DKG-705 AUTOMATIC MAINS FAILURE AND REMOTE START ...

More documents

Recommendations

Info

DATAKOMDKG-705 User’s ManualProgram Group 4Group Parameter Definition Min Max Description4 400, 402,404,406,408, 410,412, 4144 401, 403,405,407,409, 411,413, 415Turn_on - - Weekly schedule turn_on times. The day andtime information is defined in 15 minute steps.Turn-off - - Weekly schedule turn-off times. The day andtime information is defined in 15 minute steps.4 416-431 Telephone number #1 - - Each program parameter changes one digit ofthe first telephone number. The parameter 416points to the first digit of the number, theparameter 417 points to the second digit etc…Non-numeric characters will be skipped.4 432-447 Telephone number #2 - - Each program parameter changes one digit ofthe second telephone number. The parameter432 points to the first digit of the number, theparameter 433 points to the second digit etc…Non-numeric characters will be skipped.Program Group 5Group Parameter DefinitionUnit Min Max Description5 500 Wait before Fuel Min. 0 240 This is the time between the mains failsand the fuel solenoid turns on for startingthe genset.5 501 Wait before Start Sec 0 30 This is the time after the fuel solenoid isenergized and before the genset isstarted. This will be the preheat period ifglow plugs are used.5 502 Wait between Starts Sec 1 30 This is the waiting period between twostart attempts.5 503 Start Timer Sec 1 15 This is the maximum start period. Startingwill be automatically cancelled if thegenset fires before the timer.5 504 Start Attempts - 1 6 This is the maximum number of startattempts.5 505 Stop Timer Sec 0 90 This is the maximum time duration forthe engine to stop. For Activate to Stoptype engines this will be the periodduring which the stop solenoid isenergized. If the genset has not stoppedafter this period, a FAIL TO STOP alarmwill occur.5 506 Mains Waiting Timer Min. 0.0 60.0 This is the time between the mainsvoltages and frequency entered within thelimits and the generator contactor isdeactivated.5 507 Cooling Timer Min. 0.0 30.0 This is the period that the generator runsfor cooling purpose after the load istransferred to mains.5 508 Mains Contactor Timer Sec 0.5 15.0 This is the period after the generatorcontactor has been deactivated andbefore the mains contactor has beenactivated.705-UE.doc - 36 -
DATAKOMDKG-705 User’s ManualGroup Parameter DefinitionUnit Min Max Description5 509 Gen. Contactor Timer Sec 0.5 120 This is the period after the mainscontactor has been deactivated andbefore the generator contactor has beenactivated.5 510 Overcurrent Limit Amp 20 2500 If the current is over this limit, anAlternator Overcurrent alarm will begenerated after the Overcurrent Timer(P511) period.5 511 Overcurrent Timer /Excess Power TimerSec 1 20 This is the period between the currentgoes over the Overcurrent Limit (P510)and the Alternator Overcurrent alarmoccurs.This is also the period between the gensetpower goes over the Excess PowerLoad Dump Limit (P617) and the GenExcess Power Load Dump occurs.5 512 Mains Low Limit Volt 0 240 If one of the mains phases goes underthis limit, it means that the mains areoff and it starts the transfer to thegenset in AUTO and TEST modes.5 513 Mains High Limit Volt 100 300 If one of the mains phases goes overthis limit, it means that the mains areoff and it starts the transfer to thegenset in AUTO and TEST modes.5 514 Gen Low Limit Volt 60 240 If one of the generator phase voltagesgoes under this limit when feeding theload, this will generate a Genset LowVoltage Alarm and the engine will stop.5 515 Gen High Limit Volt 100 300 If one of the generator phase voltagesgoes over this limit when feeding the load,this will generate a Genset High VoltageAlarm and the engine will stop.5 516 Low Freq. Shutdown Hz 10 60 If the genset frequency goes under thislimit for Frequency Timer (P520) period,this will generate a Genset Under-Frequency Alarm and the engine willstop.5 517 Low Freq. Warning Hz 10 60 If the genset frequency goes under thislimit for Frequency Timer (P520) period,this will generate a Genset Under-Frequency Warning.5 518 High Freq. Shutdown Hz 40 150 If the genset frequency goes over this limitfor Frequency Timer (P520) period, thiswill generate a Genset Over-Frequency Alarm and the engine willstop.5 519 High Freq. Warning Hz 40 150 If the genset frequency goes over this limitfor Frequency Timer (P520) period, thiswill generate a Genset Over-FrequencyWarning.5 520 Frequency Timer /Engine rpm TimerSec 1 20 This is the period between the gensetfrequency or engine rpm goes out of thelimits and an alarm occurs.5 521 Horn Timer Sec 0 240 This is the maximum period during whichthe alarm relay output may stay active.If the period is set to 0, this will meanthat the delay is unlimited.705-UE.doc - 37 -
Page 1 and 2: DATAKOMDKG-705 User’s ManualGense
Page 3 and 4: DATAKOMDKG-705 User’s Manual1. IN
Page 6 and 7: DATAKOMDKG-705 User’s Manual2. IN
Page 8 and 9: DATAKOMDKG-705 User’s ManualTerm
Page 10 and 11: DATAKOMDKG-705 User’s Manual3.2 D
Page 12 and 13: DATAKOMDKG-705 User’s Manual3.3 S
Page 14 and 15: DATAKOMDKG-705 User’s Manual4.1 S
Page 16 and 17: DATAKOMDKG-705 User’s Manual4.3 W
Page 18 and 19: DATAKOMDKG-705 User’s Manual5. MO
Page 20 and 21: DATAKOMDKG-705 User’s Manual6. SY
Page 22 and 23: DATAKOMDKG-705 User’s Manual7. LO
Page 24 and 25: DATAKOMDKG-705 User’s ManualThe D
Page 26 and 27: DATAKOMDKG-705 User’s Manual8. PA
Page 28 and 29: DATAKOMDKG-705 User’s Manual10. P
Page 30 and 31: DATAKOMDKG-705 User’s Manual11. L
Page 32 and 33: DATAKOMDKG-705 User’s Manual13. E
Page 34 and 35: DATAKOMDKG-705 User’s Manual17. P
Page 38 and 39: DATAKOMDKG-705 User’s Manual5 522
Page 40 and 41: DATAKOMDKG-705 User’s ManualGroup
Page 46 and 47: DATAKOMDKG-705 User’s ManualNo: F
Page 48 and 49: DATAKOMDKG-705 User’s ManualProgr
Page 50 and 51: DATAKOMDKG-705 User’s Manual10 A2
Page 52 and 53: DATAKOMDKG-705 User’s ManualProgr
Page 54 and 55: DATAKOMDKG-705 User’s ManualThe e
Page 56 and 57: DATAKOMDKG-705 User’s Manual20. T
Page 58: DATAKOMDKG-705 User’s ManualGense

DKG-705 AUTOMATIC MAINS FAILURE AND REMOTE START ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?