FO LISA Ducting System - Composites

OPTICAL FIBER DUCTINGLISAOptical Fiber DuctingDescriptionLightpath Optical Fiber Ducting system is designed to ensure network integrity and to satisfy the requirements for Optical Fiberstress relief: 30 mm bending radius, distribution flexibility and protection from damage due to external causes. The ductingis manufactured from a halogen free fire retardant plastic known as NORYL and is available in 4 sizes. Each size hasmany different components, such as: tee pieces, elbows, reducing adapters etc. All individual components have lids availableto ensure cable protection. The ducting is supported in position by steel brackets and threaded rods which bolt to theexisting equipment room bracing.Features• Flexible tube and vertical ducting provide access to multiple Fiber Optic Transmission System Equipment within a rack.• A range of components is available to allow the system to be easily installed in both old and new overhead and undergroundexchange situations.• Available in four sizes: 30, 50, 100 and 220 mm• Ducting length: 2000 mm (standard)SUHNER FIBEROPTIC3

DUCTING RACEWAY SIZEThe listed cable capacities are recommended to ensure no damage will occur to the cables due to crushing.Type Size/mm 30 x 30 50 x 50 100 x 50 100 x 100 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 2" 4" x 4" 8" x 4" 12" x 4"Cable diameter/mm 3 2- 1.6- 3 2- 1.6- 3 2- 1.6- 3 2- 1.6- 3 2- 1.6- 3 2- 1.6-2.4 2 2.4 2 2.4 2 2.4 2 2.4 2 2.4 2Capacity 45 55 90 120 145 240 280 350 570 500 630 1000 800 1000 1650 1650 2100 3400Straight ductRacewaySTRAIGHT DUCTING RACEWAYGeneral InformationLISAThe Lightpath ducting system is available in six sizes with or withoutcovers. All duct sizes come in 2.0 meter (6.5") lengths,and where required, are slotted at each end to simply snap togetherwith appropriate joiners.Additionally three different slotted raceways are available forvertical drops or inside rack applications to allow cablesthrough the side of the duct.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size in Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"Solid duct - - - - - -with cover TC1279-83XA TC1279-81XA - - - TC1279-275Awith hinged cover - - TC1279-23A TC1279-223A TC1279-21A -Slotted duct - - - - - -with cover TC1279-83SLXA TC1279-81SLXA TC1279-23SLXA - - -with hinged cover - - - - - -4SUHNER FIBEROPTIC

DUCTS WITH LIDSOrdering information Part No UnitDimensions (WxHxL)Duct & Lid, 300mm TC1279-275A 1300 x115 x 2000 mmDuct & Lid, 220mm TC1279-21A 1220 x105 x 2000 mmDuct & Lid, 100mm TC1279-23A 1100 x105 x 2000 mmDuct & Lid, 100 x 50mm TC1279-223A 1100 x 50 x 2000 mmDucts with lidsDuct & Lid, 50mm TC1279-81XA 150 x 50 x 2000 mmLISADuct & Lid, 30mm TC1279-83XA 130 x 30 x 2000 mmSlotted Duct & Lid, 100mm TC1279-23SLXA 1100 x105 x 2000 mmSUHNER FIBEROPTIC5

DUCTS WITH LIDSOrdering information Part No UnitDimensions (WxHxL)Slotted Duct & Lid, 50mm TC1279-81SLXA 150 x 50 x 2000mmSlotted Duct & Lid, 30mm TC1279-83SLXA 130 x 30 x 2000mmLISADucts with lids6SUHNER FIBEROPTIC

JOINERSJoiners are used to snap together ducting components and straight ductingraceways. They simply snap into the slots at the end of each pieceto be joined. For straight ducting raceways which have been cut tolength, new slots need to be made with a suitable slotting tool.Slotless joiners are available in different sizes and will join the ducting raceway components with or without slots.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"Joiners, requires slots TC1279-98 TC1279-73 TC1279-27 TC1279-226 TC1279-25Slotless joiners TC1279-248A TC1279-258A TC1279-250A TC1279-287AOrdering information Part No UnitDimensions (WxHxL)Joiner, 220mm TC1279-25 143 x 94 x 232mmJoiner, 100mm TC1279-27 143 x 94 x 112mmJoinersLISAJoiner, 100 x 50mm TC1279-226 143 x 44 x 111 mmJoiner, 50mm TC1279-73 125 x 47 x 56 mmSUHNER FIBEROPTIC7

