Thimbles - Spanelas

ThimblesApplicationsThimbles are used to protect steel wire rope, fibre rope or synthetic rope.They are available in various models and sizes. All indicated types of thimbles can be used in combinationwith the above mentioned types of ropes.RangeVan Beest offers a wide range of thimbles, from nationally standardized models to all types of commerciallyavailable thimbles.DesignThimbles can be cold-rolled, hot-rolled or die-cast, depending on the specific use of the thimbles.Finish2The finish is either painted, electro-galvanized or hot dipped galvanized, unless otherwise specified.CertificationUpon request, all thimbles can be supplied with a works certificate.Instructions for useIt is required that the thimbles are regularly inspected and the inspection should take place in accordance withthe standards given in the country of use.This is required because the products in use may be affected by wear, misuse, overloading with a consequenceof deformation and or alteration of the steel structure.The dimensions of the thimbles must be so that the (wire) rope fits properly into the groove of the thimble.The nominal size of the thimble is the diameter of the (wire) rope with which it is intended to be used.For (wire) ropes of intermediate sizes, the next larger size of thimble must be used.Before use, check if the thimble is free from impurities, sharp edges, cracks or other irregularities which maydamage the wire rope and therefore affect the strength or reliability of the wire rope.50

Thimblesstandard commercial• Material• Finish• Certification: mild steel: electro-galvanized: a works certificate can be supplied upon requestThimblesE-6110E-6120diameter width length width length width weightrope groove inside inside per100 pcsa b c d emm mm mm mm mm mm kg4 4 25 19 16 11 0.45 5 31 22 22 16 0.86 6 37 29 26 19 1.47 7 44 32 32 22 28 8 51 38 34 24 2.89 9 57 42 38 29 310 10 64 44 42 32 4.811 11 70 51 48 35 7.512 12 76 57 51 38 814 14 82 60 57 40 1016 16 89 64 60 42 1518 18 102 69 67 45 2220 20 115 79 76 51 2522 22 127 89 83 54 3224 24 140 102 88 64 4626 26 152 105 102 68 6628 28 165 115 110 73 7730 30 178 121 115 79 8032 32 203 133 140 93 130Thimblesheavy duty stub-end• Material• Finish• Certification: mild steel: electro-galvanized: a works certificate can be supplied upon requestdiameter width length length width thickness weightrope groove inside inside back per100 pcsa b c d emm mm mm mm mm mm kg8 8 51 35 22 4 610 10 64 47 30 4 712 12 76 57 35 5 1414 14 89 65 45 6 2216 16 102 76 50 6 2418 18 114 86 53 8 4320 20 127 94 60 9 6522 22 140 107 65 10 9324 24 152 114 70 10 10228 28 178 130 80 10.5 13532 32 203 157 100 10.5 16236 36 229 177 115 12 36340 40 254 198 120 12 37644 44 279 214 130 15 60850 50 305 215 140 20 96056 56 356 245 160 20 140064 64 407 275 180 20 17005112345678910111213141516

ThimblesThimblesgenerally to DIN 6899 (B)• Material• Standard• Finish• Certification: mild steel: generally to DIN 6899 (B): thimbles for rope diameters up to and including 6 mm areelectro-galvanized, other diameters are hot dipped galvanized: a works certificate can be supplied upon request123456789101112131415E-6131G-6131diameter width length length width thickness weightrope groove inside inside back per100 pcsa b c d emm mm mm mm mm mm kg2.5 3 22 19 12 1.6 0.53.5 4 26 21 13 1.6 0.84 5 32 23 14 1.9 15 6 38 25 16 2.4 1.66 7 44 28 18 2.4 1.97 8 51 32 20 2.8 39 10 57 38 24 3.1 4.711 12 64 45 28 3.3 6.813 13 70 48 30 3.3 813 14 76 51 32 3.7 1015 16 83 58 36 3.8 14.516 17 89 61 38 4.7 1817 18 95 64 40 4.7 2018 20 102 72 45 5.7 2920 22 114 80 50 5.7 3222 24 127 90 56 6.5 4724 26 140 99 62 6.8 5926 28 152 112 70 8 8028 30 165 120 75 8 11030 32 178 128 80 8 12332 34 203 152 95 8.5 15634 36 216 160 100 8.5 17636 38 229 176 110 8.5 19238 40 241 184 115 10.5 29240 42 254 192 120 10.5 32042 45 305 240 150 10.5 3641652

