PMI Piranha G2 Manual - Paintball Solutions

ADVANCED MAINTENANCE PROCEDURESWARNINGDO NOT ATTEMPT TO PERFORM MAINTENANCE PROCEDURES UNLESS QUALIFIED TO DO SO.CONTACT PMI, INC., FOR REPAIR ASSISTANCE AND INFORMATION REGARDING AUTHORIZED PMI PIRANHAREPAIR FACILITIES.PAINTBALL MARKER POWER SYSTEMS MUST BE REPAIRED OR REPLACED ONLY WITH THE CORRECTPRESSURE RATED COMPONENTS.1. Before disassembly of the marker, remove all paintballs from the marker, barrel, and loader; remove powersource; and remove all gas or air from the power system.2. To remove the bottom line air system (if needed), detach the bottom line ASA from the grip by removing thetwo screws. Figure 27. Then unscrew the threaded connector from the vertical ASA adapter. Figure 28Bottomline ASAGripVertical ASA AdapterThreaded ConnectorFigure 27 Figure 283. To removetrigger frame from the receiver, remove the two largeallen screws under the receiver. One is in front of the trigger guardand one is behind the grip portion of the frame. Figure 29. ThePMI Piranha 19receiver then will disassemble from the triggerframe.LargeAllen ScrewFigure 29LargeAllen Screw