530 Loctite® CS Pump Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988532 Loctite® Inert Pump Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988533 Loctite® CS Pump Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988535 Loctite® Inert Pump Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988536 Loctite® CS, 55 Gallon Twin Post Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988539 Loctite® CS, 5 Gallon Single Post Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988541 Loctite® Inert, 55 Gallon Twin Post Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988542 Loctite® Inert, 5 Gallon Single Post Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988543 Loctite® Pump Hoist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988545 Loctite® Pump Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988547 Loctite® 55 Gallon Drum Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988548 Loctite® 5 Gallon Pail Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988551 Loctite® Low Level Cut-off – 55 Gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988552 Loctite® Microswitch (Low Level) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988554 Loctite® Wall Mount Kit for Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988715 Loctite® High Viscosity Paste Pump System, 22:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76988716 Loctite® High Viscosity Paste Pump System, 22:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . .76988717 Loctite® High Viscosity Paste Pump System, 22:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . .76988718 Loctite® High Viscosity Paste Pump System, 22:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . .76988719 Loctite® High Viscosity Paste Pump System, 44:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76988720 Loctite® High Viscosity Paste Pump System, 44:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76988721 Loctite® High Viscosity Paste Pump System, 44:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76988722 Loctite® High Viscosity Paste Pump System, 44:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76988723 Loctite® High Viscosity Paste Pump System, 64:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76988724 Loctite® High Viscosity Paste Pump System, 64:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76988725 Loctite® High Viscosity Paste Pump System, 64:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76988726 Loctite® High Viscosity Paste Pump System, 64:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76988837 Loctite® CS Pump Tube with Inert Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988840 Loctite® CS Pump Tube with Inert Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77988843 Loctite® High Viscosity Paste Pump System, 22:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76988844 Loctite® High Viscosity Paste Pump System, 44:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76988845 Loctite® High Viscosity Paste Pump System, 64:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76

124INDEXFor additional information and the full line of equipment, visit www.equipment.loctite.com.ITEMNUMBER PRODUCT NAME PAGE NUMBERITEMNUMBER PRODUCT NAME PAGE NUMBER988846 Loctite® High Viscosity Paste Pump System, 22:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76988847 Loctite® High Viscosity Paste Pump System, 44:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76988848 Loctite® High Viscosity Paste Pump System, 64:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76988896 Loctite® Syringe Finger Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11,12988900 Loctite® Meter Mix 1000L Dispense System – Fixed Ratio . . . . . . . . . . . . . . . . . . . . . . . . .32, 35988901 Loctite® Meter Mix 1000L Dispense System – Variable Ratio . . . . . . . . . . . . . . . . . . . . . . .32, 35988902 Loctite® Meter Mix 1000H Dispense System – Fixed Ratio . . . . . . . . . . . . . . . . . . . . . . . . .32, 35988903 Loctite® Meter Mix 1000H Dispense System – Variable Ratio . . . . . . . . . . . . . . . . . . . . . . .32, 35988906 Loctite® Meter Mix 2000 Dispense System – Fixed Ratio . . . . . . . . . . . . . . . . . . . . . . . . . .32, 36988907 Loctite® Meter Mix 2000 Dispense System – Variable Ratio . . . . . . . . . . . . . . . . . . . . . . . .32, 36988908 Loctite® Meter Mix 3000 Dispense System – Fixed Ratio . . . . . . . . . . . . . . . . . . . . . . . . . .32, 37988909 Loctite® Meter Mix 3000 Dispense System – Variable Ratio . . . . . . . . . . . . . . . . . . . . . . . .32, 37988912 Loctite® Abrasion Resistant Pumps Instead of Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988913 Loctite® 304 Stainless Steel Pumps Instead of Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988924 Loctite® 8 mm High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988925 Loctite® 8 mm High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988926 Loctite® 8 mm High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988927 Loctite® 8 mm High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988928 Loctite® 8 mm High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988931 Loctite® 10 mm High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988932 Loctite® 10 mm High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988933 Loctite® 10 mm