JOINERSOrdering information Part No UnitDimensions (WxHxL)Joiner, 30mm TC1279-98 125 x 28 x 36 mmSlotless Joiner, 300mm TC1279-287A 150 x 100 x 234 mmSlotless Joiner, 220mm TC1279-250A 150 x 100 x 246 mmSlotless Joiner, 100mm TC1279-248A 150 x 100 x 100 mmJoinersSlotless Joiner, 100 x 50mm TC1279-258A 11100 x105 x 2000 mmLISA8SUHNER FIBEROPTIC

VERTICAL TEESVertical tees are used to drop cables vertically from horizontal routesinto frames or cabinets. Slotted tees are used where cables are alreadyin place. All vertical tees are delivered with cover.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"50 x 50mm drop - TC1279-145A - - - -& Cover50 x 50mm drop - TC1279-145R - - - -& Cover & Slotted100 x 100mm drop - - TC1279-63A - - -& Cover100 x 100mm drop - - TC1279-63R - - -& Cover & Slotted100 x 50mm drop TC1279-228A& Cover100 x 100mm drop - - - - TC1279-11A -& Cover100 x 100mm drop - - - - TC1279-11R-& Cover & Slotted220 x 100mm drop - - - -- - TC1279-277A& CoverVertical TeesOrdering information Part No UnitDimensions (WxHxL)Vertical Tee, 300mm TC1279-277A 1220x100 drop370 x 150 x 312mmLISAVertical Tee, 220mm TC1279-11A 1100x100 drop370 x 205 x 232mmSUHNER FIBEROPTIC9

VERTICAL TEESOrdering information Part No UnitDimensions (WxHxL)Vertical Tee, 100mm TC1279-63A 1100x100 drop205 x 150 x 113mmVertical Tee, 50mm TC1279-145A 150x50 drop90 x 53 x 128 mmSlotted Vertical Tee, 220mm TC1279-11R 1100x100 drop370 x 205 x 232 mmVertical TeesSlotted Vertical Tee, 100mm TC1279-63R 1100x100 drop205 x 150 x 113 mmLISASlotted Vertical Tee, 50mm TC1279-145R 150x50 drop92 x 53 x 128 mm10SUHNER FIBEROPTIC

HORIZONTAL TEESHorizontal tees are used to branch off the main route.All tees will be delivered with cover.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"Horizontal Tee TC1279-115A TC1279-75A TC1279-03A TC1279-224A TC1279-01A TC1279-279A& CoverHorizontal Tee - - - - TC1279-09A -& Cover 220 - 100Ordering information Part No UnitDimensions (WxHxL)Horizontal Tee, 300mm TC1279-279A 1405 x 114 x 358mmHorizontal Tee, 220mm TC1279-01A 1360 x 105 x 299mmLISAHorizontal TeesHorizontal Tee, 100mm TC1279-03A 1246 x 105 x 180mmHorizontal Tee, 100 x 50mm TC1279-224A 1200 x 55 x 153mmSUHNER FIBEROPTIC11

HORIZONTAL TEESOrdering information Part No UnitDimensions (WxHxL)Horizontal Tee, 50mm TC1279-75A 1128 x 55 x 91mmHorizontal Tee, 30mm TC1279-115A 1110 x 35 x 72mmHorizontal Tee, 220mm TC1279-09A 1220-100mm250 x 105 x 300mLISAHorizontal Tees12SUHNER FIBEROPTIC

HORIZONTAL CROSSESUsed to provide cross intersections in straight ducts. Reduction crossesare available to join horizontal ducts with different sizes.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"Horizontal Cross - TC1279-139A TC1279-71A - TC1279-61A -& CoverHorizontal Cross - - - - TC1279-65A -& Cover 220 - 100Horizontal Cross - - TC1279-234A - - -& Cover 100 - 50Ordering information Part No UnitDimensions (WxHxL)Horizontal Cross, 220mm TC1279-61A 1360 x 105 x 360 mmHorizontal CrossesHorizontal Cross, 100mm TC1279-71A 1246 x 105 x 246 mmLISASUHNER FIBEROPTIC13

