You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Detail A<br />
15mm 15mm<br />
RAILFLEX SystemII - DEMO<br />
Connect the toe with the front of the Railflex<br />
Demo Band by snapping the metal pins of the<br />
toe in the band. Connect the heel with the back<br />
of the Railflex Demo Band by snapping the metal<br />
pins of the heel in the band (pict 34).<br />
pict 34<br />
Detail A<br />
pict 33<br />
Slide the binding on the Railflex base from the rear<br />
until the mark on the band cover is aligned with<br />
the selected mark on the center piece (pict 35).<br />
pict 35<br />
MOUNTING/ 33<br />
Make sure that all components of the binding are<br />
engaged with the base. Then fix the binding position<br />
by tightening the screw in the center piece<br />
located under the adjustment lever (+15/0/-15)<br />
(pict 36).<br />
pict 36<br />
Determine the boot sole length with the TYROLIA<br />
Rental Boot caliper (pict 37).<br />
pict 37<br />
Toe Heel
Change language