Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
For wide skis.<br />
For children skis.<br />
Racing (X)-Bindings<br />
Certain binding models are produced by TYROLIA<br />
each year for the exclusive use of qualified competitors<br />
under the supervision of TYROLIA <strong>Technical</strong><br />
Specialists. These bindings are not covered by<br />
either the TYROLIA Warranty or any Dealer<br />
Indemnity Program. We recommend you decline<br />
to service them, and warn against their use.<br />
DIN settings ≥10 do not satisfy the standard. Protection<br />
assertions are not applicable. Adjustments<br />
exceeding this range are made on one’s own risk.<br />
Cleaning and Lubricating<br />
3<br />
2 83-132 mm<br />
SKI<br />
45-94 mm<br />
SKI<br />
Ski bindings need regular maintenance. Proper<br />
function is no longer assured if this procedure is<br />
not followed periodically.<br />
• Please use only TYROLIA recommended<br />
lubrication:<br />
TYROLIA grease – 160 052<br />
TYROLIA service – grease- spray – 162 779<br />
Both have the same content, but the grease<br />
tube is for more precise lubrication and the spray<br />
is suited for spots which are hard to reach with<br />
the tube.<br />
• Clean the surfaces with a dry rag or warm water<br />
and mild soap.<br />
2<br />
3<br />
SERVICE/ 57<br />
• Avoid any contact with aggressive solvents or<br />
degreasers!<br />
• Don’t use cleansers!<br />
• High pressure cleaning is not recommended. It<br />
might have the negative side effect of washing<br />
away the lubricating films.<br />
Lubricating the Toe piece<br />
AERO toe<br />
• Lubricate the adjustment screw and the guides<br />
of the main spring in the housing with the<br />
TYROLIA service – grease spray.<br />
All SYMPRO/SP toe<br />
• In case of friction in the track system: Mark the<br />
toe position, open the SP hand lever and slide<br />
the toe piece off.<br />
• Dry clean the track and the toe guide base<br />
gently using a plastic brush.<br />
• Then lubricate the locking mechanism at both<br />
sides of the toe guide base.<br />
• Lubricate also both sides of the track guide<br />
over the entire length.<br />
pict 60<br />
Lubricating the Heel<br />
All Rental bindings<br />
• Mark heel position, open the hand lever and<br />
slide the heel off backwards. At the SR 100 and<br />
SR 70 the guide lock has to be opened with a<br />
screwdriver (pict 61) to get the binding off.<br />
pict 61<br />
Lubricate<br />
• the edge of the release cam under the heel lug<br />
as shown in pict 62.
Change language