GENERAL CATALOGUE - Urmet

PAN AND TILT AND POWER SUPPLY UNITS
184 •
1090/726
1090/729
1090/868
1090/829
VIDEO DISTRIBUTION
1090/726 1 input/ 4 output video distributor
1090/727 1 input/ 8 output video distributor
Common features and performance
- Power: 230 Vac
- S/R ratio: › 55 dB
- Weight: 2.2 kg
- Dimensions: 216 (W) x 44 (H) x 240 (D) mm
1090/730 Miniature video distributor
Used for distributing video signal from one camera to up to 4 monitors.
Very small, may be wall mounted or fitted inside a junction box.
Must be powered by power unit 1090/850 using the 12 Vdc output
without adapter.
- Power: 15 Vdc 30 mA
- Connections: no BNC connectors required
- Dimensions: 96 (W) x 28 (H) x 65 (D) mm
VIDEO AMPLIFIERS
1090/729 1 input/ 1 output video amplifier
- Video input: 1
- Video output: 1
- Linear gain: › 13dB
- Power: 230 Vac
- Weight: 2.2 kg
- Dimensions: 216 (W) x 44 (H) x 240 (D) mm
FREQUENCY SYNTHESIS MODULATOR
1090/868 Frequency synthesis modulator
The modulator converts the video signal from a camera into a radio frequency
signal compatible with a television antenna input. The device is provided
with connectors for being fitted on the existing antenna wire and occupying
a spare television channel. The camera signal may be called up on screen
with the selection fo the dedicated channel.
- Power: 230 Vac
- Adjustable audio and video by means of trimmer
- Output channel selection band I or band II or hyperband IV or V by means
of dip switch
- Adjustable RF output level
VIDEO POWER UNIT
1090/829 Power unit 230 Vac - 12 Vdc
- Suitable for all B/W and colour cameras. Suitable for mounting in casings
1090/820 - /821 - /822 - /809with the accessory provided.
- Input voltage: 230 Vac
- Output voltage: 12 Vdc 400 mA
- Weight: 400 g
- Dimensions: 82 (W) x 72 (H) x 35 (D) mm