Thimblesgenerally to DIN 6899 (C)• Material• Standard• Finish• Certification: mild steel: generally to DIN 6899 (C): hot dipped galvanized: a works certificate can be supplied upon requestThimblesG-6132G-6133diameter width length width thickness weightrope groove inside inside back per100 pcsa b c dmm mm mm mm mm kg11 12 59 27.5 6.5 2412 13 64 30 7 2514 15 75 35 8 3516 18 86 40 9.5 6518 20 96 45 11 10220 22 107 50 12 13522 24 118 55 13 17924 26 128 60 14.5 22726 28 139 65 15.5 26428 31 150 70 17 40032 35 171 80 19 52036 40 192 90 21.5 57540 44 215 100 24 101044 48 235 110 26.5 118048 53 257 120 29 1940Thimblesgenerally to DIN 83311• Material: mild steel• Standard : generally to DIN 83311• Finish: hot dipped galvanized• Certification : a works certificate can be supplied upon requestnominal width length width thickness weightsize groove inside inside back per100 pcsa b c dmm mm mm mm kg0.4 8 36 20 3 4.50.6 11 50 28 4 9.51 13 60 32 5 181.6 15 68 38 6 242 17 76 42 7 382.5 19 85 48 8 503 21 95 53 9 704 24 110 60 10 1105 28 125 70 10.5 1416 30 135 75 12 2548 34 150 85 13 28210 38 170 95 15 41812 42 190 105 16 51316 46 205 115 16 55020 50 225 125 18 93025 56 250 140 20 130331 62 280 155 21 136340 68 306 170 23 19305312345678910111213141516

ThimblesThimblesgenerally to DIN 3090• Material: mild steel• Standard : generally to DIN 3090• Finish: for diameter 4 and 6 mm electro-galvanizedother diameters hot dipped galvanized• Certification : a works certificate can be supplied upon request123456789101112131415E-6135G-6135diameter width width width length thickness thickness weightwire groove overall inside inside back perrope100 pcsa b c d e fmm mm mm mm mm mm mm kg4 5 9 10 20 5.1 2.1 1.46 7 12 15 30 7.1 2.6 38 9 13 20 40 11 4 7.110 11 16 25 50 14 5 1712 13 19 30 60 16 6 2414 16 22 35 70 17 7 3616 18 25 40 80 19 8 5018 20 27 45 90 21 9 6220 22 32 50 100 23 10 9022 24 33 55 110 24 10 10024 26 37 60 120 27 11 13026 29 46 65 130 30 12 22028 31 50 70 140 33 12 24032 35 55 80 160 38 14 27036 40 60 90 180 42 16 43040 44 65 100 200 46 18 57044 48 70 110 220 53 20 85048 53 75 120 240 58 22 112052 57 80 130 260 64 25 153056 62 85 140 280 67 25 214860 66 90 150 300 70 25 230064 70 95 160 320 78 30 350068 75 100 170 340 81 30 370072 79 105 180 360 84 30 410076 84 115 190 380 87 30 460080 88 120 200 400 90 30 54001654

