Form 326 - Baldwin Filters

1Heavy-Duty, All-Metal Housingprovides unequaled burst- andpulse-withstanding strength.12Molded Standpipe/Centertubehelps to protect high horsepower enginesfrom hard start problems and to preventcollapse caused by a sudden differencebetween internal and external pressure.243Easy-Opening Valvehas one seal instead of three and requires88 percent less torque to open and close.54Heavy-Duty Baseplateis joined to the can with a double-rolled,tuck lock seam to resist leakage due tohigh pressure and vibration.65High-Efficiency InterBlend Mediacombines layers of polyester and celluloseto increase contaminant removal efficiencyand contaminant holding capacity.36All-Metal, Self-Venting Draineliminates the need to separately vent the fuelsystem prior to draining while adding superiorstructural strength and ease of service.Test results using SAE J1985, SAE J1488 and SAE J905 procedures demonstrate that Baldwin Filters’BF1259 exceeds the OE specifications in efficiency and contaminant holding capacity. The enhancedperformance of our InterBlend media combined with heavy-duty construction make the BF1259 the bestchoice as the aftermarket replacement for protecting fuel systems in new generation Cummins engines.

InterBlend Exceeds OEM SpecsBaldwin’s BF1259, with InterBlend TM media, continues to exceed the aftermarket replacement for fuel/water separators onCummins CELECT TM electronic engines. In laboratory tests (see charts below), the BF1259 exceeds OE specifications whentesting contaminant removal efficiency, emulsified water removal capability and contaminant holding capacity.Higher efficiency means less damage-causing contaminants pass through the filter to sensitive fuel injection components,leading to longer and more efficient fuel system life.The BF1259 with InterBlend media was designed to increase contaminant trapping efficiency, dirt-holding capacity and waterremovalefficiency. The final result is a fuel/water separator that meets or exceeds the OEM’s filter specifications.Contaminant Removal EfficiencyBF1259 99.9%Cummins Specification 98.7%0%10% 20% 30% 40% 50% 60% 70% 80% 90% 100%SAE J1985 Test: Flow Rate 90 gph, PTI Fine Test Dust, 100°F, Termination at 60 minutesEfficiency time weighted average at 10 microns.Emulsified Water Removal CapabilityBF1259 98.9%Cummins Specification 95.0%0%10% 20% 30% 40% 50% 60% 70% 80% 90% 100%SAE J1488 Test: Flow Rate 90 gph, 80°FBar graph shows average efficiency over the life of the test.Contaminant Holding CapacityBF1259Cummins Specification55.1 g52.0 g0g15g 30g 45g 60g 75gSAE J905 Test: Flow Rate 90 gph, PTI Fine Test Dust, 100°F, Termination at 4 psidAfricaBaldwin Filters South AfricaPh: 27-21-534-0029Fax: 27-21-534-3730E-mail: africa@baldwinfilter.comChinaBaldwin FiltersPh: 852 2814 7722Fax: 852 2814 7744E-mail: china@baldwinfilter.comMiddle EastBaldwin FiltersPh: (308) 237-9782Fax: (308) 237-9769E-mail: middleeast@baldwinfilter.comSoutheast Asia & Pacific RimBaldwin FiltersPh: 65-6382-6619Fax: 65-6382-6182E-mail: southeastasia@baldwinfilter.comAustralia & New ZealandBaldwin Filters Aust., Pty. Ltd.Ph: 61-3-9353-7300Fax: 61-3-9353-7301E-mail: australia-newzealand@baldwinfilter.comEuropeBaldwin Filters N.V.Ph: 32 3 328 18 88Fax: 32 3 328 18 99E-mail: europe@baldwinfilter.comMoroccoBaldwin FiltersPh: (212) 22 70 00 25Fax: (212) 22 70 00 28E-mail: morocco@baldwinfilter.comUK & IrelandBaldwin Filters Ltd.Ph: 44-1702-291668Fax: 44-1702-290846E-mail: uk-ireland@baldwinfilter.comCentral & South AmericaBaldwin FiltersPh: (308) 233-9220Fax: (308) 237-9769E-mail: latinamerica@baldwinfilter.comMexicoFiltros Baldwin de Mexico, S.A. de C.V.Ph: 52-442-227-3400Fax: 52-442-227-3427E-mail: mexico@baldwinfilter.comRussiaBaldwin FiltersPh: (308) 237-9749Fax: (308) 237-9769E-mail: russia@baldwinfilter.comForm 326 (R 4/11) © 2011 Baldwin Filters, Inc. Printed in U.S.A.