Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
STARGET 03 I 2009<br />
MAGAZINE FOR CUSTOMERS AND PARTNERS OF STRAUMANN<br />
FOCAL POINTS<br />
Straumann ® Anatomic IPS e.max ® Abutment:<br />
Esthetics by design – in cooperation with Ivoclar Vivadent<br />
etkon_visual 5.0: The next generation of Straumann’s<br />
CADCAM software<br />
“Ceramics – the future of tooth replacement?”<br />
Interview with Joachim Maier<br />
Acquisition in the Guided Surgery area: Straumann takes<br />
over the dental business of IVS Solutions<br />
New: Long and adapted impression posts for the Straumann ®<br />
Bone Level Implant<br />
Clinical cases: Esthetic results with Straumann ® BoneCeramic,<br />
the Straumann ® Bone Level Implant and Straumann ® CADCAM<br />
Preview: “Guidelines for the Practitioner” – 18 th Scientific<br />
Annual Congress of the EAO in Monaco
TABLE OF CONTENTS<br />
Internet: www.<strong>straumann</strong>.<strong>com</strong>/starget or your specific country website www.<strong>straumann</strong>.(xy)/starget<br />
03 Editorial<br />
FOCAL POINTS<br />
STRAUMANN ®<br />
ANATOMIC IPS E.MAX ®<br />
ABUTMENT<br />
04 Esthetics by Design made<br />
by Straumann and Ivoclar<br />
Vivadent<br />
Background<br />
10 Ceramics – the future of<br />
tooth replacement? Interview<br />
with Joachim Maier<br />
etkon_visual 5.0<br />
12 The next generation of<br />
Straumann’s CADCAM<br />
software<br />
Products<br />
20 New impression posts for<br />
the Bone Level Implant<br />
Guided Surgery<br />
22 Straumann and IVS: an<br />
integral solution for Guided<br />
Surgery<br />
Clinical Cases<br />
24 A long-term esthetic result<br />
with BoneCeramic by Ronald<br />
Jung and Xavier Zahno<br />
28 Esthetic restoration of a<br />
RC Bone Level Implant with<br />
a CADCAM ceramic abutment<br />
by Raymond Dubs and<br />
Rudolf Auer<br />
Events<br />
© Grimaldi Forum picture on the cover: Monaco Press Centre<br />
32 18 th Annual Scientific Meeting<br />
of the EAO in Monaco<br />
36 FDI Annual World Dental<br />
Congress 2009 in Singapore<br />
38 Straumann Solutions @ IDS<br />
2009 in Cologne<br />
41 Straumann Corporate Forum<br />
at the AO in San Diego<br />
44 95 th Annual Meeting of the<br />
AAP in Boston<br />
46 AEEDC Congress in Dubai<br />
47 ITI Esthetic Course in the UAE<br />
48 Events overview 2009/2010<br />
Simply Doing More<br />
52 Literature alerts<br />
Imprint: STARGET – An International Magazine for Customers and Partners of Straumann I © Institut Straumann AG I Peter Merian-Weg 12 I CH-4002 Basel I<br />
Phone +41 (0)61 965 11 11 I Fax +41 (0)61 965 11 01 I Editors: Roberto González I Mildred Loewen I E-Mail: starget@<strong>straumann</strong>.<strong>com</strong> I Internet:<br />
www.<strong>straumann</strong>.<strong>com</strong>/starget I Appearance: 4 times per year I Layout/Design: EMS &P Kommunikation GmbH, www.ems-p.<strong>com</strong> I Printing: Dietschi AG I<br />
Hauptstrasse 22 I CH-4437 Waldenburg<br />
Legal Notice: Exclusion of liability for articles by external authors: articles by external authors published in STARGET have been systematically assessed and carefully<br />
selected by the publisher of STARGET (Institut Straumann AG, Basel). Such articles in every case reflect the opinion of the author(s) concerned and therefore do not necessarily<br />
coincide with the publisher’s opinion. Nor does the publisher guarantee the <strong>com</strong>pleteness or accuracy and correctness of articles by external authors published in
Dear readers,<br />
This issue of STARGET focuses on prosthetic<br />
topics and I am happy to introduce to you<br />
two innovations from Straumann in this area. These offer our customers<br />
genuine added value and have the potential to set new standards. With<br />
Straumann and Ivoclar Vivadent two global leaders in their respective<br />
fields – implant dentistry, prosthetics and CADCAM in one case and<br />
ceramic materials and highly esthetic restorations in the other – have <strong>com</strong>bined<br />
their strengths into synergies. The first product of this collaboration<br />
is the Straumann ® Anatomic IPS e.max ® Meinhard Schmidt<br />
Head of Business Unit Prosthetics<br />
Abutment, which was developed<br />
for high-quality esthetics and stability.<br />
With the Straumann ® Anatomic IPS e.max ® Abutment, you can take the<br />
first steps and gain initial experiences with highly esthetic anatomical<br />
ceramic restorations. These experiences can form the basis for using future<br />
developments in CADCAM technology such as those of the Straumann ®<br />
CADCAM system. And in this area, I would like to introduce the second<br />
innovation: etkon_visual 5.0, the next generation of Straumann’s CAD-<br />
CAM software. The innovations implemented in this version offer the user<br />
a very wide range of materials and additional design options developed<br />
in collaboration with Ivoclar Vivadent. The em<strong>ph</strong>asis is on the additional<br />
modules of “Ivoclar IPS e.max ® CAD glass ceramic” and “CAD constructions<br />
of Straumann ® CADCAM abutments”. These two modules allow the<br />
user to perform <strong>com</strong>puter-assisted modeling of caps and fully anatomical<br />
crowns made of Ivoclar IPS e.max ® CAD glass ceramic and individual<br />
abutments made of zirconia and titanium for the Straumann ® Dental<br />
Implant System.<br />
These two innovations are important building blocks in a <strong>com</strong>plete chain<br />
of products and services and in a system with perfectly coordinating<br />
<strong>com</strong>ponents, for the benefit of the patient and with the proven Straumann<br />
quality from the implant to the final prosthetic restoration.<br />
I trust you will find it interesting.<br />
Meinhard Schmidt<br />
STARGET. The information given in clinical case descriptions, in particular, cannot replace a dental assessment by an appropriately qualified dental specialist in an individual<br />
case. Any orientation to articles published in STARGET is therefore on the dentist’s responsibility. Articles published in STARGET are protected by copyright and may not be<br />
reused, in full or in part, without the express consent of the publisher and the author(s) concerned. Third party corporate names and brand names that may be mentioned<br />
may be registered or otherwise protected marks even if this is not specially indicated. The absence of such an indication shall not therefore be interpreted as allowing such a<br />
name to be freely used.<br />
Product availability: Certain products and services mentioned in this edition of STARGET may not be available or not yet available in all countries. In case of doubt please<br />
contact your local Straumann distributor for information on product availability (addresses of Straumann branches can be found on page 55).<br />
STARGET 3 I 09 03<br />
EDITORIAL
04 STARGET 3 I 09 STRAUMANN ® ANATOMIC IPS E.MAX ® ABUTMENT FOCAL POINT<br />
Esthetics by design: the Straumann ®<br />
The Straumann ® Anatomic IPS e.max ® Abutment 1 – a new flexible and esthetic<br />
restorative product resulting from technology synergy between Straumann and<br />
Ivoclar Vivadent<br />
When two global leaders in dentistry join their know-how and under-<br />
standing of customer needs, the result is likely to set new standards.<br />
Straumann is the partner of choice for esthetic restorations<br />
and innovations in implant dentistry. Ivoclar Vivadent is<br />
an innovator in all ceramics, specializing in ceramic<br />
materials and high esthetic restorations. The synergy of<br />
technologies between the two <strong>com</strong>panies has resulted in<br />
a premium esthetic solution – the Straumann ® Anatomic<br />
IPS e.max ® Abutment.<br />
DESIGN AND PRECISION<br />
MADE BY STRAUMANN AND<br />
IVOCLAR VIVADENT
Anatomic IPS e.max ® Abutment<br />
The Straumann ® Anatomic IPS<br />
e.max ® Abutment is a standardized<br />
premium ZrO 2 ceramic abutment,<br />
designed for high esthetics and<br />
strength. Featuring a prepared<br />
mucosa margin for adaptation to<br />
natural soft tissue contour, formed<br />
by using the bone level gingival<br />
former designed for the Consistent<br />
Emergence Profiles, the proven<br />
Straumann ® CrossFit Connection<br />
and pre-shaded IPS e.max ® zirconium<br />
dioxide material, it is engineered<br />
for flexible and reliable use.<br />
FOCAL POINT STRAUMANN ® ANATOMIC IPS E.MAX ® ABUTMENT<br />
The Straumann ® Anatomic IPS<br />
e.max ® Abutment is indicated for<br />
cement-retained crowns and bridges<br />
via mesostructure, and for direct<br />
veneered screw-retained crowns.<br />
With the use of the Straumann ®<br />
Anatomic IPS e.max ® Abutment the<br />
restorative team can apply an anatomically<br />
formed, ZrO 2 abutment<br />
and make first steps and experiences<br />
with highly esthetic, anatomic<br />
ceramic restorations. These experiences<br />
might build the basis for<br />
future use of advanced CADCAM<br />
technologies such as the Straumann<br />
CADCAM System.<br />
A strategic cooperation based<br />
on <strong>com</strong>plementary strengths in<br />
restorative dentistry<br />
The cooperation between Straumann<br />
and Ivoclar Vivadent builds on<br />
<strong>com</strong>plementary strengths in restorative<br />
dentistry and the success of<br />
both <strong>com</strong>panies to develop and<br />
provide solutions to the needs of<br />
dental professionals and patients<br />
around the world.<br />
Straumann has pioneered many<br />
influential technologies in the fields<br />
of implant and restorative dentistry.<br />
A <strong>com</strong>plete, <strong>com</strong>prehensive and<br />
transparent range of soft tissue and<br />
bone level implants and prosthetic<br />
products, <strong>com</strong>bined with an innovative<br />
regenerative product range,<br />
make Straumann the partner of<br />
choice for many dental professionals<br />
around the world.<br />
Ivoclar Vivadent is a global leader<br />
in the development and production<br />
of ceramic dental restorations,<br />
offering a <strong>com</strong>prehensive dental<br />
product portfolio and an innovative,<br />
premium ceramic product range at<br />
its core. Ivoclar Vivadent ceramic<br />
products are valued and used by<br />
dental professionals around the<br />
world for highly reliable and esthetic<br />
prosthetic solutions.<br />
By <strong>com</strong>bining core <strong>com</strong>petencies<br />
and experiences, Straumann and<br />
Ivoclar Vivadent have jointly developed<br />
the new Straumann ® Anatomic<br />
IPS e.max ® Abutment, resulting<br />
in design and precision made by<br />
Straumann and Ivoclar Vivadent.<br />
The Straumann ® Anatomic IPS<br />
e.max ® Abutment is exclusively sold<br />
by Straumann. Local Straumann<br />
organizations can be contacted for<br />
more details 2 .<br />
STARGET 3 I 09 05<br />
1 Initially available for<br />
RC connection only,<br />
material of the Straumann ®<br />
Anatomic IPS e.max ®<br />
Abutment is ZrO 2.<br />
2 Please note that<br />
certain products and<br />
services mentioned in<br />
this STARGET article<br />
may not (yet) be available<br />
in all countries.<br />
Please contact your<br />
local Straumann subsidiary<br />
or distributor for<br />
information regarding<br />
product availability.
06 STARGET 3 I 09 STRAUMANN ® ANATOMIC IPS E.MAX ® ABUTMENT FOCAL POINT<br />
High esthetic restorations with a high<br />
The Straumann ® Anatomic IPS<br />
e.max ® Abutment is made of zirconium<br />
dioxide (ZrO 2) and is offered<br />
on the Regular CrossFit Connection<br />
(RC) already known in the<br />
Straumann Bone Level Implant line.<br />
It is indicated for screw-retained<br />
single-tooth restorations as well as<br />
for cement-retained single-tooth<br />
and bridge restorations (via meso<br />
structure). With a choice of 2<br />
colors (MO 0/MO 1), straight<br />
and angled designs, and 2 different<br />
gingival heights the Straumann ®<br />
Anatomic IPS e.max ® Abutment<br />
offers high flexibility in its application<br />
(see table).<br />
Color straight 15° angled<br />
MO 0 White<br />
MO 1 Shaded<br />
GH 2mm GH 3.5mm GH 2mm GH 3.5mm<br />
coronal Ø Ø 4.1mm Ø 4.8mm<br />
connection Regular CrossFit<br />
RC<br />
Executing the same simplified<br />
and efficient processes of existing<br />
Straumann Abutments<br />
The design of the Straumann ®<br />
Anatomic IPS e.max ® Abutment<br />
corresponds to the Straumann ®<br />
Titanium Anatomic Abutment<br />
range. For this reason, the existing<br />
Straumann ® CrossFit PLAN Set<br />
can be used for easy and fast intraoral<br />
prosthetic planning. No additional<br />
investment in instruments and<br />
no adaptation to new procedures<br />
are required. Dentists and dental<br />
technicians working with the<br />
Straumann ® Anatomic IPS e.max ®<br />
Abutment can benefit from the simplified<br />
and efficient processes they<br />
are accustomed to and can anticipate<br />
a superior end result.<br />
The well-known Straumann ® CrossFit PLAN<br />
Set can be used to plan restorations with the<br />
Straumann ® Anatomic IPS e.max ® Abutment.<br />
The Straumann ® Anatomic IPS<br />
e.max ® Abutment, with its anatomically<br />
pre-shaped design and its prepared<br />
mucosa margin, supports fast<br />
adaption to the individual patient<br />
situation, thereby reducing the need<br />
for time consuming grinding in the<br />
dental laboratory and allowing<br />
dental technicians to work in a<br />
familiar, standardized restorative<br />
workflow.
degree of flexibility<br />
The prepared mucosa margin of the Straumann ®<br />
Anatomic IPS e.max ® Abutment supports easy<br />
and fast restorative procedures.<br />
Consistent Emergence Profiles<br />
– the state-of-the-art in soft tissue<br />
management<br />
The Consistent Emergence Profiles<br />
concept of the Straumann ® Bone<br />
Level Implant and prosthetic line<br />
are state-of-the-art in soft tissue management<br />
and post-surgical healing<br />
of the mucosal tissue around the<br />
implant. Due to matched emergence<br />
profiles of healing abutment,<br />
temporary abutment and final abutment,<br />
the soft tissue can regenerate<br />
without adapting to new profiles.<br />
When the Straumann ® Anatomic<br />
IPS e.max ® Abutment is used for<br />
a restoration, patients benefit from<br />
esthetic out<strong>com</strong>es and painless<br />
treatments from start to finish.<br />
FOCAL POINT STRAUMANN ® ANATOMIC IPS E.MAX ® ABUTMENT<br />
A consistent emergence profile<br />
from healing abutment to the final<br />
abutment results in simplified and<br />
optimized soft tissue management.<br />
Flexibility in application through<br />
mechanical properties<br />
The strength and machining characteristics<br />
of Ivoclar Vivadent’s IPS<br />
e.max (ZrO 2) dioxide ceramic make<br />
this material ideal for the fabrication<br />
of durable, high-precision and<br />
highly esthetic abutments. The material<br />
properties, in <strong>com</strong>bination with<br />
the design and production process<br />
technology of the Straumann ® Anatomic<br />
IPS e.max ® Abutment, result<br />
in an excellent mechanical stability.<br />
To test the mechanical properties<br />
of the Straumann ® Anatomic IPS<br />
e.max ® Abutment, fatigue strength<br />
testing according to the ISO<br />
14801 standard was conducted.<br />
With 2 million validation cycles<br />
at 2Hz at the same benchmark<br />
load as the titanium abutments, the<br />
Straumann ® Anatomic IPS e.max ®<br />
Abutment met all acceptance<br />
criteria. These proven mechanical<br />
qualities allow the restorative team<br />
high flexibility for indication and<br />
application.<br />
�<br />
�<br />
nominal<br />
bonelevel<br />
3<br />
F<br />
6.5<br />
11 ±0,1<br />
STARGET 3 I 09 07<br />
A consistent emergence<br />
profile from healing<br />
abutment to the final<br />
abutment results in simplified<br />
and optimized soft<br />
tissue management.<br />
The Straumann ®<br />
Anatomic IPS e.max ®<br />
Abutment successfully<br />
passed ISO-defined<br />
fatigue strength tests with<br />
over 2 million validation<br />
cycles.
