Melhanna Roller Shades - Skandia Window Fashions

Melhanna Roller ShadesDarkness Falls, SheerWeave 2410, SheerWeave 2500, SheerWeave 4100,SheerWeave 4400, SheerWeave 5000* Price Chart 5Width Up ToLengthup to36" 48" 60" 72" 84" 96" 108" 120" 132" 144"36" 107 133 167 177 210 233 290 317 350 37748" 123 150 190 207 240 270 333 363 403 52060" 143 180 227 247 290 333 377 410 457 58072" 160 197 250 277 323 370 420 460 590 63784" 173 217 277 303 357 407 460 507 643 69796" 187 233 300 330 390 447 503 553 697 753108" 207 260 330 367 430 483 547 600 750 813120" 220 277 357 393 463 520 590 650 803 870132" 233 297 380 420 497 557 633 697 857 930144" 247 313 403 450 530 593 677 743 910 987*SheerWeave 5000 - colors 5507R thru 5535R cannot be railroaded.SheerWeave 5000 - colors 5502R thru 5505R can be railroaded but fabric will fray.Savanna, SheerWeave 7300 Price Chart 6Width Up ToLengthup to36" 48" 60" 72" 84" 96" 108" 120" 132" 144"36" 117 147 187 200 237 267 327 360 397 43048" 137 170 217 237 280 313 383 420 467 59060" 163 203 260 287 337 387 440 480 537 66772" 180 227 293 323 380 437 493 543 683 74384" 197 250 323 357 423 483 550 603 753 81796" 213 273 353 393 463 530 607 667 823 893108" 237 303 393 437 513 580 660 727 893 970120" 253 323 423 470 557 627 717 790 963 1043132" 273 347 453 507 600 677 773 850 1033 1120144" 290 370 487 543 643 723 827 913 1103 1197F9Please refer to Index - pages F2-F5 for selected pattern and max width availability.Fabric widths over 72” using a Standard or Deluxe Roller system are only available railroaded with a maximum length of 60”.Fabric widths over 79” using a Standard or Deluxe Roller system are only available railroaded with a maximum length of 66”.Surcharges for Deluxe Roller, Valances, Fascia, CassettesWidth Up ToType 36" 48" 60" 72" 84" 96" 108" 120" 132" 144"Deluxe Roller 20 33 47 60 73 87 93 100 107 1133” Valance 43 54 64 75 86 100 111 121 132 1464” Valance 57 75 89 107 125 143 157 175 193 2114” Square Fascia 46 57 68 79 93 104 114 125 136 1465” Square Fascia 97 113 127 143 157 173 190 203 220 2375” Square Double Fascia Add 50% to 5” Square Fascia PriceStandard Cassette 68 86 107 125 143 164 182 200 221 239Deluxe Cassette 120 71 93 111 132 150 171 189 211 229 250Panel TrackWidth Up to48" 60" 72" 84" 96" 108" 120" 132" 144" 156" 168" 180" 192"Panel Track Surcharges - Add price to grids aboveN/A= 2 Channel 2/4 Panels 133 145 157 171 N/A N/A N/A N/A N/A N/A N/A N/A N/ANot Available 3 Channel 3 Panels 144 157 170 185 201 209 N/A N/A N/A N/A N/A N/A N/Afor this size 4 Channel 4/6 Panels N/A N/A 205 223 242 253 263 274 286 298 311 324 338or style 5 Channel 5 Panels N/A N/A 222 242 263 274 285 297 310 323 337 351 366Roller Shades7/10

F10Melhanna Roller ShadesTimber, Tundra Price Chart 7Width Up ToLengthup to36" 48" 60" 72" 84" 96" 108" 120" 132" 144"36" 107 127 157 167 193 213 240 270 297 32048" 117 140 173 187 217 240 267 303 333 36060" 130 160 197 213 247 273 307 333 370 39772" 140 173 213 230 270 300 337 367 483 52384" 153 187 230 250 290 327 363 400 520 56396" 163 200 247 270 313 350 393 430 557 600108" 173 213 263 290 337 377 423 463 593 640120" 183 223 283 310 360 403 453 497 627 680132" 193 237 300 327 383 427 483 527 663 720144" 203 250 317 347 407 453 510 560 700 757Prairie, Safari, Veldt, Wood Price Chart 8Width Up ToLengthup to36" 48" 60" 72" 84" 96" 108" 120" 132" 144"36" 110 133 163 173 203 227 253 287 313 33748" 120 147 183 197 230 253 287 323 353 38360" 133 163 200 217 253 283 320 360 397 42772" 143 177 220 240 280 313 353 397 437 56084" 157 190 240 263 307 343 387 433 480 60396" 173 213 267 290 340 380 430 470 600 650108" 183 227 287 313 367 410 463 507 640 693120" 193 240 307 337 393 440 497 543 683 740132" 207 257 323 357 420 470 530 580 723 783144" 217 270 343 380 443 497 563 617 767 