Edge Evolution Programmer Installation Instructions ... - Edge Products

Evolution06 LBZ & LLY DuramaxThe other four boxes can show up to 4 PIDs (Parameter IDs) of yourvehicle. By default, they are your vehicle’s RPM, BST (boost), TFT(transmission fluid temperature), and EGT (exhaust gas temperature).Optional parameters and display formats may be selected in theChanging Display section of this manual.10. From this display, press [MENU] to select and use other features of theEvolution. The display backlight brightness can also be controlled fromthis display by using the [UP] and [DOWN] arrow keys.Power Programming"Caution: Vehicle manufacturers do not recommend vehicle programming inextreme temperature. Please see the service manual of your vehicle to ensure thatprogramming is being done in accordance to the original equipment manufacturersspecifications."From the main screen, press [MENU] to enter the main menu. Then selectPower Programming. The following screen appears:1. Select the level that best meets your needs. For more informationabout each level, refer to the About the Evolution section in thismanual. Confirm your selection by pressing [ENTER] on thefollowing screen. After confirming, the evolution will prepare thestock files, save the stock files, and then the screen below will appear:19