High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988934 Loctite® 10 mm High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988935 Loctite® 10 mm High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988938 Loctite® 15 mm High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988939 Loctite® 15 mm High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988940 Loctite® 15 mm High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988941 Loctite® 15 mm High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988942 Loctite® 15 mm High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988945 Loctite® 20 mm High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988946 Loctite® 20 mm High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988947 Loctite® 20 mm High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988948 Loctite® 20 mm High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988949 Loctite® 20 mm High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988952 Loctite® 25 mm High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988953 Loctite® 25 mm High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988954 Loctite® 25 mm High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988955 Loctite® 25 mm High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988956 Loctite® 25 mm High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988973 Loctite® Custom Diameter High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988974 Loctite® Custom Diameter High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988975 Loctite® Custom Diameter High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988976 Loctite® Custom Diameter High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988977 Loctite® Custom Diameter High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988978 Loctite® Custom Diameter High, 30 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988979 Loctite® Custom Diameter High, 35 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988980 Loctite® 8 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . .40988981 Loctite® 10 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988982 Loctite® 15 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988983 Loctite® 20 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988984 Loctite® 25 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988985 Loctite® 30 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988986 Loctite® 35 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40988988 Loctite® 5 L Stainless Steel Tank with Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39988989 Loctite® 7.5 L Stainless Steel Tank with Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39988991 Loctite® 7.5 L Tank High-Low and Vac. Ready – Mild Steel (MMD 3000) . . . . . . . . . . . . . . . . . .39988993 Loctite® 7.5 L Tank High-Low and Vac. Ready – Stainless Steel (MMD 3000) . . . . . . . . . . . . . .39988994 Loctite® Recirculation for 5 or 7.5 L Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39988995 Loctite® 6.9 CFM Vacuum Pump Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988996 Loctite® Remote Operator Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988997 Loctite® Pressure-Vacuum Tank – Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988998 Loctite® Electric Agitator – 1 (5 gallon) Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40988999 Loctite® Tank Support Stand – Holds 2 Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989000 Loctite® Disposable Desiccant Dryer – 5 Gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989001 Loctite® Nitrogen Harness Assembly – 1 Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989002 Loctite® Nitrogen Harness Assembly – 2 Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989003 Loctite® Polyethylene Tank Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989004 Loctite® Polyethylene Follower Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989005 Loctite® Tank Air Pressure Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989006 Loctite® Low Level Control Sensor (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989007 Loctite® High & Low Level Control Sensors (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . . .40989008 Loctite® Pressure-Vacuum Tank – Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989011 Loctite® Pump Inlet Adapter Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989012 Loctite® Disposable Desiccant Air Dryer and Lock Down Lid . . . . . . . . . . . . . . . . . . . . . . . . . .39989013 Loctite® Follower Plate with Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989015 Loctite® Electric Agitator Assembly with Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989016 Loctite® Aluminum Accumulator; High-Low Electric Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .40989017 Loctite® Stainless Steel Accumulator; High-Low Electric Controls . . . . . . . . . . . . . . . . . . . . . . .40989018 Loctite® Precision Flow Control Drive – (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989019 Loctite® Electrical Enclosure and Controls for 1 Heat Load . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989020 Loctite® Electrical Enclosure and Controls for 2 Heat Loads . . . . . . . . . . . . . . . . . . . . . . . . . . .40989021 Loctite® Electrical Enclosure and Controls for 3 Heat Loads . . . . . . . . . . . . . . . . . . . . . . . . . . .40989022 Loctite® Electrical Enclosure and Controls for 4 Heat Loads . . . . . . . . . . . . . . . . . . . . . . . . . . .40989023 Loctite® Heat Blanket (720W) and Insulation for 5 or 7.5 L Tank . . . . . . . . . . . . . . . . . . . . . . . .39989024 Loctite® Hose Heater (50W) and Insulation for 1/2" or 3/8" x 2' long . . . . . . . . . . . . . . . . . . . .39989025 Loctite® Pistol Grip - Pneumatic Switch Option – (MMD 1000) . . . . . . . . . . . . . . . . . . . . . . . . .39989026 Loctite® Dispense Valve – 1:1 Nose, Abrasion Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989027 Loctite® Dispense Valve – 1:1 Nose, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989029 Loctite® 3 Way Stainless Steel Ratio Check Valve Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989030 Loctite® Low Level Sensor for one 7.5 L Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989031 Loctite® Vacuum Valving Assembly – 1.0" Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989033 Loctite® Vacuum Valving Assembly – 1.0" Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989035 Loctite® Shipping Crate - 5 and 7.5 L Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989037 Loctite® 7.5 L Tank, High-Low Sensor Ready (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . .39989038 Loctite® LCA Tubing Applicator, 2 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14989039 Loctite® LCA Tubing Applicator, 3 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14989040 Loctite® LCA Tubing Applicator, 4 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14989041 Loctite® LCA Tubing Applicator, 5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14989042 Loctite® LCA Tubing Applicator, 6 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14989070 Loctite® 3/4" MNPT x 1/2" MNPT Hex Nipple, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989071 Loctite® Fitting – 985397 to Primer 3 Way Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989076 Loctite® Secondary Regulator (0 to 725 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989098 Loctite® Dispense Valve – 10:1 Nose, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989099 Loctite® Dispense Valve – 10:1 Nose, Abrasion Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989103 Loctite® High Pressure 3/4" x 6' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . . .77989104 Loctite® High Pressure 3/4" x 12' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . .77989105 Loctite® High Pressure 3/4" x 24' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . .77989106 Loctite® High Pressure 1" x 6' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . . . . .77989107 Loctite® High Pressure 1" x 12' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . . . .77989108 Loctite® High Pressure 1" x 24' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . . . .77989109 Loctite® Medium Pressure Hose 3/8" x 6' – 2,250 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989110 Loctite® Medium Pressure Hose for Dispense Valve 3/8" x 12' – 2,250 psi . . . . . . . . . . . . . . . .77989111 Loctite® Medium Pressure Hose 3/8" x 24' – 2,250 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989112 Loctite® Medium Pressure Hose 1/2" x 6' – 2,000 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989113 Loctite® Medium Pressure Hose for Dispense Valve 1/2" x 12' – 2,000 psi . . . . . . . . . . . . . . . .77989114 Loctite® Medium Pressure Hose 1/2" x 24' – 2,000 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989115 Loctite® Medium Pressure Hose 3/4" x 6' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989116 Loctite® Medium Pressure Hose 3/4" x 12' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989117 Loctite® Medium Pressure Hose 3/4" x 24' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989118 Loctite® Medium Pressure Hose 1" x 6' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989119 Loctite® Medium Pressure Hose 1" x 12' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989120 Loctite® Medium Pressure Hose 1" x 24' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989121 Loctite® 1" JIC M x 3/4" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989122 Loctite® 3/4" JIC M x 3/4" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989123 Loctite® 3/4" JIC M x 1/2" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989124 Loctite® 1/2" JIC M x 3/4" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989125 Loctite® 1/2" JIC M x 1/2" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989126 Loctite® 1/2" JIC M x 1/4" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989127 Loctite® 3/8" JIC M x 1/2" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989128 Loctite® 3/8" JIC M x 3/8" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989129 Loctite® 3/8" JIC M x 1/4" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989130 Loctite® 3/8" JIC M x 3/8" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989131 Loctite® 1/2" JIC M x 1/4" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989132 Loctite® 1/2" JIC M x 1/2" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989133 Loctite® 3/4" JIC M x 3/4" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989134 Loctite® 3/4" JIC M x 1/2" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989135 