Thimblesgenerally to DIN 3091• Material : cast mild steel, (GTW 40)• Standard : generally to DIN 3091• Finish: self coloured• Certification : a works certificate can be supplied upon requestThimblesS-6134diameter width width length diameter length weightrope groove per100 pcsa b c d emm mm mm mm mm mm kg8 9 40 66 14 - 1810 11 50 82 18 - 3212 13 60 98 21 - 5214 16 70 114 25 - 8016 18 80 130 28 16 9018 20 90 145 31 18 12120 22 100 161 35 20 16122 24 110 177 38 22 21124 26 120 193 41 24 27126 29 130 209 44 26 35528 31 140 224 47 28 42032 35 160 256 53 32 63036 40 180 288 59 36 88440 44 200 320 65 40 110044 48 220 352 70 44 150048 53 240 384 76 48 200052 57 260 416 81 52 250056 62 280 448 86 56 320064 70 320 512 95 64 460072 79 360 576 104 72 660080 88 400 640 112 80 90005512345678910111213141516

ThimblesThimblesgenerally to EN13411-1• Material: mild steel• Standard : generally to EN13411-1 formerly BS 464• Finish: hot dipped galvanized• Certification : a works certificate can be supplied upon request123456G-6170diameter width length length width thickness weightrope groove inside inside back per100 pcsa b c d einches mm mm mm mm mm kg1/ 46 48 30 20 3.5 5.45/ 168 54 33 22 4 5.73/ 810 64 38 25 4.8 7.67/ 1613 73 41 29 4.8 14.21/ 214 80 44 32 5.6 189/ 1615 80 44 32 5.6 18.95/ 817 98 59 41 7.9 3411/ 1619 108 67 44 7.9 39.73/ 420 124 73 51 9.5 62.413/ 1621 124 73 51 9.5 62.47/ 823 133 83 57 9.5 75.615/ 1625 146 92 64 10.3 1061 27 162 108 70 10.3 1251 1/ 829 178 111 76 12.7 1511 1/ 433 197 133 95 12.7 2041 3/ 838 229 152 105 15.9 3181 1/ 241 254 165 114 17.5 4881 5/ 846 254 165 114 17.5 4991 3/ 451 286 178 127 25.4 5561 7/ 860 318 191 133 28.6 -2 64 330 203 140 28.6 -2 1/ 864 330 203 140 28.6 -2 1/ 467 356 216 146 30.2 -2 1/ 270 413 241 159 31.8 -2 3/ 486 502 273 203 41.3 -Thimblesgenerally to US Fed. Spec. FF-T-276b type III78• Material• Standard• Finish• Certification: mild steel: generally to US Federal SpecificationFF-T-276b type III: hot dipped galvanized: a works certificate can be supplied upon request91011121314151656G-6142diameter length width length width thickness weightrope inside inside back per100 pcsa b c d e finches inches inches inches inches inches kg1/ 42 3 / 161 1 / 21 5 / 87/ 81/ 163.45/ 162 1 / 21 13 / 161 7 / 81 1 / 165/ 646.33/ 82 7 / 82 1 / 82 1 / 81 1 / 87/ 6411.37/ 163 1 / 42 3 / 82 3 / 81 1 / 41/ 816.21/ 23 5 / 82 3 / 42 3 / 41 1 / 29/ 64239/ 163 5 / 82 11 / 162 3 / 41 1 / 29/ 64235/ 84 1 / 43 1 / 83 1 / 41 3 / 45/ 3233.83/ 45 3 13 / 163 3 / 42 7/ 3266.27/ 85 1 / 24 1 / 44 1 / 42 1 / 47/ 3283.31 7 / 86 1 / 84 15 / 164 1 / 22 1 / 21/ 41351 1 / 8- 1 1 / 47 5 7 / 85 1 / 82 7 / 81/ 41851 1 / 4- 1 3 / 88 1 / 166 13 / 166 1 / 43 1 / 21/ 23751 3 / 8- 1 1 / 29 7 1 / 86 1 / 23 1 / 21/ 25401 5 / 811 1 / 48 1 / 88 4 1/ 27311 3 / 412 3 / 168 1 / 29 4 1 / 21/ 28101 7 / 8- 2 15 1 / 810 3 / 812 6 1/ 211702 1 / 417 1 / 811 7 / 814 7 1/ 219352 1 / 218 1 / 412 1 / 414 7 / 87 3/ 4-3 20 1 / 414 16 1 / 27 7 / 83/ 4-

