150N Automatic Lifejacket with integral Deck Harness

Fig. 22. Make sure the manual lever is in theup and ready position. Install the CO2cylinder into the inflator by screwing ituntil hand-tight (Fig.2). Check that theautomatic capsule has not been fired byensuring that the bottom indicator isshowing green.Fig. 33. Check that the oral-inflation tubecap is in stowed position B (Fig.3).A Dust cap in deflate positionB Dust cap in stowed positionABFig. 44. Ensure the cord runs freelyfrom the firing head to theeyelet in the cover. Re-fastenthe zipper. If everythingconforms to the precedinginstructions, your lifejacketis ready for use. Re-run thezip back around the cover toclose (Fig.4).14