830Please refer to Index - pages F2-F5 for selected pattern and max width availability.Fabric widths over 72” using a Standard or Deluxe Roller system are only available railroaded with a maximum length of 60”.Fabric widths over 79” using a Standard or Deluxe Roller system are only available railroaded with a maximum length of 66”.Roller ShadesSurcharges for Deluxe Roller, Valances, Fascia, CassettesWidth Up ToType 36" 48" 60" 72" 84" 96" 108" 120" 132" 144"Deluxe Roller 20 33 47 60 73 87 93 100 107 1133” Valance 43 54 64 75 86 100 111 121 132 1464” Valance 57 75 89 107 125 143 157 175 193 2114” Square Fascia 46 57 68 79 93 104 114 125 136 1465” Square Fascia 97 113 127 143 157 173 190 203 220 2375” Square Double Fascia Add 50% to 5” Square Fascia PriceStandard Cassette 68 86 107 125 143 164 182 200 221 239Deluxe Cassette 120 71 93 111 132 150 171 189 211 229 250Panel TrackWidth Up to48" 60" 72" 84" 96" 108" 120" 132" 144" 156" 168" 180" 192"Panel Track Surcharges - Add price to grids aboveN/A= 2 Channel 2/4 Panels 133 145 157 171 N/A N/A N/A N/A N/A N/A N/A N/A N/ANot Available 3 Channel 3 Panels 144 157 170 185 201 209 N/A N/A N/A N/A N/A N/A N/Afor this size 4 Channel 4/6 Panels N/A N/A 205 223 242 253 263 274 286 298 311 324 338or style 5 Channel 5 Panels N/A N/A 222 242 263 274 285 297 310 323 337 351 3667/10

Melhanna Roller ShadesF11Marle, Montana Price Chart 9Width Up ToLengthup to36" 48" 60" 72" 84" 96" 108" 120" 132" 144"36" 153 193 247 273 323 363 410 460 513 55748" 180 230 297 327 387 437 497 557 620 67360" 207 263 343 383 453 510 583 653 730 79072" 233 300 390 437 520 587 670 747 837 99384" 260 333 440 493 583 660 757 843 947 111396" 290 377 493 553 657 743 850 940 1133 1230108" 317 410 540 610 723 820 937 1037 1240 1350120" 343 447 590 663 790 893 1023 1130 1350 1467132" 370 480 637 720 857 967 1110 1227 1457 1583144" 393 517 683 773 920 1043 1197 1323 1567 1703Please refer to Index - pages F2-F5 for selected pattern and max width availability.Fabric widths over 72” using a Standard or Deluxe Roller system are only available railroaded with a maximum length of 60”.Fabric widths over 79” using a Standard or Deluxe Roller system are only available railroaded with a maximum length of 66”.Surcharges for Deluxe Roller, Valances, Fascia, CassettesWidth Up ToType 36" 48" 60" 72" 84" 96" 108" 120" 132" 144"Deluxe Roller 20 33 47 60 73 87 93 100 107 1133” Valance 43 54 64 75 86 100 111 121 132 1464” Valance 57 75 89 107 125 143 157 175 193 2114” Square Fascia 46 57 68 79 93 104 114 125 136 1465” Square Fascia 97 113 127 143 157 173 190 203 220 2375” Square Double Fascia Add 50% to 5” Square Fascia PriceStandard Cassette 68 86 107 125 143 164 182 200 221 239Deluxe Cassette 120 71 93 111 132 150 171 189 211 229 250Panel TrackWidth Up to48" 60" 72" 84" 96" 108" 120" 132" 144" 156" 168" 180" 192"Panel Track Surcharges - Add price to grids aboveN/A= 2 Channel 2/4 Panels 133 145 157 171 N/A N/A N/A N/A N/A N/A N/A N/A N/ANot Available 3 Channel 3 Panels 144 157 170 185 201 209 N/A N/A N/A N/A N/A N/A N/Afor this size 4 Channel 4/6 Panels N/A N/A 205 223 242 253 263 274 286 298 311 324 338or style 5 Channel 5 Panels N/A N/A 222 242 263 274 285 297 310 323 337 351 366Roller Shades7/10

