Technical Manual 2005/06 - Tyrolia

1. Compatibility
Presently the drill template Railflex & Railflex Lite
is valid for:
Drill template Railflex & Railflex Lite is for mounting
of both (SUPER) RAILFLEX BASEII and RAILFLEX
LITE BASE, if they are not already premounted.
Drill template Railflex & Railflex Lite can be used
for ski widths from 59 to 108 mm. For other skis
use the template adapter set (art. nr. 162 569).
With this adapter set skis from 45 to 132 mm can
be mounted.
Railflex SystemII
All TYROLIA RAILFLEX SYSTEMII bindings can be
used with skis 140 cm and longer.
Note: TYROLIA offers two different types of brakes
for RAILFLEX SYSTEMII bindings – the POWER
BRAKE RAIL and the SL BRAKE RAIL. Refer to the
brake overview on page 42 for brake and binding
compatibility.
POWER BRAKE
The standard brake, the POWER BRAKE LD Rail 80
(art.nr. 162 590), can be used for skis up to 80 mm.
For ski widths from 81 to 95 mm use POWER
BRAKE LD Rail wide 95 (art.nr.162 766) and from
96 to 115 mm use POWER BRAKE LD Rail FAT 115
(art.nr.162 765).
MOUNTING / 31
DRILL TEMPLATE RAILFLEX & RAILFLEX LITE
2
SUPER RAILFLEX BASEII & RAILFLEX BASEII
HD 14 RAILFLEX,
HD 14 RAILFLEX DEMO,
LD 12 RAILFLEX,
SLD 11 RAILFLEX,
SLD 11 RAILFLEX DEMO,
SL 11 RAILFLEX,
SL 10 RAILFLEX,
SLW 9 RAILFLEX
RAILFLEX LITE BASE
SL 9 RAILFLEX LITE,
SL 7 RAILFLEX,
SL 4.5 RAILFLEX LITE
3
For DEMO bindings the POWER BRAKE LD RAIL
DEMO 80 (art.nr. 162 716) is for skis up to 80 mm,
for wider skis use the POWER BRAKE LD RAIL
DEMO WIDE 95 (art.nr. 162 767), which is for skis
from 81 to 95 mm.
SL BRAKE
The SL BRAKE RAIL 78 (art.nr. 162 632) is for skis
up to 78 mm, for wider skis use the SL BRAKE RAIL
WIDE 90 (art.nr. 162 759), which is for skis from
79 to 90 mm.
The Description of the brakes always includes a
number like 72, 78, 90, 93 or 115. This number
stands for the maximum ski width in the brake
area and not in the ski center!!!
Railflex Lite System
The RAILFLEX LITE BASE is delivered with screws
for skis from 140 cm. If the base is mounted on
shorter skis, replace them with shorter screws
(see screw chart in this manual – page 64).
TYROLIA offers two versions of the RAILFLEX LITE
band. The band is delivered with the RAILFLEX
LITE BASE or is premounted on the integrated
HEAD ski.
Band version
short long
Spare part number 162757 162758
Ski length
under 127cm
(Recommendation) 127cm and longer
Boot sole length 220-300mm 240-320mm
Mondo size 17.0-25.5 19.5-27.5
2. Positioning the Drill Template
Open the clamping jaws (2) by rotating the
clamping handles (1) and then place the template
on the ski. Align the boot midsole indicator (3) for
the appropriate base model with the midsole
mounting mark on the ski. Be sure the template is
evenly seated against the ski’s top surface.
Release clamping handles.
1