HORIZONTAL CROSSESOrdering information Part No UnitDimensions (WxHxL)Horizontal Cross, 50mm TC1279-139A 1128 x 55 x 128 mmHorizontal Cross, 220 - 100mm TC1279-65A 1246 x 105 x 370mmHorizontal CrossesHorizontal Cross, 100 - 50mm TC1279-234A 1200 x 55 x 200mmLISA14SUHNER FIBEROPTIC

HORIZONTAL ELBOWSHorizontal elbows are used to change the direction of horizontal routes.All elbows are delivered with cover.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"30° & Cover - TC1279-77-30A TC1279-31-30A - TC1279-29-30A -45° & Cover - TC1279-77-45A TC1279-31-45A - TC1279-29-45A -90° & Cover TC1279-137A TC1279-77A TC1279-31A TC1279-269A TC1279-29A TC1279-304AKITOrdering information Part No UnitDimensions (WxHxL)Horizontal Elbow, 30°, 220mm TC1279-29-30A 1167 x 105 x 245mmHorizontal Elbow, 30°, 100mm TC1279-31-30A 1107 x 105 x 123mmHorizontal ElbowsHorizontal Elbow, 30°, 50mm TC1279-77-30A 153 x 55 x 59mmLISAHorizontal Elbow, 45°, 220mm TC1279-29-45A 1218 x 105 x 241 mmHorizontal Elbow, 45°, 100mm TC1279-31-45A 1135 x 105 x 126 mmSUHNER FIBEROPTIC15

HORIZONTAL ELBOWSOrdering information Part No UnitDimensions (WxHxL)Horizontal Elbow, 45°, 50mm TC1279-77-45A 167 x 55 x 67 mmHorizontal Elbow, 90°, 300mm TC1279-304AKIT 1340 x 115 x 282 mmHorizontal Elbow, 90°, 220mm TC1279-29A 1305 x 105 x 305 mmHorizontal ElbowsHorizontal Elbow, 90°, 100mm TC1279-31A 1181 x 105 x 181 mmHorizontal Elbow, 90°, 50mm TC1279-77A 191 x 55 x 91mmLISAHorizontal Elbow, 90°, 30mm TC1279-137A 171 x 33 x 71mm16SUHNER FIBEROPTIC

VERTICAL ELBOWSTo connect horizontal routes at different heights or to allow the fiber pathto be raised or lowered avoiding obstacles. Slotted elbows are usedwhere the fibers already exist.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"30°, Down & Cover - - TC1279-111-30A - TC1279-123-30A -30°, Up & Cover - - TC1279-113-30A - TC1279-125-30A -45°, Down & Cover - TC1279-87-45A TC1279-111-45A - TC1279-123-45A TC1279-285A45°, Up & Cover - - TC1279-113-45A - TC1279-125-45A -90°, Down & Cover TC1279-135A TC1279-87A TC1279-111A TC1279-236A TC1279-123A TC1279-296KIT90°, Up & Cover - TC1279-143A TC1279-113A TC1279-246A TC1279-125A TC1279-298KIT90°, Up & Down - - TC1279-39A - TC1279-37A -Ordering information Part No UnitDimensions (WxHxL)Vertical Elbow, 30° Down, 220mm TC1279-123-30A 1106 x 90 x 212mmLISAVertical ElbowsVertical Elbow, 30° Up, 220mm TC1279-125-30A 1110 x 93 x 212mmVertical Elbow, 30° Down, 100mm TC1279-111-30A 1126 x 107 x 107mmVertical Elbow, 30° Up, 100mm TC1279-113-30A 1123 x 110 x 106mmSUHNER FIBEROPTIC17

VERTICAL ELBOWSOrdering information Part No UnitDimensions (WxHxL)Vertical Elbow, 45° Down TC1279-285A 1300mm312 x 112 x 162mmVertical Elbow, 45° Up TC1279-283A 1300mm312 x 112 x 162mmVertical Elbow, 45° Down TC1279-123-45A 1220mm115 x 128 x 212mmLISAVertical ElbowsVertical Elbow, 45° Up TC1279-125-45A 1220mm113 x 134 x 212mmVertical Elbow, 45° Down TC1279-111-45A 1100mm160 x 160 x 110mmVertical Elbow, 45° Up TC1279-113-45A 1100mm130 x 130 x 106mm18SUHNER FIBEROPTIC

