MicroDAC 5 User's Manual - Digital Audio Corporation
MicroDAC 5 User's Manual - Digital Audio Corporation MicroDAC 5 User's Manual - Digital Audio Corporation
Figure 5-6: Mono 4CH5.6.2 Stereo ConfigurationsTo configure the unit for a stereo signal, click the “Channels” menu and select the“Stereo” sub-menu, as shown in Figure 5-7.Page 16
Figure 5-7: Stereo sub-menuIn stereo mode, there are three options available, two of which are shown in thefollowing figures: 1CH: This places an additional 1-CH filter on both the Left and RightInputs and provides no reference cancellation. 2CH: Reference for both signals is LRef Input (see Figure 5-8) 3CH: References for both signals are LRef and RRef Inputs (see Figure5-9)Page 17
- Page 1: Multi-Channel Reference CancellerUS
- Page 7: 1 Overview1.1 IntroductionMicroDAC
- Page 11: 3 Standalone ControlsControls on th
- Page 14 and 15: 3.1.4.5 Clear FiltersUse the CLEAR
- Page 16 and 17: Audio Output (1):o TOSLINK optical
- Page 18 and 19: 5.3 FiltersFour different filters a
- Page 20 and 21: Figure 5-3: Mono sub-menuIn mono mo
- Page 25 and 26: 5.6.3 Audio Line Out ConfigurationB
- Page 27 and 28: are stored in nonvolatile memory on
- Page 29 and 30: they are “out.” Taking one of t
- Page 31 and 32: 6 FiltersTo configure a specific fi
- Page 33 and 34: samples and in milliseconds. Minimu
- Page 35 and 36: Slower adapt rates take longer to r
- Page 37 and 38: Figure 6-4: Automatic Gain Control
- Page 39 and 40: 7 InstallationTo install the MicroD
- Page 41 and 42: 3. After the .NET install completes
- Page 43 and 44: 7. Next, before running the MicroDA
- Page 45 and 46: d. Once the driver has finished ins
- Page 47 and 48: 3. You will be presented with a “
- Page 49 and 50: 7. You may see another “unidentif
Figure 5-7: Stereo sub-menuIn stereo mode, there are three options available, two of which are shown in thefollowing figures: 1CH: This places an additional 1-CH filter on both the Left and RightInputs and provides no reference cancellation. 2CH: Reference for both signals is LRef Input (see Figure 5-8) 3CH: References for both signals are LRef and RRef Inputs (see Figure5-9)Page 17
Change language