User Manual CONVISION Cymanager
User Manual CONVISION Cymanager User Manual CONVISION Cymanager
5-1 Screen mode and channel mapping f. Display setting Interval for display sequencing Configure how channel name on video window is displayed Motion icon Recording icon: - Recording Icon (red bullet) is displayed on the video window when corresponding video channel is being recorded Motion icon: - Motion icon is displayed on the video window when motion is detected on the corresponding video channel Statistics: - Audio/Video statistics are display at the bottom of all video windows Server time: - Server time for the channel is displayed on the lower-left corner of each display unit Recording icon
5-1 Screen mode and channel mapping Stop video display of Cymanager when Cysearch is running (Useful when PC is overloaded by running Cymanager and Cysearch together Control the number of frames to be buffered for smooth display - Small: delay is small, but smoothness may not be good - Large: delay is large, but video is more smooth Display key(I) frames only (See below) Aspect ratio mode - To stretch to fill display unit or - Keep aspect ratio of the frame Select display mapping mode To display sensor and alarm nodes on Tree View Deinterlacing mode Key frame only display mode This mode is provided to reduce CPU load when large number of servers are connected and screen configuration mode displays more than 4 channels at the same time. Full frames are displayed in the following cases even when this mode is enabled: (1) 1x1 mode, 2x2 mode: because only 4 channels are displayed (2) Currently selected(highlighted) channel in any screen mode: to provide interactivity in PTZ control
- Page 1 and 2: User Manual CONVISION Cymanager Iss
- Page 3 and 4: 1. Cymanager Overview � Cymanager
- Page 5 and 6: PC time 3. Main Screen Configuratio
- Page 7 and 8: 4-2 Finding servers with IP Discove
- Page 9 and 10: 4-4 Managing server connection usin
- Page 11 and 12: 5-1 Screen mode and channel mapping
- Page 13: 5-1 Screen mode and channel mapping
- Page 17 and 18: 5-1 Screen mode and channel mapping
- Page 19 and 20: 5-2 Adjusting video input Adjustabl
- Page 21 and 22: 5-4 PTZ control & preset PTZ Contro
- Page 23 and 24: 5-5 Event and alarm b. Event Search
- Page 25 and 26: 5-5 Event and alarm d. Alarm(relay)
- Page 27 and 28: 5-6 Still image capture Press Captu
- Page 29 and 30: 6. Recording 1) Overview Features o
- Page 31 and 32: 2 3 6. Recording 3) Recording mode
- Page 33 and 34: 6. Recording 5) Recording control(O
- Page 35 and 36: 7. Search and Playback 2) Cysearch
- Page 37 and 38: 7. Search and Playback 4) Search by
- Page 39 and 40: 7. Search and Playback When the pla
- Page 41 and 42: 1 7. Search and Playback 7) Backup
- Page 43 and 44: 8. EMap 1) Overview TMAP applicatio
- Page 45 and 46: 8. EMap 3) Adding and displaying ma
- Page 47 and 48: 8. EMap 5) Placing cameras on the m
- Page 49 and 50: 8. EMap 7) Pop-up video and PTZ con
- Page 51 and 52: 9. Security 1) Overview User authen
- Page 53 and 54: 9. Security 3) User account managem
- Page 55 and 56: 10. Other Functions 2) Saving and l
- Page 57 and 58: 10. Other functions 5) Statistics P
- Page 59 and 60: 11. Trouble Shooting 1) Cymanager o
5-1 Screen mode and channel mapping<br />
f. Display setting<br />
Interval for<br />
display<br />
sequencing<br />
Configure how channel name<br />
on video window is displayed<br />
Motion icon<br />
Recording icon:<br />
- Recording Icon (red bullet) is displayed<br />
on the video window when corresponding<br />
video channel is being recorded<br />
Motion icon:<br />
- Motion icon is displayed on the<br />
video window when motion is detected<br />
on the corresponding video channel<br />
Statistics:<br />
- Audio/Video statistics are display at the<br />
bottom of all video windows<br />
Server time:<br />
- Server time for the channel is displayed<br />
on the lower-left corner of each display<br />
unit<br />
Recording icon
Change language