Melhanna Roller Shades - Skandia Window Fashions

Melhanna Roller ShadesF137/10Standard Roller SystemPin End PlugStandard ClutchSize clutches used depending on materialweight: 8lb, 16lb, & 24lbSize LimitationsMinimum width: 18”Widths less than 18” requirewarranty waiver.Maximum width: 98”**or the maximum width ofthe pattern from the index onpages F2-F5, whichever is less.Maximum Height: 102”Roller TubeHold down brackets are availablefor all fabrics that use a roundfabric wrapped bottomrail.ClutchAssemblyBeadChainBracketBracketCoverRoller Tube SizesThe standard roller system uses aluminum tubesizes with outside dimensions of1-1/4", 1-5/8” and 1-3/4” depending on materialweight and clutch size used. Shades willmade according to the best tube and clutchspecifications for the specific fabric weight. Ifall tube and clutch sizes are desired to be thesame, all shades will have to be made at thelargest size. Any changes to the factory specificationswill be considered upgrades and additionalsurcharges will apply.Fabric OrientationIf one or more shadcs on an order require fabricto be railroaded, all other shades will be railroadedto match.Spring Return Roller ShadesManufactured on a smaller 1-1/4” tube.Max square foot shade allowed: 18Not recommended for large and heavy shades.No surchargeAvailable for the following roller shade fabrics:HarvestDarkness FallsSheerWeave 2390/2360SheerWeave 2100SheerWeave 7500ClaireSavannaSun Shadow 3500HTSolarViewWoodFactory DeductionsThe factory will deduct 1/4” for inside mounts(IB) on both standard roller and standard cassettesystems.Fabric Roller WrapExtra length of 12” to 20” (depending on thepattern used) is added to allow for the top ofthe shade to wrap around the roller. This is particularlycrucial in materials that can be railroaded.The maximum length for a railroadedshade is the material width minus the rollerwrap amount needed. (Refer to index for rollerwrap amounts)Fabric WidthVaries depending on pattern.Refer to fabric index at the beginning of thissection.For non-railroaded shades, maximum shadewidth is 2” less than fabric width.Measuring InformationBecause of the hardware requirements, materialwidth for a standard rollersystem will be 1-1/4” narrower.There will be a light gap of1/2” on each side of theshade. To avoid light gaps,outside mount (OB) is recommended.Standard Roll TypeFabric rolls down from theback of roller.Reverse Roll TypeFabric rolls down from the front of roller.Not available withcassette roller systemor square fascias.3” and 4” FabricInsertable Valances*The decorative, separate-mounting, 3”and 4” curved aluminum valances withfabric inserts can be used with both standardroll and reverse roll types. Available, as standardwith IB and OB mounts, with matchingend caps in colors Off-White, Black and Silver.Minimum width is 18”. Maximum width is168”.Standard Cassette Roller System*The cassette is a stylish color coordinated cassetteenclosure with or without a matching fabricinsert.The standard cassetteroller systemcan only be usedwith the standardroller system. Canonly accommodatethe standardroll type.Can be installedas an inside oroutside mount.The plain cassetteis available inwhite, black and silver finishes.The fabric insertable cassette is available inwhite and black. End cap colors for both areavailable in white and black.Maximum width: 98”See surcharge on page F10.Plastic Bead Chain ControlStandard roller system uses color coordinatedplastic bead chain. Factory will match beadchain to fabric.Cut-outsAreas to be cut out to accommodate objectinterference around window openingBottom RailBottom rails can be round, fabric-wrapped orenclosed flat metal.Hold downs can only be used with round, fabric-wrappedbottom rails.Installation BracketsStandard clutch system uses metal left-right pinreceptable brackets for wall, ceiling and insidemount applications.Cassette system uses top mounted turnbucklebrackets.Projection blocks (1/2”) can be ordered forstandard roller systems only.Material BiasBias runs 1/16” per sq ft.WarrantyAll roller shades carry a 5-year limited warranty.Fading, minor material telescoping,material cupping are not covered under thewarranty.*NOTE: Use of any valance, fascia or cassettemay effect clutch and tube size combinations.Roller Shades