PMI Piranha G2 Manual - Paintball Solutions

More documents

Recommendations

Info

V E LOCITY ADJUSTMENT ON THE PMI PIRA N H A WARNINGAll paintball markers must be chronographed regularly. Adjust marker to shoot paintballs at a velocity that is lessthan 300 feet per second (fps) and that does not exceed the velocity limit set by the paintball park where themarker is in use.Chronograph the marker at regular intervals during the day, as well as any time the power source is refilled orchanged, any time the barrel or any part in the power system is changed, and upon request of any player or gameofficial.1. Chronograph the marker using standard chronograph procedures and following safety rules. Shooting velocity willvary based upon many factors.2. Adjust velocity by using a 3 / 16" allen wrench to turn the velocity adjuster. Figure 6. Turn adjuster clockwise to raisevelocity. Turn adjuster counterclockwise to lower velocity. Figure 7. Turning the velocity adjuster changes theamount of tension on the hammer spring. The hammer spring may be changed for additional velocity adjustment;insert stiffer spring to raise velocity and less stiff spring to lower velocity (red spring is stiffer than blue spring).IncreasesvelocityDecreasesvelocityFigure 6 3 / 16" allenis used to adjust velocity.Figure 7 Clockwise increasesvelocity. Counterclockwisereduces velocity.PMI Piranha 8
The hammer spring assembled with the PMI Piranha paintball marker is intended to provide appropriate shootingvelocity for most outdoor paintball game situations and will provide a range of velocities suitable for most conditions.Shooting velocity will vary based upon form of regulated compressed gas or air used to power the marker, outsidetemperature, and other factors. Additional hammer springs of varying spring stiffness are available for furthervelocity adjustment.DO NOT EXCEED 300 FEET PER SECOND (fps) VELOCITY.The PMI Piranha paintball marker power system may be used with CO 2 , regulated nitrogen, or regulated compressedair.Operating pressure range: 650 p.s.i. to 800 p.s.i.Recommended maximum input pressure is 800 p.s.i.DO NOT EXCEED RECOMMENDED INPUT PRESSURE.3. Chronograph the marker after every velocity adjustment.4. Chronograph the marker at regular intervals during the day, as well as any time the power source is refilled orchanged, any time the barrel or any part in the power system is changed, and upon request of any player orgame official.SAFETY FIRST!Use a Barrel Plug!PMI Piranha 9
Page 1 and 2: PMI PIRANHA OWNER’S MANUALWARNING
Page 3 and 4: All paintball markers must be chron
Page 5 and 6: 8. Before attaching power source, r
Page 7: WARNINGA COMPRESSED GAS OR AIR CYLI
Page 11 and 12: PMI PIRANHA PARTS LOCATIONBarrelPow
Page 13 and 14: Figure 9Shown: PMI Piranha VTLVerti
Page 15 and 16: MAINTENANCE OF THE PMI PIRANHAThe P
Page 17 and 18: MAINTENANCE OF THE PMI PIRANHAREASS
Page 19 and 20: ADVANCED MAINTENANCE PROCEDURESWARN
Page 21 and 22: TROUBLESHOOTINGWARNINGDO NOT ATTEMP
Page 23 and 24: TROUBLESHOOTINGPAINTBALLSNot flying
Page 25: REPAIR PROCEDUREORIGINAL SALES PURC

PMI Piranha G2 Manual - Paintball Solutions

Create successful ePaper yourself

Delete template?

Save as template?