You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
36 / MOUNTING<br />
Note: Release/ Retention settings above a<br />
release moment of 100 NM at the toe and 400<br />
NM at the heel are higher than the international<br />
standards recommend and are used solely at the<br />
skier’s own risk!<br />
7. Function Check<br />
Check the function of the heel. Make sure that<br />
the boot does not catch on the heel during entry<br />
and exit.<br />
Check the brake function by pressing down the<br />
brake treadle (1) by hand. The brake arms (2)<br />
must open to the braking position when the<br />
brake treadle is released (see pict 46).<br />
➊<br />
➊<br />
➋<br />
Check the elasticity and retention of the toe by<br />
pushing the boot inward and outward. The binding<br />
must recenter the boot easily and quickly<br />
from a 15 mm lateral displacement.<br />
(SL 7 RAILFLEX LITE, SL 4.5 RAILFLEX LITE<br />
- 10 mm)<br />
8. Final Check<br />
• Is the proper mounting point selected?<br />
➋<br />
pict 45<br />
pict 46<br />
• Functional brake test passed?<br />
• Are all screws fastened tightly?<br />
• Is the forward pressure properly adjusted?<br />
• Are the release values of toe and heel properly<br />
determined and set?<br />
• Is the Instruction for use booklet ready to be<br />
handed over to the customer?