DKG-705 AUTOMATIC MAINS FAILURE AND REMOTE START ...

DATAKOMDKG-705 User’s ManualProgram Group: 9This program group defines the characteristics of the Analog sensors.The DKG-705 unit has 4 analog sensor inputs. These are:-Coolant temperature sensor input,-Oil temperature sensor input-Oil pressure sensor input,-Fuel level sensor input.The analog inputs are capable of measuring resistor values between 0 and 5000 ohms. Thanks tothe programmable characteristics, the DKG-705 may be adapted to any brand and type of sensor.Each sensor’s characteristics are defined using a maximum of 8 known points. Each point consistsof a pair of value, the first being the resistor value and the second being the corresponding analogmeasurement. For each sensor, 16 program parameters are reserved. Using defined points, the DKG-705applies a linear approximation algorithm to find the analog value corresponding to an unknown resistorvalue.For a given sensor, the points must be entered in the increasing order of resistorvalues, or faulty measurements may occur.If less than 8 points are used, unused point resistor values must be entered as ‘0’.Group Parameter Definition9 900-915 Coolant Temperature9 920-935 Oil Temperature9 940-955 Oil Pressure9 960-975 Fuel Level705-UE.doc - 47 -