Thimblestowing type• Material• Finish• Certification• Options: mild steel: hot dipped galvanized: a works certificate can be supplied upon request: thicker materialreinforced backwelded fillet platevarious linkskeeper bandsThimblesG-6160circumference width length width length thickness weightrope groove inside inside back perpiecea b c d einches mm mm mm mm mm kg5 44 200 90 140 6 26 54 230 100 160 8 37 62 270 120 190 8 48 70 290 130 200 8 59 80 360 150 235 10 9.510 90 400 160 245 10 11.512 100 430 170 260 10 13.513 120 480 170 280 13 2214 130 490 180 300 13 2415 150 520 190 310 15 2916 160 550 200 320 15 37Thimblespennant line type123456• Material• Finish• Certification: mild steel: hot dipped galvanizedproduced with a welded fillet plate: a works certificate can be supplied upon request78G-6151diameter width length width length width weightwire groove inside inside perropepiecea b c d emm mm mm mm mm mm kg16 17 102 75 75 50 0.418 19 115 85 80 53 0.520 21 127 100 90 60 0.822 23 140 110 95 65 0.924 25 153 115 120 70 130 33 205 155 160 100 2.536 38 230 175 185 115 440 41 255 190 195 120 4.544 46 280 210 215 130 750 52 305 225 240 140 8.356 56 360 240 250 150 12.564 70 435 290 310 180 19.576 81 485 320 360 220 2982 92 560 375 405 240 3590 105 610 410 450 250 42120 130 660 450 480 280 5857910111213141516

ThimblesThimblesfor rope• Material• Finish• Certification: mild steel: electro-galvanized: a works certificate can be supplied upon request123456E-6180width length length width thickness weightgroove inside inside back per100 pcsa b c d emm mm mm mm mm kg8 43 27 16 1 1.110 50 30 19 1.5 1.712 55 36 22 1.75 314 60 41 24 2 3.516 66 43 26 2.5 818 77 47 30 3 1320 91 58 35 3 1622 100 67 38 3 2425 115 71 45 3 2530 140 91 55 3 4335 140 91 55 3 4538 140 91 55 4 45Thimblestubular type78• Material• Finish• Certification: mild steel: painted: a works certificate can be supplied upon request9101112131415P-6190diameter diameter length width thickness height weightwire inside perropepiecea b c d emm mm mm mm mm mm kg10 12 90 23 4 8 0.2512 15 105 27 5 10 0.4214 17 115 27 5 10 0.516 19 120 32 5 12 0.618 22 140 35 5 15 0.7522 25 180 45 6 16 1.424 28 180 45 7 16 1.7526 30 195 47 7 18 232 35 215 60 7 22 2.438 45 260 70 7 27 3.344 50 280 75 7 28 4.061658

Round thimblesordinary type• Material• Finish• Certification: mild steel: up to and including 13 mm electro-galvanizedover 13 mm hot dipped galvanized: a works certificate can be supplied upon requestThimblesE-6143G-6143 width width width weightgroove outside inside per100 pcsa b cmm mm mm kg10 30 18 1.412 33 20 2.613 39 24 3.414 41 28 415 45 30 516 50 35 6.518 56 40 820 60 42 922 65 45 10.525 80 52 2528 98 60 4330 105 65 6535 120 75 9040 135 80 951234Round thimblescontainer type56G-6144• Material• Finish• Certification: mild steel: hot dipped galvanized: a works certificate can be supplied upon request78width width width weightgroove outside inside per100 pcsa b cmm mm mm kg14 80 45 3514 92 55 4114 96 60 4416 80 45 3516 92 55 4116 96 60 4419 80 45 3519 92 55 4119 96 60 4491011121314155916