08 STARGET 3 I 09 STRAUMANN ® ANATOMIC IPS E.MAX ® ABUTMENT FOCAL POINT<br />
With the Straumann<br />
CrossFit Connection,<br />
the micro-gap between<br />
implant and abutment<br />
has a dimension of<br />
below 1µm*, which is<br />
smaller than an E. coli<br />
bacterium.<br />
*0.6 ± 0.3µm (n=36)<br />
The Straumann ® Anatomic IPS<br />
e.max ® Abutment allows the dental<br />
technician to directly veneer the<br />
restoration (CTE (100–500 °C)<br />
10,80 ± 0,25 10 -6 K -1 ) with a<br />
layering ceramic like IPS e.max ®<br />
Ceram or use the IPS e.max ®<br />
ZirPress ingots for the press-ontechnique,<br />
which reduces the time<br />
needed to build the final restoration.<br />
The Straumann ® Anatomic IPS<br />
e.max ® Abutment is part of the<br />
Straumann ® Bone Level Implant line,<br />
which features the unique Cross-<br />
Fit Connection. In addition to its<br />
mechanical benefits, the CrossFit<br />
Connection prevents bacterial<br />
infiltration and related infections<br />
through its shape and through a<br />
minimal micro gap between implant<br />
and abutment of smaller then 1µm,<br />
which is below the industry standard.<br />
Studies indicate that dimension<br />
and shape of the micro gap can<br />
substantially reduce the risk of infection<br />
and related <strong>com</strong>plications and<br />
are therefore one of the key factors<br />
for crestal bone preservation, which<br />
is the fundament for esthetic longterm<br />
results.<br />
Titanium Titanium/ Gold<br />
Ceramics<br />
Crowns and bridges<br />
EFFICIENCY ESTHETICS<br />
Cementable<br />
Visible results: The esthetics of<br />
the Straumann ® Anatomic IPS<br />
e.max ® Abutment<br />
Anatomic<br />
Dentists and dental technicians aim<br />
for highly esthetic results, which<br />
increase the likelihood that patients<br />
will be most satisfied with their treatment<br />
result. This can promote the<br />
involved dental professionals within<br />
their <strong>com</strong>munity because satisfied<br />
customers are one of the most effective<br />
advertisements for any dental<br />
business. In connection with this, the<br />
all-ceramic Straumann ® Anatomic<br />
IPS e.max ® Abutment enables highly<br />
esthetic results by avoiding shimmering<br />
through of metal and resembling<br />
natural tooth characteristics such as<br />
shape and color.<br />
The Straumann ® Anatomic IPS e.max ®<br />
Abutment <strong>com</strong>plements the Straumann ®<br />
Dental Implant System in the field of<br />
bone level applications.<br />
Gold<br />
SIMPLICITY FLEXIBILITY<br />
Hybrid LOCATOR ® , bar<br />
Multi-Base<br />
for bridges only<br />
Customized<br />
Customized<br />
Individualized bar,<br />
telescopic construction<br />
Clinical cases involving the<br />
Straumann ® Anatomic IPS e.max ®<br />
Abutment are in preparation and<br />
will be presented in the future<br />
issues of STARGET.<br />
The new Straumann ® Anatomic<br />
IPS e.max ® Abutment in the<br />
Straumann ® Dental Implant<br />
System<br />
The Straumann ® Anatomic IPS<br />
e.max ® Abutment <strong>com</strong>pletes the<br />
prosthetic product range of the<br />
Straumann ® Bone Level Implant<br />
line. With this new abutment, the<br />
restorative team has the possibility<br />
to choose from a range of standardized,<br />
anatomic all-ceramic abutments<br />
made by Ivoclar Vivadent
from the IPS e.max ® (ZrO 2) material.<br />
The prosthetic solution is still<br />
selected on basis of the patient’s<br />
specific situation and clinical indication,<br />
but now with the option of<br />
using an all-ceramic pre-shaped<br />
abutment.<br />
By using the Straumann ® Anatomic<br />
IPS e.max ® Abutment the restorative<br />
team can apply an anatomically<br />
formed, ZrO 2 abutment and make<br />
first steps and experiences with<br />
highly esthetic ceramic restorations.<br />
That demand can be fulfilled<br />
with cemented all ceramic crowns.<br />
These can be zirconia-based<br />
crowns (IPS e.max ® ZirCAD framework)<br />
veneered with the highly<br />
esthetic layering ceramic IPS e.max ®<br />
Ceram or fully anatomic pressed/<br />
milled lithium-disilicate ceramic like<br />
IPS e.max ® Press or IPS e.max ®<br />
CAD.<br />
These experiences with highly<br />
esthetic all-ceramic crowns and the<br />
Straumann ® Anatomic IPS e.max ®<br />
Abutment might build the basis for<br />
future use of advanced CADCAM<br />
technologies such as the Straumann<br />
CADCAM System.<br />
FOCAL POINT STRAUMANN ® ANATOMIC IPS E.MAX ® ABUTMENT<br />
Characteristics<br />
2 color shades<br />
2 gingiva heights<br />
Straight and angled form<br />
CrossFit Connection<br />
Consistent Emergence Profiles<br />
Summary<br />
Integrated into the Straumann ®<br />
Dental Implant System<br />
CrossFit PLAN Set<br />
Direct veneering option<br />
IPS e.max ® (ZrO 2 ) material<br />
The Straumann ® Anatomic IPS<br />
e.max ® Abutment enables dentists<br />
and dental technicians to provide<br />
patients with a highly esthetic<br />
restorations with a high degree<br />
of flexibility.<br />
Advantages<br />
Better esthetics through flexible adaption to patient<br />
teeth color and anatomy.<br />
Flexible adaption to patient dental anatomy and<br />
implant placement.<br />
The self-guiding connection makes handling easier, ensures<br />
precision and offers long-term stability as well as restorative<br />
flexibility.<br />
• Optimizes and simplifies the soft tissue management process<br />
throughout the treatment<br />
• Eases the fabrication of temporary restorations<br />
The choice for dentists and dental technicians to select the<br />
best solution under clinical and economic considerations.<br />
Use of the proven and familiar Straumann ® CrossFit PLAN Set<br />
• No new investments necessary<br />
• Application of the same prosthetic procedures,<br />
no change required<br />
The Straumann ® Anatomic IPS e.max ® Abutment allows the<br />
dental technician to directly veneer the restoration or use the<br />
press-on technique, which reduces the time needed to build<br />
the final restoration.<br />
High quality zirconium oxide ceramic from Ivoclar Vivadent<br />
with outstanding esthetic and material properties.<br />
Supports first experiences with anatomically formed ceramic<br />
abutments which might be a basis for possible future use of<br />
advanced CADCAM technologies such as the Straumann<br />
CADCAM System.<br />
Availability<br />
The Straumann ® Anatomic IPS<br />
e.max ® Abutment will be available<br />
for use with the Straumann ®<br />
RC Bone Level implants as of July<br />
2009 2 . Clinical cases are in preparation<br />
and will be presented in<br />
future STARGET issues together<br />
with a <strong>com</strong>prehensive conception<br />
of the IPS e.max ® system.<br />
STARGET 3 I 09 09<br />
2 Please note that<br />
certain products and<br />
services mentioned in<br />
this STARGET article<br />
may not (yet) be available<br />
in all countries.<br />
Please contact your<br />
local Straumann subsidiary<br />
or distributor for<br />
information regarding<br />
product availability.
10 STARGET 3 I 09 BACKGROUND<br />
Ceramics: the future material of choice<br />
for tooth replacement?<br />
An interview with Joachim Maier, Master Dental Technician<br />
Ceramics play a major role in<br />
modern dentistry. What makes<br />
them so important?<br />
The discovery that high-performance<br />
ceramics could be used in<br />
dental engineering was made more<br />
than ten years ago, when zirconium<br />
oxide had proven to be highly<br />
resilient in extreme conditions, for<br />
instance in hip prostheses, or in<br />
motor vehicle brakes. The stability<br />
it showed was <strong>com</strong>parable to that<br />
of precious metal alloys in <strong>com</strong>mon<br />
use, but it was lighter and bio<strong>com</strong>patible.<br />
Ceramics are particularly attractive<br />
to patients who prefer to have<br />
what are considered ‘bio-materials’<br />
in their mouths rather than metal<br />
alloys. In my lab, the bio-lifestyle<br />
has led to an enormous increase in<br />
demand over the past few years.<br />
At the same time, there has been<br />
a clear increase in the number<br />
of people who have allergies to<br />
metal. For them, metal-free replacements<br />
are the solution.<br />
Will demand for ceramics in dentistry<br />
continue to increase?<br />
I’m certain it will. In Switzerland<br />
and Germany, probably 80 percent<br />
of all crowns and bridges will<br />
be metal-free in ten years’ time.<br />
The trend towards bio<strong>com</strong>patible<br />
materials is increasing, because<br />
people today are well-informed,<br />
especially by the specialist health<br />
and lifestyle magazines, and selective.<br />
The most <strong>com</strong>pelling argument<br />
for ceramics is their esthetic properties.<br />
It is crucial for the patient that<br />
a bridge or a single artificial tooth<br />
should look natural. We apply up<br />
to five ceramic layers one on top of<br />
the other, which in turn are stained<br />
with up to 15 different shades. It<br />
is the interplay between these different<br />
stains that confers a natural<br />
look. This process is done by hand,<br />
which means that on average our<br />
dental technicians make only one<br />
or two units a day.<br />
Then a ceramic bridge must be<br />
more expensive than a conventional<br />
metal bridge?<br />
No, in some cases a ceramic<br />
solution actually costs less than,<br />
for example, a crown with a gold<br />
substructure. Although making substructures<br />
from high-performance<br />
ceramics is labor-intensive, the<br />
material costs are considerably<br />
lower and usually offset the labor<br />
charges. This is especially true for<br />
gold crowns, which have be<strong>com</strong>e<br />
very expensive with the rising price<br />
of gold. Ceramic solutions are an<br />
affordable alternative and make it<br />
possible for the patient to invest in<br />
an esthetically more so<strong>ph</strong>isticated<br />
and more appealing veneer. The<br />
color, shape, natural appearance<br />
and esthetics of new teeth are like<br />
a personal visiting card, especially<br />
in the anterior region of the mouth.<br />
Here, too, we do our utmost for the<br />
patient.
“IN SWITZERLAND AND GERMANY, PROBABLY 80 PERCENT OF ALL CROWNS<br />
AND BRIDGES WILL BE METAL-FREE IN TEN YEARS’ TIME.”<br />
What developments are necessary<br />
in the next few years?<br />
There is still quite a lot to do in<br />
the field of ceramic veneering.<br />
For example, silicate ceramic is a<br />
material that offers outstanding optical<br />
properties for natural looking<br />
prosthetics but its mechanical resilience<br />
has to improve before it can<br />
be used more widely. Alternative<br />
veneering ceramics are available,<br />
which meet our <strong>com</strong>pany’s stability<br />
requirements.<br />
Are ceramic prosthetics subject<br />
regulatory requirements e.g. for<br />
quality?<br />
Of course they are tested and have<br />
to meet certain standards. But the<br />
loads in the mouth are many and<br />
diverse and different for every individual.<br />
It is difficult to exactly simulate<br />
these loads in studies.<br />
What would be the biggest<br />
breakthrough in dental ceramics?<br />
A really big breakthrough<br />
would be if the osseointegration<br />
of ceramic implants could be<br />
improved to increase their success.<br />
Then it would be possible to offer<br />
an all-ceramic, metal-free solution,<br />
which would go a long way<br />
towards satisfying preferences for<br />
biomaterials. The most well-known<br />
ceramic implants have a one-piece<br />
design. During the healing <strong>ph</strong>ase<br />
of 4–6 months they have to be<br />
protected from the tongue and<br />
cheek pressure. The splints and<br />
interim prostheses used for this are<br />
not always <strong>com</strong>fortable for the<br />
patient. A further problem at the<br />
moment is also the lower success<br />
rate of these implants in the more<br />
porous bone of the mandible. In<br />
this respect ceramics are still at the<br />
stage where titanium implants were<br />
20 years ago. In the mandible,<br />
the osseointegration characteristics<br />
of the best titanium implants is far<br />
superior. But this can change.<br />
Joachim Maier<br />
BACKGROUND<br />
Joachim Maier is a master dental technician<br />
and a leading expert in high-quality<br />
dental replacement. His <strong>com</strong>pany, Oral<br />
Design Bodensee, works, among other<br />
materials, with high-performance ceramics.<br />
He predicts a bright future for these<br />
materials.<br />
STARGET 3 I 09 11
12 STARGET 3 I 09 ETKON_VISUAL 5.0<br />
The next generation Straumann CADCAM software<br />
New materials and design options<br />
The new version 5.0 of the etkon_visual software was one of the many<br />
highlights presented by Straumann at this year’s IDS. It implements a<br />
number of innovations that offer the user a broader range of materials and<br />
design options and greatly improve its user-friendliness, which produced<br />
great interest in visitors to the show.
Introduction of the new etkon_visual software version 5.0: impressions from IDS 2009.<br />
Software modules for Ivoclar IPS e.max ® CAD glass ceramic and for CAD construction<br />
of Straumann ® CADCAM abutments<br />
The additional modules, “Ivoclar IPS e.max ® CAD Glass Ceramic” (in cooperation with Ivoclar<br />
Vivadent AG) and “CAD Construction of Straumann ® CADCAM Abutments”, represent the<br />
most significant innovations in version 5.0 of the etkon_visual software. These two modules<br />
allow the user to carry out <strong>com</strong>puter-assisted virtual modeling and fabrication of both caps and<br />
fully anatomical crowns made of Ivoclar IPS e.max ® CAD glass ceramic and also individual<br />
ZrO 2 and titanium abutments.<br />
ETKON_VISUAL 5.0<br />
STARGET 3 I 09 13
14 STARGET 3 I 09 ETKON_VISUAL 5.0<br />
Straumann ® CADCAM Solutions<br />
Proven Straumann quality from<br />
implant to final restoration<br />
The <strong>com</strong>plete product range from<br />
implants through implant-supported<br />
CADCAM prostheses to conventional<br />
prosthetic CADCAM restorations<br />
with high-tech materials guarantees<br />
the quality-conscious customer a<br />
<strong>com</strong>plete system with coordinating<br />
<strong>com</strong>ponents. From the implant to the<br />
final prosthetic restoration, you can<br />
count on proven Straumann quality.<br />
1<br />
2<br />
3<br />
etkon es1 with etkon_visual 5.0<br />
Straumann CADCAM<br />
production center<br />
Left: Straumann ® CADCAM Abutment<br />
Right: IPS e.max ® CAD Restorations by<br />
Straumann ® CADCAM
IPS e.max ® CAD restorations from Straumann ®<br />
CADCAM: working esthetically with reliability<br />
With the addition of the “Ivoclar IPS e.max ® CAD Glass Ceramic” module, etkon_visual software<br />
version 5.0 provides the customer with access to a high-quality material for esthetic and at the same<br />
time economic solutions. The cooperation between Ivoclar Vivadent AG and Institut Straumann AG<br />
<strong>com</strong>bines years of experience in the field of dental ceramics with the benefits of Straumann’s prov-<br />
en CADCAM system and enables a unique range of materials and indications for highly esthetic<br />
results to be offered together with a high level of safety and efficiency. With Ivoclar IPS e.max ®<br />
CAD lithium disilicate glass ceramic for the Straumann ® CADCAM system, users will in future have<br />
the option of ordering translucent, fully anatomical crowns and veneered caps.<br />
Full control due to dynamic minimum wall thickness and flexible<br />
positioning of the retaining sprue<br />
Dynamic minimum wall thickness control makes etkon_visual software<br />
version 5.0 even safer and more user-friendly. Like the distance warning<br />
system in modern cars, the dynamic minimum wall thickness control signals<br />
to the user immediately and depending on the situation whether the minimum<br />
wall thickness falls below what is indicated. The parameters for this<br />
dynamic minimum wall thickness depend on the material, the tooth position,<br />
the indication (crown, caps) and the type of reduction.<br />
Diagram of the dynamic minimum<br />
wall thickness.<br />
Zone 1<br />
1.2 mm minimum wall thickness<br />
High quality with <strong>com</strong>plete<br />
cost control<br />
Dental technicians who are already<br />
using the Straumann ® CADCAM<br />
System are enabled to construct<br />
high-quality, fully anatomical<br />
Zone 2<br />
1.5 mm minimum wall thickness<br />
crowns and veneered caps without<br />
any additional investment. The<br />
centralized industrial fabrication<br />
guarantees the production quality<br />
of Straumann CADCAM GmbH.<br />
In addition, investments and costs<br />
for acquiring and maintaining<br />
ETKON_VISUAL 5.0<br />
Indication of when minimum wall thickness falls<br />
short with the areas in question marked in red.<br />
the production units are stored at<br />
Straumann. This guarantees the user<br />
<strong>com</strong>plete cost transparency while<br />
at the same time guaranteeing<br />
quality, thus strengthening the partnership<br />
with Straumann.<br />
STARGET 3 I 09 15<br />
Fully anatomical single<br />
crown made of Ivoclar<br />
IPS e.max ® CAD lithium<br />
disilicate glass ceramic.