F12Features and SpecsMaterial Style and Openess Factor Light Filtering Screen - 1%, 3%, 5%, 10% O.F.Material ContentVinyl Coated FiberglassFabric roller wrap 12” - 20”Fabric Width 98", 126”OB Cloth Coverage on Standard Roller Ordered width minus 1”IB Cloth Coverage on Standard Roller Ordered width minus 1-1/4”OB Cloth Coverage onStandard CassetteOrdered width minus 1-3/8”IB Cloth Coverage onStandard CassetteOrdered width minus 1-5/8”OB Cloth Coverage on Deluxe Roller Ordered width minus 1” to 1-1/4” (tube/clutch used)IB Cloth Coverage on Deluxe Roller Ordered width minus 1-1/8” to 1-3/8” (tube/clutch used)OB Cloth Coverage on Deluxe Cassette Ordered width minus 1-1/4” to 1-3/8” (tube/clutch used)IB Cloth Coverage on Deluxe Cassette Ordered width minus 1-3/8” to 1-1/2” (tube/clutch used)Standard RollFabric rolls down the back of the rollerReverse Roll (N/A for Cassette) Fabric rolls down the front of the rollerValance3” Standard curved aluminum w/fabric insert4” Deluxe curved aluminum w/fabric insertCassetteSee descriptions within this sectionTube Size - StandardDeluxe1-1/4", 1-5/8”, 1-3/4” (OD) Aluminum1-1/2”, 2”, 2-1/2” (OD) AluminumBottom RailFabric-wrapped - Round BR or Flat Hem BarMaximum Width - Standard & Deluxe Standard - 98", Deluxe - 144”Maximum Width - Cassette Standard - 98”, Deluxe - 120”Minimum Width - All 18" Waiver required for widths < 18"Maximum Height - Std & Deluxe Standard - 102”, Deluxe - 120”Maximum Height - Cassette Standard - 102”, Deluxe - 120”Panel Track SpecificationsSee Panel Track within this sectionWood AccentsSee description within this sectionBrackets - Standard RollerBrackets - DeluxeBrackets - FasciaBrackets - CassetteStandard Lift SystemDeluxe Lift SystemPlastic Beaded Cord LoopDeductionsStandard, Deluxe and CassetteMaterial BiasWarrantyWarranty ExclusionsMelhanna Roller ShadesRoller Shades - Specs, Options and SurchargesLeft, Right - Pin Receptacle - MetalUniversal - Pin Receptacle - MetalSee descriptions within this sectionClutch - 8lb, 16lb, & 24lb capacityClutch - 15lb, 20lb, 30lb, 40lb, 53lb capacityMinimum 2/3 shade height - Color Coord.IB Width Standard=1/4"IB Width Deluxe/Cassette=1/8"OB=0”1/16" per foot5 Year LimitedSun Fading, minor material telescoping,material cuppingOptions and SurchargesGalaxy 200 Commercial Geared Clutch• 20lb - 24lb max system weight• Reduces required pull force• Recommended for shades requiring less lift forceGalaxy 400 Commercial Geared Clutch• 32lb - 53lb max system weight• Reduces required pull force• Recommended for shades requiring less lift forceExterior Clutch and Brackets15lb and 20lb clutch30lb clutchLink System• Only available for use on 1-1/2” tube size• Links 2 or 3 shades to operate with a single clutchStandard Roller Shade Fabric Insertable Cassette $18Panel Track Valance OnlyUp to 72” wide72-1/8” to 192” widePanel Track Only2 or 3 channel - price is per foot of width4 or 5 channel - price is per foot of widthCut-Out (may fray) (N/A for door handles)$25$40$20$25$10eachHold Down Brackets (N/A on Flat Hem Bar) $5Bottomrail - Round or Flat Hem BarMetal Bead Chain on Cord Loop(recommended on shades wider than 96”)Standard roller - NickelDeluxe roller - Nickel, Brass, Brown, BlackGray, Stainless Steel, WhiteExtension Blocks - 1/2” eachMotorization - See Section L$50$90$35$45$50Double Shade Bracket• Allows for 2 shades to mount onto one set ofinstall brackets. Shades operate independently. $50Brackets come in 2 sizes with bracket covers.Available in Black or White only.Increase clutch and tube size $60N/C$25N/CYesWood Accent and Windance Wood Cornice ColorsRoller ShadesWidth Up ToWood Accent and Windance Wood Cornice ColorsColor# Color Name Color# Color Name Color# Color Name46 True White 67 Golden Oak 85 Java48 Brite White 69 Black Onyx 86 Maple50 Pure White 74 Pecan 87 Rose52 Alabaster 80 Latte 89 Ebony56 Bone 81 Merlot 90 Cherry59 Vanilla 82 Walnut 98 Mahogany60 Natural 83 Cinnamon65 Almost White 84 EspressoNET SURCHARGE48" 60" 72" 84" 96" 108" 120" 132" 144" 156" 168" 180" 192"Euro-Style 19 21 23 25 28 30 32 34 35 37 40 42 44Windance Cornice 43 50 58 65 73 80 88 95 103 110 118 125 133Our wood accents program was designed to provide an affordable way toaccent your panel track pattern choice in our Melhanna roller shadecollection. Wood accents consist of horizontal pieces of wood, in theEuro style, spaced 10” to 12” down each panel. A Windance wood cornicegives the product a final polished look. Cross-reference the colorsoffered here with those of our GrandView® woodblind color selector.Euro-Style Wood AccentThe soft rounded appearance createsan atmosphere of tranquil elegancethat will enhance any pattern selectionin our Panel Track Roller Shades.7/10