VERTICAL ELBOWSOrdering information Part No UnitDimensions (WxHxL)Vertical Elbow, 45° Down TC1279-87-45A 150mm66 x 60 x 55mmVertical Elbow, 90° Down TC1279-296KIT 1300mm320 x 135 x 302mmVertical Elbow, 90° Up TC1279-298KIT 1300mm322 x 135 x 257mmVertical Elbow, 90° Down TC1279-123A 1220mm225 x 190 x 190 mmVertical ElbowsVertical Elbow, 90° Up TC1279-125A 1220mm175 x 175 x 224 mmLISAVertical Elbow, 90° Up & Down TC1279-37A 1220mm175 x 226 x 175 mmSUHNER FIBEROPTIC19

VERTICAL ELBOWSOrdering information Part No UnitDimensions (WxHxL)Vertical Elbow, 90° Down TC1279-236A 1100 x 50mm106 x 106 x 106 mmVertical Elbow, 90° Up TC1279-246A 1100 x 50mm106 x 106 x 110 mmVertical Elbow, 90° Down TC1279-111A 1100mm170 x 170 x 110 mmVertical ElbowsVertical Elbow, 90° Up TC1279-113A 1100mm175 x 175 x 106 mmVertical Elbow, 90° Up & Down TC1279-39A 1100mm174 x 174 x 106mmLISAVertical Elbow, 90° Down TC1279-87A 150mm90 x 90 x 45mmVertical Elbow, 90° Up TC1279-143A 150mm90 x 90 x 53mmVertical Elbow, 90° Down TC1279-135A 130mm73 x 73 x 33mm20SUHNER FIBEROPTIC

HORIZONTAL CENTERING ADAPTERSHorizontal adapters are used to provide a method of aligning ducts. Allcentering adapters will be delivered with cover.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"Centering Adapter, 2x30° - - TC1279-47A - TC1279-45A -Ordering information Part No UnitDimensions (WxHxL)Centering Adapter TC1279-45A 12x30°, 220mm218 x 105 x 295mmCentering Adapter TC1279-47A 12x30°, 100mm158 x 105 x 155 mmHorizontal centering adaptersLISASUHNER FIBEROPTIC21

FIBER STORAGE LOOPSUsed for safety storage of excess fiber length. Placed in any horizontalroute or inside cabinets. Available as inline or offset version.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"Inline & Cover - TC1279-209KIT TC1279-208KIT - TC1279-207KIT -Offset & Cover TC1279-178KIT TC1279-192KIT TC1279-191KITFiber storage loopsOrdering information Part No UnitDimensions (WxHxL)Fiber Storage Loop TC1279-191KIT 1Offset, 220mm660 x 105 x 600 mmFiber Storage Loop TC1279-207KIT 1Inline, 220mm785 x 105 x 600 mmLISAFiber Storage Loop TC1279-192KIT 1Offset, 100mm420 x 105 x 370mm22SUHNER FIBEROPTIC

FIBER STORAGE LOOPSOrdering information Part No UnitDimensions (WxHxL)Fiber Storage Loop TC1279-208KIT 1Inline, 100mm420 x 105 x 370mmFiber Storage Loop TC1279-178KIT 1Offset, 50mm260 x 54 x 190mmFiber Storage Loop TC1279-209KIT 1Inline, 50mm270 x 54 x 195mmFiber storage loopsLISASUHNER FIBEROPTIC23

END COVERSTo close the end of a horizontal or vertical route.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"End Cover, slotless - - TC1279-251 - TC1279-252 TC1279-288End Cover, - - TC1279-57 - TC1279-56 -without knock-outEnd Cover, TC1279-127 - - - -2x20 knock-outEnd Cover, TC1279-128 - - - - -1x17 knock-outEnd Cover,Tube 32ID/38ODTC1279-128DEnd coversEnd Cover, TC1279-128D - - - -Tube 44ID/50ODOrdering information Part No UnitDimensions (WxHxL)End Covers for unslotted ductsLISAEnd Cover, slotless, 300mm TC1279-288 1300 x 114 x 28 mmEnd Cover, slottless, 220mm TC1279-252 1226 x 114 x 28 mmEnd Cover, slotless, 100mm TC1279-251 162 x 114 x 28 mm24SUHNER FIBEROPTIC