16 STARGET 3 I 09 ETKON_VISUAL 5.0<br />
The CAD construction module for Straumann ®<br />
The new CADCAM abutment module allows the user to construct a customized abutment on<br />
the screen in a simple and efficient way. Manual steps for abutment modeling and wax-up are<br />
therefore not needed. Precision, simplicity and efficiency in designing the ZrO 2 and titanium<br />
abutments are the obvious advantages.<br />
Straumann ® Scanbody<br />
Precision is no accident: the new<br />
Straumann ® Scanbody<br />
The new Straumann ® Scanbody<br />
for the etkon es1 scanner functions<br />
as a digital impression post. The<br />
software thus defines the original<br />
position of the implant in the digital<br />
master model. This information is<br />
a fundamental requirement for all<br />
subsequent steps. Once it has been<br />
scanned, the software calculates an<br />
initial suggestion, depending on the<br />
situation, which can then be customized<br />
in a variety of ways.<br />
Software design<br />
The module for CAD construction<br />
of Straumann ® CADCAM abutments<br />
in version 5.0 of the etkon_<br />
visual software was developed<br />
so that the desired shape of the<br />
customized CADCAM abutment<br />
could be designed with a minimum<br />
of clicks in the great majority of<br />
cases, at the same time providing a<br />
variety of construction applications<br />
that enable the greatest possible<br />
design flexibility.
CADCAM abutments in etkon_visual 5.0:<br />
a customized abutment with just a few clicks<br />
Mesostructure or scaled-down<br />
tooth shape<br />
Construction of the emergence profile and object positioning<br />
The first step is to place the shoulder line manually on the sulcus and<br />
this can be moved freely in space on a faded-in auxiliary level (Fig. 1).<br />
Furthermore, the convexity of the subgingival region can be altered<br />
through “Object properties“ (Fig. 2). In this way, the gingiva can be<br />
supported according to the specific clinical situation.<br />
The module for CAD construction of<br />
Straumann ® CADCAM abutments<br />
offers the user a choice between a<br />
mesostructure and a scaled-down<br />
tooth shape. While the mesostructure<br />
is suitable for cemented restorations,<br />
ceramic abutments can be<br />
veneered directly by choosing the<br />
scaled-down tooth shape. 1 2<br />
Fig. 1:<br />
Construction of the emergence profile<br />
Finished ceramic<br />
mesostructure<br />
Finished scaled-down<br />
tooth shape<br />
ETKON_VISUAL 5.0<br />
Fig. 2:<br />
Designing the subgingival region<br />
Bridge abutments: uniform<br />
abutment axial alignment of<br />
the mesostructure in the bridge<br />
context<br />
If more than one CADCAM abutment<br />
is constructed at the same<br />
time, the software provides the user<br />
with the option of aligning their<br />
axes in a joint angle of insertion for<br />
a cemented bridge restoration.<br />
STARGET 3 I 09 17
18 STARGET 3 I 09 ETKON_VISUAL 5.0<br />
We invest, you profit<br />
Whether made of titanium or<br />
ceramic, the Straumann ® CAD-<br />
CAM abutments fabricated in<br />
the central production center are<br />
convincing in quality and precision.<br />
Straumann invests regularly in the<br />
technical infrastructure of modern<br />
production plant; together with the<br />
experience and professional <strong>com</strong>petence<br />
of the dental technician,<br />
optimal results can be achieved,<br />
with high patient satisfaction in consequence.<br />
Completed mesostructure<br />
in the master model<br />
Conclusion<br />
With the introduction of etkon_<br />
visual 5.0 Straumann provides a<br />
striking extension of the possibilities<br />
of the Straumann ® CADCAM<br />
System, making it simpler, more<br />
flexible and more efficient.<br />
Due to its high translucency<br />
and the broad range of shades<br />
(IPS e.max ® CAD, LT 20 shades,<br />
MO 5 shades), the integration of<br />
IPS e.max ® CAD glass ceramic<br />
provides the user with a variety of<br />
options in the restoration of esthetically<br />
demanding cases, with maximum<br />
economy at the same time.<br />
The newly developed CAD<br />
abutment module offers a high<br />
level of efficiency and flexibility.<br />
The software guides the user in a<br />
few steps to an individual result,<br />
while numerous tools allow customized<br />
adjustments to be made at<br />
any time.<br />
Various general improvements<br />
to the etkon_visual software – for<br />
instance, simple order placement<br />
– increase user-friendliness and<br />
increase the enjoyment of working<br />
with the Straumann ® CADCAM<br />
System.
20 STARGET 3 I 09 PRODUCTS<br />
<strong>NOW</strong><br />
AVAILABLE!<br />
1<br />
ART. NO.<br />
025.2205<br />
025.4205<br />
Make a strong impression<br />
New open tray impression posts for the Straumann ® Bone Level Implant<br />
Additional ease of use for impression-taking on Straumann ® Bone Level implants with the new impres-<br />
sion posts by way of long guide screw and improved retention and grip, designed to ensure precise<br />
restorations from the beginning.<br />
+7.5 mm<br />
PRODUCT NAME DIMENSION<br />
NC Impression Post Open Tray, long L 24.0 mm<br />
RC Impression Post Open Tray, long L 24.0 mm<br />
Your input matters<br />
The positive market feedback we<br />
have received since the global<br />
launch of the Straumann ® Bone<br />
Level portfolio confirms that users do<br />
not only appreciate the ease of use<br />
and flexibility of this new product<br />
line, but also value its <strong>com</strong>prehensiveness.<br />
To make good solutions<br />
better, we process ideas and inputs<br />
from our customers to steadily<br />
improve our product range.<br />
NEW<br />
Easy to remove guide screw<br />
Enhanced grip of guide handle<br />
Improved retention<br />
Featuring the unique<br />
CrossFit Connection<br />
Impression-taking made easier<br />
With the latest addition to the portfolio,<br />
impression taking on Straumann ®<br />
Bone Level implants will be even<br />
easier; the Straumann ® NC and<br />
RC Open Tray Impression posts<br />
<strong>com</strong>e with a long guide screw and<br />
improved retention and grip and are<br />
designed to ensure precision from<br />
the beginning of the restoration. As<br />
usual, the posts feature the unique<br />
CrossFit Connection.
Product availability<br />
2<br />
ART. NO.<br />
025.2202<br />
025.4202<br />
The new open tray impression posts<br />
are already available; the designadapted<br />
open tray impression posts<br />
(025.2202 and 025.4202) will<br />
be introduced in Q4 2009 in most<br />
markets. Get in touch with your local<br />
Straumann representative for more<br />
detailed information on product<br />
availability.<br />
+1.5 mm<br />
PRODUCT NAME DIMENSION<br />
NC Impression Post Open Tray, short L 16.5 mm<br />
RC Impression Post Open Tray, short L 16.5 mm<br />
For detailed handling instructions<br />
refer to our brochure “Straumann ®<br />
Bone Level Implant Line, Basic Information<br />
on the Prosthetic Procedures”<br />
(Art. no. 152.810).<br />
PRODUCTS<br />
ADAPTED<br />
Space-saving<br />
Enhanced grip of guide handle<br />
Improved retention<br />
Featuring the unique<br />
CrossFit Connection<br />
STARGET 3 I 09 21
22 STARGET 3 I 09 GUIDED SURGERY<br />
STRAUMANN AND IVS<br />
An integral solution for<br />
Guided Surgery<br />
Straumann expands its digital dentistry portfolio by acquiring the dental business of IVS Solutions AG,<br />
a provider of state-of-the-art software for <strong>com</strong>puter-based implant planning and surgical template fabri-<br />
cation. IVS products ideally <strong>com</strong>plement the Straumann ® Guided Surgery instrument kit.<br />
Top range software for guided<br />
surgery<br />
IVS Solutions AG, based in Chemnitz,<br />
Germany, develops solutions for<br />
<strong>com</strong>puter-based implant planning<br />
and for the fabrication of surgical<br />
templates. Besides its high-end<br />
technical solutions, IVS enjoys an<br />
outstanding market acceptance. The<br />
acquisition includes the full range of<br />
Fig. 1:<br />
Visualization of anatomical structures<br />
allows for accurate implant planning.<br />
IVS preoperative planning software<br />
products, the technology to fabricate<br />
templates accordingly as well as<br />
their world class software development<br />
team. On the other hand,<br />
Straumann adds clinical expertise<br />
to the software and planning<br />
know-how of IVS. This <strong>com</strong>bination<br />
provides a <strong>com</strong>plete solution out of<br />
one hand, creating benefits for both<br />
dental professionals and patients.<br />
Fig. 2:<br />
A user-friendly, simplified mode supports the<br />
planning of an implant through a step-by step<br />
approach.<br />
Computer guided surgery for<br />
prosthetically driven implant<br />
placement in <strong>com</strong>bination with<br />
<strong>com</strong>plex and esthetic cases<br />
Computer guided surgery is an<br />
emerging trend in implant dentistry.<br />
Based on a three- dimensional <strong>com</strong>puted<br />
tomogra<strong>ph</strong>ic image of the<br />
patient’s jaw, the dental surgeon<br />
plans the position, angulation and<br />
depth of the implant using so<strong>ph</strong>isticated<br />
planning software. Thus,<br />
implant placements can be based<br />
on the available bone situation<br />
to produce the desired prosthetic<br />
out<strong>com</strong>e. In a second step, the<br />
planning is transferred to a surgical<br />
template, the interface between the<br />
software-based planning and the<br />
surgery to be carried out with the<br />
Straumann ® Guided Surgery instrument<br />
kit.<br />
Stress-free surgery and increased<br />
predictability of surgical and prosthetic<br />
out<strong>com</strong>e are only two of the<br />
many benefits resulting from guided<br />
surgery.
Fig. 3:<br />
Maintaining the open system approach with<br />
respect to both software and hardware.<br />
Immediate <strong>com</strong>patibility and<br />
pursuing of the open-system<br />
approach<br />
The acquired technology is in line with<br />
the previously launched Straumann ®<br />
Guided Surgery instrument kit as<br />
IVS products were already a re<strong>com</strong>mended<br />
<strong>com</strong>plement to Straumann<br />
guided instruments before the acquisition.<br />
After successful planning,<br />
the IVS software provides a set of<br />
parameters for the production of the<br />
surgical template (on a local basis<br />
by the dental lab) and the protocol<br />
for the surgical procedures. The<br />
latter provides the dental surgeon<br />
with information on the appropriate<br />
Straumann instruments and ensures<br />
that the implant is placed exactly in<br />
the planned position.<br />
An open system<br />
Software<br />
IVS coDiagnostiX ®<br />
Open to all major implant<br />
systems<br />
Straumann ® Guided Surgery will<br />
remain an open system in the future.<br />
On the one hand, this means that<br />
Straumann instruments maintain their<br />
<strong>com</strong>patibility with other planning<br />
software systems and, on the other<br />
hand, that IVS software will still<br />
be <strong>com</strong>patible with other implant<br />
systems.<br />
Hardware<br />
Straumann ® Guided<br />
Surgery Instruments<br />
Compatible with various<br />
Guided Surgery planning software<br />
systems<br />
Perfect fit of the surgical<br />
template<br />
The scan template is reworked<br />
into the surgical template on<br />
a very robust and precise coordinate<br />
table (gonyX). Using the<br />
same template for CT scanning<br />
and surgery ensures a perfect<br />
fit of the surgical template on<br />
the remaining teeth or on any<br />
anchoring device such as temporary<br />
implants.<br />
Fig. 4:<br />
Visualization can also be used as a useful tool<br />
for patient <strong>com</strong>munication.<br />
Product availability<br />
The IVS software is currently<br />
available in Germany, Austria,<br />
Switzerland, the United States and<br />
Canada. It will be continuously<br />
adapted to the Straumann needs.<br />
Please contact your local Straumann<br />
distributor for information<br />
on product availability (addresses<br />
of Straumann branches can be<br />
found on page 55).<br />
Learn more about IVS on www.ivs-solutions.de<br />
GUIDED SURGERY<br />
STARGET 3 I 09 23<br />
Fig. 5:<br />
The IVS device allows<br />
for precise surgical<br />
template fabrication<br />
(gonyX).
24 STARGET 3 I 09 CLINICAL CASES<br />
1 L. Cordaro, Dieter D.<br />
Bosshardt, Piermario<br />
Palattella, Walter Rao,<br />
Giuseppe Serino, Matteo<br />
Chiapasco. Maxillary<br />
sinus grafting with<br />
Bio-Oss or Straumann ®<br />
Bone Ceramic: histomor<strong>ph</strong>ometric<br />
results from a<br />
randomized controlled<br />
multicenter clinical trial.<br />
Clin. Oral Impl. Res. 19,<br />
2008; 796–803.<br />
2 Z. Artzi, Miron<br />
Weinreb, Guy Carmeli,<br />
Rony Lev Dor, Michel<br />
Dard,Carlos E<br />
Nemcovsky. Histomor<strong>ph</strong>ometric<br />
assessment of<br />
bone formation in sinus<br />
augmentation utilizing<br />
a <strong>com</strong>bination of autogenous<br />
and hydroxyapatite/bi<strong>ph</strong>asic<br />
tricalcium<br />
<strong>ph</strong>os<strong>ph</strong>ate graft materials<br />
at 6 and 9 months in<br />
humans. Clin. Oral Impl.<br />
Res. 2008; 19: 686-692<br />
3 G.-G. K. Zafiropoulos,<br />
O. Hoffmann, A. Kasaj,<br />
B. Willershausen, O.<br />
Weiss, T. E. Van Dyke.<br />
Treatment of intrabony<br />
defects using guided<br />
tissue regeneration and<br />
autogenous spongiosa<br />
alone or <strong>com</strong>bined<br />
with hydroxyapatite/<br />
beta tricalcium <strong>ph</strong>os<strong>ph</strong>ate<br />
bone substitute or<br />
bovine-derived xenograft.<br />
Periodontol. 2007; 78:<br />
2216-2225<br />
A long-term esthetic result with<br />
Straumann ® BoneCeramic<br />
by Ass. Prof Dr Ronald Jung and Xavier Zahno, Master Dental Technician<br />
Straumann ® BoneCeramic is a fully synthetic bone graft sub-<br />
stitute, consisting of 60% hydroxyapatite and 40% tricalcium<br />
<strong>ph</strong>os<strong>ph</strong>ate in a homogeneous <strong>com</strong>posite (bi<strong>ph</strong>asic calcium<br />
<strong>ph</strong>os<strong>ph</strong>ate). The mor<strong>ph</strong>ology and <strong>com</strong>position of Straumann ®<br />
BoneCeramic allow it to be gradually replaced by the patient’s<br />
own bone. Straumann ® BoneCeramic was introduced to the mar-<br />
ket in 2004. Several clinical and preclinical studies have been<br />
published and/or presented to date, documenting the use of the<br />
material in the treatment of dehiscence type defects, intrabony<br />
defects and for sinus floor elevation, as well as for ridge dimen-<br />
sion preservation 1-8 .The following case describes the use of<br />
Straumann ® BoneCeramic in an esthetically demanding indica-<br />
tion, such as replacement of a central incisor.<br />
Figs. 1, 2:<br />
Pre-treatment clinical situation.<br />
1<br />
2<br />
Initial situation and<br />
pre-operative planning<br />
The 30-year old female patient presented<br />
a fracture of the tooth root<br />
of the central incisor in position 11<br />
as a result of trauma. On the buccal<br />
aspect a periodontal pocket<br />
of 11 mm was recorded including<br />
suppuration. In addition, the crown<br />
of tooth 21 revealed a fracture line<br />
within the ceramic crown (Figs. 1,<br />
2). The treatment plan required the<br />
replacement of the fractured tooth<br />
by a dental implant and a new<br />
crown in position 21.<br />
Figs. 3–5:<br />
Autogenous soft tissue graft sutured to the<br />
margins of the socket, following extraction of<br />
the incisor 11.<br />
3<br />
4<br />
5
Fig. 6:<br />
Buccal bone loss visible after<br />
flap elevation.<br />
6<br />
Figs. 7–9:<br />
Insertion of a Straumann ® TE Implant in the<br />
socket of the former incisor and coverage by<br />
a healing cap.<br />
7<br />
8<br />
9<br />
Treatment<br />
As a first step the incisor 11 was<br />
gently extracted revealing a partially<br />
missing buccal bone plate.<br />
In order to support the tissues, a<br />
socket preservation technique was<br />
used including the application of<br />
an autogenous soft tissue graft<br />
harvested with a punch from the<br />
palate (technique according to<br />
Jung et al. 2004). The punch was<br />
carefully sutured to the margins of<br />
the socket to increase the keratinized<br />
tissue and eventually facilitate<br />
a submerged type of healing<br />
procedure (Figs. 3–5). Six weeks<br />
later, the mucosa was <strong>com</strong>pletely<br />
healed and the implant placement<br />
procedure could be carried out. A<br />
mucoperiosteal flap was elevated<br />
with one distal vertical relieving incision.<br />
The papilla was kept intact.<br />
Following flap elevation, a certain<br />
degree of buccal bone loss was<br />
visible (Fig. 6). The remaining graft<br />
material which helped to maintain<br />
the outer contour was removed.<br />
The implant bed was prepared in<br />
the socket of the former incisor.<br />
A Straumann ® TE Implant was<br />
inserted (Ø 4.1/4.8mm, 12mm<br />
SLActive) and closed by a healing<br />
cap (Figs. 7–9). As the patient<br />
required either an autogenous<br />
bone graft or a synthetic bone substitute<br />
material the implant surface<br />
was first covered with autogenous<br />
bone chips harvested from the<br />
neighboring area and <strong>com</strong>plemented<br />
with Straumann ® BoneCeramic<br />
(particle size 500–1000 microns)<br />
to increase the buccal bone volume<br />
10<br />
11<br />
CLINICAL CASES<br />
Fig. 10:<br />
Bone augmentation with Straumann ®<br />
BoneCeramic.<br />
Fig. 11:<br />
Membrane fixed by absorbable pins.<br />
Figs. 12, 13:<br />
Healed mucosa following suture removal.<br />
12<br />