Melhanna Roller ShadesF137/10Standard Roller SystemPin End PlugStandard ClutchSize clutches used depending on materialweight: 8lb, 16lb, & 24lbSize LimitationsMinimum width: 18”Widths less than 18” requirewarranty waiver.Maximum width: 98”**or the maximum width ofthe pattern from the index onpages F2-F5, whichever is less.Maximum Height: 102”Roller TubeHold down brackets are availablefor all fabrics that use a roundfabric wrapped bottomrail.ClutchAssemblyBeadChainBracketBracketCoverRoller Tube SizesThe standard roller system uses aluminum tubesizes with outside dimensions of1-1/4", 1-5/8” and 1-3/4” depending on materialweight and clutch size used. Shades willmade according to the best tube and clutchspecifications for the specific fabric weight. Ifall tube and clutch sizes are desired to be thesame, all shades will have to be made at thelargest size. Any changes to the factory specificationswill be considered upgrades and additionalsurcharges will apply.Fabric OrientationIf one or more shadcs on an order require fabricto be railroaded, all other shades will be railroadedto match.Spring Return Roller ShadesManufactured on a smaller 1-1/4” tube.Max square foot shade allowed: 18Not recommended for large and heavy shades.No surchargeAvailable for the following roller shade fabrics:HarvestDarkness FallsSheerWeave 2390/2360SheerWeave 2100SheerWeave 7500ClaireSavannaSun Shadow 3500HTSolarViewWoodFactory DeductionsThe factory will deduct 1/4” for inside mounts(IB) on both standard roller and standard cassettesystems.Fabric Roller WrapExtra length of 12” to 20” (depending on thepattern used) is added to allow for the top ofthe shade to wrap around the roller. This is particularlycrucial in materials that can be railroaded.The maximum length for a railroadedshade is the material width minus the rollerwrap amount needed. (Refer to index for rollerwrap amounts)Fabric WidthVaries depending on pattern.Refer to fabric index at the beginning of thissection.For non-railroaded shades, maximum shadewidth is 2” less than fabric width.Measuring InformationBecause of the hardware requirements, materialwidth for a standard rollersystem will be 1-1/4” narrower.There will be a light gap of1/2” on each side of theshade. To avoid light gaps,outside mount (OB) is recommended.Standard Roll TypeFabric rolls down from theback of roller.Reverse Roll TypeFabric rolls down from the front of roller.Not available withcassette roller systemor square fascias.3” and 4” FabricInsertable Valances*The decorative, separate-mounting, 3”and 4” curved aluminum valances withfabric inserts can be used with both standardroll and reverse roll types. Available, as standardwith IB and OB mounts, with matchingend caps in colors Off-White, Black and Silver.Minimum width is 18”. Maximum width is168”.Standard Cassette Roller System*The cassette is a stylish color coordinated cassetteenclosure with or without a matching fabricinsert.The standard cassetteroller systemcan only be usedwith the standardroller system. Canonly accommodatethe standardroll type.Can be installedas an inside oroutside mount.The plain cassetteis available inwhite, black and silver finishes.The fabric insertable cassette is available inwhite and black. End cap colors for both areavailable in white and black.Maximum width: 98”See surcharge on page F10.Plastic Bead Chain ControlStandard roller system uses color coordinatedplastic bead chain. Factory