Using Oil Mounting Station with EverSmart Scanners - Kodak

More documents

Recommendations

Info

♦Mount an oil-mounting mask in the station without originals. Insertthe mask registration holes into the registration pins of the station.Mask mounted in the oil mounting station♦Remove the scanner base glass and place it on the station, then closethe station cover.Note: To ensure the tight closure of the station cover and the elasticity of thesealing strip, you should, from time to time, apply a layer of substance, suchas Vaseline, on the inner parts of the sealing strip.Mounting scanner base glass in the oil mounting station♦Carefully clean each transparency with film cleaner and scannerwipes before mounting.6 Using Oil Mounting Station with EverSmart Scanners
♦Tape one side of the transparency to the base glass, emulsion sidedown. Use the pre-cut mask windows to position the transparenciesaccurately.Taping transparencies to the base glass♦After mounting all the transparencies, spread oil under and on eachtransparency.Note: If you are using oil mounting fluid that is more liquid, such as Kami SXL2001, it is enough to spread it on the transparencies. In this case, the liquid fluidwill spread under the transparencies as well.Using the Oil Mounting Station 7
Page 1 and 2: NetworkingParallel processingComput
Page 3 and 4: TRADEMARKSScitex, the Scitex logo a
Page 5 and 6: 1 INTRODUCTIONOverviewThe oil mount
Page 7 and 8: 2 USING THE OIL MOUNTING STATIONThe
Page 9: Mounting Transparencies with Oil-Mo
Page 13 and 14: ♦Wipe remaining oil with absorben
Page 15: Mounting Transparencies without Mas

Using Oil Mounting Station with EverSmart Scanners - Kodak

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?