12.07.2015 Views

Contents - Peavey.com

Contents - Peavey.com

Contents - Peavey.com

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Appendix A Individual EffectsThe Tube effect uses the two 12AX7 tubes to alter the audio signal in a more traditional manner. TheTube effect has four modes (or voices) to select from. These are accessed by using the Mode button.Note: To change the tube mode you must be in Play Mode (accessed by pressing the Play button), Edit Mode(accessed by pressing the Edit button), or the Tube page (accessed when you press the Edit buttona second time to begin editing the Tube parameters).Configuration whenTB is on front end ofeffects chain________________________________________-,Tube Preamp i: PreDistortion(Tubes)‘------------------________________________________________________________________ISolid-State Preamp i i’ADZ/* DSPL All other settingsNote: The Global Input Level is non-functional when the Tube (TB) is at the front of the effects chain.a CLEANA CRUNCHh LEADfi ULTRATwo gain stages and a passive EQ to achieve clean to slightly distorted tones.Three gain stages and a passive EQ for medium distortion amounts.Four gain stages and a passive EQ for high gain distortion.Same as Lead, except with active EQ, allowing for greater tonal variation.ParametersmPd:Pt:The Pr @regain) parameter adjusts the amount of gain the signal has before entering the tubes.Range is O-100. When TB (tube) is present in a chain, turning the Pre Gain knob will alter thisparameter’s value even if you are not directly editing the TB parameters.The Pd (Pad) parameter changes gain of first tube stage without effecting tone. Select either Hi(for distortion) or Lo (for clean).The Pt (Postgain) parameter adjusts the amount of gain the signal has as it leaves the tubes.Range is O-100. When TB (tube) is present in a chain, turning the Post Gain knob will alter thisparameter’s value even if you are not directly editing the TB parameters.Note: The previous three parameters apply to all four tube modes; however, the following four parameters(Bs, Mi, Tr, Ps) change to (Bt, Bd, Sd, Sh), respectively, when ULTRA is selected as the mode.Appendix A Individual Effects A-7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!