29.11.2012 Views

Technical Manual 2005/06 - Tyrolia

Technical Manual 2005/06 - Tyrolia

Technical Manual 2005/06 - Tyrolia

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

52 / RENTAL<br />

Rental / Demo of Partial<br />

Systems<br />

Many shops rent their customers partial ski equipment<br />

systems. Boots only if customers own their<br />

own skis with bindings, or skis and bindings if the<br />

customers own their own boots.<br />

Additionally some shops utilize on-hill “demo days”<br />

as a means by which new products can be tested<br />

and evaluated by potential buyers.<br />

In order to offer these skiers the same level of<br />

care as that afforded under the preceding procedures,<br />

the following guidelines should be used:<br />

Rental of Skis / Binding only.<br />

Customer - owned boots<br />

Although the retail test procedure may be applied<br />

in this case, it is often impractical to require actual<br />

system testing, especially in on-hill situations. In<br />

lieu of retail testing, the following procedures may<br />

be employed:<br />

1. The ski/binding system to be rented or demoed<br />

should be tested “pre-season” using a boot<br />

which passes the TYROLIA Boot Visual Inspection.<br />

2. The skier’s boot should also pass the Visual<br />

Inspection. If any questions exist regarding the<br />

quality of the boot, retail-type testing should<br />

be used.<br />

3. The binding should be adjusted and its indicators<br />

set per current TYROLIA recommendation.<br />

4. A full record noting appropriate customer information<br />

and binding settings should be kept by<br />

the individual or organization responsible for<br />

the adjustment.<br />

5. After seven days of use, the ski/binding system<br />

should be tested according to the In-Season<br />

Inspection Procedures previously described.<br />

Note: for US and Canada:<br />

Signatures of both the customer and TYROLIA<br />

Certified Mechanic are required on all shop forms<br />

to qualify for the TYROLIA Dealer Indemnity<br />

Program.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!