DKG-705 AUTOMATIC MAINS FAILURE AND REMOTE START ...

DATAKOMDKG-705 User’s ManualProgram Group: 8This group defines the functions of relay outputs. The DKG-705 base unit has 7 relay outputs. Therelays may be extended up to 23 using Relay Extension Modules.The function of a given relay output may be selected from a list of 112 entries. Here are the usualfunctions of the internal relays.Group Parameter Definition Terminal Description / Usual Function8 800 Relay 0 function -This relay output is not provided8 801 Relay 1 function 36 Auxiliary relay output, mostly used as Preheat output.8 802 Relay 2 function 33 Start relay output.8 803 Relay 3 function 37 Auxiliary relay output, mostly used as Alarm output.8 804 Relay 4 function 1 Generator contactor relay output.The common terminal of the internal relay isconnected to the generator phase U.8 805 Relay 5 function 10 Mains contactor relay output.The common terminal of the internal relay isconnected to the mains phase R.8 806 Relay 6 function 32 Fuel relay output.This relay output feeds also the chargealternator excitation circuit.8 807 Relay 7 function 35 Auxiliary relay output, mostly used as Activate toStop output.8 808 Relay 8 function8 809 Relay 9 function8 810 Relay 10 function8 811 Relay 11 function8 812 Relay 12 function8 813 Relay 13 function8 814 Relay 14 function8 815 Relay 15 function8 816 Relay 16 function8 817 Relay 17 function8 818 Relay 18 function8 819 Relay 19 function8 820 Relay 20 function8 821 Relay 21 function8 822 Relay 22 function8 823 Relay 23 function- These relays are found on the first Relay ExtensionModule.- These relays are found on the second RelayExtension Module.705-UE.doc - 45 -