Loctite® 1" JIC M x 3/4" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989136 Loctite® 3/4" FNPT x 1/4" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989137 Loctite® 3/4" FNPT x 1/2" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989138 Loctite® 1/2" FNPT x 1/8" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989139 Loctite® 1/2" FNPT x 1/4" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989140 Loctite® 3/8" FNPT x 1/8" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989141 Loctite® 3/8" FNPT x 1/4" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989147 Loctite® High Viscosity Hand Gun – Pistol Grip (0 to 4,000 psi) . . . . . . . . . . . . . . . . . . . . . . . . .77989148 Loctite® High Viscosity Hand Gun – In-Line (0 to 3,400 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . .77989161 Loctite® Primary Fluid Regulator Assembly (250 to 4,500 psi) . . . . . . . . . . . . . . . . . . . . . . . . . .77989162 Loctite® Air Operated Fluid Regulator (250 to 4,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989164 Loctite® Optional – Gauge and Isolator Assembly (0 to 5,000 psi) . . . . . . . . . . . . . . . . . . . . . . .77989165 Loctite® Secondary Fluid Regulator Assembly (0 to 725 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . .77989166 Loctite® Optional – Gauge & Isolator Assembly (0 to 1,000 psi) . . . . . . . . . . . . . . . . . . . . . . . . .77989167 Loctite® Particle Filter Assembly (0 to 5,000 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989168 Loctite® Particle Filter – Purge Tube Upgrade Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989169 Loctite® FLR (Filter, Lubricator, Regulator) Assembly, 1/2 inch ports (0 to 100 psi) . . . . . . . . . . .77989170 Loctite® 1/4" MNPT, 1" Long x 0.150" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989171 Loctite® 1/4" MNPT, 1" Long x 0.094" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989172 Loctite® 1/4" MNPT, 1" Long x 0.063" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989173 Loctite® 1/4" MNPT, 2.5" Long x 0.150" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989174 Loctite® 1/4" MNPT, 2.5" Long x 0.094" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989175 Loctite® 1/4" MNPT, 2.5" Long x 0.063" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989176 Loctite® 1/8" MNPT, 1" Long x 0.150" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989177 Loctite® 1/8" MNPT, 1" Long x 0.094" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989178 Loctite® 1/8" MNPT, 1" Long x 0.063" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989179 Loctite® 1/8" MNPT, 2.5" Long x 0.150" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989180 Loctite® 1/8" MNPT, 2.5" Long x 0.094" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989181 Loctite® 1/8" MNPT, 2.5" Long x 0.063" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989182 Loctite® 1.5 mm ID Tapered Stainless Steel Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . .77989183 Loctite® 2 mm ID Tapered Stainless Steel Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . .77989184 Loctite® 3 mm ID Tapered Stainless Steel Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . .77989185 Loctite® 4 mm ID Tapered Stainless Steel Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . .77989186 Loctite® 1.5 mm ID Tapered Acetal Copolymer Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . .77989187 Loctite® 2 mm ID Tapered Acetal Copolymer Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . .77989188 Loctite® 3 mm ID Tapered Acetal Copolymer Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . .77989189 Loctite® 4 mm ID Tapered Acetal Copolymer Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . .77989190 Loctite® 2 mm ID Tapered Aluminum Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . . . . . .77989191 Loctite® 3 mm ID Tapered Aluminum Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . . . . . .77989192 Loctite® 4 mm ID Tapered Aluminum Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . . . . . .77989193 Loctite® Adapter for Straight Thread Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989195 Loctite® MMD Hose – 3/16" X 24", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

125INDEXFor additional information and the full line of equipment, visit www.equipment.loctite.com.ITEMNUMBER PRODUCT NAME PAGE NUMBERITEMNUMBER PRODUCT NAME PAGE NUMBER989198 Loctite® MMD Hose – 3/16" X 72", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989201 Loctite® MMD Hose – 3/16" X 120", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989202 Loctite® MMD Hose – 1/4" X 24", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989203 Loctite® MMD Hose – 1/4" X 72", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989204 Loctite® MMD Hose – 1/4" X 120", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989205 Loctite® MMD Hose – 1/4" X 24", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989206 Loctite® MMD Hose – 1/4" X 72", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989207 Loctite® MMD Hose – 1/4" X 120", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989208 Loctite® MMD Hose – 3/8" X 24", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989209 Loctite® MMD Hose – 3/8" X 72", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989210 Loctite® MMD Hose – 3/8" X 120", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989211 Loctite® MMD Hose – 3/8" X 24", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989212 Loctite® MMD Hose – 3/8" X 72", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989213 Loctite® MMD Hose – 3/8" X 120", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989214 Loctite® MMD Hose – 1/2" X 24", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989215 Loctite® MMD Hose – 1/2" X 72", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989216 Loctite® MMD Hose – 1/2" X 120", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989217 Loctite® MMD Hose – 1/2" X 24", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989218 Loctite® MMD Hose – 1/2" X 72", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989219 Loctite® MMD Hose – 1/2" X 120", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989230 Loctite® High and Low Level Sensor for one 5 or 7.5 L Tank . . . . . . . . . . . . . . . . . . . . . . . . . . .39989231 Loctite® High and Low Level Sensors with Auto Refill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989232 Loctite® Disposable Desiccant Air Dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989233 Loctite® Aluminum Accumulator; High-Low Pneumatic Controls . . . . . . . . . . . . . . . . . . . . . . . .40989234 Loctite® Stainless Steel Accumulator; High-Low Pneumatic Controls . . . . . . . . . . . . . . . . . . . . .40989235 Loctite® Shipping Crate – 5 Gallon Tank Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989244 Loctite® Low Pressure Fluid Regulator (30 to 200 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989245 Loctite® Low Pressure Fluid Regulator (5 to 30 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989268 Loctite® Spray Nozzle Kit – 0.014 Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 69, 85989269 Loctite® Spray Nozzle Kit – 0.028 Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 69, 85989270 Loctite® Spray Nozzle Kit – 0.046 Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85989271 Loctite® Spray Valve Seal Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85989272 Loctite® Spray Valve Hose and Fitting Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85989273 Loctite® Spray Valve – Piston Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85989274 Loctite® PLC Program Backup/Upgrade – (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . . . .40989276 Loctite® 5 or 7.5 L Tank – Vacuum Ready, Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989277 Loctite® Heat Blanket Insulation – 1750 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989347 Loctite® 250 ml Squeeze Tube Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29989352 Loctite® Pail Pump Fitting, 3/4" MNPT x 1/4" MNPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989353 Loctite® Pistol Grip, Electric Switch Option, (MMD 2000, 3000) . . . . . . . . . . . . . . . . . . . . . . . . .39989354 Loctite® Lever Actuated, 1/4" Pneumatic Switch Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989355 Loctite® Lever Actuated, 3/8" Pneumatic Switch Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989356 Loctite® Lever Actuated, 3/8" Electric Switch Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989357 Loctite® Air Operated Mounted Applicator, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55989358 Loctite® 4-Way Solenoid Valve Kit, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55989359 Loctite® 4-Way Solenoid Valve Kit , 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55989388 Loctite® Mounting Bracket for 989161 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77989400 Loctite® Applicator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85989401 Loctite® Standard Pump Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85989402 Loctite® Applicator Nozzle, 1.4 mm ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85989403 Loctite® Applicator Nozzle, 1.9 mm ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85989404 Loctite® Applicator Nozzle, 2.4 mm ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85989415 Loctite® Valve Mounting Boom – 5 or 7 Liter Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989416 Loctite® Valve Mounting Boom – 5 Gallon Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39989433 Loctite® Cable, Loctite® SCARA Robot for use with Junction Box, 25 Pin, M-F . . . . . . . . . . . . .91989434 Loctite® Junction Box Cable for Benchtop Robots, 37 Pin MD x 25 Pin FD . . . . . .87, 88, 89, 90, 91989516 Loctite® 200 / 400 ml Mix Nozzle, Stepped, 32 elements (50 pack) . . . . . . . . . . . . . . . . . . . . .82989518 Loctite® 200 / 400 ml Mix Nozzle, Stepped, 48 elements (10 pack) . . . . . . . . . . . . . . . . . . . . .82989620 Loctite® AC Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100989656 Loctite® Teach Point Software for Loctite® Benchtop Robots . . . . . . . . . . . . . .87, 88, 89, 90, 91989657 Loctite® Teach Pendant for Loctite® Benchtop Robots . . . . . . . . . . . . . . . . . . . . . .87, 88, 89, 90989661 Loctite® PLC Interface Cable (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40989748 Loctite® Posi-Link 10-50 Cartridge Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84989751 Loctite® Posi-Link 10-50, 10 ml Barbed Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84989752 Loctite® Posi-Link 10-50, 25 ml