will match beadchain to fabric.Cut-outsAreas to be cut out to accommodate objectinterference around window openingBottom RailBottom rails can be round, fabric-wrapped orenclosed flat metal.Hold downs can only be used with round, fabric-wrappedbottom rails.Installation BracketsStandard clutch system uses metal left-right pinreceptable brackets for wall, ceiling and insidemount applications.Cassette system uses top mounted turnbucklebrackets.Projection blocks (1/2”) can be ordered forstandard roller systems only.Material BiasBias runs 1/16” per sq ft.WarrantyAll roller shades carry a 5-year limited warranty.Fading, minor material telescoping,material cupping are not covered under thewarranty.*NOTE: Use of any valance, fascia or cassettemay effect clutch and tube size combinations.Roller Shades

F14Deluxe Roller SystemMelhanna Roller ShadesBracket Covers2” Projection BracketStandard BracketAdapterReverse RollFabric rolls down from thefront of roller.Not available with cassetteroller system or square fascias.2-7/8” Projection BracketIntermediateBracket20lb Clutch15lb Clutch1-1/2” Roller Tube30lb ClutchIntermediateBracket2” Roller TubeStandard Pin End Plug2-1/2” Roller Tube2” ProjectionBracketAdapterStandard BracketHeavy Duty Pin End Plug4” Fabric Insertable Valance*The 4” curved aluminumvalancewith fabric insertcan is available incolors Off-White,Black and Silver.Minimum width is18”. Maximum width is 168”.Roller ShadesDeluxe and Commercial Geared ClutchesDeluxe clutches used depending on materialweight: 15lb, 20lb, 30lbCommercial geared clutches are used dependingon material weight: 40lb (G200), 53lb(G400)The G200 commercial geared clutch has a 20-24lb. max system weight. Gears reduce therequired pull force of the shade. This clutch isrecommended for shades requiring less pullforce.The G400 commercial geared clutch has a 32-53lb. max system weight. Gears reduce therequired pull force.Exterior ClutchesClutches feature stainless steel interior components.All clutches come with treated outdoor brackets.15lb and 20lb clutches available inSize LimitationsMinimum width: 18”Widths less than 18” require warranty waiver.Maximum width: 144”**or the maximum width of the pattern fromthe index on pages F2-F6, whichever is less.Maximum Height: 120”Roller Tube SizesThe deluxe roller system uses aluminum tubesizes with outside dimensions of1-1/2”, 2” and 2-1/2” depending on materialweight and clutch size used. Shades will madeaccording to the best tube and clutch specificationsfor the specific fabric weight. If all tubeand clutch sizes are desired to be the same, allshades will have to be made at the largest size.Any changes to the factory specifications willbe considered upgrades and additional surchargeswill apply.Fabric OrientationIf one or more shadcs on an order require fabricto be railroaded, all other shades will be railroadedto match.2-7/8” Projection BracketBracket CoversIntermediate BracketThis bracket allows installation of 2 brackets atthe idle ends in the deluxe roller system, as wellas the cassette system. Shades will operatedindependently. Control cords must be orderedas left on left shade and right on right shade.Factory DeductionsThe factory will deduct 1/8” from the orderedwidth for inside mounts (IB) on deluxe rollerand deluxe cassette systems.Fabric Roller WrapExtra length of 12” to 20” (depending on thepattern used) is added to allow for the top ofthe shade to wrap around the roller. This isparticularly crucial in materials that can berailroaded. The maximum length for a railroadedshade is the material width minus the rollerwrap amount needed. (Refer to index for rollerwrap amounts)Fabric WidthVaries depending on pattern.Refer to index chart on pages F2-F5.For non-railroaded shades, maximum shadewidth is 2” less than fabric