END COVERSOrdering information Part No UnitDimensions (WxHxL)End Covers slotted ductsEnd Cover, 220mm TC1279-56 125 x 95 x 232 mmEnd Cover, 100mm TC1279-57 125 x 95 x 112 mmEnd Covers with tube outlets (for slotted ducts)End Cover, 50mm TC1279-127 1with 2x20mm knock-outs14 x 47 x 60 mmEnd coversEnd Cover, 30mm TC1279-128 1with 1x17mm knock-out14 x 28 x 36 mmLISAEnd Cover, 50mm TC1279-127D 1with tube outlet 44 ID/50mm OD40 x 47 x 60 mmEnd Cover, 30mm, TC1279-128D 1with tube outlet for 32 ID/38mm OD32 x 33 x 36 mmSUHNER FIBEROPTIC25

ADAPTER ASSEMBLIESAdapter Assemblies allow different size ducts to be joint together.Type Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"Reducer & Cover TC1279-97A TC1279-91A TC1279-240A TC1279-238A TC1279-281AReducer & Cover,right-handReducer & Cover,left-handTC1279-05ATC1279-07AOrdering information Part No UnitDimensions (WxHxL)Adaptor Assembly TC1279-281A 1300 x 100mm to 220 x 100mm311 x 113 x 133mmAdapter assembliesAdaptor Assembly TC1279-238A 1100 x 50mm to 50 x 50mm82 x 55 x 106mmLISAAdaptor Assembly TC1279-240A 1100x10mm to 100x50mm52 x 105 x 110mmAdaptor Assembly TC1279-91A 1100x100mm to 50x50mm82 x 105 x 107mmAdaptor Assembly TC1279-97A 150x50mm to 30x30mm64 x 55 x 60mm26SUHNER FIBEROPTIC

ADAPTER ASSEMBLIESOrdering information Part No UnitDimensions (WxHxL)Adaptor Assembly, right-hand TC1279-05A 1220 x 100mm to 100 x 100mm215 x 105 x 233mmAdaptor Assembly, left-hand TC1279-07A 1220 x 100mm to 100 x 100mm215 x 105 x 233mmLISAAdapter assembliesSUHNER FIBEROPTIC27

SIDE DROP-OFF KITSThese components provide different methods of allowing fiber to enterthe ducting system.Ordering information Part No UnitDimensions (WxHxL)90° downDrop-Off Kit for 300, 220, 100 TC1279-41A 1100x50 and 50mm ductsDrop-Off roundfor 44mm ID/50mm OD branch tube198 x 103 x 78 mmSide drop-off kitsDrop-Off Kit for 300, 220 and TC1279-41KIT 1100 x 50mm ductsDrop-Off, round with rampfor 44mm ID/50mm OD branch tube210 x 103 x 80mmLISADrop-Off Kit for 50mm duct TC1279-89A 1Drop-Off Kit, squarefor 50 x 50mm branch tube110 x 95 x 90 mmDrop-Off Kit TC1279-89KIT 1for 300, 220 and100 x 100mm ductsDrop-Off Kit, squarefor 50 x 50mm branch tube215 x 105 x 95mm28SUHNER FIBEROPTIC

SIDE DROP-OFF KITSOrdering information Part No UnitDimensions (WxHxL)Drop-Off Kit, square TC1279-93KIT 1for 50 x 50mm branch duct230 x 110 x 60mmTop Outlet, square TC1279-307A 1for 100 x 100mm branch ductDrop-Off Kit TC1279-87KIT 1for 220 and 100 x 100mm ductsDrop-Off Kit, squarefor 50 x 50mm branch tube160 x 95 x 60mmSide drop-off kitsLISASUHNER FIBEROPTIC29

SIDE AND TOP DROP-OFF KITSOrdering information Part No UnitDimensions (WxHxL)Ramp-Off for 220 & 100mm ducts TC1279-42KIT 1210 x 98 x 40mmDual Drop-Off Kit TC1279-93DKIT 1square, with ramp2x 50 x 50mm branch ductSide and top drop-off kits90° downDrop-Off Kit TC1279-MH1KIT 1for 220 and 100 x 100mm ductsdrop-off kit, squarewith ramp, for 50 x 50mm branch duct230 x 110 x 60mmLISADrop-Off Kit TC1279-290A 1for 300, 220 and 100 x 100mm ductstop outlet, squarefor 100 x 100mm branch duct279 x 102 x 144 mm30SUHNER FIBEROPTIC

