Edge Evolution Programmer Installation Instructions ... - Edge Products

06 LBZ & LLY Duramax Evolution IAT (Intake Air Temperature in manifold) – Degrees F. DFRP (Desired Fuel Rail Pressure) – PSI – This is what pressure thePCM would like the fuel rail pressure to be at. AFRP (Actual Fuel Rail Pressure) – PSI – This is the actual pressure inthe fuel rail. MAP (Manifold absolute Pressure) - kPa MIT (Main Injection Timing) - Degrees BAT (Battery voltage) - Volts CFR (Calculated Fuel Rate) – mm3 VPOS (Turbo Vane Position) - % Throttle Percent (Accelerator Pedal Position) - % IATT (Intake Air Temperature in intake tube) – Degrees F BARO (Barometric Pressure) - kPa FTMP (Fuel Temperature) - Degrees F DIDL (Desired Idle) - RPM EGT (Exhaust Gas Temperature) – Degrees F OSS (Output Shaft Speed) - RPMChanging the BacklightingAdjusting the Backlight ColorTo change the backlighting color, perform the following steps:1. From the Main Menu select the Setup option. The Setup screen appearsas follows:32