Contents - Peavey.com

2. Occasiordy, plugging directly into ;I guitar :mplifier may overlod the input slightly. This won’t clmxgcthe :tmplifier, lxrt it will cause unwanted distortion of the signal. To cc m-ect this overload cc mdition, ptwsthe Global button until the following display appears:Move the cursor under Out. This ~dlows you to change the output level ofthe Tulx Fcx. Press the v lxlttonuntil you find a level where the unwanted distortion disappears (this usually h;ippt’ns when the (mtputle\d is around 7). If you x-e using 21 power mip, you may want to increase the outp~rt led by prc’ssingthe A button. See the section titled Adjusting the Global Input and Output Levels and Global EQ,on page 16 for more inforniation.3. (Optiond) To send and receive MIDI information it is necesmy to properly set up the Tc11x Fex../JPress the Global button several times (the display shodd show [MIDI] in the upper rigllt hmcl corner>.The first parxneter, RC, sets the MIDI Receive channel. IJse the V and A buttons to dunge this tothe desired channel.4. Okay. Now it’s time to pl;ly..e Start playing your g:uitar: as you play, turn the Tube Fex’s Post Gain/Global Output Level knollclockwise until you reach the desired level. The Tube Vex’s display will show tlje current p:ltcyhnuml->er. To select a different patch, use the 7 and A buttons.5. That’s it, you’re done. (That wxm’t so 1~~1, was it?)