BREAKOUT ASSEMBLIESOrdering information Part No UnitDimensions (WxHxL)Break-Out Kit TC1279-93A 1for 100 x 50 mm ductfor 50 x 50mm branch tube145 x 55 x 45 mmBreak-Out Kit TC1279-218A 1for 220 and 100 x 100mm duct202 x 104 x 90 mmBreak-Out Kit for 220, 100 TC1279-232A 1and 100 x 50mm ducts202 x 51 x 88 mmBreakout assembliesLISASUHNER FIBEROPTIC31

FLEXIBLE TUBESUsed for feeding, entering or exiting fibers from the ducting into equipmentracks. All tubes are convoluted or ribbed to allow adjustment ifdrops cannot be positioned exactly over or under equipment.Ordering information Part No UnitDimensions (WxHxL)Convoluted Tube, flexible TC1279-26 144mm ID/50mm OD, 1000mmConvoluted Tube, flexible TC1279-53 144mm ID/50mm OD, 2000mmFlexible TubesConvoluted Tube, flexible TC1279-68 132mm ID/38mm OD, 2000mmLISAConvoluted Tube, flexible TC1279-54 120mm ID/ 25mm OD x 2000mmConvoluted Tube, split, flexible TC1279-100 117mm ID/20mm OD, 2000mmConvoluted Tubing Adapter Kit TC1279-68KIT 150 to 30mm, 2000mm32SUHNER FIBEROPTIC

FLEXIBLE TUBESOrdering information Part No UnitDimensions (WxHxL)Convoluted Tube, flexible TC1279-85 170 x 70 x 350mmsquare 50 x 50mm, 350mmConvoluted Tube, flexible, split TC1279-85KIT 170 x 70 x 350mmsquare 50 x 50mm, 350mmConvoluted Tube, flexible TC1279-88 145 x 45 x 350mmsquare 30 x 30mm, 350mmClip for ø 20mm convoluted tube TC1279-101 112 x 30 x 20mmAdhesive clip used to attach 20mmconvoluted tubing to any surfaceincludes a locating hole at the backto be screwedFlexible tubesLISASUHNER FIBEROPTIC33

MOUNTING HARDWAREType Size/mm 30 x 30 50 x 50 100 x 100 100 x 50 220 x 100 300 x 100Size/Inches 1.25" x 1.25" 2" x 2" 4" x 4" 4" x 2" 8" x 4" 12" x 4"Mounting Bracket TC1279-148A TC1279-147A TC1279-16A TC1279-16A TC1279-15A -Mounting Bracket Kit TC1279-148KIT TC1279-147KIT - - - -C-Support & Clip - - MH1947431 MH1947431 MH1947430 MH1947429Mounting Bracket, TC1279-78KIT TC1279-78KIT - - - -AdhesiveFastening Pads TC1279-79KIT TC1279-79KIT TC1279-79KIT TC1279-79KIT TC1279-79KIT TC1279-79KITSupport Clip - Clip1 - 50 Clip1 - 100 Clip1 - 100 Clip1 - 220 -Ordering information Part No UnitDimensions (WxHxL)Enables the duct support bracket to be bolted to any othermounting bracket.Mounting hardwareMounting Bracket, 220mm TC1279-15A 1incl. mounting material40 x 30 x 250mmMounting Bracket, 100mm TC1279-16A 1incl. mounting material40 x 30 x 120mmLISAMounting Bracket, 50mm TC1279-147A 1incl. mounting material20 x 25 x 68mmMounting Bracket, 30mm TC1279-148A 1incl. mounting material20 x 22 x 50mm34SUHNER FIBEROPTIC

MOUNTING HARDWARE4)Ordering information Part No UnitDimensions (WxHxL)1) C-Support100mm MH1947430 1220mm MH1947431 1300 mm MH1947429 13)2) M10 Threaded Rod, 2000mm MH1149461 12)1)3) Threaded Rod connector MH1149466 1B50-M104) Ceiling Support Kit MH1149476 1Support Clip220mm duct, 30 x 20 x 40mm Clip1-220 1100mm duct, 30 x 20 x 40mm Clip1-100 150mm duct, 30 x 20 x 40mm Clip1-50 1Mounting hardware5)5) Ceiling Console MH1149136 1LISA6) Wall Console180mm MH1149121 1280mm MH1149122 16)SUHNER FIBEROPTIC35