13<br />
STARGET 3 I 09 25<br />
4 S. J. Froum, S. S. Wallace,<br />
S.C. Cho, N. Elian,<br />
D. P. Tarnow. Histomor<strong>ph</strong>ometric<br />
<strong>com</strong>parison of<br />
a bi<strong>ph</strong>asic bone ceramic<br />
to anorganic bovine bone<br />
for sinus augmentation:<br />
6- to 8-month postsurgical<br />
assessment of vital bone<br />
formation. A pilot study. Int.<br />
J. Periodontics Restorative<br />
Dent. 2008; 28: 273-281<br />
5 Schwarz F., M. Herten,<br />
D. Ferrari, M. Wieland,<br />
L. Schmitz, E. Engelhardt,<br />
J. Becker. Guided bone<br />
regeneration at dehiscence-type<br />
defects using<br />
a hydroxylapatite/beta<br />
tricalcium <strong>ph</strong>os<strong>ph</strong>ate<br />
(BoneCeramic) or a<br />
collagen-coated natural<br />
bone mineral (BioOss ®<br />
Collagen). An immunohistochemical<br />
study in dogs. Int.<br />
J. of Oral & Maxillofacial<br />
Surgery 2007; 36:1198-<br />
1206<br />
6 Jensen SS, Yeo A, Dard<br />
M, Hunziker E, Schenk<br />
R, Buser. Evaluation of a<br />
novel bi<strong>ph</strong>asic calcium<br />
<strong>ph</strong>os<strong>ph</strong>ate in standardized<br />
bone defect. A histologic<br />
and histomor<strong>ph</strong>ometric<br />
study in the mandibles of<br />
minipigs. Clin. Oral Impl.<br />
Res. 2007; 18: 752-760<br />
7 Mardas N. et al. Socket<br />
preservation with synthetic<br />
bone substitute or a bovine<br />
xenograft. Poster, IADR<br />
2008<br />
8 van Assche N. et al.<br />
BoneCeramic as alternative<br />
for BioOss ® in the treatment<br />
of bony dehiscencies<br />
along implants. Oral<br />
presentation, EAO 2007.<br />
Poster, EAO 2008
26 STARGET 3 I 09 CLINICAL CASES<br />
Figs. 14–16:<br />
Augmentation of gingival tissue by means<br />
of connective tissue, harvested from the<br />
palatal region.<br />
14<br />
15<br />
16<br />
(Fig. 10). The grafted site was covered<br />
by an absorbable collagen<br />
membrane tacked with absorbable<br />
pins (Fig. 11). Following the augmentation<br />
procedure, the flap was<br />
mobilized and care was taken to<br />
ensure tension-free wound closure.<br />
Ten days later the mucosa looked<br />
healthy and the sutures could be<br />
removed (Figs. 12, 13).<br />
With the aim of ensuring an optimal<br />
esthetic out<strong>com</strong>e, the gingival tissue<br />
was augmented by means of connective<br />
tissue harvested from the<br />
palatal region (Figs. 14–16).<br />
One month later, the healing cap<br />
was exposed by using a U-shaped<br />
incision. The impression for the<br />
provisional restoration was taken<br />
by means of a polyether material.<br />
Subsequently, a screw-retained<br />
provisional was positioned in order<br />
to shape the soft tissue and to<br />
allow the formation of a correct<br />
emergence profile (Figs. 17, 18).<br />
Figure 19 shows the provisional<br />
crown in situ.<br />
A customized ceramic abutment<br />
was designed. The shape of the<br />
abutment was checked in the<br />
patient’s mouth (Fig. 20) and the<br />
final restoration was performed<br />
(Fig. 21). On the X-ray, a wellintegrated<br />
implant and stable periimplant<br />
bone contours were visible<br />
(Fig. 22).<br />
Figures 23–25 show the final<br />
restoration, 3 years after implant<br />
placement.<br />
Figs. 17, 18:<br />
Soft tissue conditioning and contouring prior<br />
to the placement of the provisional crown.<br />
17<br />
18<br />
Fig. 19:<br />
Provisional crown in situ.<br />
19<br />
Fig. 20:<br />
Customized ceramic abutment.<br />
20<br />
Fig. 21:<br />
Final restoration.<br />
21
Fig. 22:<br />
Well integrated implant and stable<br />
bone contours.<br />
22<br />
Figs. 23, 24:<br />
Follow-up, 3 years after implant placement.<br />
23<br />
24<br />
25<br />
Out<strong>com</strong>e<br />
Three years after implantation, the<br />
patient displayed a healthy mucosa,<br />
a perfectly preserved alveolar<br />
ridge contour and a very satisfying<br />
esthetic result overall.<br />
Conclusion<br />
The use of Straumann ® Bone-<br />
Ceramic in the demanding case<br />
described here involving the<br />
replacement of one of the upper<br />
central incisors with an implant<br />
allowed successful restoration of<br />
esthetics and function.<br />
Fig. 25:<br />
3 years follow-up X-ray.<br />
Ass. Prof Dr med. dent.<br />
Ronald E. Jung<br />
www.dent.uzh.ch<br />
ronald.jung@zzmk.uzh.ch<br />
CLINICAL CASES<br />
Scientific Department Head at the<br />
University of Zürich<br />
Vice Chairman at the Department of<br />
Fixed and Removable Prosthodontics<br />
and Dental Material Sciences, Center<br />
for Dental and Oral Medicine,<br />
University of Zürich, Switzerland<br />
Visiting Associate Professor at the Department<br />
of Periodontics, Health Science<br />
Center, University of Texas, San Antonio/<br />
USA<br />
Xavier Zahno<br />
www.dent.uzh.ch<br />
xavier.zahno@zzmk.uzh.ch<br />
Chief Dental Technician at the Department<br />
of Fixed and Removable Prosthodontics<br />
and Dental Material Sciences,<br />
Center for Dental and Oral Medicine,<br />
University of Zürich, Switzerland<br />
STARGET 3 I 09 27
28 STARGET 3 I 09 CLINICAL CASES<br />
Initial situation<br />
Esthetic restoration of a Straumann ®<br />
RC Bone Level Implant with a CADCAM<br />
ceramic abutment<br />
by Raymond Dubs, Dental Technician and Dr med. dent. Rudolf Auer<br />
1 2 3<br />
Fig. 1:<br />
Model with gingival mask ready<br />
for modeling.<br />
The middle-aged patient had lost tooth 21 following an accident. On examination, the<br />
anterior maxillary area was caries-free. The patient and dentist opted for implantation of<br />
a Straumann ® RC Bone Level Implant (Ø 4.1mm, SLActive).<br />
Fig. 2:<br />
Diagnostic modeling in wax of tooth 21.<br />
Procedure<br />
After the implant healing <strong>ph</strong>ase, the<br />
dentist took an impression with a<br />
custom open tray. This was sent to<br />
the dental laboratory, where a precise<br />
master model with removable<br />
gingival mask was made (Fig. 1).<br />
Since the gap was about 1.5 mm<br />
narrower than the homologous<br />
tooth, a wax-up was made first in<br />
order to examine the situation for<br />
the final restoration (Fig. 2).<br />
Fig. 3:<br />
Pliable silicone index, labial.<br />
The wax-up showed a satisfactory<br />
situation so that an index could<br />
now be made from the labial side<br />
with pliable silicone (Fig. 3).<br />
A RC wax-up sleeve was placed<br />
in the master model analog and<br />
the shape of the mesostructure was<br />
modeled with Scan wax (etkon<br />
CopyCad) (Fig. 4). The dimension<br />
of the waxed-up abutment was<br />
checked with the index made previously<br />
of pliable silicone (Fig. 5).
Fig. 4:<br />
Wax modeling on wax-up sleeve,<br />
labial view.<br />
4 5 6<br />
Fig. 7:<br />
Finished CADCAM zirconia abutment from<br />
labial aspect.<br />
The abutment modeled from wax<br />
was then positioned in the RC<br />
wax-up sleeve holder and this was<br />
placed in scan cylinder no. 7 of the<br />
etkon es1 scanner (Fig. 6).<br />
After the modeled abutment was<br />
scanned by the etkon es 1 scanner,<br />
the design could be adjusted and<br />
optimized through various operating<br />
elements in the etkon_visual<br />
software. With a little experience,<br />
the scanning and processing takes<br />
only a few moments. The digital<br />
dataset of the customized abutment<br />
is then sent to the Straumann<br />
CADCAM production center via<br />
an Internet connection.<br />
Fig. 5:<br />
Wax modeling on wax-up sleeve with index,<br />
labial view.<br />
Fig. 8:<br />
Finished CADCAM zirconia abutment from<br />
palatal aspect.<br />
7 8 9<br />
After a few working days, the<br />
CADCAM ceramic abutment fabricated<br />
in the Straumann production<br />
center is sent to the laboratory by<br />
post or directly by courier. It is there<br />
checked again for precise fit on<br />
the model before it is sent to the<br />
dentist for try-in (Figs. 7, 8).<br />
Together with the CADCAM<br />
ceramic abutment, the dentist was<br />
supplied with an insertion aid made<br />
in the laboratory. The insertion aid<br />
is supported on the neighboring<br />
teeth and allows correct and simple<br />
positioning of the ceramic abutment<br />
in the implant (Figs. 9, 10).<br />
CLINICAL CASES<br />
Fig. 6:<br />
Wax modeling on the wax-up sleeve holder<br />
in scan cylinder no. 7, ready for scanning.<br />
Fig. 9:<br />
Placement aid for the dentist.<br />
At this point it is important to check<br />
the abutment with regard to support<br />
of the gingiva and the final<br />
crown margin. After the try-in at the<br />
dentist’s, the CADCAM ceramic<br />
abutment was sent back to the<br />
dental laboratory where the final<br />
restoration was made. To do this,<br />
the CADCAM ceramic abutment is<br />
positioned in the es1 scanner and<br />
scanned. A CADCAM cap made<br />
of zerion ® is then constructed in<br />
etkon_visual software. This is done<br />
without any wax-up. The zerion ®<br />
cap can be designed with simple<br />
operating elements exclusively on<br />
the screen. After finalizing the cap,<br />
it is ordered from the Straumann<br />
CADCAM milling center via the<br />
STARGET 3 I 09 29
30 STARGET 3 I 09 CLINICAL CASES<br />
Fig. 10:<br />
CADCAM abutment in situ.<br />
10 11<br />
Fig. 12:<br />
Veneered zerion ® cap on CADCAM<br />
zirconia abutment in situ.<br />
12 13<br />
etkon_visual software. The cap is<br />
sent within a few working days to<br />
the laboratory by post or courier<br />
from central Straumann CADCAM<br />
production.<br />
The zerion ® cap is now veneered<br />
in the laboratory using the standard<br />
method. This is where the talents of<br />
the dental technician are needed<br />
as knowledge, experience and<br />
good observational ability are<br />
important requirements for successful<br />
ceramic work (Fig. 11).<br />
Fig. 11:<br />
Finalized zerion ® crown on the model.<br />
Fig. 13:<br />
Final restoration.<br />
Final restoration and conclusion<br />
The finalized veneered zerion ® cap<br />
was then sent to the dentist, who<br />
carried out the final implant restoration.<br />
The patient was provided with a<br />
<strong>com</strong>pletely natural-looking and<br />
high-quality single tooth restoration<br />
using a Straumann ® Bone Level<br />
Implant and CADCAM-fabricated<br />
ceramic prosthesis (Figs. 12, 13).<br />
Raymond Dubs<br />
Dental Technician<br />
Own dental laboratory in Kloten/<br />
Switzerland, specializing in all-ceramic<br />
and zirconium oxide restorations, implant<br />
restorations and CADCAM prosthetics<br />
ITI member<br />
Dr med. dent. Rudolf Auer<br />
dr.auer@zam-sh.ch<br />
Practice in Schaffhausen/Switzerland<br />
Member of SGI, SSOS, ZPGS, SSP<br />
ITI member<br />
Special interests: oral surgery,<br />
prosthetic reconstructions
32 STARGET 3 I 09 EVENTS<br />
© Photos: Monaco Press Centre<br />
PREVIEW<br />
“Guidelines for the practitioner”<br />
18 th Annual Scientific Meeting of the European Association<br />
for Osseointegration (EAO)<br />
30 September to 3 October 2009 at the Grimaldi Forum in Monaco<br />
With great excitement the European Association for Osseointegration (EAO) is looking forward to its<br />
18 th Annual Scientific Congress. The scientific <strong>com</strong>mittee has produced a fascinating program focusing<br />
on the guidelines for practitioners as derived from the best scientific and clinical evidence.<br />
Straumann Satellite Symposium<br />
Straumann, as one of the EAO<br />
Founding Gold Sponsors, will host<br />
the satellite symposium “Advanced<br />
solutions – reliable, precise, esthetic”<br />
on October 1 at 11:00 a.m.<br />
In addition to a first class group<br />
of European speakers who will<br />
present the latest results of preclinical<br />
and clinical research on<br />
Straumann’s advanced solutions,<br />
one of the top health care and<br />
practice management consultants<br />
from the United States will present<br />
how to increase patient acceptance<br />
of implants.
Monaco<br />
Situated in the heart of Mediterranean<br />
Europe, the Principality<br />
of Monaco is an exquisite emerald<br />
in a setting of craggy rocks<br />
rising from the azure-blue Mediterranean<br />
Sea, basks between<br />
enchanting French Medieval<br />
villages and the ski trails of the<br />
Alps. Its surface area is limited<br />
to 2 square kilometers, lying<br />
in a narrow coastal strip. The<br />
Principality has only one land,<br />
Monaco, whose limits are the<br />
same as those of the state.<br />
Monaco has a colorful and fascinating<br />
history filled with Princes<br />
and even a movie star. Prince<br />
Rainier III ascended to the<br />
throne in 1949 and later caught<br />
the world’s attention with his<br />
storybook marriage to actress<br />
Grace Kelly. Today, Monaco<br />
Updates by e-mail<br />
If you would like to receive updated<br />
information on the Straumann<br />
Symposium and any other of our<br />
activities during the EAO Monaco,<br />
please send us an e-mail with your<br />
name and address at events@<br />
OVERVIEW<br />
Date:<br />
Time:<br />
Venue:<br />
Title:<br />
Speakers:<br />
Languages:<br />
still stands as a proud monarchy<br />
with their son, H.S.H. Prince<br />
Albert II as its head of state.<br />
With over 300 days of sunshine<br />
a year and mild temperatures,<br />
one of the loveliest times to<br />
be in Monaco is early autumn<br />
with average temperatures still<br />
around 20 °C. It celebrates with<br />
passion the arts, culture, restoration<br />
of mind and body, and<br />
high-adrenaline activities like<br />
the Formula One Grand Prix,<br />
casino gaming, land and water<br />
sports and exciting nightlife.<br />
Official tourism information site:<br />
www.visitmonaco.<strong>com</strong><br />
<strong>straumann</strong>.<strong>com</strong>. Registration for the<br />
EAO Congress and hotel bookings<br />
can be made though the official<br />
website www.eao.org. It is highly<br />
re<strong>com</strong>mended to register early, not<br />
only to benefit from substantially<br />
reduced fees, but also to secure<br />
EVENTS<br />
your admission as both the congress<br />
and hotels are expected to<br />
be sold out in no time.<br />
STRAUMANN SATELLITE SYMPOSIUM<br />
Thursday, October 1, 2009<br />
11:00 a.m. to 1:00 p.m.<br />
Salle des Princes, Grimaldi Forum (same as EAO)<br />
Advanced solutions – reliable, precise, esthetic<br />
Luca Cordaro, Italy<br />
Bilal Al-Nawas, Germany<br />
Ronald Jung, Switzerland<br />
Javier Fábrega, Spain<br />
David Schwab, USA<br />
English – simultaneous translation available in French and Italian<br />
STARGET 3 I 09 33
34 STARGET 3 I 09 EVENTS<br />
Luca Cordaro, MD, DDS, PhD<br />
Currently Head of the Department of Periodontology<br />
and Prosthodontics at the Eastman<br />
Dental Hospital in Rome. Graduate<br />
of the University of Rome “La Sapienza”.<br />
Post-graduate degree in dentistry and oral<br />
surgery. Author and co-author of several<br />
papers published in Italian and international<br />
journals and renowned lecturer at<br />
national and international congresses in<br />
Europe and the Americas. Winner of the<br />
H. Goldman Prize of the Italian Society<br />
of Periodontology (2007). Professional<br />
interests: Periodontology, Implantology<br />
and Oral surgery with special focus on the<br />
reconstructive treament of alveolar atro<strong>ph</strong>ies.<br />
Education Delegate of the Italian<br />
Section of ITI and serving in the Education<br />
Core Group of the ITI.<br />
Esthetic and flexible – predictable results with<br />
Straumann ® Bone Level Implants of the Straumann ®<br />
Dental Implant System<br />
Luca Cordaro, Rome/Italy<br />
The Straumann ® Bone Level Implant line has been part of the Straumann ®<br />
Dental Implant System for 2 years now. It brings additional esthetics and<br />
flexibility into dental treatment procedures. With a prosthetic perspective<br />
focusing on the importance of pre-planning, a step-by-step case will demonstrate<br />
how these concepts can be translated into clinical practice to ensure<br />
the best esthetic (soft tissue) out<strong>com</strong>es. Results of pre-clinical and clinical<br />
studies demonstrate not only the success and reliability of this implant line<br />
but also its versatility. Straumann SLActive ® , with its very high success rates<br />
and superior osseointegration, continues to be the gold standard in surface<br />
technology and provides the surgeon with confidence when treating high<br />
risk and demanding cases.<br />
Bilal Al-Nawas, Ass. Prof Dr Dr<br />
Chief of the Oromaxillofacial Surgery<br />
Department, Mainz University Hospital.<br />
Studied medicine and dentistry in Frankfurt,<br />
Saarbrücken and Zürich. Doctorate<br />
in medicine and dentistry. Additional<br />
qualification in plastic surgery. Specialist<br />
in oromaxillofacial surgery. ITI fellow.<br />
Special research and professional interests:<br />
implant dentistry, infection diseases,<br />
hard tissue, clinical trials (GCP).<br />
Small diameter implants –<br />
where advanced materials<br />
make a difference<br />
Bilal Al-Nawas, Mainz/Germany<br />
Small diameter implants are especially<br />
beneficial in cases of narrow<br />
bone ridges. Due to their reduced<br />
dimensions bone grafting procedures<br />
might be avoided. But narrow<br />
implants are as well susceptible to<br />
<strong>com</strong>plication due to their reduced<br />
strength or reduced osseointegrated<br />
surface. In order to achieve a wider<br />
use of narrow diameter implants a<br />
new material has been developed.<br />
The new material <strong>com</strong>bines high<br />
strength and outstanding osseointegration.<br />
The newest out<strong>com</strong>es of various<br />
pre-clinical and clinical studies<br />
show very promising results. Cases<br />
will show the use of these narrow<br />
implants in the daily practice.
