GENERAL CATALOGUE - Urmet

Video transmission
via UTP wire
210 •
VIDEO TRANSMISSION
Multiband network video signal
transmissions
1092/300A
Wireless video
transmission
CAT5 VIDEO TRANSMISSION
From video transmission on UTP cable
(balun devices) to two wireless solutions,
remote wave or via Mult-iband radio network:
Urmet technology offers three different solutions
for managing the best system design
for your needs.
Video balun (Balanced-Unbalanced) devices exploit UTP CAT5 twisted wires for transmitting
video signals. The great advantages of this type of transmission with respect to coax cable
installations include further wiring distances (max. 3000 m), purchasing ease of the CAT5
cable, possibility of using a single wire for transmitting 4 video signals (by means of the four
twisted pairs contained in the CAT5 wire), higher lightening immunity and electromagnetic
inductions. Easy, cost-effective installation - combined with high-performance products - make
the Urmet Domus Balun range an ideal solution for all system types.
1092/300A Balun passive TX/RX video pair
Pair of passive balun videos (without signal amplification) allow to adapt
the impedance between coax and UTP cable. They are particularly suitable
for transmitting and receiving video signals (black and white or colour) on UTP
(Unshielded Twisted Pair) wires.
- Compact dimensions for rapid connection to video management apparatuses,
monitors and cameras.
- 1 BNC video input and terminal board for connecting to UTP CAT5 wire
- Very easy to use
- No power needed.
- Double impedance and interference filter for ensuring better protection
from interference.
- Pair of transceivers included.