DKG-705 AUTOMATIC MAINS FAILURE AND REMOTE START ...

DATAKOMDKG-705 User’s ManualGroup DefinitionLevel Description1 Set date and time 1 Unit’s internal date and time used for eventlogging.2 Change Password 1 Changes password. Only the password ofthe current level may be changed.3 Site ID 1 20 character ASCII string defining the gensetlocation. This string is used in modem callsand SMS operation.4 Weekly Schedule Programs and Telephonenumbers1 8 sets of turn-on and turn-off times for AUTOmode.2 telephone numbers of 16 digits maximumused for modem calls and SMS operation.5 Generator Control 1 Basic timers and operation limits.6 Configuration 2 The factory configuration parameters of thegenset.7 Input Definitions 2 The parameters which define the function of8 programmable digital inputs.8 Relay Definitions 2 The parameters which define the function of24 possible relays.9 Sensor calibration 2 Calibration points information for each of the4 analog sensor inputs.A Operation Mode 3 No Break transfer, parallel with mains, AVRand GOV control parameters.B Input Calibration 3 Voltage and current input calibrationparameters.Program Group 1Group Parameter Definition Min Max Description1 100 Set Date 00 99 Sets date of month (1-31)1 101 Set Month 00 99 Sets month (1-12)1 102 Set Year 00 99 Sets year. Only the last 2 digits are used.1 103 Set Hour 00 99 Sets hour (00-23)1 104 Set Minute 00 99 Sets minute (00-59)1 105 Set Second 00 99 Sets second (00-59)Program Group 2Group Parameter Definition Min Max Description2 200 Change Password 0 65535 Changes the current level’s password.Program Group 3Group Parameter Definition Min Max Description3 300-319 Site ID - - Each program parameter changes onecharacter of the SITE ID string. Theparameter 300 points to the first characterof the string, the parameter 301 points to thesecond character etc…705-UE.doc - 35 -