GENERAL CATALOGUE - Urmet

WIRED INTRUSION ALARM SYSTEMS
1033/211
1033/207
1033/209
ROBBERY ALARM BUTTON
1033/211 NC buttons for robbery alarm
- ABS material
- Working temperature range: -10 +50°C
- Contact: normally closed
- Dimensions: 56 (W) x 30 (H) x 56 (D) mm
ROLLING SHUTTER CONTACTS
1033/207 Electromechanical wire contact for rolling shutters
- Detects the lifting, tearing or cutting of rolling shutters.
- Installed in the rolling shutter box. The rolling shutter can be stopped
in any position. For use with interface board 1033/209.
- Beige thermoplastic material
- Connection 2 wires 10 cm
- Cross-section area 0.35 mm square
1033/209 Interface board for 1033/207
- For programming the number of pulses before the alarm
- Max. 6 contacts 1033/207 per board
- Power: 10 - 15 Vdc
- Maximum stand-by consumption: 22 mA @ 12 Vdc
- Maximum alarm consumption: 7 mA @ 12 Vdc
- Sensitivity adjustment: by means of trimmer P1
- Alarm pulse time: 1.5 ± 0.5 s
- NC and NO switching relay contact positive safety
- Maximum applicable voltage: 24 Vdc
- Maximum applicable current: 1 A with resistive load
• 233
WIRED INTRUSION
ALARM SYSTEMS