Vapour Phase Soldering System WAM 3000 Operating Instructions

Page 8Technical dataDimensions : (L x W x H) 615 x 490 x 950Mains voltage: 230 V/50 HzPower consumption : 2 kWMains fuse: 10 AWeight: 80 kgMax. format item soldered : (L x W x H) 300 x 300 x 55Max. weight item soldered : 1 kg2. Placing in operation2.1 Prior to placing in operationCompare the mains supply with the information on the rating plate. If the mains voltage iscorrect, connect the system to the mains (20). Switch on the system at the mains switch(19).=> "OFF" is indicated on the display and the "POWER" LED flashes.Press "POWER" button on the control panel (1). The device is in the ready mode. For anoverview and description of the function buttons, see 3. Control panel; page 10=> "POWER" LED illuminates.Press the "UNLOCK" button to unlock the lid (3) and then open the lid. The workpiececarrier (5) is in the top position. Remove transport lock.Important! Remove transport locks..1. Cut the cable tie (23) for fixing the workpiece carrier (5) and remove from thetank.2. The transport slide for the workpiece carrier (lift) is secured with a redclamping screw (24). Unscrew the clamping screw and remove from thetank.Close lid (3).Cooper Tools GmbHCarl-Benz-Str. 2, 74354 Besigheim, GermanyTel: 07143/580-0; Fax 07143/580-108www.cooperhandtools.com/europe