Barbed Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84989753 Loctite® Posi-Link 5-25, 5 ml Barbed Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84989754 Loctite® Posi-Link 5-25, 10 ml Barbed Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84989755 Loctite® Posi-Link 5-25, 25 ml Barbed Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84989763 Loctite® 200 Series Light Curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989771 Loctite® 300 Series Light Curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989777 Loctite® 400 / 500 Series Light Curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989783 Loctite® 200 Series Workbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989784 Loctite® 300 Series Workbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989785 Loctite® 400 / 500 Series Workbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989787 Loctite® 200 Series Slide Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989788 Loctite® 300 Series Slide Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989789 Loctite® 400 / 500 Series Slide Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989852 Loctite® SCARA Light Curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989860 Loctite® SCARA Series Workbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95989929 Loctite® AC Charger for LED-HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101989937 Loctite® Applicator Nozzle, 1.2 mm ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85992641 Loctite® Pressure Safety Relief for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84993163 Loctite® Replacement Tubing for 97001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84993174 Loctite® Replacement Nozzle for 97001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84993247 Loctite® Nut and Sleeve for 98085 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84997312 Loctite® Reservoir Lid Sub-Assembly O-Ring for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84997569 Loctite® Silicone Grease – 6 gram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66,84998353 Loctite® Reservoir Liner for Shot Miser Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22998390 Loctite® Vari-Drop Applicator Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81, 84998400 Loctite® Dial-A-Seal® Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 13998402 Loctite® Pump Rebuild Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85998425 Loctite® Replacement Turret . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85998426 Loctite® Replacement Cap for 1 Liter Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .851003327 Loctite® LED-HD Timer Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1011007349 Loctite® CureJet LED Dosimeter Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102, 1131008335 Loctite® SCARA-N Robot, 444A, 4A 220V CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 911008336 Loctite® SCARA-N Robot, 444A, 4A, 220V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 911008337 Loctite® SCARA-N Robot, 444A 4A, 110V CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 911008338 Loctite® SCARA-N Robot, 444A, 4A ,110V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 911008339 Loctite® SCARA-N Robot, 443A, 3A 220V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 911008340 Loctite® SCARA-N Robot, 443A, 3A, 110V CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 911008351 Loctite® SCARA-N Robot, 443A 3A, 110V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 911008352 Loctite® Interconnecting Cable for CureJet Controller – 3 m . . . . . . . . . . . . . . . . . . . . . . . .1021008353 Loctite® Interconnecting Cable for CureJet Controller – 1 m . . . . . . . . . . . . . . . . . . . . . . . .1021008552 Loctite® SCARA-N Robot, 443A, 3A 220V CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 911012854 Loctite® Hysol PUR Hot Melt Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 511015106 Loctite® Teach Pendant for Loctite ® S440 Series SCARA-N Robot . . . . . . . . . . . . . . . . . . . . . . .911022006 Loctite® Muti-Function Digital Controller . . . . . . . . . . . . . . .15, 17, 59, 61, 65, 66, 67, 68, 71, 721025264 Loctite® Fiber Optic Light Guide Radiometer Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1041032026 Loctite® Static Mix Nozzle 8mm x 32E (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .821032028 Loctite® Static Mix Nozzle 8mm x 32E (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .821034024 Loctite® 50 ml-S 10:1 Spare Plunger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251034026 Loctite® 50 ml-S 10:1 Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . .23, 251034575 Loctite® Static Mixer 50 ml, 10:1-S (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25, 821041620 Loctite® DuraPump Pneumatic MMA Custom system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341041633 Loctite® DuraPump Pneumatic Custom GP system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341041635 Loctite® DuraPump Programmable Custom Ratio System . . . . . . . . . . . . . . . . . . . . . . . . . . .331041636 Loctite® DuraPump Pneumatic MMA 10:1 system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341041637 Loctite® DuraPump Pneumatic 10:1 GP system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341041638 Loctite® DuraPump