Ronald Jung, Ass. Prof Dr<br />
Currently Vice Chairman of the Department<br />
of Fixed & Removable Prosthodontics<br />
and Dental Material Sciences at the<br />
University of Zurich in Switzerland (Chairman:<br />
Prof Dr Ch Hämmerle). Trained in<br />
oral surgery, prosthodontics and implant<br />
therapy. Visiting Associate Professor at<br />
the Department of Periodontics at the<br />
University of Texas Heath Science Center<br />
at San Antonio, USA (Chairman: Prof Dr<br />
D. Cochran) in 2006. Ac<strong>com</strong>plished and<br />
internationally renowned lecturer and<br />
researcher, best known for his work in the<br />
field of hard and soft tissue management<br />
in implant dentistry and his research on<br />
new technologies for tissue regeneration.<br />
Guided bone regeneration –<br />
innovation continues<br />
Ronald Jung, Zurich/Switzerland<br />
Guided bone regeneration using<br />
barrier membranes is a well documented<br />
and established procedure<br />
to augment bone in conjunction<br />
with dental implant surgery. The<br />
availability of a synthetic and<br />
absorbable membrane that can be<br />
customized intra-operatively for an<br />
individual defect represents a potential<br />
improvement for future GBR<br />
procedures. Different experimental<br />
and clinical studies have evaluated<br />
a newly developed synthetic hydrogel<br />
for use in bone regeneration<br />
therapy. The studies demonstrated<br />
that the hydrogel is a highly effective<br />
barrier membrane for bone<br />
regeneration and that the in situ<br />
formed material can simplify clinical<br />
handling.<br />
Javier G. Fábrega, MD, DDS<br />
Certificate in Prosthodontics from the<br />
University of Southern California. Assistant<br />
Clinical Professor at the Department of<br />
Restorative Dentistry at the University of<br />
Southern California (1993). Assistant Clinical<br />
Professor at the Department of Graduate<br />
Periodontics and the Post-Graduate<br />
Program in Esthetic Dentistry (since 1994)<br />
at the University of Madrid. Education<br />
delegate of the Iberian section of the ITI<br />
(since 2004). Private practice limited to<br />
restorative dentistry in Madrid/Spain.<br />
Highly esthetic tooth<br />
restoration – advanced<br />
ceramic technology in<br />
clinical practice<br />
Javier G. Fábrega, Madrid/Spain<br />
The new generation of all-ceramic<br />
solutions provides an excellent<br />
foundation for restorations that are<br />
virtually indistinguishable from natural<br />
teeth. The latest ceramic abutments<br />
can be pre-shaded and anatomically<br />
formed or even fully customized<br />
with CADCAM technology.<br />
They can offer multiple advantages,<br />
including enhanced esthetics, greater<br />
efficiency and more predictability<br />
for a natural-looking tooth base.<br />
The use of lithium disilicate ceramic<br />
materials can furthermore provide<br />
a <strong>com</strong>bination of choice for highly<br />
esthetic out<strong>com</strong>es in the final restoration.<br />
Advantages and limitations of<br />
each all-ceramic restorative option<br />
will be discussed and an attempt to<br />
identify possible indications will be<br />
made through the presentation of<br />
challenging clinical situations.<br />
David Schwab, PhD<br />
EVENTS<br />
Internationally known seminar speaker<br />
and practice management consultant<br />
working extensively with dental professionals.<br />
Former Director of Marketing<br />
for the American Dental Association and<br />
as Executive Director of the American<br />
College of Prosthodontists. Own marketing<br />
consulting firm, David Schwab &<br />
Associates, Inc. The <strong>com</strong>pany provides<br />
in-office seminars and other practice<br />
management services for fee-for-service<br />
dentists in the U.S. and Canada. Author<br />
of practice management and marketing<br />
articles which have appeared in numerous<br />
publications, including the Journal of<br />
the American Dental Association, Dental<br />
Economics, the Journal of the Canadian<br />
Dental Association, and the Seattle<br />
Study Club Journal.<br />
How to increase patient<br />
acceptance of implants<br />
David Schwab, Orlando/USA<br />
There can be no implant cases<br />
without patient acceptance. It is<br />
imperative, therefore, that patients<br />
be educated in a way that allows<br />
them to understand and accept<br />
implant treatment and allow clinicians<br />
to help them improve their<br />
lives with dental implants. This presentation<br />
will address topics that will<br />
assist the clinician in <strong>com</strong>municating<br />
about dental implants with their<br />
patients.<br />
STARGET 3 I 09 35
36 STARGET 3 I 09 EVENTS<br />
PREVIEW<br />
FDI Annual World Dental Congress 2009<br />
September 1–5 in Singapore at the Suntec Singapore<br />
International Convention & Exhibition Centre<br />
Singapore<br />
Singapore is known as the crossroads of the world and is made up of not just one<br />
island but a main island with 63 surrounding islets. It is a city full of life, rich in diversity<br />
and business. It operates the busiest port in the world. Overflowing with energy, this<br />
little island embodies the finest of both Eastern and Western worlds. Singapore was a<br />
wonderful host city to the FDI congress in 1990 and the FDI is once again looking<br />
forward to the warm and forth<strong>com</strong>ing wel<strong>com</strong>e the city offers.<br />
In September 2009, over 10,000 dental and industry professionals from around the world are<br />
expected to arrive in Singapore for the FDI Annual World Dental Congress. The FDI’s Annual World<br />
Dental Congress is one of the world’s leading dental events and the prime meeting point for leaders<br />
and key individuals of the dental profession and industry. The FDI consists of 191 member associa-<br />
tions from 136 countries representing more than 1,000,000 dentists.<br />
Straumann is one of the corporate sponsors of the FDI Congress and will be present in the exhibition<br />
(Booth #s O 01–O 04). Come visit the booth to learn more about the latest innovations offered.
Limited Attendance Course and Lecture in Scientific Program<br />
sponsored by Straumann<br />
Limited Attendance Course<br />
James Ruskin, Dean Morton: “Sinus Lift Implant Surgery”<br />
This presentation is designed to provide<br />
the experienced surgeon with a<br />
<strong>com</strong>prehensive overview of grafting<br />
procedures and surgical techniques<br />
as they relate to implant placement<br />
in the area of the maxillary sinus.<br />
Current clinical and scientific trends,<br />
diagnosis and treatment planning<br />
considerations as well as anatomical<br />
factors and anomalies will be<br />
Lecture in Scientific Programme<br />
James Ruskin, Dean Morton:<br />
Implantology – The State of the Art<br />
Evidence-based success has resulted<br />
in increasing utilization of dental<br />
implants in the treatment of all<br />
forms of edentulism. This program<br />
will em<strong>ph</strong>asize <strong>com</strong>munication between<br />
treatment ‘TEAM’ members<br />
and the effect of <strong>com</strong>munication on<br />
treatment out<strong>com</strong>es. Diagnosis and<br />
planning procedures utilizing the<br />
SAC (Straight-forward-Advanced-<br />
Complex) and ERA (Esthetic Risk<br />
Assessment) patient classification<br />
OVERVIEW<br />
Dates:<br />
Venue:<br />
Exhibition hours:<br />
Conference hours:<br />
Registration fees:<br />
Information & registration:<br />
presented.. Specific procedures<br />
discussed will include lateral window<br />
sinus approach (Caldwell-Luc),<br />
lateral window sinus grafting with<br />
simultaneous implant placement<br />
and osteotome sinus lift (Summers<br />
approach) with and without immediate<br />
implant placement.<br />
Tuesday September 1,<br />
09.00am–11.30am<br />
systems will be highlighted. The<br />
use of technology in diagnosis and<br />
planning for individuals with advanced<br />
and <strong>com</strong>plex needs as well as<br />
advances in implant surface technology<br />
to optimize patient out<strong>com</strong>es<br />
will be central to this education<br />
program.<br />
Wednesday September 2,<br />
09.00am–1.30 am and<br />
02.00pm–04.30pm<br />
Dean Morton<br />
September 1–5, 2009<br />
Suntec Singapore, International Convention & Exhibition Centre<br />
Wednesday through Friday: 09.00 am–06.00 pm<br />
Saturday: 09.00am–02.00 pm<br />
Refer to program for details<br />
Dentist (member) € 440<br />
Dentist (non-member) € 550<br />
Hygienist/Technician € 135<br />
Auxilliary/Office personnel € 135<br />
Dental Student € 135<br />
EVENTS<br />
BDS, MS, FICD, FACP, is a Professor<br />
and Assistant Dean for Implant and<br />
Aesthetic Dentistry at the University of<br />
Louisville, USA. He has served as Director<br />
of Advanced Education in Prosthodontics,<br />
and Director of the Center for<br />
Implant Dentistry at the University of<br />
Florida. Dr Morton is widely published<br />
and maintains a practice limited to<br />
Implant Dentistry and Prosthodontics.<br />
James D. Ruskin<br />
DMD, MD, FACS, is a Professor in the<br />
Department of Oral and Maxillofacial<br />
Surgery at the University Of Florida<br />
College Of Dentistry. He is a Fellow of<br />
the American College of Surgeons, the<br />
International College of Dentists and the<br />
American College of Dentists. Dr Ruskin<br />
is a Diplomate of the American Board<br />
of Oral and Maxillofacial Surgery, a<br />
member of the ITI Education Core Group<br />
and the Forum Implantologicum Editorial<br />
Board.<br />
For more information about this congress and to register, please visit the<br />
official website at www.fdiworldental.org<br />
STARGET 3 I 09 37
38 STARGET 3 I 09 EVENTS<br />
REVIEW<br />
Straumann Solutions @ IDS 2009<br />
With over 106,000 visitors, the 33 rd International Dental Show 2009 in Cologne celebrated a new<br />
record. On its 450 square meter stand, Straumann presented innovations in the CADCAM area<br />
and Guided Implant Surgery from March 24 to 28 and announced its new partnership with Ivoclar<br />
Vivadent and its takeover of the Dental business area of IVS Solutions AG.<br />
The modern, bright and open-plan<br />
stand in the entrance area of hall<br />
4.2 wel<strong>com</strong>ed visitors with the central<br />
topic of ”Straumann Solutions“.<br />
Three different segments of the<br />
stand invited visitors to get better<br />
acquainted with the broad product<br />
portfolio of the Swiss med-tech<br />
<strong>com</strong>pany – in the Product Experience<br />
Zone it was even possible to<br />
test some of the newest products<br />
directly on the spot.<br />
Partnership with Ivoclar Vivadent<br />
On the eve of the opening of the<br />
fair, Straumann announced its new<br />
partnership with Ivoclar Vivadent.<br />
IPS e.max ® , the high-performance<br />
ceramic of the <strong>com</strong>pany from<br />
Schaan, will be used in future for<br />
dental prosthetic solutions for both<br />
implant- and tooth-based restorations.<br />
From the first day of the show,<br />
visitors were able to look closely at<br />
the first joint product – Straumann ®<br />
Anatomic IPS e.max ® Abutment.<br />
The abutment, made of high-quality<br />
and durable zirconium oxide is<br />
available in two shades, two gingival<br />
heights and two configurations<br />
(straight and angled), thus providing<br />
a flexible “ready-to-use“ solution<br />
that can be modified easily by both<br />
dentists and dental technicians.<br />
The new abutment will be available<br />
in Europe from April and in North<br />
America from July. In the course<br />
of the year, the IPS e.max ® lithium<br />
disilicate ceramic will be available<br />
in Europe for prosthetics with<br />
Straumann ® CADCAM (etkon).<br />
This is a high-performance material<br />
that <strong>com</strong>bines strength with translucency<br />
and the possibility of shading<br />
– key hallmarks for restorations<br />
that cannot be distinguished from<br />
natural teeth.
New etkon CADCAM software<br />
In both the CADCAM Zone and in<br />
the Product Experience Zone Straumann<br />
provided an insight into a further<br />
update of its high-performance<br />
etkon CADCAM software, which<br />
is designed to make the work of<br />
the dental technician easier than<br />
ever. The newest version, etkon<br />
visual 5.0, is downloaded automatically<br />
and offers a number of new<br />
functions. For instance, the tooth<br />
library that was added last year<br />
is now supplemented by an occlusal<br />
surface database with which<br />
the dental technician can adapt<br />
the prosthetic construction to the<br />
patient’s bite (full crowns or crown<br />
frameworks for veneering). This<br />
is particularly important for the<br />
IPS e.max ® ceramic and enables<br />
Straumann to be the first <strong>com</strong>pany<br />
to offer this material via a centralized<br />
milling service.<br />
At the 15 CADCAM terminals on<br />
the stand, an additional function for<br />
designing the undercut of bridges<br />
was presented, which supplements<br />
the existing crown undercut function.<br />
The other new functions also<br />
include the new ”Scanbody“ 1 ,<br />
which fully digitalizes the CAD-<br />
CAM process of abutment construction<br />
for all Straumann implant<br />
platforms. These extensions, <strong>com</strong>bined<br />
with the speed, precision,<br />
<strong>com</strong>fortable operation and practical<br />
design of the laser scanner,<br />
position the Straumann CADCAM<br />
package as the solution of choice<br />
for dental laboratories.<br />
Guided implant surgery –<br />
Straumann takes over IVS<br />
On the second day of the show,<br />
Straumann announced that it had<br />
signed an agreement to take over<br />
the Dental business area of IVS<br />
Next IDS: 22–26 March 2011 in Cologne.<br />
More information on the IDS at www.ids-cologne.de<br />
EVENTS<br />
Solutions AG. The <strong>com</strong>pany, with<br />
headquarters in Chemnitz, Germany,<br />
develops and sells proprietary<br />
software applications for <strong>com</strong>puterguided<br />
implant surgery and for<br />
designing and producing surgical<br />
drilling templates. The takeover<br />
includes the entire range of IVS<br />
software products for preoperative<br />
planning along with the top-class<br />
software development team. It<br />
therefore strengthens the potential<br />
and technical knowledge of Straumann’s<br />
own software development,<br />
which has hitherto concentrated<br />
on restorative CADCAM dentistry.<br />
Straumann expects to introduce IVS<br />
systems this year.<br />
The <strong>com</strong>bined use of three-dimensional<br />
imaging technology and<br />
<strong>com</strong>puters for planning and implementing<br />
precise implant insertion is<br />
a pioneering trend in dental implantology.<br />
With the aid of <strong>com</strong>puted<br />
STARGET 3 I 09 39<br />
1 CE registration procedure<br />
is in course.
