Contents - Peavey.com

Effects can be added to the current end of the effect chain, or any existing effect can be changed to anothertype. Any attempt to add an effect beyond the end of the existing chain or to duplicate an existing effect willbe ignored by the unit.FXJIPE 1: CompressorThis conmand allows remote access to the Compressor parameters. The data is stored as follows:PRAMI0 = Attack Time1 = Release Time2 = Sustain3 = Level4 = Noise Gate Threshold (O-9 => l-10)FXJ’YPE 2:DistortionPRAM0 = Drive1 = Post Gain2 = Fat (Bottom)3 = Edge4 = Body5 = Shift6 = Kesonance (units) \ may be loaded as 1 byte or 2 bytes of data7 = Resonance (tenths) /FXJIT’E 3:OverdrivePRAM0 = LoRollOff (units) \ may be loaded as 1 byte or 2 bytes of data1 = LoRollOff (tenths) /2 = PreDrive3 = Clip Level4 = Output LevelFX-f’KPE 4:cJ9ou;usPKAM0 = Rate (units) \ may be loaded as 1 byte or 2 bytes of data1 = Rate (Tenths) /2 = Depth3 = Delay (units) \ may be loaded as 1 byte or 2 bytes of data4 = Delay (tenths) /Appendix D Remote Editing with SysEx D-3