Edge Evolution Programmer Installation Instructions ... - Edge Products

Evolution06 LBZ & LLY DuramaxWarning: The Evolution employs carefully modified strategies that are designed tobe utilized on unmodified (stock) vehicles only.Many aftermarket components such as cold air intake (CAI) kits, exhaust systems,and throttle body spacers as well as forced induction systems (turbochargers,superchargers, nitrous oxide, etc) alter the calculated airflow characteristics of theengine. In addition, mechanical modifications to the engine such as displacementchanges, camshaft modification, and cylinder head modification may alter calculatedairflow characteristics.Using any of these modifications (either alone or in any combination) in conjunctionwith the Evolution is NOT RECOMMENDED as it may cause an excessively leancondition which could result in engine damage.Edge Products will not be responsible for any damages caused by using theEvolution on a vehicle that has been modified from a stock configuration.If you have used another tuner/programmer on your vehicle, you will need toprogram back to stock and remove the device before using the Edge ProductsDevice.Failure to return to stock may result in PCM failure or engine damage.About the EvolutionCongratulations on purchasing the Evolution by Edge Products, LLC, theleader in truck performance and power gain technology. The followingmanual contains information and instructions on the proper use of theEvolution. Please read carefully before proceeding to program your vehicle.Note: Read the product disclaimer and the Getting Connected section beforeprogramming your vehicle.Note: At the back of this manual, we have included commonly usedacronyms. This should help while using the Evolution.Stock ProgramThe Evolution automatically makes a backup of your stock program fromyour PCM before writing a new program onto your PCM. This assures thatyou will have the stock program if/when you desire to reprogram yourvehicle to its original stock program.7