MOUNTING HARDWAREOrdering information Part No UnitDimensions (WxHxL)Mounting Bracket Kit, 50mm TC1279-147KIT 1incl. mounting material30 x 30 x 100mmMounting Bracket Kit, 30mm TC1279-148KIT 1incl. mounting material30 x 25 x 100mmMounting Bracket, adhesive TC1279-78KIT 150 & 30mm duct30 x 20 x 40mmAllows simple adjustment with smallerducting systemsVelcro Fastening Pads for ducts TC1279-79KIT 1636 x 45 x 20mmTo fix ducting in any location againsta flat surfaceLISAPigtail Radius Guide Kit, R35mm TC1279-72KIT 1046 x 46 x 6 mm90° degree formerinterlock mechanism for U-turnscircles & spiralsUniversal Radius Guide Kit, R30mm TC1279-156 155 x 26 x 48 mmFor routing patchcords around a90° corner36SUHNER FIBEROPTIC

TOOLINGTool kits are available for cutting, slotting and providing cut-outs for drop components.Ordering information Part No UnitDimensions (WxHxL)Cut-Out Tool Kit TC1279-50KIT 1 set220 & 100mm ductTo provide openings in 100 or 220mm ductto suit 50mm break out(TC1279-41A, TC1279-89A)Incl. ½ inch ratchet330 x 180 x 160 mmCut-Out Tool Kit TC1279-231KIT 1 set220, 100 & 100 x 50mm ductTo provide openings in 100x50mm100 or 220mm ductto suit 100mm break out(TC1279-41A, TC1279-89AIncl. ½ inch ratchet.400 x 210 x 225 mmToolingSlotting Tool Kit TC1279-51KIT 1 set220 & 100mm duct,To cut slots in 100 or 220mm duct endsto suit standard connectors, e.g. elbowscross connectors, ducts. incl. ½ inch ratchet355 x 130 x 170 mmLISASide Slotting Tool Kit TC1279-230A 1 set100 x 50mm ductTo cut slots in the side of 100 x 50 duct ends110 x 115 x 170 mmSUHNER FIBEROPTIC37

TOOLINGOrdering information Part No UnitDimensions (WxHxL)Slotting Tool & Mitre Box TC1279-140KIT 1 set50 & 30mm ductTo cut slots in 50 & 30mm duct endsto suit standard connectors, e.g. elbowscross connectors, ducts.The mitre box ensures a true 90° cut is achieved330 x 160 x 180 mmSlotting Tool & Mitre Box TC1279-118KIT 1 set50mm ductTo cut slots in 50mm duct endsto suit standard connectors, e.g. elbowscross connectors, ducts.The mitre box ensures a true 90° cut is achieved295 x 135 x 140 mmToolingSlotting Tool & Mitre Box TC1279-119KIT 1 set30mm ductTo cut slots in 30mm duct ends,to suit standard connectors, e.g. elbows,cross connectors, ducts.The mitre box ensures a true 90° cut is achieved.380 x 85 x 330 mmLISA38SUHNER FIBEROPTIC

INDEXAdapter assemblies 26Breakout assemblies 31Ducts with lids 5Ducting Raceway Size 4End covers 24Fiber storage loops 22Flexible tubes 32Horizontal centering adapters 21Horizontal crosses 13Horizontal elbows 15Horizontal tees 11Joiners 7Mounting hardware 34Vertical elbows 17Vertical tees 9Side and top drop-off kits 30Side drop-off kits 28Straight Ducting Raceway 4Tooling 37IndexLISASUHNER FIBEROPTIC39

HUBER+SUHNER is certified accordingto ISO 9001 and ISO14001.WAIVERWhile the information contained in this folder has been carefully compiled to the best ofour present knowledge, it is not intended as representation or warranty of any kind onour part regarding the suitability of the products concerned for any particular use or purposeand neither shall any statement contained herein be construed as a recommendationto infringe any industrial property rights or as a license to use any such rights. Thesuitability of each product for any particular purpose must be checked beforehand withour specialists.HUBER+SUHNER AGFiber Optics DivisionCH-9100 HerisauPhone +41 (0)71 353 41 11Fax +41 (0)71 353 46 78www.hubersuhner.com