Edge Evolution Programmer Installation Instructions ... - Edge Products

Evolution06 LBZ & LLY DuramaxClearing CodesIf you want to clear the DTCs on your vehicle, select the Clear DTCs option.After selecting the Clear DTCs option, any current stored DTCs will becleared from your vehicle and the “Check Engine” light will go out.However, if you do not address the issue that originally caused the DTC, theDTC will set again and the “Check Engine” light will come back on. Oncethe DTCs have been cleared, press [ENTER] to return to the previous menu.Injector Balance RatesInjector balance rates can give you vital information to indicate a bad batchof fuel or possibly excessive injector wear. Balance rates should be between+4mm and -6.9mm in park or neutral.Tech SupportInformation found in this section is normally only accessed when instructedby an Edge support person. For example, Version Info displays the currentBootloader, Firmware, and Calibration versions installed on your Evolution.Your vehicle’s HEX code is also shown. Using the Fusion® software, you25