40 STARGET 3 I 09 EVENTS<br />
2 Fatigue tests according<br />
to ASTM ISO 14801<br />
3 Gottlow J. Preclinical<br />
data presented at the<br />
23 rd annual conference<br />
of the Academy of<br />
Osseointegration (AO),<br />
Boston, February 2008,<br />
and at the 17 th annual<br />
scientific conference of<br />
the European Association<br />
for Osseointegration<br />
(EAO), Warsaw, September<br />
2008.<br />
tomogra<strong>ph</strong>ic scans of the patient’s<br />
jaw, the clinician plans the position,<br />
angulation and depth of the implant<br />
on a <strong>com</strong>puter with special software.<br />
The design is transferred to a<br />
plastic template, which the surgeon<br />
uses as a guide for drilling, profile<br />
drilling and thread tapping. Computer-guided<br />
surgery based on modern<br />
CT scanning methods offers the<br />
dentist a clear image of the bone<br />
condition and final implant position,<br />
in addition to simplifying the planning<br />
and performance of <strong>com</strong>plex<br />
procedures. In this way, it also<br />
reduces the risk of surgical and<br />
prosthetic <strong>com</strong>plications.<br />
New surgical kit for <strong>com</strong>puterguided<br />
implant placement<br />
The new products presented by<br />
Straumann in Cologne also include<br />
a <strong>com</strong>prehensive instrument kit for<br />
guided implant surgery. The kit,<br />
developed and produced with<br />
proven Straumann precision, contains<br />
all the instruments, drills, profile<br />
drills and taps that are needed for<br />
placing Straumann implants with the<br />
aid of drilling templates; these templates<br />
are currently produced with<br />
open (non-exclusive) 3D software<br />
systems, including IVS, Materialise,<br />
med3D, iDent and siCAT. Like other<br />
Straumann products, the storage<br />
cases and all the items in the kit are<br />
color-coded for easier handling.<br />
Naturally, the kit follows the proven<br />
Straumann method and was tested<br />
clinically.<br />
Product Experience Zone –<br />
Straumann ® Roxolid<br />
In the Product Experience Zone<br />
interested visitors were able to test<br />
the drilling templates planned with<br />
IVS software in conjunction with the<br />
new surgical kit on special mandible<br />
models. The bending strength<br />
of Roxolid, the innovative highperformance<br />
material from Straumann,<br />
which is much more stable<br />
than titanium 2 , could also be tested<br />
there. Initial preclinical tests have<br />
4 Fraunhofer-Institut für<br />
Nachrichtentechnik,<br />
Heinrich-Hertz-Institut, Berlin<br />
5 Quintessenz Verlags-<br />
GmbH, Berlin<br />
shown that the new material might<br />
be better integrated in the bone<br />
than titanium 3 . The <strong>com</strong>bination of<br />
material strength and improved<br />
osseointegration allows patient<br />
safety and predictability to be<br />
increased. Because of its improved<br />
stability, Roxolid paves the way<br />
to implants with a smaller diameter,<br />
which will be helpful in situations<br />
where space is limited, for instance<br />
in the anterior region. Thinner<br />
implants might also be valuable in<br />
situations where the bone is too thin<br />
to accept a conventional implant<br />
without additional bone augmentation.<br />
In the final analysis, Roxolid<br />
might offer substantial cost savings<br />
and simplified procedures.<br />
Straumann Lounge<br />
In the Straumann Lounge intensive<br />
professional discussions could take<br />
place. A multimedia expert presented<br />
the Straumann implant system<br />
on a big plasma screen in a playful<br />
way with the „iPoint Presenter“ 4 and<br />
the „Digital Explorer“ 5 .<br />
As a souvenir, visitors to the<br />
Straumann stand were given a<br />
farewell gift of a trendy bag made<br />
of truck plans and safety belts in a<br />
reduced black and white design.<br />
Over 8,000 of these bags became<br />
the new <strong>com</strong>panion of Straumann<br />
customers and prospective customers<br />
over the five days of the show.
REVIEW<br />
A New Wave in Implant Therapy<br />
The Annual Meeting of the Academy of Osseointegration is an important date on the calendar for implant<br />
surgeons, periodontists, prosthodontists and general dentists around the world, and also has large sections<br />
of the program devoted to the interests of dental hygienists and dental laboratory technicians. This year the<br />
meeting was held in San Diego, CA, USA, and Straumann was again one of the main corporate sponsors<br />
of the meeting. In addition to the Corporate Forum, Straumann sponsored the badge lanyards and electronic<br />
lead retrieval cards, and co-sponsored the President’s VIP Dinner.<br />
Optimal Esthetics with High Predictability and Low Risk<br />
for Complications<br />
Prof Dr Daniel Buser, University of Bern/Switzerland<br />
Prof Dr Urs Belser, University of Geneva/Switzerland<br />
Prof Daniel Buser (University of<br />
Bern, Switzerland) and Prof Urs<br />
Belser (University of Geneva, Switzerland),<br />
over three sessions in the<br />
corporate forum, discussed how to<br />
achieve optimal, predictable esthetics<br />
without an increased risk for<br />
<strong>com</strong>plications.<br />
The first of the three sessions was<br />
on treatment planning and risk<br />
assessment, particularly what is<br />
important for an esthetic out<strong>com</strong>e<br />
and challenges in implant therapy in<br />
the esthetic zone. Important factors<br />
for a good esthetic out<strong>com</strong>e are<br />
a harmonious gingival line, intact<br />
papillae, convex buccal contour of<br />
keratinized mucosa and harmonious<br />
volume and shape of the crown.<br />
The placement of implants postextraction<br />
has increased dramatically<br />
in the last 10 years, and the<br />
majority of patients are aged 40<br />
or over. 1 This means that many of<br />
them have <strong>com</strong>promised adjacent<br />
dentition and/or bone and soft<br />
Prof Dr Urs Belser,<br />
University of Geneva/<br />
Switzerland<br />
EVENTS<br />
Straumann Corporate Forum at the Annual Meeting of the Academy of Osseointegration<br />
in San Diego, California<br />
Prof Dr Daniel Buser,<br />
University of Bern/<br />
Switzerland<br />
STARGET 3 I 09 41<br />
Ass. Prof Dr Frank Schwarz,<br />
Heinrich-Heine University,<br />
Düsseldorf/Germany<br />
1 Bornstein MM, Halbritter<br />
S, Harnisch H, Weber<br />
HP, Buser D. A retrospective<br />
analysis of patients<br />
referred for implant<br />
placement to a specialty<br />
clinic: indications, surgical<br />
procedures, and<br />
early failures. Int J Oral<br />
Maxillofac Implants<br />
2008;23:1109-1116.
42 STARGET 3 I 09 EVENTS<br />
tissue dehiscences. Esthetic <strong>com</strong>plications<br />
are difficult to deal with<br />
and the potential for correction of<br />
problems is small; <strong>com</strong>plications<br />
should therefore be prevented as<br />
much as possible. These <strong>com</strong>promised<br />
clinical situations therefore<br />
require systematic treatment planning.<br />
Advances in the understanding<br />
of the underlying tissue biology<br />
have highlighted the necessity of<br />
detailed esthetic risk management<br />
and correct 3-D implant positioning,<br />
In the second session, Profs Buser<br />
and Belser focused on esthetic<br />
single-tooth replacement. Most studies<br />
do not assess esthetic parameters,<br />
but the pink esthetic score<br />
(PES) and the white esthetic score<br />
(WES) have both recently been<br />
introduced. These have been used<br />
together in a recent retrospective<br />
study assessing maxillary singletooth<br />
replacement, where successful<br />
and predictable results were<br />
shown. 2<br />
THE GOALS OF IMPLANT THERAPY ARE SUCCESSFUL TREATMENT OUTCOMES<br />
WITH HIGH PREDICTABILITY AND LOW RISK OF COMPLICATIONS. SECONDARY<br />
GOALS ARE TO REDUCE SURGICAL PROCEDURES, MORBIDITY AND HEALING<br />
TIMES FOR THE PATIENT.<br />
2 Belser UC, Grütter L,<br />
Vailati F, Bornstein MM,<br />
Weber HP, Buser D. Out<strong>com</strong>e<br />
evaluation of early<br />
placed maxillary anterior<br />
single-tooth implants<br />
using objective esthetic<br />
criteria: a cross-sectional,<br />
retrospective study in 45<br />
patients with a 2- to4year<br />
follow-up using<br />
pink and white esthetic<br />
scores. J Periodontol<br />
2009;80:140-151.<br />
3 Buser D, Halbritter S,<br />
Hart C, Bornstein MM,<br />
Grütter L, Chappuis V,<br />
Belser UC. Early implant<br />
placement with simultaneous<br />
guided bone regeneration<br />
following singletooth<br />
extraction in the<br />
esthetic zone: 12-month<br />
results of a prospective<br />
study with 20 consecutive<br />
patients. J Periodontol<br />
2009;80:152-162.<br />
and this has been aided by implant<br />
designs, CADCAM and effective<br />
risk assessment procedures, such as<br />
that outlined in Volume 1 of the ITI<br />
Treatment Guide, where various risk<br />
factors are categorized and tabulated,<br />
and can be easily assessed.<br />
The goals of implant therapy are<br />
successful treatment out<strong>com</strong>es with<br />
high predictability and low risk of<br />
<strong>com</strong>plications. Secondary goals<br />
are to reduce surgical procedures,<br />
morbidity and healing times for the<br />
patient, but these should not <strong>com</strong>promise<br />
the primary objectives. The<br />
treatment approach should therefore<br />
be conservative, using only<br />
materials and procedures that have<br />
good scientific documentation, to<br />
keep the risk of <strong>com</strong>plications low.<br />
Straumann’s Bone Level Implant is<br />
a new development designed to<br />
make esthetic out<strong>com</strong>es easier. It<br />
incorporates platform switching, a<br />
new connection (CrossFit) and a<br />
wide range of prosthetic <strong>com</strong>ponents.<br />
Clinical procedures are similar<br />
to those for tissue level implants,<br />
and the surgical instruments are<br />
the same. Immediate placement<br />
in the esthetic zone may carry<br />
an increased risk for facial bone<br />
resorption and subsequent soft tissue<br />
recession, so early placement<br />
is the treatment of choice. Several<br />
cases using Straumann ® Bone Level<br />
Implant treatment were presented,<br />
outlining the prosthodontic elements<br />
and the CrossFit connection.<br />
Straumann ® Bone Level Implants<br />
Weitere Informationen finden Sie auf der offiziellen<br />
IDS-Website: www.ids-cologne.de<br />
were used in a study of early<br />
implant placement following single<br />
tooth extraction in the esthetic zone<br />
in 20 patients. 3 Successful tissue<br />
integration was observed with all<br />
implants at 12 months, with maintenance<br />
of the keratinized mucosa<br />
and good to excellent esthetics.<br />
Mean bone loss was 0.18mm,<br />
and there were no implant failures.<br />
Esthetic sites with multiple missing<br />
adjacent teeth were discussed in<br />
the third session of the Corporate<br />
Forum. This is probably the most<br />
challenging situation for a clinician<br />
to produce a good esthetic<br />
out<strong>com</strong>e, and some of the challenges<br />
were illustrated through a<br />
number of clinical cases. Placement<br />
of adjacent implants should be<br />
avoided, since the loss of vertical<br />
bone height in such cases is well<br />
documented, 4 but other options<br />
are possible with good treatment<br />
planning, depending on the situation.<br />
Adjacent Straumann ® Bone<br />
Level Implants may be a promising<br />
option in certain situations, but<br />
further documentation is required<br />
before this can be re<strong>com</strong>mended.
The Impact of Surface Technologies and Bone<br />
Regeneration on Osseointegration<br />
Ass. Prof Dr Frank Schwarz, University Düsseldorf/Germany<br />
Dr Frank Schwarz (Heinrich-Heine<br />
University, Düsseldorf, Germany)<br />
explained that many patients requiring<br />
implant present with <strong>com</strong>promised<br />
dentition and defects at the<br />
proposed implant sites. Titanium<br />
implant surface modifications may<br />
enhance bone healing through altered<br />
surface chemistry, e.g. hydro<strong>ph</strong>ilicity,<br />
which increases the surface free<br />
energy. Preclinical data with the<br />
SLActive ® surface have demonstrated<br />
enhanced early osseointegration,<br />
with strong surface responses by<br />
blood and osteogenic cells. For<br />
example, rapid woven bone formation,<br />
with highly mineralized bone<br />
covering the defect at the SLActive ®<br />
implant surface, <strong>com</strong>pared to only<br />
connective tissue with SLA ® , was<br />
observed in a preclinical dehiscence<br />
study, 5 and similar results were<br />
observed in a dehiscence study<br />
using submerged or non-submerged<br />
SLA ® and SLActive ® implants. 6<br />
Other implant surface modifications<br />
have been developed, and<br />
one of these, Nanotite, has been<br />
evaluated in a preclinical study in<br />
dehiscence defects versus SLActive ® .<br />
In this study, new woven bone<br />
formation approaching the implant<br />
shoulder was observed at the<br />
defect sites with SLActive ® implants,<br />
whereas only minimal new bone<br />
formation was observed at the<br />
sites with Nanotite implants; the<br />
differences were significant at both<br />
4 and 8 weeks. Another clinical<br />
pilot study using Straumann ® Bone<br />
Level Implants with the SLActive ®<br />
surface in <strong>com</strong>bination with a PEG<br />
membrane showed the formation<br />
of newly formed bone tissue in 3<br />
months, with almost <strong>com</strong>plete filling<br />
of the defect.<br />
Dr Schwarz reiterated that treatment<br />
concepts should be conservative<br />
when trying to change estab-<br />
lished, predictable procedures,<br />
and that the clinical reality is often<br />
very different to the experimental<br />
situation. However, implant surface<br />
modifications such as hydro<strong>ph</strong>ilicity<br />
and growth factors may have the<br />
potential to support bone regeneration<br />
at deficient implant sites,<br />
although experimental data should<br />
always be interpreted as proof of<br />
principle rather than treatment suggestions.<br />
ANOTHER CLINICAL PILOT STUDY USING STRAUMANN ® BONE LEVEL IMPLANTS WITH THE<br />
SLACTIVE SURFACE IN COMBINATION WITH A PEG MEMBRANE SHOWED THE FORMATION<br />
OF NEWLY FORMED BONE TISSUE IN 3 MONTHS, WITH ALMOST COMPLETE FILLING OF<br />
EVENTS<br />
STARGET 3 I 09 43<br />
THE DEFECT. 4 Tarnow DP, Cho SC,<br />
Wallace SS. The effect of<br />
inter-implant distance on<br />
the height of inter-implant<br />
bone crest. J Periodontol<br />
2000;71:546-549.<br />
5 Schwarz F, Herten M,<br />
Sager M, Wieland M, Dard<br />
M, Becker J. Bone regeneration<br />
in dehiscence-type<br />
defects at chemically modified<br />
(SLActive) and conventional<br />
SLA titanium implants:<br />
a pilot study in dogs. J Clin<br />
Periodontol 2007;34:78-86.<br />
6 Schwarz F, Sager M, Ferrari<br />
D, Herten M, Wieland M,<br />
Becker J. bone regeneration<br />
in dehiscence-type defects<br />
at non-submerged and submerged<br />
chemically modified<br />
(SLActive) and conventional<br />
SLA titanium implants: an<br />
immunohistochemical study<br />
in dogs. J Clin Periodontol<br />
2008;35:64-75.<br />
The lectures given at the AO can be viewed here as audio presentations<br />
with original sound: www.<strong>straumann</strong>.us/ao2009.
44 STARGET 3 I 09 EVENTS<br />
PREVIEW<br />
American Academy of Periodontology<br />
95 th Annual Meeting<br />
12–15 September 2009 in Boston, Massachusetts/USA<br />
at the Convention & Exhibition Center<br />
Straumann Corporate Forum<br />
Saturday, September 12<br />
13:00–16:45<br />
Boston Convention & Exhibition Center<br />
Straumann will participate as a major sponsor at the AAP and in<br />
addition, host a corporate forum during which time updated infor-<br />
mation will be provided on current and forth<strong>com</strong>ing products in the<br />
<strong>com</strong>pany’s portfolio. We are pleased to provide an overview of the<br />
speakers and their planned presentations. Clinicians who wish to<br />
attend the Straumann Corporate Forum need only to register for the<br />
AAP Meeting – access to the Forums are included.<br />
For further information and to view the AAP Preliminary Program,<br />
please visit the official AAP website at www.perio.org.<br />
Robert Jaffin, DMD<br />
Graduate of the University of Pennsylvania.<br />
Certificate in Periodontics from<br />
Columbia University. Diplomate of the<br />
American Board of Periodontology.<br />
Fellow of the Academy of Osseointegration.<br />
Section Chief of Periodontics at<br />
Hackensack University Medical Center.<br />
ITI Fellow of the ITI. Lecturer and international<br />
author.<br />
Achieving Predictability<br />
through Simplicity in Implant<br />
Treatment<br />
This lecture will focus on clinical and<br />
practical application of implant therapy<br />
that leads to simplicity of treatment<br />
and predictable long term results.<br />
Dr. Jaffin will address how to achieve<br />
optimal clinical and esthetic out<strong>com</strong>es<br />
through implant selection, surface technology,<br />
and loading protocol.
