Technical Manual 2005/06 - Tyrolia

More documents

Recommendations

Info

36 / MOUNTING Note: Release/ Retention settings above a release moment of 100 NM at the toe and 400 NM at the heel are higher than the international standards recommend and are used solely at the skier’s own risk! 7. Function Check Check the function of the heel. Make sure that the boot does not catch on the heel during entry and exit. Check the brake function by pressing down the brake treadle (1) by hand. The brake arms (2) must open to the braking position when the brake treadle is released (see pict 46). ➊ ➊ ➋ Check the elasticity and retention of the toe by pushing the boot inward and outward. The binding must recenter the boot easily and quickly from a 15 mm lateral displacement. (SL 7 RAILFLEX LITE, SL 4.5 RAILFLEX LITE - 10 mm) 8. Final Check • Is the proper mounting point selected? ➋ pict 45 pict 46 • Functional brake test passed? • Are all screws fastened tightly? • Is the forward pressure properly adjusted? • Are the release values of toe and heel properly determined and set? • Is the Instruction for use booklet ready to be handed over to the customer?
TYROLIA CARVE PLATES <strong>2005</strong>/<strong>06</strong> CARVE PLATE 13 SLR CARVE PLATE 9 SLR JUNIOR RACING PLATE PLATES/ 37 Art.Nr.131080 Art.Nr.131081 Art.Nr.131088 Art.Nr.131089 Art.Nr.131091
Page 1 and 2: Technical Manual 2005/06 www.tyroli
Page 3 and 4: Ski bindings 2005/2006 Active safet
Page 5 and 6: Faster adjustment to any boot sole
Page 7 and 8: Double FREE FLEX Double FREE FLEX I
Page 9 and 10: Gliding on rails Mounting without d
Page 11 and 12: 03 04 DIAGONAL Toe Active protectio
Page 13 and 14: Super Light - the lightweight Now a
Page 15 and 16: RETAIL / 13 PARTS-REFERENCE CHART R
Page 17 and 18: RENTAL / 15 PARTS-REFERENCE CHART R
Page 19 and 20: NEW TEMPLATES FOR 2005/06 For seaso
Page 21 and 22: DRILL TEMPLATE 92 W 1. Compatibilit
Page 23 and 24: The arrow (2) on the CYBER bridge s
Page 25 and 26: DRILL TEMPLATE 94 W 4 1. Compatibil
Page 27 and 28: DRILL TEMPLATE SP 2003 W 4 5 1. Com
Page 29 and 30: 7. Function Check Before the newly
Page 31 and 32: pict 23 4. Mounting Mounting the To
Page 33 and 34: 1. Compatibility Presently the dril
Page 35 and 36: Detail A 15mm 15mm RAILFLEX SystemI
Page 37: Railflex Lite Base only 15mm Boot C
Page 41 and 42: MOUNTING/ 39 MOUNTING OF JUNIOR BIN
Page 43 and 44: MOUNTING OF TYROLIA BINDINGS ON PLA
Page 45 and 46: MOUNTING/ 43 Ski width Art. Nr. Bra
Page 47 and 48: SYMPRO-SYMRENT-SYSTEM 2005/06 Perfo
Page 49 and 50: SYMPRO-SYMRENT-DATA OVERVIEW Drill
Page 51 and 52: test results which exceed allowable
Page 53 and 54: direction of release is outside of
Page 55 and 56: BOOT-HANDLING AND TESTING Visual In
Page 57 and 58: MAINTENANCE & SERVICE Visual Inspec
Page 59 and 60: For wide skis. For children skis. R
Page 61 and 62: pict 66 You can extract broken scre
Page 63 and 64: Problem Possible Reason Solution SY
Page 65 and 66: SPARE PARTS-LINE 2005/06 MOJO 11 MO
Page 67 and 68: SPARE PARTS-LINE 2005/06 S Y M P R
Page 69 and 70: SCREW OVERVIEW-LINE 2004/05 HD 14 R
Page 71 and 72: CLASSIFY YOURSELF DETERMINING YOUR
Page 73 and 74: If the intersection of the row and
Page 75 and 76: This section must be read, and thor
Page 77 and 78: device supplier to verify that thei
Page 79 and 80: Retailer Agreements and Indemnifica
Page 81 and 82: THE TYROLIA LIMITED WARRANTY TYROLI
Page 83 and 84: Racing (X) Bindings Certain binding
Page 85 and 86: Skiers Requesting Settings not Reco
Page 87 and 88: Shop Name Phone Address City State,
Page 89 and 90:
CHIP TECHNOLOGY USED FOR RENTALS In
Page 91 and 92:
CLASSIFY YOURSELF DETERMINING YOUR
Page 93:
HTM Sport- und Freizeitgeräte AG A
show all

Technical Manual 2005/06 - Tyrolia

Create successful ePaper yourself

Delete template?

Save as template?