You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7. Function Check<br />
Before the newly mounted ski equipment is<br />
rented perform a complete functional check.<br />
Note: In some countries (USA) rental equipment<br />
has to pass a Pre-Season Test (See the Rental<br />
section of this manual).<br />
The boot should not catch on the sole hold-down<br />
of the heel as it opens and closes.<br />
Brake<br />
Press the step- on plate (1) down by hand. The<br />
brake arms (2) must close and open automatically<br />
to the braking position when the step-on<br />
plate is released (pict 22).<br />
pict 22<br />
➊<br />
➋<br />
Lateral elasticity of the toe<br />
Press the boot laterally outward. The binding<br />
must re-center the boot easily and quickly from a<br />
15mm lateral displacement. (Model SP 70 ABS<br />
and SP 45 – 10 mm).<br />
8. Final Check<br />
• Has the proper mounting point been selected?<br />
• Have all screws been fastened tightly?<br />
• Has the forward pressure setting been<br />
controlled?<br />
• Has at least one full adjustment been made<br />
using a representative reference boot including<br />
Release- / Retention setting and momentum<br />
test?<br />
• Has the functional check been passed<br />
successfully?<br />
• Functional brake test passed?<br />
• Is the instruction for use booklet ready to be<br />
handed over to the consumer?<br />
MOUNTING/ 27
Change language