Hans-Peter Weber, DMD<br />
Chair, Department of Restorative Dentistry<br />
and Biomaterials Sciences, Harvard<br />
School of Dental Medicine, Boston, MA.<br />
Raymond J. and Elva Pomfret Nagle<br />
Professor of Restorative Dentistry at Harvard<br />
School of Dental Medicine. Dental<br />
Degree from the School of Dental Medicine,<br />
University of Berne (Switzerland).<br />
Certificates in Removable Prosthodontics<br />
and Periodontics, <strong>com</strong>bined with Fixed<br />
Prosthodontics. Awarded with the Swiss<br />
Board Certification as a Periodontist<br />
(1986). Visiting Assistant Professor in the<br />
Department of Periodontics at the University<br />
of Texas Health Science Center at<br />
San Antonio. DMD degree at the Harvard<br />
School of Dental Medicine (1990).<br />
Active member of several professional<br />
organizations, including the International<br />
Team for the Promotion of Oral Implantology<br />
(I.T.I.). Current work: Research and<br />
teaching, as well as intramural practice<br />
in all <strong>ph</strong>ases of implant dentistry and<br />
related disciplines. Author of numerous<br />
articles in the areas of periodontics and<br />
implant dentistry. Lecturer at national and<br />
international events. Associate Editor of<br />
Clinical Oral Implants Research.<br />
Roxolid: biological and<br />
clinical potential of a stronger<br />
implant<br />
A new material has been developed<br />
to address the challenge of fulfilling<br />
the requirement to <strong>com</strong>bine greater<br />
implant strength and un<strong>com</strong>promised<br />
bio<strong>com</strong>patibility. Indications, treatment<br />
steps, and clinical studies of smaller<br />
diameter implants made of this new<br />
material will be presented.<br />
Will Martin, DMD, MS<br />
Clinical Associate Professor in the Departments<br />
of Oral and Maxillofacial Surgery<br />
and Prosthodontics at the University of<br />
Florida’s College of Dentistry. DMD with<br />
honors from the University of Florida and<br />
Completion of MS and Certificate in<br />
Prosthodontics from Baylor College of<br />
Dentistry. Joined the faculty at the University<br />
of Florida in 1999 and serves as the<br />
Clinical Director of the Center for Implant<br />
Dentistry. Diplomate of the American<br />
Board of Prosthodontics. Fellow of the<br />
American College of Prosthodontists, International<br />
College of Dentists, International<br />
Team for Implantology (ITI) and member<br />
of numerous professional organizations<br />
including the Academy of Osseointegration,<br />
ADA and FDA. Research interests<br />
include implant design, loading protocols,<br />
and implant biomechanics. Practice limited<br />
to Prosthodontics within the Center for<br />
Implant Dentistry. Lecturer at national and<br />
international events on esthetic and implant<br />
dentistry.<br />
Indications, Planning and<br />
Restorative Techniques Utilizing<br />
the Bone Level Implant<br />
– Early Results from a Multi-<br />
Center Clinical Trial<br />
This presentation will introduce current<br />
treatment modalities and review<br />
implant designs that influence the planning<br />
and treatment of anterior cases.<br />
One-year result of a prospective<br />
clinical trial of Straumann ® Bone Level<br />
Implant will be reviewed. Restorative<br />
techniques enhancing esthetic out<strong>com</strong>es<br />
through utilization of CAD-<br />
CAM technology will be highlighted.<br />
Michael K. McGuire, DDS<br />
Graduate of Baylor University. DDS and<br />
Certificate of Periodontics from Emory<br />
University School of Dentistry. Full time<br />
private practice limited to periodontics in<br />
Houston, Texas. Clinical Assistant Professor<br />
of Periodontics at both the University<br />
of Texas Dental Branch at Houston and<br />
the University of Texas Health Science<br />
Center at San Antonio. Diplomate of the<br />
American Board of Periodontology and<br />
past president of the American Academy<br />
of Periodontology. Participation in clinical<br />
research and publication of many papers<br />
in prestigious journals as well as contribution<br />
of chapters to textbooks. Awarded<br />
1997 by the American Academy of<br />
Periodontology with the Clinical Research<br />
Award recognizing a series of his papers<br />
as the most clinically relevant periodontal<br />
research published that year. Serves<br />
on the editorial board of the Journal of<br />
Periodontology, the International Journal<br />
of Oral and Maxillofacial Implants, and<br />
the International Journal of Periodontics<br />
and Restorative Dentistry. Member of the<br />
American Dental Association’s Council on<br />
Scientific Affairs. Many continuing education<br />
programs throughout the United States<br />
and abroad.<br />
Treatment of Recession<br />
Defects with Coronally<br />
Advanced Flaps and<br />
Emdogain<br />
EVENTS<br />
This presentation will provide evidence<br />
on the effectiveness of coronally<br />
advanced flaps with the use of<br />
Straumann ® Emdogain in the treatment<br />
of recession defects. This clinicallyoriented<br />
lecture will blend diagnostic<br />
guidelines and step-by-step techniques<br />
to provide a well-rounded understanding<br />
regarding this treatment option and<br />
when it is indicated.<br />
STARGET 3 I 09 45
46 STARGET 3 I 09 EVENTS<br />
REVIEWS FROM THE MIDDLE EAST<br />
AEEDC Congress in Dubai<br />
Dubai 10–12 March at the Dubai International<br />
Convention & Exhibition Center<br />
The 13 th Annual UAE Dental Conference<br />
and Arab Dental Exhibition<br />
(AEEDC) was a successful meeting<br />
drawing over 6,000 professional<br />
conference delegates and over<br />
20,000 trade visitors from 113<br />
countries. H. H. Sheikh Hamdan<br />
Bin Rashid Al Maktoum, Deputy<br />
Ruler of Dubai, Minister of Finance<br />
and President of the Dubai Health<br />
Authority inaugurated the congress<br />
on the morning of the first day,<br />
March 10.<br />
The exhibition included 700<br />
<strong>com</strong>panies from 65 countries.<br />
Straumann recently launched the<br />
Straumann ® Bone Level Implant<br />
in the Middle East region, which<br />
made AEEDC an ideal congress to<br />
showcase this new addition to the<br />
Straumann ® Dental Implant System.<br />
As an appreciation for the support<br />
of customers from all over the<br />
Region, Straumann hosted a gala<br />
dinner at Jumeirah Beach Resort<br />
with the famous Burj Al Arab as the<br />
backdrop to the already beautiful<br />
evening.
ITI Esthetic Master Course at the University<br />
of Sharjah, United Arab Emirates<br />
13–14 March at the University of Sharjah<br />
Following immediately after the<br />
AEEDC, Straumann organized the<br />
first ITI Esthetic Master Course at<br />
the University of Sharjah (UAE),<br />
with Prof Dean Morton from Louisville<br />
University (USA) and Prof<br />
William Martin from Florida University<br />
(USA). The <strong>com</strong>pletely booked<br />
course covered state-of-the-art techniques<br />
in the treatment of high-end<br />
esthetic implant cases.<br />
Besides receiving high level theoretical<br />
lectures based on the ITI<br />
consensus and treatment planning<br />
approach through clinical guidelines<br />
and cases from Dr Martin‘s<br />
and Dr Morton‘s remarkable experience,<br />
the 30 participants had the<br />
opportunity to exercise these often<br />
advanced techniques during clinically<br />
based practical sessions. Procedures<br />
such as making provisional<br />
restorations, surgical templates for<br />
esthetic-driven procedures and<br />
EVENTS<br />
customizing impression transfers for<br />
post mucosa forming impression<br />
taking were performed.<br />
We are most grateful to the University<br />
of Sharjah for the opportunity<br />
for providing us with the necessary<br />
premises and support to carry out<br />
this course.<br />
STARGET 3 I 09 47
48 STARGET 3 I 09 EVENTS<br />
7.2009–8.2010<br />
Worldwide<br />
Key Dental Events Calendar<br />
LAND<br />
COUNTRY MEETING DATES FULL MEETING NAME SHORT NAME CITY WEBSITE<br />
Argentina Nov. 4–7, 2009 Associacion Odontologica Argentina AOA Buenos Aires www.aoa.org.ar<br />
Argentina Aug. 4–7, 2010 Expodent Expodent Buenos Aires www.expodent.<strong>com</strong>.ar<br />
Australia Aug. 20–22, 2009 New Zealand Dental Association NZDA Wellington www.nzda.org.nz<br />
Australia Nov. 4–7, 2009 Australasian Osseointegration Society AOS Broadbeach - www.aosconference.<strong>com</strong>.au<br />
7 th Biennial Conference Gold Coast<br />
Austria Oct. 1–3, 2009 Österreichischer Zahnärztekongress ÖZÄK Innsbruck www.zaek-innsbruck2009.at<br />
Belgium Oct. 24, 2009 Conférence International de CIDAE Brussels www.cidae.be<br />
Dentisterie Adhésive et Esthétique<br />
Brazil Sept. 3–5, 2009 Congresso Internacional Comemorativo – 20 Anos São Paulo www.implantnews.<strong>com</strong>.br/<br />
20 Anos de Osseointegração Osseointegração 20anos<br />
Brazil Jan. 30– Congresso Internacional de CIOSP São Paulo www.ciosp.<strong>com</strong>.br<br />
Feb. 3, 2010 Odontologia São Paulo<br />
Canada Oct. 12–17, 2009 Canadian Association of Oral and CAOMS Toronto www.caoms.<strong>com</strong><br />
Maxillofacial Surgeons Annual Meeting<br />
Canada March 3–6, 2010 Joint meeting of the American and AADR, CADR Washington, www.iadr.org<br />
Canadian Association for Dental Research DC (USA)<br />
Canada April 15–17, 2010 Pacific Dental Conference PDC Vancouver www.pdconf.<strong>com</strong>/cms2010<br />
Canada May 13–15, 2010 Ontario Dental Association ODA Toronto www.youroralhealth.ca<br />
Annual Meeting<br />
Canada May 27–30, 2010 Canadian Academy of Periodontology CAP Vancouver www.cap-acp.ca<br />
Annual Meeting<br />
Canada May 29– Journee Dentaires Internationales JDIQ Montreal www.ordredesdentistesdu<br />
June 1, 2010 du Quebec quebec.qc.ca<br />
China Oct. 28–31, 2009 13 th China International Exhibition & DenTech Shanghai www.dentech.<strong>com</strong>.cn<br />
Symposium on Dental Equipment,<br />
Technology & Products<br />
China March 29– Dental South China Dental South Guangzhou www.dentalexpo.cn<br />
April 1, 2010 China<br />
Denmark Sept. 24–25, 2009 Dental Fair Dental Fair Vejle www.dentalfair.dk<br />
Denmark April 15–17, 2010 Scandinavian Dental Fair Scandefa Copenhagen www.scandefa.dk<br />
Finland Aug. 27–29, 2009 Scandinavian Society for Prosthetic SSPD Naantali www.congress.utu.fi/<br />
Dentistry sspd2009
COUNTRY<br />
MEETING DATES FULL MEETING NAME<br />
EVENTS<br />
SHORT NAME CITY WEBSITE<br />
Finland Nov. 12–14, 2009 Finnish Dental Congress and Exhibition Odontologi Helsinki www.apollonia.fi<br />
France Nov. 24–28, 2009 Association Dentaire Française ADF Paris www.adfcongres.<strong>com</strong><br />
Germany July 11, 2009 Symposium Young ITI Young ITI Munich contact:<br />
„Dentale Implantologie – was bleibt, info.de@<strong>straumann</strong>.<strong>com</strong><br />
was geht, was kommt?“<br />
Germany Sept. 10–12, 2009 44 th Meeting of the Continental European IADR-CED Munich www.ced2009.org<br />
Division of the International Association<br />
for Dental Research<br />
Germany Nov. 5–7, 2009 Deutscher Zahnärztetag ZÄ-Tag Munich www.dgzmk.de<br />
Hungary Oct. 15–17, 2009 Dentalworld Dentalworld Budapest www.dentalworld.hu<br />
Israel Feb. 3–4, 2010 The Annual Meeting of the Israel Perio Tel Aviv www.perio.org.il<br />
Periodontal and Osseintegration Society<br />
Italy Oct. 9–10, 2009 XIX Congresso Internazionale della SICOI Milano www.sicoi.it<br />
Società Italiana di chirurgia Orale ed<br />
Implantologia<br />
Italy Nov. 13–14, 2009 XXII Giornate milanesi di Implantologia. Cenacolo Milano www.cenacolo.org<br />
I° Congresso di video chirurgia. Milanese<br />
Italy Nov. 28, 2009 Corso di aggiornamento. SIO Padova www.osteointegrazione.it<br />
L‘ausilio del <strong>com</strong>puter in implantoprotesi:<br />
dal software diagnostico al cad-cam<br />
Japan Sept. 25–27, 2009 Japanese Society of Oral Implantology JSOI Osaka www.jsoi.org<br />
Japan Oct. 9–11, 2009 Japanese Society of Oral and JSOMS Sapporo www.jsoms.or.jp<br />
Maxillofacial Surgeons<br />
Korea Oct. 31– The Korean Academy of Prosthodontics KAP Seoul www.kap.or.kr<br />
Nov. 1, 2009<br />
Lithuania Sept. 25–27, 2009 1 st Baltic Sea Conference in BSCOSO Vilnius www.orthognathicsurgery.<br />
Orthognathic Surgery and Orthodontics info/conference<br />
Malaysia Nov. 5–8, 2009 13 th International Congress of Oral ICOI Kuala Lumpur www.13icoi-apscongress<br />
Implantologists - Asia Pacific Section 2009.<strong>com</strong><br />
Mexico Sept. 24–26, 2009 VI Congreso Nacional E Internacional AMIB Guadalajara Jal. www.amibdental.<strong>com</strong><br />
De Implantología Bucal<br />
Mexico Oct. 29–31, 2009 Congreso Nacional E Internacional ADM Mexico City www.adm.org.mx<br />
De La ADM<br />
STARGET 3 I 09 49
50 STARGET 3 I 09 EVENTS<br />
LAND<br />
COUNTRY<br />
MEETING DATES FULL MEETING NAME<br />
SHORT NAME CITY WEBSITE<br />
Monaco Sept. 30– 18 th Annual Scientific Meeting of the EAO Monaco www.eao.org<br />
Oct. 3, 2009 European Association for Osseointegration<br />
Netherlands Sept. 25, 2009 ITI Congres der Lage Landen ITI Deurne www.iticongres2009.nl<br />
Netherlands Nov. 5–6, 2009 53 rd NVMKA congres NVMKA Utrecht www.nvmka.nl<br />
Philippines Sept. 23–27, 2009 Philippine Dental Association PDA Convention Manila www.pda.<strong>ph</strong><br />
Annual Convention<br />
Portugal Oct. 9–11, 2009 5 th European Federation of Oral EFOSS Oporto www.socportco.<strong>com</strong><br />
Surgery Societies<br />
Portugal Oct. 17–18, 2009 28 th Congresso da Sociedade Portuguesa SPMED Coimbra www.spemd.pt<br />
de Estomatologia e Medicina Dentária<br />
Portugal Nov. 20–22, 2009 17 th Congresso da Ordem dos OMD Oporto www.omd.pt<br />
Médicos Dentistas<br />
Singapore Sept. 1–5, 2009 Annual Congress of the FDI World FDI Singapore www.fdiworldental.org<br />
Dental Federation<br />
Singapore April 16–18, 2010 IDEM Singapore IDEM Singapore www.idem-singapore.<strong>com</strong><br />
South Africa Sept. 10–13, 2009 13 th Meeting of the International ICP Cape Town www.icp-org.<strong>com</strong><br />
College of Prosthodontists<br />
Spain Sept. 17–19, 2009 7 th Congreso Anual de la Sociedad SECIB Almería www.secibonline.<strong>com</strong><br />
Española de Cirugía Bucal<br />
Spain Oct. 9–11, 2009 39 th Reunión de la Sociedad Española SEPES Barcelona www.sepes.org<br />
de Prótesis Estomatológica<br />