width.Measuring InformationThe fabric width deductions can be anywherefrom 1-1/8” to 1-3/8” on IB mounted shadesand from 1-3/8” to 1-1/2” on the DeluxeCassette. There will be a light gap of 1/2” oneach side of the shade. To avoid light gaps, outsidemount (OB) is recommended. On OBmounted shades there will be 1” to 1-1/4”deduction. If exact ordered fabric width isrequired, contact customer service.Standard RollFabric rolls down from theback of roller.4” and 5” Deluxe Square Fascia*The 4” Deluxe Square Fascia accommodates allclutches. Fascia is available in colors: White,Antique White, Black, Bronze and Silver. Theend caps and installation brackets are availablein the same colors as the fascia. The fascia canonly accommodate the standard roll typeshade. Can be installed as an inside or outsidemount. Minimum width is 18”. Maximumwidth is 168”. Depth projection from back ofbracket is 4-1/8”. Height projection is 4”.The 5” Square Fascia accommodates all clutchesand will allow the shade to either be a standardroll type or reverse roll type. The 5”Square Double Fascia is really two fasciastogether giving the appearance of a cassette.Both 5” Square Fascias can accommodate twoshades installed front to back. For pricing, addtwo shades together and then the fascia costs.See surcharge price charts on price grid pages.Deluxe Cassette 120 Roller System*The deluxe cassette is a stylish color coordinatedcassette enclosure with or without a matchingfabric insert. Deluxe cassette is available incolors: White, Antique White, Black, Silver,ClutchFabricinsertable faceEnd CapTop Mount BracketPin EndPlugIntermediateDouble Pin Bracket -(5/8” fabric gap)End Cap7/10

and Bronze.End caps come in the same colors as the deluxecassette. The deluxe cassette can only accommodatethe standard roll type. Can be installedas an inside or outside mount. Minimum widthis 18”. Maximum width is 120”. Depth projectionfrom back of bracket is 4-1/2”. Height projectionis 4-7/8”.*NOTE: Use of any valance, fascia or cassettemay effect clutch and tube size combinations.Plastic and Metal Bead Chain ControlsDeluxe roller system uses color coordinatedplastic bead chain. Colors available are white,antique white, brown, black, and gray. Factorywill determine the appropriate color for fabricordered unless otherwise noted on order form.Metal bead chain control is also available for a$25 surcharge for the deluxe roller system andis recommended for shades over 96” in width.Colors available are nickel, brass, brown, gray,black, white and rust-proof stainless SteelLink SystemUsed to link multiple (up to 3) shades with asingle clutch control. Can only be used withMotorizationMotorization is available for the Deluxe rollersystem. See Motorization section for moreinformation.Material BiasBias runs 1/16” per sq ft.Melhanna Roller ShadesWarrantyAll roller shades carry a 5-year limited warranty.Fading, minor material telescoping,material cupping are not covered under thewarranty.Sample Piece AvailabilitySample pieces of 12” x 12” are available at $3Net charge per square foot plus $10.00 for shipping.Sample pieces are acquired from leftover fabricfrom orders. If the requested fabric piece isavailable it will ship in 1-2 days from placedorder.If a requested sample piece is not immediatelyavailable, the order will be placed on hold untilan order for that fabric is manufactured andleftovers are acquired to fill the sample order.If sample piece is requested before leftovers areacquired, the full width of material at a minimumof 12" height will have to be ordered.GREENGUARD Indoor Air QualityCertification ProgramF15The GREENGUARD Indoor Air QualityCertification Program gives assurance thatproducts designed for use in office environmentsand other indoor spaces meet strictchemical emissions limits, which