GENERAL CATALOGUE - Urmet

138 •
1332/85
1332/82
1382/21
PROTECTIONS, FILTERS
and system accessories
PROTECTIONS AND FILTERS
1332/80 Power line protection device, 230Vac, 400 VA
For maximum efficiency, install the protection on the power line near the device
to be protected. The device will trip in presence of dangerous current surges
on the power line. Max. current 2A. Max. load: 400VA. Installation: wall mounted
on DIN bar, 2 modules. Dimensions: 36 (W) x 104 (H) x 75 (D) mm.
1332/85 230Vac 4000VA power line protection device
For maximum efficiency, install the protection on the power line near the device
to be protected. The device will trip in presence of dangerous current surges
on the power line. Use with Ref. 1332/86 filter recommended because
their action is complementary. Max. current 20A Max. load: 4000VA
Installation: DIN bar, 2 modules. Dimensions: 36 (W) x 90 (H) x 58 (D) mm.
1332/86 Power line filtering device, 230Vac, 4000 VA
The device prevents the propagation of radio-frequency interference on the power
network which could cause faults to electronic apparatus sensitive to such
interference. For better results, use with protection device Ref. 1332/85
is recommended to exploit their complementary action.
Power: 230Vac - 50Hz Attenuation: 60dB @ 2MHz. Max. current 20A
Max. load: 4000VA Installation: DIN bar, 2 modules.
Dimensions: 36 (W) x 90 (H) x 58 (D) mm.
1332/81 Protection device for 1 analogue telephone line
For maximum efficiency, install the protection on the power line near the PABX
to be protected. Specifically, the device must be installed on all dial and extension
lines connecting out of the building or to which electrical devices, such as fax
machines, modems, answering machine, cordless telephones, etc. are connected.
The device will trip in presence of dangerous current surges on the line.
Installation: wall mounted or DIN bar mounted, 2 modules.
Dimensions: 36 (W) x 104 (H) x 75 (D) mm.
1332/82 Protection device for 2 analogue telephone lines
For maximum efficiency, install the protection on the power line near the PABX
to be protected. Specifically, the device must be installed on all dial and extension
lines connecting out of the building or to which electrical devices, such as fax
machines, modems, answering machine, cordless telephones, etc. are connected.
The device will trip in presence of dangerous current surges on the line.
Installation: wall mounted or DIN bar mounted, 2 modules.
Dimensions: 36 (W) x 104 (H) x 75 (D) mm.
1382/21* Protection device with ADSL 2+ filter
The device integrates the functions of a telephone line surge protection
and of a professional ADSL 2 filter (splitter). For maximum efficiency,
install the protection on the power line near the PABX to be protected.
The device will trip in presence of dangerous current surges on the line.
Installation: wall mounted on DIN bar, 2 modules.
Dimensions: 36 (W) x 104 (H) x 75 (D) mm.
* Available from June ‘09