Programmable 10:1 GP System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331041639 Loctite® DuraPump Programmable 4:1 GP System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331041641 Loctite® DuraPump Pneumatic 4:1 GP system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341041643 Loctite® DuraPump Pneumatic 2:1 GP system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341041644 Loctite® DuraPump Programmable 2:1 GP System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331041647 Loctite® DuraPump Pneumatic MMA 1:1 system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341041648 Loctite® DuraPump Pneumatic 1:1 GP system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341041649 Loctite® DuraPump Programmable 1:1 GP System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331044246 Loctite® Nozzle, Aero Gasket Cartridge, 10 PK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .811044247 Loctite® Cartridge-Syringe Adapter, 1/4" NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .811044248 Loctite® 2-Hand Anti-Tie-Down Switch Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 841044249 Loctite® Cable Connector Plug Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171044301 Loctite® LED-HD Pistol Grip Battery Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1011045339 Loctite® Needle-Cartridge Adapter, 1/4" NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .811051627 Loctite® Hose Heat Controller for 1 or 2 Heated Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051629 Loctite® Low Level Sensing Option – Poly Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051630 Loctite® Low Level Sensing Option – Stainless Steel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051651 Loctite® Dual Tank Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051654 Loctite® Tank Heater and Controls Option (For Stainless Steel Tank Only) . . . . . . . . . . . . . . . . .391051655 Loctite® Agitator Assembly (For Stainless Steel Tank Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051656 Loctite® Follower Plate with Handle (For Stainless Steel Tank Only) . . . . . . . . . . . . . . . . . . . . . .391051657 Loctite® Disposable Desiccant Air Dryer Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051659 Loctite® 7 L Stainless Steel Gravity Tank with Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051660 Loctite® 9.5 L Poly Gravity Tank with Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051661 Loctite® DuraPump Pistol Grip, Pneumatic Switch (All ratios) . . . . . . . . . . . . . . . . . . . . . . . .391051662 Loctite® DuraPump Dispense Valve – MMA with Snuffback (All ratios) . . . . . . . . . . . . . . . . .391051663 Loctite® DuraPump Dispense Valve – MMA (All ratios) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051664 Loctite® DuraPump Dispense Valve – with Snuff back (All ratios) . . . . . . . . . . . . . . . . . . . . .391051665 Loctite® DuraPump Dispense Valve (All ratios) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051666 Loctite® DuraPump Heated Hose Option, 144" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051667 Loctite® DuraPump Heated Hose Option, 96" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051668 Loctite® DuraPump Heated Hose Option, 48" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051669 Loctite® Hose for Dispense Valve – 3/8" x 96" MMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051670 Loctite® Hose for Dispense Valve – 3/8" x 24" MMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051691 Loctite® Hose for Dispense Valve – 3/8" x 96" General Purpose . . . . . . . . . . . . . . . . . . . . . . . .391051692 Loctite® Hose for Dispense Valve – 3/8" x 24" General Purpose . . . . . . . . . . . . . . . . . . . . . . . .391051693 Loctite® Hose for Dispense Valve – 3/8" x 144" General Purpose . . . . . . . . . . . . . . . . . . . . . . .391051694 Loctite® Hose for Dispense Valve – 3/8" x 96" MMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391051695 Loctite® Precision Hydraulic Flow Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .391053256 Loctite® Spray Timer Cable – Bulk 34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .561053262 Loctite® 200 / 400 ml Mix Nozzle, Stepped, 6 mm (2,000 pack) . . . . . . . . . . . . . . . . . . . . . . . .821060662 Loctite® Adapter for 1/8"-28 BSPP Nozzles, 1/8" BSPP x 1/4" NPS . . . . . . . . . . . . . . . . . . . . . .778900064 Loctite® Tank Feed Line Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .848900494 Loctite® Replacement Battery Kit for Loctite® LED Light Sources . . . . . . . . . . . . . . . . . . . . . .1008900513 Loctite® Precision O-Ring Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .978900550 Loctite® PLC Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 1018950210 Loctite® Replacement Reservoir Lid O-Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .848950450 Loctite® Pneumatic Supply Fitting for 97123 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .848951124 Loctite® Valves and Advancing Slide Pneumatic Fitting for 97123 . . . . . . . . . . . . . . . . . . . . . . .848965008 Loctite® Pressure Sensor and Cable for In-line Flow Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . .79ANZ023N01 Loctite® Standard Adapter / Check Valve / Jam Nut for Nozzles . . . . . . . . . . . . . . . . . . . . . . . .49