contribute tothe creation of healthier interiors. AchievingGREENGUARD Certification gives credenceto manufacturers’ sustainability claims, backingthem with empirical scientific data from anunbiased, third-party organization.New Safety Clip Design!Prevents beaded chainfrom twisting and danglingand becoming asafety hazard. Used onall lift systems.If not installed, prohibitsproduct fromfunctioning properly.the 1-1/2” tube size. Cannot be used with cassetteor fascia systems.Installation BracketsDeluxe clutch system uses metal universal pinreceptable brackets for wall, ceiling and insidemount applications.Projection brackets are available in 2” and 2-7/8” sizes.Cassette system uses top mounted turnbucklebrackets.Projection blocks (1/2”) can be ordered forstandard roller systems only.Confidence in textiles – tested for harmfulsubstancesOften known as Oeko-Tex standardsConfidence in textilesIt is a global testing andaccreditation scheme for the screening ofharmful substances within consumer textiles. Itis the leading label for textiles that have beenscreened for harmful substances.7/10Double Shade Installation BracketUsed to install two roller shades. One shadewill roll standard, theother will roll reverse.Cannot be used in conjuctionwith valances,fascias or cassettes.Bottom RailBottom rails can beround, fabric-wrappedor enclosed flat metal.Hold downs can only be used with round, fabric-wrappedbottom rails.GREENGUARD Children & SchoolsCertification ProgramFor products intended for use in schools, daycaresor other environments where childrenspend significant periods of time, the GREEN-GUARD Children & SchoolsSM CertificationProgram offers stricter certification criteria. It isreferenced by both The Collaborative for HighPerformance Schools (CHPS) and theLeadership in Energy and EnvironmentalDesign (LEED) Building Rating System.Products certified to this standard are also suitablefor use in environments where childrenand others work, play or reside.Many roller shade fabrics have exclusiveMicroban® antimicrobial protection to inhibitthe growth of bacteria, mold and mildew thatcan cause stains, odors and degrade the fabric.As Microban protection is infused into fabricsduring manufacturing, Microban technologyprovides continuous cleanliness protectionagainst microbes, keeping shades cleaner andfresher for longer than ever before.Roller Shades

F16Panel TracksMelhanna Roller ShadesTop view looking downClosed positionFixed panelMotion panelMotion panelFixed panelOpen positionFixed panelMotion panelOpen positionFixed panelMotion panel5/8”Room side (inside)Top view looking downRoom side (inside)Cord Traverse OverviewTrack Profiles: Panel Track - 2 Channels - 2 or 4 Panels1 1/2”Motion panelFixed panelSpecifications 2 - Channel track 2 or 4 PanelsMinimum Width 48"Maximum Width 84"Minimum Length 30"Maximum Length 102"IB DeductionsOB DeductionsSplit DrawOne-Way LeftOn-Way RightWidth - 1/4"Length - 3/8"Width - NoneLength - NoneCord OptionsCord RightCord LeftLeft StackRight StackWand Options4 Panels2 PanelsSplit Draw 1 left, 1 right 4 PanelsOne-Way LeftOn-Way RightLeft StackRight Stack2 PanelsClosed positionFixed panelMotion panelTrack Profiles: Panel Track - 3 Channels - 3 PanelsRoller ShadesClosed positionFixed panel5/8”Open positionMotion panelMotion panelFixed panel2 1/4”Top view looking downMotion panelRoom side (inside)Motion panelWand option - Fixed and motion panels are reversed when usingthe option. For split draw tracks, there are two (2) wands - bothsides operate independently.Specifications 3 - Channel track 3 PanelsMinimum Width 48"Maximum Width 108"Minimum Length 30"Maximum Length 102"IB DeductionsWidth - 1/4"Length - 3/8"OB DeductionsWidth - NoneLength - NoneCord OptionsOne-Way Left Left StackOn-Way Right Right Stack3 PanelsWand OptionsOne-Way Left Left StackOn-Way Right Right Stack3 Panels7/10

