Contents - Peavey.com

HOW TO SETUPA CONTIAIUOUS CONTROLLERFor this example let’s walk through the steps required to create a “wah wah” effect using a continuouscontroller pedal. Assuming you have a continuous pedal hooked up to the Tube Fex via a MIDI foot controller,first select or write a patch that has the envelope filter (EF) effect and store it. Then push the Edit button,select EF and push the Edit button again. Next, push the Global button until the following screen is displayed:REIGV Ch=l CMIDIIRC “^ TC TP DP LP DS LSMove the cursor under RC and use the V and A buttons to select channel 1. For this example we will assumeyour foot controller has channel 7 as a continuous channel send. Next push the Global button until thefollowing screen is displayed:Et#.JFLT Frvi CCHTRLI#I P r a m C# Ch SC-Move the cursor under Pram and use the 7 and A buttons to select Freq. Next move the cursor under C#and select Cntrl#=7. Next move the cursor under Ch and select RCV. Next move the cursor under SC andselect +lOO. It is impor&nt to note that the scale can be set from HO0 allowing normal or reverse wah walleffects. You can set the scale anywhere in between to adjust the effect to your tastes. Next press the Edit buttonand move the cursor under Sn and select a sensitivity level. Try +48 to start. Next move the cursor under Fqand select a frequency, try 50. Next move the cursor under Rs and set the resonance, try 52. Next move thecursor under Ty to select a filter, try LP-Slo. Next move the cursor under Mx and try a mix level of 50%. Nowwork the continuous controller pedal to try the effect. Adjust the envelope filter parameters and the scale tosuit your taste. Press the Store button to save the settings and continuous controller to your preset.Note: If you get volume control instead of wah wah, push the Global button until the following screen isdisplayed:VOLUME=100 CVULIrni-di:Ot4 #7 SC=+54Move the cursor under midi and change the setting to OFF. Now try your effect. You can also use the 4-bandparametric EQ to create this effect.26 Chapter 4 Using MIDI