Spain Nov. 12–14, 2009 43 th Reunión Española de la Sociedad SEPA Las Palmas www.sepa.es<br />
Española de Periodoncia y Osteintegración<br />
Spain July 14–17, 2010 88 th General Session & Exhibition IADR Barcelona www.iadr.org<br />
of the International Association for<br />
Dental Research<br />
Sweden Sept. 2–4, 2009 Annual Meeting of the Swedish KKF Visby www.kkf.nu<br />
Association of Oral and Maxillofacial<br />
Surgeons (KKFs årsmöte)<br />
Sweden Sept. 9–11, 2009 Annual Meeting of the Swedish Society SFOP Halmstad www.sfop.se<br />
for Prosthodontics (Tylösandsdagarna)
COUNTRY<br />
MEETING DATES FULL MEETING NAME<br />
EVENTS<br />
SHORT NAME CITY WEBSITE<br />
Sweden Nov. 12–14, 2009 Swedental, Stockholm Swedental Stockholm www.swedental.se<br />
Switzerland Oct. 11–17, 2009 Oralchirurgie und Stomatologie SSO Flims www.fortbildungund<br />
für den Privatpraktiker erholung.ch<br />
Switzerland Oct. 30, 2009 SSRD Jahrestagung SSRD Bern www.ssrd.ch<br />
Ist das Alter in der rekonstruktiven<br />
Zahnmedizin von Bedeutung?<br />
Switzerland Nov. 5–7, 2009 Fachtagung SGK/SSODF SGK Zürich www.swissortho.ch<br />
Switzerland Nov. 12, 2009 Fachtagung der SGI SGI/SSIO Luzern www.sgi-ssio.ch<br />
Switzerland April 14–17, 2010 ITI World Symposium ITI WS Geneva www.iti.org<br />
UAE March 9–11, 2010 UAE International Dental Conference & AEEDC Dubai www.aeedc.<strong>com</strong><br />
Arab Dental Exhibition<br />
UK Dec. 11–13, 2009 British Association of Oral Surgeons BAOS Birmingham www.baos.org.uk<br />
Conference<br />
UK March 19–20, 2010 The Dentistry Show NEC Birmingham www.thedentistryshow.co.uk<br />
USA Sept. 12–15, 2009 Academy of Periodontology‘s AAP Boston, MA www.perio.org<br />
Annual Meeting<br />
USA Oct. 1–4, 2009 American Dental Association‘s ADA Honolulu, HI www.ada.org<br />
Annual Meeting<br />
USA Oct. 12–17, 2009 American Association of Oral and AAOMS Toronto www.aaoms.org<br />
Maxillofacial Surgeons Annual Meeting (Canada)<br />
USA Nov. 4–7, 2009 American College of Prosthodontic‘s ACP San Diego, CA www.prosthodontics.org<br />
Annual Meeting<br />
USA Nov. 28– Greater New York Dental Meeting GNYD New York, NY www.gnydm.org<br />
Dec. 1, 2009<br />
USA Jan. 27–31, 2010 Yankee Dental Congress Yankee Boston, MA www.yankeedental.<strong>com</strong><br />
USA Feb. 25–27, 2010 Chicago Mid-Winter Meeting Mid-Winter Chicago, IL www.cds.org<br />
USA March 3–6, 2010 Joint meeting of the American and AADR, CADR Washington, DC www.iadr.org<br />
Canadian Association for Dental Research<br />
USA March 4–6, 2010 Academy of Osseointegration‘s AO Orlando, FL www.osseo.org<br />
Annual Meeting<br />
STARGET 3 I 09 51
52 STARGET 3 I 09 SIMPLY DOING MORE<br />
1 The abstracts of<br />
the quoted articles are<br />
publicly available from<br />
the database PubMed<br />
(www.pubmed.gov).<br />
The <strong>com</strong>plete articles<br />
can be ordered there<br />
for a fee.<br />
SELECTED LITERATURE OF RECENTLY PUBLISHED JOURNALS 1<br />
LITERATUREALERTS<br />
STRAUMANN ® EMDOGAIN<br />
Crea A, Dassatti L, Hoffmann O,<br />
Zafiropoulos G-G, Deli G. Treatment<br />
of intrabony defects using guided<br />
tissue regeneration or enamel matrix<br />
derivative: a 3-year prospective ran-<br />
domized clinical study.<br />
J Periodontol 2008;79(12):2281-<br />
2289.<br />
Intrabony defects ≥ 4 mm in 40<br />
patients were treated with guided<br />
tissue regeneration (GTR) or EMD,<br />
with clinical evaluations at baseline<br />
and after 12 and 36 months.<br />
Reductions in probing depth and<br />
mean clinical attachment level<br />
gain were significantly greater in<br />
both groups <strong>com</strong>pared to baseline,<br />
and there was a significant<br />
improvement with EMD <strong>com</strong>pared<br />
to GTR. Radiogra<strong>ph</strong>ic bone fill was<br />
also greater with EMD after 36<br />
months.<br />
Hoidal MJ, Grimard BA, Mills MP,<br />
Schoolfield JD, Mellonig JT, Mealey<br />
BL. Clinical evaluation of demineral-<br />
ized freeze-dried bone allograft with<br />
and without enamel matrix deriva-<br />
tive for the treatment of periodontal<br />
osseous defects in humans.<br />
J Periodontol 2008;79(12):2273-<br />
2280.<br />
In 32 patients, 41 intrabony<br />
defects ≥ 2 mm were treated with<br />
demineralized freeze-dried bone<br />
allograft alone or in <strong>com</strong>bination<br />
with EMD. Clinical measurements<br />
were recorded at baseline and<br />
after 6 months. There was a significant<br />
difference from baseline in<br />
each group but no significant difference<br />
between the groups. Both<br />
treatments were therefore safe and<br />
effective.<br />
I<br />
STRAUMANN ® DENTAL<br />
IMPLANT SYSTEM<br />
Bergkvist G, Nilner K, Sahlholm S,<br />
Karlsson U, Lindh C. Immediate load-<br />
ing of implants in the edentulous<br />
maxilla: use of an interim fixed pros-<br />
thesis followed by a permanent fixed<br />
prosthesis: a 32-month prospective<br />
radiological and clinical study.<br />
Clin Implant Dent Relat Res<br />
2009;11(1):1-10.<br />
A total of 168 Straumann implants<br />
were placed in 28 patients and<br />
immediately loaded with an interim<br />
prosthesis; a permanent prosthesis<br />
was placed after 15 weeks.<br />
Mean marginal bone loss values<br />
were 1.6 ± 1.16 mm, 0.41 ±<br />
0.63 mm and 0.08 ± 0.49 mm<br />
for baseline to 8 months, 8 to<br />
20 months and 20 to 32 months,<br />
respectively. After 32 months, the<br />
implant survival rate was 98.2 %,<br />
similar to survival rates obtained<br />
with conventional loading.
Bornstein MM, Halbritter S, Harnisch<br />
H, Weber H-P, Buser D. A retrospec-<br />
tive analysis of patients referred for<br />
implant placement to a specialty clin-<br />
ic: indications, surgical procedures,<br />
and early failures.<br />
Int J Oral Maxillofac Implants<br />
2008;23(6):1109-1116.<br />
A total of 1,206 patients (573<br />
male, 633 female) who had<br />
received 1,817 Straumann<br />
implants over a 3-year period<br />
were retrospectively analyzed.<br />
Maxillary single-tooth replacement<br />
was the most frequent reason for<br />
referral (28.7%), and 40% of<br />
implants were placed in the anterior<br />
maxilla. Bone augmentation<br />
was performed with 51.7% of<br />
implants. The early failure rate<br />
was 0.7%, although significant<br />
failure etiologies were not identified.<br />
Chen ST, Darby IB, Reynolds EC,<br />
Clement JG. Immediate implant<br />
placement postextraction with-<br />
out flap elevation. J Periodontol<br />
2009;80(1):163-172.<br />
Immediate single-tooth Straumann<br />
implants were placed in 85 patients<br />
using a flapless technique, and the<br />
change in mucosal level assessed.<br />
After 1 year, significant recession<br />
of the mesial and distal papilla and<br />
facial mucosa were observed, and<br />
recession was greater for implants<br />
placed facially than lingually.<br />
Where the gingival margin was<br />
initially level, recession > 10% was<br />
more <strong>com</strong>mon in thin than thick<br />
biotypes. However, the majority of<br />
sites (> 80%) achieved acceptable<br />
esthetic out<strong>com</strong>es. Immediate flapless<br />
implant placement was therefore<br />
associated with some recession,<br />
and tissue biotype and implant<br />
position were the main contributory<br />
factors.<br />
PEG-MEMBRAN<br />
SIMPLY DOING MORE<br />
Jung RE, Hälg GE, Thoma DS, Häm-<br />
merle CHF. A randomized controlled<br />
clinical trial to evaluate a new mem-<br />
brane for guided bone regeneration<br />
around dental implants. Clin Oral<br />
Implants Res 2009;20(2):162-168<br />
Straumann implants were placed in<br />
37 patients with an osseous defect<br />
in the posterior maxilla or mandible,<br />
and the defects were grafted with<br />
bovine bone mineral and covered<br />
with either a poly ethylene glycol<br />
(PEG) hydrogel or a collagen<br />
membrane as control (19 and<br />
18 patients, respectively). After 6<br />
months, well-vascularized regenerated<br />
bone was found at all sites,<br />
similar to native bone. Mean defect<br />
fill and mean vertical defect fill were<br />
94.9% and 5.63 ± 1.84mm in the<br />
PEG membrane group and 96.4%<br />
and 4.25 ± 1.16mm at control<br />
sites. Results indicated that the PEG<br />
membrane was as successful as a<br />
collagen membrane for dehiscence<br />
defects, with easier clinical handling.<br />
STARGET 3 I 09 53<br />
Selected literature of<br />
potential interest from<br />
recently published<br />
journals.
54 STARGET 3 I 09 SIMPLY DOING MORE<br />
Selected literature of<br />
potential interest from<br />
recently published<br />
journals.<br />
STRAUMANN ® SLACTIVE<br />
Lai H-C, Zhuang L-F, Zhang Z-Y,<br />
Wieland M, Liu X. Bone apposition<br />
around two different sandblasted,<br />
large-grit and acid-etched implant<br />
surfaces at sites with coronal circum-<br />
ferential defects: an experimental<br />
study in dogs. Clin Oral Implants Res<br />
209;20(3):247-253.<br />
Following extraction of mandibular<br />
premolars and first molars, three<br />
Straumann implants with SLA ®<br />
or modified SLA ® surfaces were<br />
placed in each side of the mandible<br />
of six dogs; the implants had<br />
either a 0.5mm gap, a 1.0mm gap<br />
or no gap between implant and<br />
bone in the coronal 5mm of the<br />
implant. The bone apposition pattern<br />
was similar for both surfaces,<br />
but BIC, new bone fill and distance<br />
from most coronal BIC to defect<br />
bottom were significantly greater for<br />
the modified SLA ® surface at 2 and<br />
4 weeks, but the difference was not<br />
significant at 8 weeks. The modified<br />
SLA ® surface may therefore<br />
enhance bone apposition in coronal<br />
circumferential defects ≤ 1mm at<br />
non-submerged implants.<br />
Schwarz F, Wieland M, Schwartz Z,<br />
Zhao G, Rupp F, Geis-Gerstorfer J,<br />
Schedle A, Broggini N, Bornstein MM,<br />
Buser D, Ferguson SJ, Becker J, Boyan<br />
BD, Cochran DL. Potential of chemi-<br />
cally modified hydro<strong>ph</strong>ilic surface<br />
characteristics to support tissue inte-<br />
gration of titanium dental implants.<br />
J Biomed Mater Res B Appl Biomater<br />
2009;88(2):544-557.<br />
The available evidence on hydro<strong>ph</strong>ilic<br />
surface modifications on<br />
implants was evaluated. Evidence<br />
suggests that hydro<strong>ph</strong>ilic surface<br />
properties have a significant effect<br />
on cell differentiation and growth<br />
factors, and improve early stages<br />
of soft and hard tissue integration<br />
of submerged and nonsubmerged<br />
implants. Preclinical data has been<br />
corroborated by results from clinical<br />
studies.
■<br />
Switzerland<br />
Institut Straumann AG<br />
Peter Merian-Weg 12<br />
4002 Basel<br />
Tel. +41/61 965 11 11<br />
Fax +41/61 965 11 01<br />
Subsidiary <strong>com</strong>panies:<br />
Australia/New Zealand<br />
Straumann Pty. Ltd.<br />
7 Gateway Court<br />
Port Melbourne 3207<br />
Victoria<br />
Tel. +61/39 64 67 060<br />
Fax +61/39 64 67 232<br />
Austria/Hungary<br />
Straumann GmbH Austria<br />
Florido Tower<br />
Floridsdorfer Hauptstr. 1<br />
1210 Wien<br />
Tel. +43/12 94 06 60<br />
Fax +43/12 94 06 66<br />
Belgium<br />
Straumann<br />
Belgicastraat 3<br />
1930 Zaventem<br />
Tel. +32/27 90 10 00<br />
Fax +32/27 90 10 20<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
Brazil<br />
Straumann Brasil Ltda<br />
Rua Funchal 263<br />
04551-060 São Paulo<br />
Tel. +55/11 30 89 66 83<br />
Fax +55/11 30 89 66 84<br />
Canada<br />
Straumann Canada Ltd.<br />
4145 North Service Road<br />
Suite 303<br />
Burlington/ON-L7L 6A3<br />
Tel. +1/905 319 29 00<br />
Fax +1/905 319 29 11<br />
Denmark<br />
Straumann Danmark ApS<br />
Hundige Strandvej 178<br />
2670 Greve<br />
Tel. +45/46 16 06 66<br />
Fax +45/43 61 25 81<br />
Finland<br />
Straumann Oy<br />
Fredrikinkatu 48A 7 krs.<br />
00100 Helsinki<br />
Tel. +358/96 94 28 77<br />
Fax +358/96 94 06 95<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■ ■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■ ■<br />
■ ■<br />
■ ■<br />
■<br />
■<br />
■<br />
■<br />
■ ■<br />
■ ■<br />
■ ■<br />
Subsidiary <strong>com</strong>panies<br />
Distributors<br />
■<br />
France<br />
Straumann France<br />
3, rue de la Galmy - Chessy<br />
77701 Marne-la-Vallée cedex 4<br />
Tel. +33/164 17 30 00<br />
Fax +33/164 17 30 10<br />
Germany<br />
Straumann GmbH<br />
Jechtinger Straße 9<br />
79111 Freiburg<br />
Tel. +49/76 14 50 10<br />
Fax +49/76 14 50 11 49<br />
Great Britain<br />
Straumann Ltd.<br />
3 Pegasus Place, Gatwick Road<br />
Crawley RH109AY,<br />
West Sussex<br />
Tel. +44/12 93 65 12 30<br />
Fax +44/12 93 65 12 39<br />
Italy<br />
Straumann Italia s.r.l.<br />
Viale Bodio 37a<br />
20158 Milano<br />
Tel. +39/02 39 32 831<br />
Fax +39/02 39 32 8365<br />
WORLD-WIDE NEAR TO CUSTOMERS STARGET 3 I 09 55<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■ ■<br />
■<br />
■<br />
■ ■<br />
Japan<br />
Straumann Japan K.K.<br />
3-231-3 Hamaderakoen-cho<br />
Nishi-ku, Sakai-Shi<br />
Osaka, Japan 592-8346<br />
Tel. +81/722 64 18 82<br />
Fax +81/722 64 18 24<br />
Mexico<br />
Straumann México SA de CV<br />
Rubén Darío # 281 int. 1702<br />
Piso 17<br />
Col. Bosque de Chapultepec<br />
11580 México DF.<br />
Tel. +52/55 5282 6262<br />
Fax +52/55 5282 6289<br />
Netherlands<br />
Straumann B.V.<br />
Postbus 338<br />
3400 AH IJsselstein<br />
Tel. +31/30 60 46 611<br />
Fax +31/30 60 46 728<br />
Norway<br />
Straumann AS<br />
P.O.Box 1751 Vika<br />
0122 Oslo<br />
Tel. +47/23 35 44 88<br />
Fax +47/23 35 44 80<br />
■<br />
■<br />
■<br />
■<br />
South Korea<br />
Straumann South Korea<br />
(formerly: B.I. Trading Co. Ltd.)<br />
1467-75, Seocho3 -Dong,<br />
Seocho-Gu, Seoul<br />
Tel. +82/72 265 8777<br />
Fax +82/72 265 8797<br />
Spain/Portugal<br />
Straumann S.A.<br />
Edificio Arroyo - A<br />
Avda. de Bruselas, 38<br />
Planta 1<br />
28108 Alcobendas (Madrid)<br />
Tel. +34/902 400 979<br />
Fax +34/913 449 517<br />
Sweden<br />
Straumann AB<br />
Fabriksgatan 13<br />
41250 Göteborg<br />
Tel. +46/31 708 75 00<br />
Fax +46/31 708 75 29<br />
USA<br />
Straumann USA, LLC<br />
60 Minuteman Road<br />
Andover, MA 01810<br />
Tel. +1/800 448 8168<br />
+1/978 747 2500<br />
Fax +1/978 747 2490
STRAUMANN ® DENTAL IMPLANT SYSTEM<br />
THE NEXT BEST THING TO NATURAL TEETH<br />
Featuring the<br />
unique<br />
SLActive surface!<br />
07/09 152.500 e