Melhanna Roller ShadesTrack Profiles: Panel Track - 4 Channels - 4 or 6 PanelsF17Panel Tracks5/8”Top view looking downClosed positionMotion panelMotion panelMotion panelClosed positionMotion panelFixed panelOpen positionMotion panelMotion panelFixed panelTop view looking downMotion panel2 15/16”Room side (inside)Motion panelRoom side (inside)Motion panelFixed panelOpen positionMotion panelMotion panelMotion panelFixed panelFixed panelMotion panelMotion panelFixed panelSpecifications 4 - Channel track 4 or 6 PanelsMinimum Width 66"Maximum Width 192"Minimum Length 30"Maximum Length 102"IB DeductionsWidth - 1/4"Length - 3/8"OB DeductionsWidth - NoneLength - NoneCord OptionsSplit DrawCord RightCord Left6 PanelsOne-Way LeftLeft StackOn-Way Right Right Stack4 PanelsWand OptionsSplit Draw 1 left, 1 right 6 PanelsOne-Way LeftLeft StackOn-Way Right Right Stack4 PanelsWe can create an overlap for 2 to 4 channelcord draw tracks if you choose to butt twopanel tracks together (ie, 1 stack left,butting to 1 stack right). This must be specifiedat the time the order is placed. It cannotbe done after the order has been manufactured.Please note that all panels will have a slightcupping effect (curving in toward the windowat the panel edges). Blackout and Dim-Out fabrics will have cupping to a greaterdegree than light filtering patterns.Grasscloth fabrics will have the least cuppingand are ideally suited for Panel Trackapplications.Track Profiles: Panel Track - 5 Channels - 5 Panels5/8”Closed positionFixed panelOpen positionMotion panelMotion panelMotion panelMotion panelFixed panelTop view looking downMotion panel3 5/8”Motion panelRoom side (inside)Motion panelMotion panelNOTE: Wand option - Fixed and motion panels are reversedwhen using the option. For split draw tracks, there are two (2)wands - both sides operate independently.Specifications 5 - Channel track 5 PanelsMinimum Width 66"Maximum Width 192"Minimum Length 30"Maximum Length 102"IB DeductionsWidth - 1/4"Length - 3/8"OB DeductionsWidth - NoneLength - NoneCord OptionsOne-Way Left Left StackOn-Way Right Right Stack5 PanelsWand OptionsOne-Way Left Left StackOn-Way Right Right Stack5 PanelsRoller Shades7/10

F18Exploded ViewsPanel TrackMelhanna Roller ShadesAll roller shade panel track panels will have a slight cupping(curvature) on the edges of each panel as well as panel lengthdiscrepancies due to fabric stretch. This is especially true forroom darkening fabrics. These are inherent characteristics ofthis product and are considered acceptable. To lessen the effectsof the cupping, wood accents could be used.3.5mm CordingPanelCarrierGuide forPanel CarrierGliderGliderSwivelInstallationBracketStop ScrewPilot runnerSimple Angle andDouble AngleCord EndGuideCord EndGuideAluminum Track - white finish2, 3, 4 and 5 channelsBottom Hem Weight BarsRoller ShadesStack = Amount of spaceCO = Size required to completelyrequired for product stack Panel Track Stacking Chart stack clear of opening.Ordered 2 Panel 1-way 3 Panel 1-way 4 Panel 1-way 4 panel Split-draw 5 Panel 1-way 6 panel Split-drawWidth Stack CO Stack CO Stack CO Stack CO Stack CO Stack CO48 27 19 76.554 30 21 85.560 33 23 94.566 36 25 103.5 19.5 92 39 144 16 86 25 10872 39 27 21 100 42 156 17 94 27 11778 42 29 22.5 108 45 168 19 101 29 12684 45 31 24 116 48 180 20 109 31 13590 33 25.5 124 51 192 21 116 33 14496 35 27 132 54 22 124 35 153102 37 28 140 57 23 131 37 162108 39 30 148 60 25 139 39 171114 31.5 156 63 26 146 41 180120 33 164 66 27 154 43 189126 34.5 172 69 28 161 45132 36 180 72 29 169 47138 37.5 188 75 31 176 49144 39 78 32 184 51150 40.5 81 33 191 53156 42 84 34 55162 43.5 87 35 57168 45 90 37 59174 46.5 93 38 61180 48 96 39 63186 49.5 99 40 65192 51 102 41 677/10